Phenol degradation by anodic oxidation on boron-doped diamond electrode combining TiO_2 Photocatalysis

Boron-doped diamond （BDD） electrocatalysis is combined with photocatalysis using titanium dioxide （TiO2） as a catalyst to improve pollutant-oxidation efficiency. Phenol solution is chosen as model wastewater. Different methods involving BDD and/or TiO2 during the degradation processes are compared. Parameters such as the currency density and initial concentration are varied in order to determine their effects on the oxidation process. Moreover, the degradation kinetics of phenol is experimentally studied. The results reveal the superiority of series combination of BDD and TiO2, especially the treatment process of electrocatalysis and succedent photocatalysis, and the optimum working currency density for electrocatalysis is 25.48 mA/cm2. The removal rate decreases with the increase in the initial phenol concentration and the degradation reaction follows quasi-first-order kinetics equation.

Electrochemical incineration of dimethyl phthalate by anodic oxidation with boron-doped diamond electrode

The anodic oxidation of aqueous solutions containing dimethyl phthalate （DMP） up to 125 mg/L with sodium sulfate （Na2SO4） as supporting electrolyte within the pH range 2.0-10.0 was studied using a one-compartment batch reactor employing a boron-doped diamond （BDD） as anode. Electrolyses were carded out at constant current density （1.5-4.5 mA/cm^2）. Complete mineralization was always achieved owing to the great concentration of hydroxyl radical （-OH） generated at the BDD surface. The effects of pH, apparent current density and initial DMP concentration on the degradation rate of DMP, the specific charge required for its total mineralization and mineralization current efficiency were investigated systematically. The mineralization rate of DMP was found to be pH-independent and to increase with increasing applied current density. Results indicated that this electrochemical process was subjected, at least partially, to the mass transfer of organics onto the BDD surface. Kinetic analysis of the temporal change of DMP concentration during electrolysis determined by High Performance Liquid Chromatography （HPLC） revealed that DMP decay under all tested conditions followed a pseudo first-order reaction. Aromatic intermediates and generated carboxylic acids were identified by Gas Chromatography- Mass Spectrometry （GC-MS） and a general pathway for the electrochemical incineration of DMP on BDD was proposed.

Electrochemical Detection of Clenbuterol in Pig Liver at Pyrrole DNA Modified Boron-doped Diamond Electrode

The direct detection of clenbuterol（CL） in pig liver without any extraction separation at a pyrrole-DNA modified boron-doped diamond（BDD） electrode is reported. The pyrrole-DNA modified BDD electrode has a strong electrocatalytic effect on the redox reaction of CL. One oxidization and two reduction peaks of CL appear at 340. 2, 299. 8 and 166. 6 mV（ versus SCE）, respectively. The pyrrole polymer alone cannot electrocatalyze the above reaction at a BDD electrode ; the electrocatalytic effect of a BDD electrode modified with DNA membrane is unsufficient for the analytical detection of CL; the replacement of boron-doped diamond by glass carbon makes the electrocatalytic reaction impossible ; the redox process is pH dependent. The influences of various experimental parameters on the pyrrole-DNA modified BDD electrode were investigated. A sensitive cyclic vohammetric response for CL was obtained in a linear range from 3.4 × 10^-6 to 5 × 10^ -4 mol/L with a detection limit of 8.5 × 10^-7 mol/L. A mean recovery of 102. 7% of CL in the pig liver sample solution and a reproducibility of 3.2% were obtained.

Electroanalytical Investigation on Paracetamol on Boron-Doped Diamond Electrode by Voltammetry

An electroanalytical method was developed for the direct quantitative determination of paracetamol in tablets based on its oxidation behavior. The electrochemical oxidation and determination of paracetamol were easily carried out on born-doped diamond (BDD) electrode using two voltammetric techniques (CV and DPV). The electrochemical measurements performed by cyclic voltammetric (CV) and differential pulse voltammetry (DPV) techniques were carried out using a cathodically pretreated boron-doped diamond electrode in HClO4 and KClO4 electrolytes. HClO4 was then selected for analytical purposes and scan rate studies were also completed. The oxidation of the paracetamol is found to be irreversible and a diffusion-controlled nature of the paracetamol oxidation peak was established. A linear calibration curve for DPV analysis was constructed in the paracetamol concentration range from 0 μM to 13.87 μM, with 0.16 μM and 0.55 μM as the detection and quantification limit respectively.

Analytical Determination of Benzophenone-3 in Sunscreen Preparations Using Boron-Doped Diamond Electrodes

A new electroanalytical procedure was developed for the determination of Benzophenone-3 (BENZO) in commercial sunscreen as the active ingredient. The procedure is based on the use of electrochemical methods as cyclic and square-wave voltammetry, with boron-doped diamond (BDD) electrodes. The reduction of BENZO in Britton-Robinson buffer (0.1 mol●L–1) using this type of electrode gives rise to one irreversible peak in –1.30 V (versus Ag/AgCl) in presence of cationic surfactant cetyltrimethylammonium bromide (CTABr). The proposed electrochemical method was successfully applied to the analysis of commercially available pharmaceutical preparations.

Electrochemical treatment of wastewater containing chlorophenols using boron-doped diamond film electrodes

The electrochemical treatment of wastewater containing chlorophenols （2-monochlorophenol, 4-monochlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol） was carried out experimentally with synthetic boron-d0ped diamond （BDD） thin film electrodes. Current vs time curves under different cell voltages were measured. Removal rate of COD, instant current efficiency （ICE） and energy consumption were investigated under different current densities. The influence of supporting media is reported, which plays an important role in determining the global oxidation rate. The oxidative chloride is stronger than peroxodisulphate. The electrochemical characteristics of boron-doped diamond electrodes were investigated in comparison with active coating Ti substrate anode （ACT）. The experimental results show that BDD is markedly superior to ACT due to its different absorption properties.

Electrochemical Characteristics and Applications of Boron-Doped Polycrystalline Diamond Film Electrodes

The elcetrochemical characteristics of boron doped polycrystalline diamond thin film (BDF) electrode 4×4 mm 2 in size were studied using cyclic voltammetry and potentiostatic method. The diamond electrode exhibits adequate electrochemical activity and its response current changes linearly with K 3Fe(CN) 6 concentrations. The response current is proportional to the square root of the scan rate, reflecting mass transport controlled by planar diffusion. Stable mass transport can be quickly established within 4s. The BDF electrode provides good resolving power for the determination of lead and cadmium and gives satisfactory results in the analysis of pure water sample.

Boron-Doped Diamond-Film-Based Two-Dimensional Electrode of Electrophoresis Tank

Chemically robust conductive p-type boron-doped diamond （BDD） films are an important electrode material and have been widely applied in electrochemistry. In this study, BDD films are taken as a two-dimensional （2D） electrode in a eleetrophoresis tank system instead of the conventional one-dimensional platinum wire electrode. The theoretical simulations by finite element numerical analysis reveal that the 2D BDD electrodes have relatively high intensity and uniformity of electric field in the tank. Experimentally, the 2D BDD electrodes with smaller size show excellent properties for the separation of DNA fragments. The advantages of the 2D BDD electrodes with chemical inertness, sustainability, high intensity and uniformity electronic field, as well as reduced small size of electrophoresis tank would open a possibility for realizing new generation, high-performance biological devices.

Electrochemical reduction of CO_2 and degradation of KHP on boron-doped diamond electrodes in a simultaneous and enhanced process

In this research a novel electrochemical system using dual boron-doped diamond (BDD) electrodes as the anode and cathode, for the first time, has been developed for CO_2 conversion and wastewater treatment in a synergetic and simultaneous process. On the BDD cathode CO_2 is converted into formaldehyde while in the anodic side organic wastes are decomposed on the BDD anode. Interestingly, when potassium hydrogen phthalate (KHP) was used as the organic model to be degraded in the anodic side, a higher efficiency of formaldehyde generation from CO_2 was observed on the BDD cathode. The enhanced effect of formaldehyde formation in the presence of KHP oxidation suggests that this novel electrochemical system can combine conversion of CO_2 to the form of high-value chemicals and wastewater purification in a simultaneous and harmonious process.

Application of Boron-doped Diamond Film Electrode in Fast Detection of Samonella in Water

[Objective] The study aimed to discuss the application of boron-doped diamond （BDD） film electrode in fast detection of samonella in water. [ Method] Boron-doped diamond film electrode was prepared and used as the working electrode in fast detection of salmonella in water using chronoamberometry, and the oxidation mechanism of the electrode acting on salmonella was discussed. [ Result] Compared with traditional biologi- cal methods, chronoamperometry could detect the number of salmonellae in water more simply, rapidly and sensitively. [ Conclusion] The method of using BDD electrode to detect salmonella quantity will be widely applied in future.

Preparation, characterization and electrochemical properties of boron-doped diamond films on Nb substrates

A series of boron-doped polycrystalline diamond films were prepared by hot filament （HF） chemical vapor deposition on Nb substrates. The effects of B/C ratio of reaction gas on film morphology, growth rate, chemical bonding states, phase composition and electrochemical properties of each deposited sample were studied by scanning electron microscopy, Raman spectra, X-ray diffraction, microhardness indentation, and electrochemical analysis. Results show that the average grain size of diamond and the growth rate decrease with increasing the B/C ratio. The diamond films exhibit excellent adhesion under Vickers microhardness testing （9.8 N load）. The sample with 2% B/C ratio has a wider potential window and a lower background current as well as a faster redox reaction rate in H2SO4 solution and KFe（CN）6 redox system compared with other doping level electrodes.

Electrochemical oxidation of reactive brilliant orange X-GN dye on boron-doped diamond anode

In this study,the electrochemical oxidation of reactive brilliant orange X-GN dye with a boron-doped diamond(BDD)anode was investigated.The BDD electrodes were deposited on the niobium(Nb)substrates by the hot filament chemical vapor deposition method.The effects of processing parameters,such as film thickness,current density,supporting electrolyte concentration,initial solution pH,solution temperature,and initial dye concentration,were evaluated following the variation in the degradation efficiency.The microstructure and the electrochemical property of BDD were characterized by scanning electron microscopy,Raman spectroscopy,and electrochemical workstation;and the degradation of X-GN was estimated using UV-Vis spectrophotometry.Further,the results indicated that the film thickness of BDD had a significant impact on the electrolysis of X-GN.After 3 h of treatment,100%color and 63.2%total organic carbon removal was achieved under optimized experimental conditions:current density of 100 mA/cm2,supporting electrolyte concentration of 0.05 mol/L,initial solution pH 3.08,and solution temperature of 60°C.

Synthesis and characterization of p-type boron-doped IIb diamond large single crystals

High-quality p-type boron-doped IIb diamond large single crystals are successfully synthesized by the temperature gradient method in a china-type cubic anvil high-pressure apparatus at about 5.5 GPa and 1600 K. The morphologies and surface textures of the synthetic diamond crystals with different boron additive quantities are characterized by using an optical microscope and a scanning electron microscope respectively. The impurities of nitrogen and boron in diamonds are detected by micro Fourier transform infrared technique. The electrical properties including resistivities, Hall coefficients, Hall mobilities and carrier densities of the synthesized samples are measured by a four-point probe and the Hall effect method. The results show that large p-type boron-doped diamond single crystals with few nitrogen impurities have been synthesized. With the increase of quantity of additive boron, some high-index crystal faces such as {113} gradually disappear, and some stripes and triangle pits occur on the crystal surface. This work is helpful for the further research and application of boron-doped semiconductor diamond.

Electrolytic Production of NF3 Using Boron-Doped Diamond Anode in Molten NH4F·2HF

The current efficiency for NF3 formation was independent on the current density in the range of 200 to 1,000 mA·cm^2. The average values of NF3 current efficiencies on the BDD （boron-doped diamond） anode with the boron-concentration of 2,500 ppm were 32.3% at 80℃, 63.3% at 100℃ and 59.7% at 120℃. The best current efficiencies for NF3 formation on the BDD anode with boron-concentrations of 2,500, 5,000 and 7,500 ppm were obtained at 100℃ and those were 63.3%, 73.3% and 56.2%, respectively. Although anode effect occurred on the BDD electrodes covered with a part of the surface of the spiculate structure, which had the boron-concentrations higher than 7,500 ppm, it did not take place on the BDD electrodes covered with the surface of diamond structure, even if the BDD electrode had the boron-concentration of 8,000 ppm.

Ohmic and Schottky contacts of hydrogenated and oxygenated boron-doped single-crystal diamond with hill-like polycrystalline grains

Hill-like polycrystalline diamond grains(HPDGs)randomly emerged on a heavy boron-doped p+single-crystal diamond(SCD)film by prolonging the growth duration of the chemical vapor deposition process.The Raman spectral results confirm that a relatively higher boron concentration(~1.1×10^(21) cm^(-3))is detected on the HPDG with respect to the SCD region(~5.4×10^(20) cm^(-3)).It demonstrates that the Au/SCD interface can be modulated from ohmic to Schottky contact by varying the surface from hydrogen to oxygen termination.The current-voltage curve between two HPDGs is nearly linear with either oxygen or hydrogen termination,which means that the HPDGs provide a leakage path to form an ohmic contact.There are obvious rectification characteristics between oxygen-terminated HPDGs and SCD based on the difference in boron doping levels in those regions.The results reveal that the highly boron-doped HPDGs grown in SCD can be adopted as ohmic electrodes for Hall measurement and electronic devices.

Synthesis of Boron-doped Diamond/Porous Ti Composite Materials——Effect of Carbon Concentration

Highly boron-doped diamond films were deposited on porous titanium substrates by hot filament chemical vapor deposition technique. The morphology variation of highly boron-doped diamond films grown on porous titanium substrates was investigated, and the effects of carbon concentration on nucleation density and diamond growth were also studied. The continuous change of surface morphology and structure of diamond film were characterized by scanning electron microscopy. The structures of diamond film and interlayer were analyzed by X-ray diffraction. The quality of boron-doped diamond film was confirmed by visible Raman spectroscopy. The experimental results reveal that surface morphology and quality of boron-doped diamond films are various due to the change of carbon concentration. The thickness of intermediate layer decreases with the carbon concentration increasing.

Differential Pulse Voltammetric Simultaneous Determination of Paracetamol and Omnipaque on Boron Doped Diamond Electrode: Application to Natural Tomato, Carrot, Cucumber Juices and Wastewater

This article describes the use of a boron-doped diamond electrode (BDDE) as an electrochemical sensor for the simultaneous determination of omnipaque (OMP) and paracetamol (PCM) in perchloric acid medium (HClO4 0.1 M) and in complex matrices such as tomato, carrot and cucumber juices and waste water from the Treichville University Hospital. Voltammetric studies allowed us to have well-defined oxidation peaks at distinct potentials of OMP (E = 0.5 V/SCE) and PCM (E = 0.7 V/SCE). Under optimized conditions, well-defined quantities of OMP and PCM, introduced simultaneously by metered additions, gave linear responses in concentration ranges of 259.8 - 467.2 μM for OMP and 58.73 - 116.3 μM PCM. The detection limits obtained are 7.23 μΜ and 3.6 μΜ respectively for OMP and PCM with recovery rates between 85.8% ± 0.1% and 92.6% ± 0.1% for OMP and between 99.9% ± 0.1% and 101.2% ± 0.4% for the PCM. This technique has been successfully used to simultaneously detect these pharmaceuticals in these complex environments. It allows recovery of OMP and PCM respectively up to 97.5% ± 0.0% and 91.6% ± 0.3% in tomato juice;100.0% ± 0.0% and 95.2% ± 0.2% in carrot juice;101.4% ± 0.1% and 97.3% ± 0.3% in cucumber juice;100.1% ± 0.9% and 100.9% ± 0.1% in wastewater. The relevance of this technique for the simultaneous detection of OMP and PCM in tomato, carrot, cucumber juices and in waste water can be studied in the context of the contamination of certain fruits and vegetables by the substances organic pharmaceuticals released into the environment without prior treatment.

A Diamond Electrochemical Cleaning Technique for Organic Contaminants on Silicon Wafer Surfaces

Peroxodiphosphate anion （a powerful oxidant） can be formed in a special water-based cleaning agent through an electrochemical reaction on boron-doped diamond electrodes. This electrochemical reaction was applied during the oxidation,decomposition, and removal of organic contaminations on a silicon wafer surface, and it was used as the first step in the diamond electrochemical cleaning technique （DECT）. The cleaning effects of DECT were compared with the RCA cleaning technique, including the silicon surface chemical composition that was observed with X-ray photoelectron spectroscopy and the morphology observed with atomic force microscopy. The measurement results show that the silicon surface cleaned by DECT has slightly less organic residue and lower micro-roughness,so the new technique is more effective than the RCA cleaning technique.

Direct and Simultaneous Determination of Phenol, Hydroquinone and Nitrophenol at Boron-Doped Diamond Film Electrode

The electrochemical characteristics of multi-component phenolic pollutants, such as phenol （Ph）, hydroquinone （HQ） and 4-nitrophenol （4-NP）, were investigated on boron-doped diamond （BDD） film electrode by differential pulse voltammetry （DPV） technique. A simple and feasible platform was accordingly established for the direct and simultaneous determination of these three phenolic pollutants. Results showed that, Ph, HQ and 4-NP gave obvious oxidation peaks on BDD electrode at the potential of 1.24, 0.76 and 1.52 V, respectively. Each of them displayed good linear relationship between their oxidation peak currents and their corresponding concentrations in a rather wide range coexisting with one or two of the other phenolic pollutants. The detection limits of Ph, HQ and 4-NP were estimated to be as low as 1.82×10^-6, 1.67×10^-6 and 1.44×10^-6 mol·L^-1, respectively. Therefore, a promising direct and simultaneous electrochemical determination method of multi-component phenolic pollutants in wastewater samples was constructed successfully on BDD electrode with advantages being rapid, simple, convenient, sensitive, in situ and inexpensive.

Effect of oxygen terminated surface of boron-doped diamond thin-film electrode on seawater salinity sensing

Tremendous demands for highly sensitive and stable seawater salinometers have motivated intensive research on advanced electrode materials.Boron-doped diamond(BDD)is attractive in terms of its high mechanical stability and chemical inertness,but is usually hindered by its low double-layer capacitance(C_(dl))for seawater salinity detection.Here,inspired by the principle of oxygen-terminated BDD electrode endowing higher C_(dl)than hydrogen-terminated surface,we introduce the oxygen terminated surface by oxygen plasma or reactive ion etch(RIE),and the fabricated oxygen terminated BDD electrodes demonstrate high sensitivity and long-term stability in seawater salinity detection comparing with the hydrogen terminated BDD electrodes.Significantly,the as-fabricated O-BDD-RIE electrodes not only show remarkable enhanced response even better than the commercial platinum black electrodes but also display long-time stability which is weekly verified by continuous monitor for 90 days.The outstanding performance of the oxygen terminated BDD electrodes can be ascribed to the enhancement of C-O surface functional group on C_(dl).In addition,a comprehensive analysis of effective electroactive surface area(EASA)and C_(dl)proves that the surface oxygen is the major factor for the improved C_(dl).In summary,the excellent oxygen terminated BDD electrodes promise potential application in seawater salinity detection.