Tensile strength and failure behavior of rock-mortar interfaces: Direct and indirect measurements

The tensile strength at the rock-concrete interface is one of the crucial factors controlling the failure mechanisms of structures,such as concrete gravity dams.Despite the critical importance of the failure mechanism and tensile strength of rock-concrete interfaces,understanding of these factors remains very limited.This study investigated the tensile strength and fracturing processes at rock-mortar interfaces subjected to direct and indirect tensile loadings.Digital image correlation(DIC)and acoustic emission(AE)techniques were used to monitor the failure mechanisms of specimens subjected to direct tension and indirect loading(Brazilian tests).The results indicated that the direct tensile strength of the rock-mortar specimens was lower than their indirect tensile strength,with a direct/indirect tensile strength ratio of 65%.DIC strain field data and moment tensor inversions(MTI)of AE events indicated that a significant number of shear microcracks occurred in the specimens subjected to the Brazilian test.The presence of these shear microcracks,which require more energy to break,resulted in a higher tensile strength during the Brazilian tests.In contrast,microcracks were predominantly tensile in specimens subjected to direct tension,leading to a lower tensile strength.Spatiotemporal monitoring of the cracking processes in the rock-mortar interfaces revealed that they show AE precursors before failure under the Brazilian test,whereas they show a minimal number of AE events before failure under direct tension.Due to different microcracking mechanisms,specimens tested under Brazilian tests showed lower roughness with flatter fracture surfaces than those tested under direct tension with jagged and rough fracture surfaces.The results of this study shed light on better understanding the micromechanics of damage in the rock-concrete interfaces for a safer design of engineering structures.

Mechanical anisotropy associated with beddings in shale under Brazilian test conditions:Insights from acoustic emission statistics

A comprehensive understanding of shale’s bedding anisotropy is crucial for shale-related engineering activities,such as hydraulic fracturing,drilling and underground excavation.In this study,seven Brazilian tests were conducted on shale samples at different bedding orientations with respect to the loading direction(0°,45°and 90°)and the disc end face(0°,45°and 90°).An acoustic emission(AE)system was employed to capture the evolution of damage and the temporal-spatial distribution of microcracks under splitting-tensile stress.The results show that the Brazilian tensile strength decreases with increasing bedding inclination with respect to the disc end face,while it increases with the angle between bedding and loading directions.Increasing the bedding inclination with respect to the end face facilitates the reduction in b value and enhances the shale’s resistance to microcrack growth during the loading process.Misalignment between the bedding orientation and the end face suppresses the growth of mixed tensile-shear microcracks,while reducing the bedding angle relative to the loading direction is beneficial for creating mixed tensile-shear and tensile cracks.The observed microscopic failure characteristics are attributed to the competing effects of bedding activation and breakage of shale matrix at different bedding inclinations.The temporal-spatial distribution of microcracks,characterized by AE statistics including the correlation dimension and spatial correlation length,illustrates that the fractal evolution of microcracks is independent of bedding anisotropy,whereas the spatial distribution shows a stronger correlation.The evolution features of correlation dimension and spatial correlation length could be potentially used as precursors for shale splitting failure.These findings may be useful for predicting rock mass instability and analyzing the causes of catastrophic rupture.

Identity(ies)and Transnationalization of Brazilian Evangelical Churches in Portugal:Case study of World Cathedral of Hope and Victory in Christ Churches

The presence of evangelicals in Brazil is a social and religious phenomenon that has aroused interest of many scholars due to its rapid and significant expansion in recent decades and its projection beyond national borders.Among evangelical denominations that stand out in this scenario are Pentecostal churches,which have developed intense missionary activity in several countries,including Europe.In this article,we intend to analyze features and challenges of Brazilian evangelical churches:World Cathedral of Hope(CIME)(Catedral Mundial da Esperança-ICME)and Assembly of God Victory in Christ(ADVEC)(Assembleia de Deus Vitória em Cristo-ADVEC)that operate in Portugal,seeking to understand issues of identity and belonging of these communities,their models of transnationalization,its evangelization strategies and its adaptations to Portuguese context,in the period from 2000 to 2020.

From Rejection to Embracement:The Catholic Perception of Spiritism in Brazil

The history of the relationship between Spiritism and Catholicism in Brazil can be traced through pivotal moments in the trajectory of the First Republic and the religious field since the 19th century,reflecting Brazil’s evolution into a modern,urban,and industrial society.Introduced to Brazil in the 1880s,Spiritism initially faced severe opposition from the Catholic Church,being dismissed as superstition and demon worship due to its engagement with death and spirits.Unlike Christianity,Spiritism denies the divinity of Jesus,the resurrection,and the sanctity of Church sacraments,viewing demons and angels merely as disembodied souls at different spiritual stages.Early perceptions were further complicated by the mixing of Spiritism with African and indigenous rites,which led critics to associate it with madness and mental health threats.However,the relationship between Catholicism and Spiritism in Brazil has evolved positively,particularly following the popularization of Spiritism by figures like Chico Xavier.Modern Brazilian society,characterized by increased education and religious syncretism,has grown more tolerant of diverse practices and beliefs,diminishing historical prejudices against Spiritists.This qualitative study,drawing on scholarly research and first-hand interviews,reveals that Spiritism's acceptance among Brazilian Catholics is due to its convergence with contemporary social values and the evolving profile of the average Catholic.Despite possessing a religion-like character,Spiritism is seen less as a distinct religion and more as a complementary set of practices and beliefs that enhance Catholic faith.This phenomenon mirrors the integration of Agama Hindu practices,reinforcing rather than undermining traditional religious identities.

Abdominoplasty, Liposuction and Brazilian Butt Lift (BBL) in Kinshasa in the Democratic Republic of Congo. My Experience in This Aesthetic Plastic Surgery with Black African Women in a Low-Income Country

Background: In low-income African countries, the demand and use of plastic surgery operations including abdominoplasty, liposuction and Brazilian butt lift (BBL) are increasing. The goal of this work is to present my experience and the challenges of this aesthetic plastic surgery among black African women. Material and Methods: A retrospective study was conducted about the abdominoplasties, liposuctions and Brazilian butt lift (BBL) which I operated in public and private hospitals at Kinshasa (Democratic Republic of Congo) in black African women. It covers a period of 13 years, going from December 1, 2010 to December 1, 2023. For this study, I had at least 6 months period (to Juin 1, 2024) to assess the occurrence of early and late postoperative complications. Results: I performed 84 abdominoplasties, 144 liposuctions and 23 Brazilian butt lifts (BBL). The average age at the time of abdominoplasty was 44 years with extremes ranging from 26 to 55 years and a concentration of cases (60.7%) in the age group of 40 to 49 years. The age group of 20 to 29 years old represented the lowest rate of requests for abdominoplasty (4.7%). Patients with a BMI of 30 to 2 were the majority (61.9%), followed by those between 25 to 2 (29.7%). 67.8% of patients were obese (BMI ≥ 30 kg/m2). The average age at the time of liposuction was 41 years with extremes ranging from 21 years to 69 years;and more than half of cases (68%) in the age group between 30 and 49 years. As for Brazilian butt lift (BBL), the average age was 33 years with extremes ranging from 24 to 42 years and a concentration of patients (91.3%) between 20 and 39 years. The immediate postoperative complications of abdominoplasties observed were: seroma in 7% of cases, hematoma and partial infection of the surgical site in 5% of cases. Pathological scars (hypertrophic, keloid) after abdominoplasties were observed in 9% of cases. The most common complication of liposuction was contour deformity. I observed 16 patients (11.1%) with soft-tissue depressions or elevations, skin panniculus or folds. For Brazalian Butt Lift (BBL), complications like asymmetry for 2 patients (8.9%), contour irregularities for 2 patients (8.9%), and excessive fat removal for 6 patients (26%), had observed. I have not recorded any cases of death or pulmonary embolism. Conclusion: I perform aesthetic plastic surgery procedures in black African women with a high socioeconomic standard of living compared to the average of the general population. The renunciation of planned surgery is motivated by the impossibility of paying the cost of the operation as well as by popular and religious perceptions regarding cosmetic surgery. The results of these aesthetic plastic surgery procedures carried out are very satisfactory for them. The challenges to overcome are mainly threefold: the unforeseeable complications of these cosmetic plastic surgery procedures, popular and religious perceptions of cosmetic surgery as well as the poverty of the population.

SIT.net: SAR Deforestation Classification of Amazon Forest for Land Use Land Cover Application

The process of turning forest area into land is known as deforestation or forest degradation. Reforestation as a fraction of deforestation is extremely low. For improved qualitative and quantitative classification, we used Sentinel-1 dataset of State of Para, Brazil to precisely and closely monitor deforestation between June 2019 and June 2023. This research aimed to find out suitable model for classification called Satellite Imaging analysis by Transpose deep neural transformation network (SIT-net) using mathematical model based on Band math approach to classify deforestation applying transpose deep neural network. The main advantage of proposed model is easy to handle SAR images. The study concludes that SAR satellite gives high-resolution images to improve deforestation monitoring and proposed model takes less computational time compared to other techniques.

Microscopic damage evolution of anisotropic rocks under indirect tensile conditions: Insights from acoustic emission and digital image correlation techniques

The anisotropy induced by rock bedding structures is usually manifested in the mechanical behaviors and failure modes of rocks.Brazilian tests are conducted for seven groups of shale specimens featuring different bedding angles. Acoustic emission (AE) and digital image correlation (DIC) technologies are used to monitor the in-situ failure of the specimens. Furthermore, the crack morphology of damaged samples is observed through scanning electron microscopy (SEM). Results reveal the structural dependence on the tensile mechanical behavior of shales. The shale disk exhibits compression in the early stage of the experiment with varying locations and durations. The location of the compression area moves downward and gradually disappears when the bedding angle increases. The macroscopic failure is well characterized by AE event location results, and the dominant frequency distribution is related to the bedding angle. The b-value is found to be stress-dependent.The crack turning angle between layers and the number of cracks crossing the bedding both increase with the bedding angle, indicating competition between crack propagations. SEM results revealed that the failure modes of the samples can be classified into three types:tensile failure along beddings with shear failure of the matrix, ladder shear failure along beddings with tensile failure of the matrix, and shear failure along multiple beddings with tensile failure of the matrix.

Correction of dynamic Brazilian disc tensile strength of rocks under preloading conditions considering the overload phenomenon and invoking the Griffith criterion

Dynamic tensile failure is a common phenomenon in deep rock practices,and thus accurately evaluating the dynamic tensile responses of rocks under triaxial pressures is of great significance.The Brazilian disc(BD)test is the suggested method by the International Society for Rock Mechanics and Rock Engineering(ISRM)for measuring both the static and dynamic tensile strengths of rock-like materials.However,due to the overload phenomenon and the complex preloading conditions,the dynamic tensile strengths of rocks measured by the BD tests tend to be overestimated.To address this issue,the dynamic BD tensile strength(BTS)of Fangshan marble(FM)under different preloading conditions were measured through a triaxial split Hopkinson pressure bar(SHPB).The fracture onset in BD specimen was captured through a strain gage around the disc center.The discrepancy between the traditional tensile strength(TTS,determined by the peak load P_(f) of the BD specimen)and the nominal tensile strength(NTS,obtained from the load P_(i) when the diametral fracture commences in the tested BD specimen)was applied to quantitatively evaluating the overload phenomenon.The Griffith criterion was used to rectify the calculation of the tensile stress at the disc center under triaxial stress states.The results demonstrate that the overload ratio(s)increases with the loading rate(σ)and decreases with the hydrostatic pressure(σ_(s)).The TTS corrected by the Griffith criterion is independent of theσ_(s)due to the overload phenomenon,while the NTS corrected by the Griffith criterion is sensitive to both the andσ.Therefore,it is essential to modify the tensile stress in dynamic confined BD tests using both the overload correction and the Griffith criterion rectification to obtain the accurate dynamic BTS of rocks.

Effects of 3D deformation and nonlinear stress–strain relationship on the Brazilian test for a transversely isotropic rock

To improve the accuracy of indirect tensile strength for a transversely isotropic rock in the Brazilian test, this study considered the three-dimensional (3D) deformation and the nonlinear stress–strain relationship. A parametric study of a numerical Brazilian test was performed for a general range of elastic constants, revealing that the 3D modeling evaluated the indirect tensile strength up to 40% higher than the plane stress modeling. For the actual Asan gneiss, the 3D model evaluated the indirect tensile strength up to 10% higher and slightly enhanced the accuracy of deformation estimation compared with the plane stress model. The nonlinearity in stress–strain curve of Asan gneiss under uniaxial compression was then considered, such that the evaluated indirect tensile strength was affected by up to 10% and its anisotropy agreed well with the physical intuition. The estimation of deformation was significantly enhanced. The further validation on the nonlinear model is expected as future research.

Analysis of stresses at the center of transversely isotropic Brazilian disk

This article presents the stresses at the center of a Brazilian disk(BD)for transversely isotropic rocks.It is shown that the solution of stresses at the center of an anisotropic disk is a function of the disk radius and the magnitude of applied load,as well as the material orientation with respect to the load axis and two dimensionless ratios with specific physical meanings and limitations.These two dimensionless parameters are the ratios of Young’s modulus and apparent shear modulus,although the ratio of apparent shear modulus will be eliminated if the Saint-Venant assumption is considered.Considerable finite element simulations are carried out to find the stresses at the disk center concerning the material orientation and the two dimensionless parameters.Also,an approximate formula obtained from analytical results,previously proposed in the literature for solving the tensile and compressive stresses at the disk center,is re-written and simplified based on these new definitions.The results of the approximate formula fitted to the analytical results are compared to those obtained from numerical solutions,suggesting a good agreement between the numerical and analytical methods.An approximate equation for the shear stress at the disk center is also formulated based on the numerical results.Finally,the influence of the assumptions for simplification of the proposed formula for the tensile,compressive,and shear stresses at the disk center is discussed,and simple and practical equations are proposed as estimations for the stresses at the center of the BD specimen for low to moderate anisotropic rocks.For highly anisotropic rocks,the reference plots can be used for more accuracy.

Brazilian Spotted Fever Mortality Profile: 2018 to 2022

Background: Spotted Fever (SF) is an acute febrile zoonosis of variable severity that typically occurs in an endemic manner with worldwide distribution. Considering that SF is a disease of significant public health importance, this study aims to identify the mortality profile due to SF in Brazil from 2018 to 2022. Methods: Quantitative and descriptive cross-sectional approach. Data were collected from Brazilian Spotted Fever (BSF) cases registered in the Notifiable Diseases Information System (SINAN-DATASUS) across all regions of Brazil. The data collected includes information on the following variables: year of symptom, evolution, sex, race, environment of infection, region of notification, and age group. Subsequently, the data was entered into Microsoft Excel to create tables and graphs. The chi-square test was then applied to statistically analyze the associations between qualitative variables. A modified Poisson regression model with robust variance was constructed to analyze the age group data and determine which categories had different probabilities of death. The results show the estimates obtained for prevalence ratios, as well as their respective confidence intervals and p-values. The statistical software SAS version 9.4 was used to perform the analysis and a significance level of 5% was considered. Results: From 2018 to 2022, a total of 1126 cases of BSF were reported. Out of these cases, 59.3% (668) were cured, 32.4% (364) resulted in death, 1.1% (13) died from other causes and 7.2% (81) had no recorded outcome. Regarding the region with the highest death rate, the Southeast region led with 99.45% (362) of cases, followed by the Northeast region with 0.45% (2). As for the age group, the majority (63.7%) fell between the ages of 20 and 59 years old. In terms of race/color, 52.7% of the population identified as white. Regarding the contamination environment, 39.3% were in leisure areas. The outcome of death by BSF showed statistically significant associations with sex (p-value = 0.03) and age group (p-value = 0.003). Conclusion: The profile of deaths from Brazilian Spotted Fever primarily affects individuals from the Southeast region of the country, particularly men, and whites aged 20 years or older being contaminated mainly in leisure environments. This study provides a detailed understanding of the pattern of BSP-related deaths, providing crucial information for public health authorities. These insights provide valuable support for formulating informed policies and effective BSP control and prevention strategies.

Comparative Analysis of Metals in Seafood from Rio Doce Coastal Areas and Regional Fish Markets

On November 5, 2015, the Fundão Dam breached (the “Event”), releasing water, tailings, dam construction material, and debris to downstream watercourses. Over 20 million cubic meters of fine particles from the tailings, as well as scoured soil and sediments, reached the Rio Doce estuary and surrounding marine area 17 days later. Fishing was banned by the Federal Court of Espírito Santo in February 2016. The fishing ban area included the coastal area near the mouth of the Rio Doce and seaward to a depth of 25 meters, south to Barra do Riacho, and north to Degredo Beach. In June 2019, the Brazilian health agency, Anvisa, published a risk assessment for fish consumption which recommended daily consumption limits for fish of 200 grams for adults and 50 grams for children for both continental and coastal areas of the Rio Doce basin. Comparative analyses were performed between metal concentrations in marine fish and crustaceans collected in the banned fishing area to reference areas and commercialized seafood markets along the Brazilian coast. The results reveal that metals detected in seafood tissue collected in the fishing ban area are not significantly different than other reference areas or from commercially available seafood. This result indicates that elevated metal concentrations in seafood are a regional problem, unrelated to the Event. Higher concentrations of metals in fish in reference areas outside of the fishing ban area as well as in commercial seafood markets demonstrates that the risk management approach of a localized fishing ban is ineffective for reducing risk to the population related to seafood consumption. .

Static and dynamic tensile failure characteristics of rock based on splitting test of circular ring

Static and dynamic splitting tests were conducted on ring marble specimens with different internal diameters to study the tensile strength and failure modes with the change of the ratio of internal radius to external radius （ρ） under different loading rates. The results show that the dynamic tensile strength of disc rock specimen is approximately five times its static tensile strength. The failure modes of ring specimens are related to the dimension of the internal hole and loading rate. Under static loading tests, when the ratio of internal radius to external radius of the rock ring is small enough （ρ〈0.3）, specimens mostly split along the diametral loading line. With the increase of the ratio, the secondary cracks are formed in the direction perpendicular to the loading line. Under dynamic loading tests, specimens usually break up into four pieces. When the ratio ρreaches 0.5, the secondary cracks are formed near the input bar. The tensile strength calculated by Hobbs’ formula is greater than the Brazilian splitting strength. The peak load and the radius ratio show a negative exponential relationship under static test. Using ring specimen to determine tensile strength of rock material is more like a test indicator rather than the material properties.

Cloning and Sequence Analysis of Ma-14-3-3d Encoding a Homologue 14-3-3 Protein from Banana

[Objective] The aim of the study is to clone and analyze the gene encoding 14-3-3 protein from banana. [Method] Combined with PCR amplification, RACE (rapid amplification of cDNA ends) technique was employed to clone 14-3-3 gene from banana; then the amplified sequence was sequenced and homologically analyzed. [Result] A new cDNA homologous with 14-3-3 protein genes were obtained by RT-PCR and RACE ( rapid amplification of cDNA ends ) approaches. The full length of this cDNA was 866 bp encoding 197 amino acids. Alignment of deduced amino acid sequence with those from other plants revealed that the cDNA shared high homology with 14-3-3 protein genes from other plants, and was designated as Musa acuminata 14-3-3 gene (Ma-14-3-3d). Phylogenetic analysis reveals that Ma-14-3-3d has closer genetic relationship with those from monocotyledon species than those from other species. [Conclusion] Ma-14-3-3d belongs to the same lineage of 14-3-3 from monocotyledon.

香蕉柠檬酸合酶基因MaGCS的克隆及生物信息学分析

采用RACE-PCR的方法首次在香蕉中获得一个柠檬酸合酶基因的cDNA序列。经序列测定和Blastx比对分析表明,该cDNA全长1885bp,编码513个氨基酸残基,具有植物柠檬酸合酶基因的特征结构域,并与其他植物来源的乙醛酸循环体的柠檬酸合酶具有很高的序列相似性,将其命名为MaGCS(Musa glyoxysomal citrate synthase),并对其进行生物信息学分析,初步预测其理化性质及功能等。

香蕉果实的1个14-3-3蛋白同源基因的克隆及序列分析(简报)

根据在香蕉果实抑制缩减文库中获得的1个14-3-3蛋白基因片段,采用PCR和RACE相结合的方法从香蕉(Musaacuminate L. AAA group cv. Brazilian)cDNA文库中筛选到其全长cDNA序列。序列测定和Blastx比对分析结果表明,该cDNA全长1 037 bp,含有1个完整的阅读框,其编码区编码261个氨基酸残基,具有植物14-3-3蛋白基因的保守结构域,并与其他植物来源的14-3-3蛋白具有很高的同源性,将其命名为Ma-14-3-3b(Musa acuminate 14-3-3)。采用遗传进化系统发育树的分析结果表明,Ma-14-3-3b与来源于单子叶植物的多数14-3-3蛋白基因序列在同一个进化枝上。采用RT-PCR对其在香蕉果实发育不同时期的表达进行分析结果表明,在香蕉果实发育的不同时期差异表达,推测其可能在果实的发育中起作用。

Maison du Bresil： A Student Residence for the Brazilian Elite in Paris

This paper presents some thoughts about the Maison du Bresil. The objective is to research this temporary residency for researchers through the meanings that characterize it as a Brazilian territory in Paris and through the very belonging to the category elite as a peculiarity of its residents. The author wish to analyze the international circulation of students and researchers that live there and have an educational experience of multiple dimensions as experiences of deterritorialization of identities and its consequences in a housing space which is at the same time in public and private. Based on documental analysis and ethnographic fieldwork, the paper presents some aspects of the history and the everyday life of the Maison du Bresil and Paris＇ Cite Internationale Universitaire. Also, it intends to show how the meanings of Brazilianness are used as support for the identity crisis lived by the members of a supposed Brazilian elite in Paris, as it analyzes the particularities of the mediations established by the residents of the Maison du Bresil, in the formation and international insertion of some researchers.

Soil Phosphorus Dynamics as Influenced by Land Use Changes in Humid Tropical, Southwest China

Land use changes can greatly influence soil phosphorus (P) dynamics, especially when converting native forests to agricultural land. Soils in Xishuangbanna, which is one of southwest China s tropical areas that maintain fragments of primary forests, were studied to a) evaluate the effect of two common land use changes, conversion of forests to agricultural land or rubber tree plantation, on the dynamics of available P and total P in bulk soils as well as total P in particle size fractions; b) assess the rel…

Brazilian disc test study on tensile strength-weakening effect of high pre-loaded red sandstone under dynamic disturbance

Tensile failure(spalling or slabbing)often occurs on the sidewall of deep tunnel,which is closely related to the coupled stress state of deep rock mass under high pre-static load and dynamic disturbance.To reveal the mechanism of rock tensile failure caused by this coupled stress mode,the Brazilian disc tests were carried on red sandstone under high pre-static load induced by dynamic disturbance.Based on the pure static tensile fracture load of red sandstone specimen,two static load levels(80%and 90%of the pure static tensile fracture load)were selected as the initial high pre-static loading state,and then the dynamic disturbance load was applied until the rock specimen was destroyed.The dynamic disturbance loading mode adopted a sinusoidal wave(sine-wave)load,and the loading wave amplitude was 20%and 10%of the pure static tensile fracture load,respectively.The dynamic disturbance frequencies were set to 1,10,20,30,40,and 50 Hz.The results show that the tensile failure strength and peak displacement of red sandstone specimens under coupled load actions are lower than those under pure static tensile load,and both parameters decrease significantly with the increase of dynamic disturbance frequency.With the increase of dynamic disturbance frequency,the decrease range of tensile strength of red sandstone increased from 3.3%to 9.4%when the pre-static load level is 80%.While when the pre-static load level is 90%,the decrease range will increase from 7.4%to 11.6%.This weakening effect of tensile strength shows that the deep surrounding rock is more likely to fail under the coupled load actions of pre-static load and dynamic disturbance.In this tensile failure mechanism of the deep surrounding rock,the stress environment of deep sidewall rock determines that the failure mode of rock is a tensile failure,the pre-static load level dominates the tensile failure strength of surrounding rock,and dynamic disturbance promotes the strength-weakening effect and affects the weakening range.

Hazardous elements and amorphous nanoparticles in historical estuary coal mining area

In Brazil, intense coal exploitation activities have led to environmental deterioration, including soil mortification, water contamination, loss of ecosystem, and atmospheric contamination. In addition,considerable quantities of sulfur-rich residues are left behind in the mining area; these residues pose grave environmental issues as they undergo sulfide oxidation reactions. When sulfur oxides come in contact with water, extreme acid leachate is produced with great proportions of sulfate, and hazardous elements(HEs), which are identified as coal drainage(CMD). CMD is an environmental pollution challenge, particularly in countries with historic or active coal mines. To prevent CMD formation or its migration, the source must be controlled; however, this may not be feasible at many locations. In such scenarios, the mine water should be collected, treated, and discharged. In this study, data from 2005 to2010 was gathered on the geochemistry of 11 CMD discharges from ten different mines. There are several concerns and questions on the formation of nanominerals in mine acid drainage and on their reactions and interfaces. The detailed mineralogical and geochemical data presented in this paper were derived from previous studies on the coal mine areas in Brazil. Oxyhydroxides, sulfates, and nanoparticles in these areas possibly go through structural transformations depending on their size and formation conditions. The geochemistry of Fe-precipitates(such as jarosite, goethite, and hematite) existent in the CMD-generating coal areas and those that could be considered as a potential source of hazardous elements(HEs)(e.g., Cr) were also studied because these precipitates are relatively stable in extremely low pH conditions. To simplify and improve poorly ordered iron, strontium, and aluminum phase characterization, field emission scanning electron microscopy(FE-SEM), high-resolution transmission electron microscopy(HR-TEM), micro-Raman spectroscopy, and X-ray diffraction(XRD) and sequential extraction(SE) studies were executed on a set CMD samples from the Brazilian mines. This study aimed to investigate the role of both nanomineral and amorphous phase distribution throughout the reactive coal cleaning rejects profile and HEs removal from the water mine to provide holistic insights on the ecological risks posed by HEs, nanominerals, amorphous phases, and to assess sediments in complex environments such as estuaries.