Liver as a new target organ in Alzheimer's disease:insight from cholesterol metabolism and its role in amyloid-beta clearance

Alzheimer's disease,the primary cause of dementia,is characterized by neuropathologies,such as amyloid plaques,synaptic and neuronal degeneration,and neurofibrillary tangles.Although amyloid plaques are the primary characteristic of Alzheimer's disease in the central nervous system and peripheral organs,targeting amyloid-beta clearance in the central nervous system has shown limited clinical efficacy in Alzheimer's disease treatment.Metabolic abnormalities are commonly observed in patients with Alzheimer's disease.The liver is the primary peripheral organ involved in amyloid-beta metabolism,playing a crucial role in the pathophysiology of Alzheimer's disease.Notably,impaired cholesterol metabolism in the liver may exacerbate the development of Alzheimer's disease.In this review,we explore the underlying causes of Alzheimer's disease and elucidate the role of the liver in amyloid-beta clearance and cholesterol metabolism.Furthermore,we propose that restoring normal cholesterol metabolism in the liver could represent a promising therapeutic strategy for addressing Alzheimer's disease.

Disease clearance in ulcerative colitis:A new therapeutic target for the future

Advancements in murine modeling systems for ulcerative colitis have diversified our understanding of the pathophysiological factors involved in disease onset and progression.This has fueled the identification of molecular targets,resulting in a rapidly expanding therapeutic armamentarium.Subsequently,management strategies have evolved from symptomatic resolution to well-defined objective endpoints,including clinical remission,endoscopic remission and mucosal healing.While the incorporation of these assessment modalities has permitted targeted intervention in the context of a natural disease history and the prevention of complications,studies have consistently depicted discrepancies associated with ascertaining disease status through clinical and endoscopic measures.Current recommendations lack consideration of histological healing.The simultaneous achievement of clinical,endoscopic,and histologic remission has not been fully investigated.This has laid the groundwork for a novel therapeutic outcome termed disease clearance(DC).This article summarizes the concept of DC and its current evidence.

Tip Clearance Flows in Turbine Cascades

This article describes the effects of some factors on the tip clearance flow in axial linear turbine cascades. The measurements of the total pressure loss coefficient are made at the cascade outlets by using a five-hole probe at exit Mach numbers of 0.10, 0.14 and 0.19. At each exit Mach number, experiments are performed at the tip clearance heights of 1.0%, 1.5%, 2.0%, 2.5% and 3.0% of the blade height. The effects of the non-uniform tip clearance height of each blade in the pitchwise direction are also studied. The results show that at a given tip clearance height, generally, total pressure loss rises with exit Mach numbers proportionally. At a fixed exit Mach number, the total pressure loss augments nearly proportionally as the tip clearance height increases. The increased tip clearance heights in the tip regions of two adjacent blades are to be blame for the larger clearance loss of the center blade. Compared to the effects of the tip clearance height, the effects of the exit Mach number and the pitchwise variation of the tip clearance height on the cascade total pressure loss are so less significant to be omitted.

An Error Equivalent Model of Revolute Joints with Clearances for Antenna Pointing Mechanisms

Joint clearances in antenna pointing mechanisms lead to uncertainty in function deviation. Current studies mainly focus on radial clearance of revolute joints, while axial clearance has rarely been taken into consideration. In fact, own?ing to errors from machining and assembly, thermal deformation and so forth, practically, axial clearance is inevitable in the joint. In this study, an error equivalent model(EEM) of revolute joints is proposed with considering both radial and axial clearances. Compared to the planar model of revolute joints only considering radial clearance, the journal motion inside the bearing is more abundant and matches the reality better in the EEM. The model is also extended for analyzing the error distribution of a spatial dual?axis("X–Y" type) antenna pointing mechanism of Spot?beam antennas which especially demand a high pointing accuracy. Three case studies are performed which illustrates the internal relation between radial clearance and axial clearance. It is found that when the axial clearance is big enough, the physical journal can freely realize both translational motion and rotational motion. While if the axial clearance is limited, the motion of the physical journal will be restricted. Analysis results indicate that the consideration of both radial and axial clearances in the revolute joint describes the journal motion inside the bearing more precise. To further validate the proposed model, a model of the EEM is designed and fabricated. Some suggestions on the design of revolute joints are also provided.

Minimum Clearance Offsets for Providing Desired Stopping Sight Distances at Simple Curves with Variable Operating Speeds

Lateral clearance on the inside of horizontal curves is required by all geometric design guidelines in order to provide at least stopping sight distance. There already exist graphical models, analytical models, and design charts for determining minimum clearance offsets to meet the requirement. Some of these models determine the offsets based on constant design sight distance values on the assumption that drivers negotiate horizontal curves at constant speed. Therefore, those models are suitable for sites where there is no difference in speeds between tangent and curved sections. Past studies have reported that there are sites where drivers decelerate on entering horizontal curves and accelerate on departing from the curves. At those sites stopping sight distance for a given driver varies with driver location due to variable speed. This paper presents an analytical model and a chart for determining minimum offsets needed to provide desired sight distances at horizontal curves with variable operating speeds. At those sites the offsets yield roadside clearance boundaries that have transition arcs with performances that are similar to those of elliptical arcs. Therefore, practitioners may choose to use elliptical equations or equations and the chart developed herein. Results of this study will be of value to practitioners in the area of roadside design.

The Tip Leakage Flow Structure of an Axial Fan with Tip Clearance

Experiment and numerical simulation technique are used to investigate the tip leakage flow in an axial fan with tip clearance at the design condition. The flow field in the tip region of fan is measured using a PDA (Particle Dynamics Analysis) system. The flow is surveyed across the whole passage at fifteen axial locations (from the 100% axial chord in front of the leading edge to the 100% axial chord behind the trailing edge), mainly focusing on the outer 90% blade span. Both experiment measurement and numerical simulation indicates the leakage flow originated from the tip clearance along the chord rolls up into three dimensional spiral structure to form leakage flow vortex. The interaction of leakage flow and main flow will produce the low velocity zone, and block the flow. The leakage flow almost occupies the most part of flow passage behind the trailing edge.

EFFECT OF TIP CLEARANCE ON PERFORMANCE AND FLOW FIELD OF SMALL SIZED HIGH SPEED CENTRIFUGAL FAN

A centrifugal fan with the high speed and compact dimensions is studied numerically and experimentally. The centrifugal fan consists of a shrouded impeller rotating at 34 000 r/min with a small tip clearance 0.7 mm to the fixed outer casing. Computational models with/without the tip clearance are built and the κ-ω shear stress transport （SST） turbulence model and the unstructured mesh are applied to the numerical simulation for unsteady solutions. The overall performance is measured on a standard experimental bench and the major flow feature of each component inside the centrifugal fan is numerically investigated. In the presence of the tip clearance due to the difference of static pressure between leading and trailing edges of the clearance, i. e. , leading and trailing edges of the impeller, a strong return flow exists inside the clearance passage and re-circulates the main stream inside the impeller passage, and produces the strong flow interaction, thus changing the flow field and influencing the overall performance.

Combined APACH Ⅱ score and arterial blood lactate clearance rate to predict the prognosis of ARDS patients

Objective:To explore the easily applicable indicators of practical value to evaluate the prognosis of acute respiratory distress syndrome（ARDS）.Methods:Blood and biochemical tests and bloodgas analyses were performed upon entry into the ICUs,12 h,24 h,48 h and 72 h after that in 72 ARDS patients（who were admitted to the ICUs of our hospital from January 2000 to December 2009）.Then APACHEⅡscores were achieved by combining relevant physiological parameters and laboratory results.Results:There was a statistical difference between the death group and survival group at different time points upon entering the ICUs in terms of APACHEⅡscore, alveolar-arterial oxygen difference and arterial blood lactate clearance rate.PaO2/FiO2 values were recorded to be statistically different between the death group and survival group 24 h,48 h and 72 h,respectively after entry into the ICUs.In addition,registered linear regression existed between APACHEⅡscore,alveolar-arterial oxygen difference or PaO2/FiO2 value and time. APACHEⅡscore 24 h and 72 h after entering ICUs predicted mortality with an area under the ROC curve（AUC） standing respectively at 0.919 and 0.9SS.Arterial blood lactate clearance rate 12 h, 24 h,48 h and 72 h after entering ICUs predicted mortality with an area under the ROC curve （AUC） at 0.918,0.918,0.909 and 0.991,respectively.Conclusions:APACHEⅡscore applied in combination with arterial blood lactate clearance rate is of clinical significance in assessing the prognosis of ARDS patients.

Effects of Floating Ring Bearing Manufacturing Tolerance Clearances on the Dynamic Characteristics for Turbocharger

The inner and outer oil film dynamic characteristic coefficients of floating ring bearings（FRBs） change due to the manufacturing tolerance of the floating ring, journal and intermediate, which leads to high-speed turbocharger＇s vibration too large and even causes nonlinear vibration accident. However, the investigation of floating ring bearing manufacturing tolerance clearance on the rotordynamic characteristics is less at present. In order to study the influence law of inner and outer clearance on turbocharger vibration, the rotor dynamic motion equations of turbocharger supported in FRBs are derived by analyzing the size relations between floating ring, journal and intermediate for the inner and outer oil film clearances, the time transient response analysis for combination of FRBs clearance are developed. A realistic turbocharger is taken as a research object, the FE model of the turbocharger with FRBs is modeled. Under the conditions of four kinds of limit state bearing clearances for inner and outer oil film, the nonlinear transient analyses are performed based on the established FE dynamic models of the nonlinear rotor-FRBs system applied incentive combinations of gravity and unbalance force, respectively. From the waterfall, the simulation results show that the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different under the four kinds of bearing manufacturing tolerance limit clearances, and fractional frequency does not appear in the turbocharger and the amplitude is minimum under the ODMin/IDMax bearing manufacturing tolerance clearances. The turbocharger vibration is reduced by controlling the manufacturing tolerance clearance combinations of FRBs, which is helpful for the dynamic design and production-manufacturing of high-speed turbocharger.

Add-on pegylated interferon augments hepatitis B surface antigen clearance vs continuous nucleos(t)ide analog monotherapy in Chinese patients with chronic hepatitis B and hepatitis B surface antigen≤1500 IU/mL:An observational study

BACKGROUND Nucleos(t)ide analog(NA)has shown limited effectiveness against hepatitis B surface antigen(HBsAg)clearance in chronic hepatitis B(CHB)patients.AIM To evaluate the efficacy and safety of add-on peginterferonα-2a(peg-IFNα-2a)to an ongoing NA regimen in CHB patients.METHODS In this observational study,195 CHB patients with HBsAg≤1500 IU/m L,hepatitis B e antigen(HBeAg)-negative(including HBeAg-negative patients or HBeAg-positive patients who achieved HBeAg-negative after antiviral treatment with NA)and hepatitis B virus-deoxyribonucleic acid<1.0×10^2 IU/mL after over 1 year of NA therapy were enrolled between November 2015 and December2018 at the Second Affiliated Hospital of Xi'an Jiaotong University,China.Patients were given the choice between receiving either peg-IFNα-2a add-on therapy to an ongoing NA regimen(add-on group,n=91)or continuous NA monotherapy(monotherapy group,n=104)after being informed of the benefits and risks of the peg-IFNα-2a therapy.Total therapy duration of peg-IFNα-2a was 48 wk.All patients were followed-up to week 72(24 wk after discontinuation of peg-IFNα-2a).The primary endpoint was the proportion of patients with HBsAg clearance at week 72.RESULTS Demographic and baseline characteristics were comparable between the two groups.Intention-to-treatment analysis showed that the HBsAg clearance rate in the add-on group and monotherapy group was 37.4%(34/91)and 1.9%(2/104)at week 72,respectively.The HBsAg seroconversion rate in the add-on group was 29.7%(27/91)at week 72,and no patient in the monotherapy group achieved HBsAg seroconversion at week 72.The HBsAg clearance and seroconversion rates in the add-on group were significantly higher than in the monotherapy group at week 72(P<0.001).Younger patients,lower baseline HBsAg concentration,lower HBsAg concentrations at weeks 12 and 24,greater HBsAg decline from baseline to weeks 12 and 24 and the alanine aminotransferase≥2×upper limit of normal during the first 12 wk of therapy were strong predictors of HBsAg clearance in patients with peg-IFNα-2a add-on treatment.Regarding the safety of the treatment,4.4%(4/91)of patients in the add-on group discontinued peg-IFNα-2a due to adverse events.No severe adverse events were noted.CONCLUSION Peg-IFNα-2a as an add-on therapy augments HBsAg clearance in HBeAg-negative CHB patients with HBsAg≤1500 IU/m L after over 1 year of NA therapy.

Indocyanine green clearance test combined with MELD score in predicting the short-term prognosis of patients with acute liver failure

BACKGROUND: Acute liver failure(ALF) is an acute severe deterioration of liver function with high mortality. Early and accurate prognostic assessment of patients with ALF is critically important. Although the model for end-stage liver disease(MELD) scores and King’s College Hospital(KCH) criteria are well-accepted as predictive tools, their accuracy is unsatisfactory.The indocyanine green(ICG) clearance test(ICGR15, ICG retention rate at the 15 minutes) is a sensitive indicator of liver function. In this study, we investigated the efficacy of the ICGR15 for the short-term prognosis in patients with ALF. We compared the predictive value of ICGR15 with the MELD scores and KCH criteria.METHODS: Sixty-nine patients who had been diagnosed with ALF were recruited retrospectively. ICGR15 had been performed by ICG pulse spectrophotometry and relevant clinical and laboratory indices were analyzed within 24 hours of diagnosis.In addition, the MELD scores and KCH criteria were calculated.RESULTS: The three-month mortality of all patients was 47.83%.Age, serum total bilirubin and creatinine concentrations,international normalized ratio for prothrombin time, ICGR15,MELD scores and KCH criteria differed significantly between surviving and deceased patients. A positive correlation was observed between ICGR15 and MELD scores(r=0.328, P=0.006).The ICGR15-MELD model, Logit(P)=0.096×ICGR15+0.174 ×MELD score–9.346, was constructed by logistic regression analysis. The area under the receiver operating characteristic curve was 0.855. When set the cut-off point to-0.4684, the sensitivity was 87.90% and specificity, 72.20%. The area under the receiver operating characteristic curve of the ICGR15-MELD model(0.855) was significantly higher than that of the ICGR15(0.793), MELD scores(0.776) and KCH criteria(0.659).Based on this cut-off value, the patients were divided into two groups. The mortality was 74.36% in the first group(ICGR15-MELD≥-0.4686) and 13.33% in the second group(ICGR15-MELD<-0.4686), with a significant difference between the two groups(χ2=25.307, P=0.000).CONCLUSION: The ICGR15-MELD model is superior to the ICGR15, MELD scores, and KCH criteria in predicting the shortterm prognosis of patients with ALF.

Effects of Semi-floating Ring Bearing Outer Clearance on the Subsynchronous Oscillation of Turbocharger Rotor

Semi-floating ring bearing（SFRB） is developed to control the vibration of turbocharger rotor. The outer clearance of SFRB affects the magnitude and frequency of nonlinear whirl motion, which is significant for the design of turbocharger. In order to explore the effects of outer clearance, a transient finite element analysis program for rotor and oil film bearing is built and validated by a published experimental case. The nonlinear dynamic behaviors ofrotor-SFRB system are simulated. According to the simulation results, two representative subsynchronous oscillations excited by the two hearings respectively are discovered. As the outer clearance of SFRB increases from 24 ~tm to 60 pro, the low-frequency subsynchronous oscillation experiences three steps, including a strong start, a gradual recession and a combination with the other one. At the same time, the high-frequency subsynchronous oscillation starts to appear gradually, then strengthens, and finally combines. If gravity and unbalance are neglected, the combination will start starts from high rotor speed and extents to low rotor speed, just like a ＂zipper＂. It is found from the quantitative analysis that when the outer clearance increases, the vibration amplitude experiences large value firstly, then reduction, and suddenly increasing after combination. A useful design principle of SFRB outer clearance for minimum vibration amplitude is proposed： the outer clearance value should be chosen to keep the frequency of two subsynchronous oscillations clearly separated and their amplitudes close.

Clearance Influence on Dynamic Response of Intermittent Roller Chain Drive

The clearances appear in chain link hinges induced by manufacturing tolerance or wear of components are the most important factor that influences the dynamic performance of the intermittent roller chain drives. Due to the existence of the clearances in chain link hinges, the serious impact vibration phenomenon which influences the stability and the position accuracy of the chain drive system would be caused in the intermittent motion. But, the problem may be that a reasonable modeling on the chain with clearances is difficult due to the large clearance＇s number in chain system and the fact that the clearance＇ size are different. Currently, the studies on the dynamics of the intermittent roller chain considering the multi-clearance＇ joints are rare. Most research works have only focused on the constant moving chains. Taking the intermittent roller chain system as an object, this paper designs and builds the experimental device of this kind of mechanical system. The Longitudinal vibration response of the intermittent chain under the different motion laws was tested. The experimental study shows that the clearances presented in chain link hinges can cause severe impact vibration in the intermittent motion of chain. In subsequent work, the dynamic model of the intermittent roller chain system with the multi-clearance＇ joints was established. By calculating the dynamic response of this kind of mechanical system under the different motion laws, the effect of the clearances on the dynamic response of the intermittent chain drive system was analyzed. The theoretical simulation shows that the serious impact vibration phenomenon of the chain system can be caused by the clearances at the start accelerating period, and the chain drive system is often accompanied by the severe shock and vibration at the moment that the chain moves from the acceleration period to deceleration period. The research conclusions made by the experimental and theoretical studies indicate that the use of motion laws with small and continuous jerk at conversion point can effectively suppress the impact vibration at this point caused by clearances＇ effect. Additionally, the use of nonsymmetrical motion laws with small jerk approaching the end of the indexing period can obtain a smaller residual vibration. The presented motion law can provide an important reference for the improvement of the dynamic performance of the intermittent chain drive systems.

Numerical Analysis of Nozzle Clearance's Effect on Turbine Performance

Variable nozzle turbine （VNT） has become a popular variable geometry turbine （VGT） technology for the diesel engine application. Nozzle clearance, which can＇t be avoided on the hub and shroud side of the VNT turbine due to the pivoting stators, can lead to turbine performance deterioration. However, its mechanism is still not clear. In this paper, numerical investigation, which is validated by experiment, is carried out to study the mechanism of the nozzle clearance＇s effect on the turbine performance. Firstly, performance of the mixed flow turbine with fixed nozzle clearances tested on flow bench. Performance of the tested turbine with the same nozzle clearance is numerically simulated. The numerical result agrees well with the test data, which proves correct of the numerical method. Then the turbine performance with different nozzle clearances is numerically analyzed. The research showed that with nozzle clearance, flow loss in the nozzle increases at first and it reaches the maximum value when the clearance ratio is 5%. Flow at the exit of the nozzle becomes less uniform with nozzle clearance. The negative incidence angle of the rotor also increases with nozzle clearance and leads to more incidence angle loss in the rotor. The low energy fluid formed in the nozzle due to the nozzle clearance migrates from hub to shroud side in the rotor, which is another main reason for the rotor＇s performance degradation. The present research exposed the mechanism of the dramatically decrease of the turbine performance with nozzle clearance： （a） The loss associated with the nozzle leakage increases with the nozzle clearance; （b） The flow loss grows up quickly in the rotor due to the incidence angle loss and migration of the low energy fluid from hub to shroud side.

Induced dural lymphangiogenesis facilities soluble amyloid-beta clearance from brain in a transgenic mouse model of Alzheimer's disease

Impaired amyloid-β clearance from the brain is a core pathological event in Alzheimer＇s disease.The therapeutic effect of current pharmacotherapies is unsatisfactory,and some treatments cause severe side effects.The meningeal lymphatic vessels might be a new route for amyloid-β clearance.This study investigated whether promoting dural lymphangiogenesis facilitated the clearance of amyloid-β from the brain.First,human lymphatic endothelial cells were treated with 100 ng/m L recombinant human vascular endothelial growth factor-C（rh VEGF-C） protein.Light microscopy verified that rh VEGF-C,a specific ligand for vascular endothelial growth factor receptor-3（VEGFR-3）,significantly promoted tube formation of human lymphatic endothelial cells in vitro.In an in vivo study,200 μg/m L rh VEGF-C was injected into the cisterna magna of APP/PS1 transgenic mice,once every 2 days,four times in total.Immunofluorescence staining demonstrated high levels of dural lymphangiogenesis in Alzheimer＇s disease mice.One week after rh VEGF-C administration,enzyme-linked immunosorbent assay results showed that levels of soluble amyloid-β were decreased in cerebrospinal fluid and brain.The Morris water maze test demonstrated that spatial cognition was restored.These results indicate that the upregulation of dural lymphangiogenesis facilities amyloid-β clearance from the brain of APP/PS1 mice,suggesting the potential of the VEGF-C/VEGFR-3 signaling pathway as a therapeutic target for Alzheimer＇s disease.

Hepatic clearance measured with ^(99m)Tc-GSA single-photon emission computed tomography to estimate liver fibrosis

AIM: To evaluate the clinical utility of hepatic clearance(HC) measured with technetium-99m-diethylenetriaminepenta-acetic acid-galactosyl human serum albumin(99mTc-GSA) single-photon emission computed tomography(SPECT) to estimate the degree of liver fibrosis.METHODS:Seventy-eight consecutive patients who underwent initial hepatectomy due to hepatocellular carcinoma were enrolled in this study.Indocyanine green clearance(ICG R15),quantitative indices estimated by 99mTc-GSA[the receptor index(LHL15 and HH15)and HC via SPECT analysis],and conventional liver function tests were performed before hepatectomy.Correlations among the quantitative indices for liver functional reserve,conventional liver function tests,andthe degree of liver fibrosis were evaluated.RESULTS:The degree of liver fibrosis was correlated with ICG R15,HH15,LHL15,and HC.HC showed the best correlation with conventional liver function tests.According to multivariate analysis,HC and LHL15 were significant independent predictors of severe fibrosis.HC was the most valuable index for predicting severe fibrosis.CONCLUSION:HC measured with 99mTc-GSA SPECT is a reliable index for assessing liver fibrosis before hepatectomy.

Human leukocyte antigen class II DQB1*0301, DRB1*1101 alleles and spontaneous clearance of hepatitis C virus infection: A meta-analysis

AIM： To assess the associations of human leukocyte antigen （HI_A） class Ⅱ DQB1＊0301 and/or DRB1＊1101 allele with spontaneous hepatitis C virus （HCV） clearance by meta-analysis of individual dataset from all studies published till date. METHODS： To clarify the impact of HLA class Ⅱ polymorphisms on viral clearance, we performed a metaanalysis of the published data from 11 studies comparing the frequencies of DQB1＊0301 and DRB1＊1101 alleles in individuals with spontaneous resolution to those with persistent infection. As we identified the heterogeneity between studies, summary statistical data were calculated based on a random-effect model. RESULTS： Meta-analyses yielded summary estimatesodds ratio （OR） of 2.36 [95%CI （1.62, 3.43）, P〈0.00001] and 2.02 [95%CI （1.56, 2.62）, P〈0.00001] for the effects of DQB1＊0301 and DRB1＊1101 alleles on spontaneous clearance of HCV, respectively. CONCLUSION： These results support the hypothesis that specific HLA class Ⅱ alleles might influence the susceptibility or resistance to persistent HCV infection. Both DQB1＊0301 and DRB1＊1101 are protective alleles and present HCV epitopes more effectively to CD4^＋T lymphocytes than others, and subjects with these two alleles are at a lower risk of developing chronic HCV infection. Large, multi-ethnic confirmatory and welldesigned studies are needed to determine the host genetic determinants of HCV infection.

Enzyme-digested Colla Corii Asini(E’jiao) prevents hydrogen peroxide-induced cell death and accelerates amyloid beta clearance in neuronal-like PC12 cells

As an aging-associated degenerative disease,Alzheimer’s disease is characterized by the deposition of amyloid beta(Aβ),oxidative stress,inflammation,dysfunction and loss of cholinergic neurons.Colla Corii Asini(CCA)is a traditional Chinese medicine which has been used for feebleness-related diseases and anti-aging.CCA might delay aging-induced degenerative changes in neurons.In the present study,we evaluated antioxidant activity,cytoprotective effects,and Aβremovability of enzyme-digested Colla Corii Asini(CCAD).Oxygen radical absorbance capacity(ORAC)activity assay showed that,as compared to gelatins from the skin of porcine,bovine and cold water fish,CCA exhibited the highest ORAC activity.The ORAC activity of CCA and CCAD was increased gradually by the length of time in storage.Ultrastructure analysis by scanning electron microscopy showed that among CCA manufactured in 2008,2013,2017 and gelatin from cold water fish skin,CCA manufactured in 2008 presented the smoothest surface structure.We further tested the protective effects of CCAD(manufactured in 2008)and enzyme-digested gelatin from cold water fish skin(FGD)on hydrogen peroxide(H2O2)-induced cell death in nerve growth factor-differentiated neuronal-like PC12 cells.Presto blue assay showed that both FGD and CCAD at 0.5 mg/m L increased cell viability in H2O2-treated neuronal-like PC12 cells.The protection of CCAD was significantly superior to that of FGD.Acetylcholinesterase(Ach E)assay showed that both FGD and CCAD inhibited Ach E activity in nerve growth factor-differentiated neuronal-like PC12 cells to 89.1%and 74.5%of that in non-treated cells,respectively.The data suggest that CCAD might be able to increase the neurotransmitter acetylcholine.Although CCAD inhibited Ach E activity in neuronal-like PC12 cells,CCAD prevented H2O2-induced abnormal deterioration of Ach E.ELISA and neprilysin activity assay results indicated that CCAD reduced amyloid beta accumulation and increased neprilysin activity in Aβ1–42-treated neuronal-like PC12 cells,suggesting that CCAD can enhance Aβclearance.Our results suggest that CCA might be useful for preventing and treating Alzheimer’s disease.

Indocyanine green clearance in evaluating the recovery of liver reserve function after superselective transarterial chemoembolization

Transarterial chemoembolization(TACE)may ravage normal liver tissues apart from the neoplastic nodules which offset the anti-tumor effect.This study aimed to evaluate the recovery of liver reserve function(LRF)after TACE by indocyanine green(ICG)clearance test and other routine liver function tests.Forty-six newly diagnosed HCC patients who had undergone TACE as the initial treatment from January 2011 to January 2012 were enrolled in this study.The effects of age,basic ICG clearance rate and interval time between two assessments on the recovery of LRF were analyzed.We found that ICG retention rate at the 15 minutes(ICGR15)was significantly increased after TACE(12.3±8.1%vs 16.8±12.1%,P【0.01)in all the 46 patients.In particular,the ICGR15 value was increased in older patients(age】55 years,20.3±12.5%vs 13.7±7.2%,P【0.01).The interval of ICG test also affected the ICGR15 value(≤47days,17.8±11.4%after vs 12.1±7.1%before TACE,P【0.01).Our data suggested that TACE decreased LRF,especially in older patients.ICG test was more sensitive to evaluate the recovery of LRF after TACE than the Child-Pugh grade and routine liver function tests.

Dynamic modelling and properties analysis of 3RSR parallel mechanism considering spherical joint clearance and wear

The collision and wear caused by inevitable clearance in kinematic pair have an effect on the dynamic characteristics of the mechanism.Therefore,we established the dynamic model of a 3RSR(R is the revolute joint and S is the spherical joint)parallel mechanism with spherical joint clearance based on the modified Flores contact force model and the modified Coulomb friction model using Newton-Euler method.The standard quaternion was introduced in the constraint equation,and the four-order Runge-Kutta method was adopted to solve the 3RSR dynamic model.The simulation results were compared and analyzed with the numerical results.The geometrical parameters of the worn ball socket were solved based on the Archard wear model,and the geometrical reconstruction of the worn surface was carried out.The geometric reconstruction parameters were substituted into the dynamic model,which was to analyze the dynamic response of the 3RSR parallel mechanism with wear and spherical joint clearance.The simulation results show that the irregular wear occurs in the spherical joint with clearance under the presence of the impact and friction force.The long-term wear will increase the fluctuation of the contact force,thereby decreasing the movement stability of the mechanism.