Assisted Compatibility, and Balanced Regulation of the Mechanical, Thermal, and Antioxidant Activity of Polyvinyl Alcohol-Chinese Bayberry Tannin Extract Films Using Different Di-Aldehydes as Cross-Linkers

Polyvinyl alcohol(PVA)-based films containing Chinese bayberry tannin(BT)were prepared by cross-linking using glyoxal,glutaraldehyde and dialdehyde starch,individually.The presence of cross-linkers was evident to promote the transparency and decrease the moisture content of PVA/BT films,while the water solubility stayed almost unchanged in the cross-linked PVA/BTfilms.All cross-linkers provided promotion of the water vapor per-meability,mechanical property and thermal stability of PVA/BT films.The best water vapor barrier capacity was found in case of glutaraldehyde cross-linked PVA/BT film,while the highest tensile strength was encountered in case of glyoxal cross-linked PVA/BT films,compared with the uncross-linked films.The scavenging action of the films towards DPPH radical activity was influenced by the nature of each cross-linker.Namely,the PVA/AT film cross-linked by glutaraldehyde acquired the lowest radical scavenging activity in a certain time,suggesting that glutaraldehyde decreased the release rate of BT from PVA.Based on the experimental data,glutaraldehyde and dialdehyde starch could be more suitable for PVA/BT film preparation since they can promote the intermo-lecular interaction of PVA and BT to a reasonable extent.

Mechanical Properties of Silicone Rubber Using Carbosilane Dendrimers as the Cross-linker

Peroxide-cured high-temperature vulcanized （HTV） silicone rubber was prepared by using allyl-capped carbosilane dendrimers, in which the core molecule is Si（CHaCH=CH2）4, as the cross-linker. It showed that this kind of allyl-capped carbosilane dendrimer improved the mechanical properties of silicone rubber.

Cross-linking Copolymerization of Acrylic Acid and Multi-armed Cross-linkers

The overall cross-linking copolymerization of acrylic acid and multi-armed cross-linkers are investigated by in situ interferometry. The results show that the more arms the cross-linkers have, the higher the polymerization rate is. However, they also mean the existence of less cross-linking efficiency and some defects in gel network.

Synthesis and Properties of Polyurethane Elastomers Containing Sucrose as a Cross-Linker

Polyaddition using isocyanate and polyol forms polyurethane elastomer (PUE). However, this method has rarely been applied to the construction of PUEs containing sucrose. Hence, the introduction of sucrose (disaccharide) as a cross-linker via polyaddition remains a challenging subject in polymer chemistry. Here, we report the synthesis of PUEs using an aromatic isocyanate (4,4’-diphenylmethane diisocyanate), polyols including a polyether polyol (polytetramethylene glycol) and two polyester polyols (polycaprolactone and polycarbonate diols), and sucrose as a crosslinker by a one-shot method. The PUEs containing sucrose were successfully produced. The use of sucrose was essential to obtain the desired PUEs containing sucrose units in the main chain.

Small molecule interfacial cross-linker for highly efficient two-dimensional perovskite solar cells

The nonradiative recombination of charge carriers at the hole transport layer(HTL)/perovskite interface generally induces remarkable performance loss of the inverted two-dimensional perovskite solar cells(2D PSCs). Herein, a cross-linkable small molecule of 2-mercaptoimidazole(2-MI) was introduced into the nickel oxide(NiO_(x))/2D perovskite interface. Experiments have confirmed the formation of Ni-N covalent bond by N atom in the 2-MI and Ni in the NiO_(x) and the coordinating between S atom of 2-MI and under-coordinated Pb^(2+) near to the NiO_(x)/perovskite interface, which contributes to creating a crosslinking between NiO_(x)/perovskite interface to restrain charge carrier recombination and enhance the extraction of hole carriers at the interface. Besides, the 2-MI modification layer is also beneficial for promoting the crystallinity of 2D perovskite. Consequently, the inverted 2D PSCs with 2-MI modification achieved the best power conversion efficiency of 15%. This paves a route to acquire highly efficient 2D PSCs by constructing a cross-linking at the NiO_(x)HTL/2D perovskite interface.

Small Things Make a Big Difference: the Small-molecule Cross-linker of Robust Water-soluble Network Binders for Stable Si Anodes

Silicon(Si)with high theoretical capacity has attracted tremendous attention as the next-generation anode material for Li-ion batteries,but the huge expansion during cycling restricts its practical application.Designing a low-cost,accessible robust network binder is a facile and effective approach to suppress the volume change effect and achieve the commercial application of Si anodes.Different previous studies focused on the network binder macromolecule main chain,this manuscript pays attention to the study of small-molecule cross-linker.Herein,cross-linked network binders using alginate acid and two kinds of cross-linkers,i.e.,D-sorbitol and isosorbide(Alg-DS and Alg-IS binders)are synthesized.It was found that not only the chemical structure of the cross-linker but also the physicochemical property,such as melting point affect greatly the mechanical properties of the network binder.As a result,the Si anode with an Alg-DS binder dried below the melting point of DS shows the best cycling stability with a high capacity of 2249.8 mA·h/g and a retention rate as high as 95.9%after 100 cycles.This study gives a new view to design robust network binders for stable Si anodes.

Residual alkali-evoked cross-linked polymer layer for anti-air-sensitivity LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)cathode

High-energy density lithium-ion batteries(LIBs)with layered high-nickel oxide cathodes(LiNi_(x)Co_(y)Mn_(1-x-y)O_(2),x≥0.8)show great promise in consumer electronics and vehicular applications.However,LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)faces challenges related to capacity decay caused by residual alkalis owing to high sensitivity to air.To address this issue,we propose a hazardous substances upcycling method that fundamentally mitigates alkali content and concurrently induces the emergence of an anti-air-sensitive layer on the cathode surface.Through the neutralization of polyacrylic acid(PAA)with residual alkalis and then coupling it with 3-aminopropyl triethoxysilane(KH550),a stable and ion-conductive cross-linked polymer layer is in situ integrated into the LiNi_(0.89)Co_(0.06)Mn_(0.05)O_(2)(NCM)cathode.Our characterization and measurements demonstrate its effectiveness.The NCM material exhibits impressive cycling performance,retaining 88.4%of its capacity after 200 cycles at 5 C and achieving an extraordinary specific capacity of 170.0 mA h g^(-1) at 10 C.Importantly,this layer on the NCM efficiently suppresses unfavorable phase transitions,severe electrolyte degradation,and CO_(2)gas evolution,while maintaining commendable resistance to air exposure.This surface modification strategy shows widespread potential for creating air-stable LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)cathodes,thereby advancing high-performance LIBs.

Assembly of gold nanoparticles with H_(10)TTPR (3a, 4, 5, 8, 9, 9a, 10, 11-octa-hydro-2H,3H-1,6,7,12-tetrathia-perylene) as the rigid cross-linker

Gold nanoparticles were assembled with the rigid cross-linker, H10TTPR. The assembly process was stud-ied with the UV-vis spectroscopy and TEM. By adjusting the amount of H10TTPR added to the gold nanoparticle solution, the aggregate form of gold nanoparticles could be controlled.

Mechanism of high Li-ion conductivity in poly(vinylene carbonate)-poly(ethylene oxide)cross-linked network based electrolyte revealed by solid-state NMR

Solid polymer electrolytes(SPEs)have become increasingly important in advanced lithium-ion batteries(LIBs)due to their improved safety and mechanical properties compared to organic liquid electrolytes.Cross-linked polymers have the potential to further improve the mechanical property without trading off Li-ion conductivity.In this study,focusing on a recently developed cross-linked SPE,i.e.,the one based on poly(vinylene carbonate)-poly(ethylene oxide)cross-linked network(PVCN),we used solid-state nuclear magnetic resonance(NMR)techniques to investigate the fundamental interaction between the chain segments and Li ions,as well as the lithium-ion motion.By utilizing homonuclear/heteronuclear correlation,CP(cross-polarization)kinetics,and spin-lattice relaxation experiments,etc.,we revealed the structural characteristics and their relations to lithium-ion mobilities.It is found that the network formation prevents poly(ethylene oxide)chains from crystallization,which could create sufficient space for segmental tumbling and Li-ion co nductio n.As such,the mechanical property is greatly improved with even higher Li-ion mobilities compared to the poly(vinylene carbonate)or poly(ethylene oxide)based SPE analogues.

Tuning the cross-linked structure of basic poly(ionic liquid)to develop an efficient catalyst for the conversion of vinyl carbonate to dimethyl carbonate

Dimethyl carbonate(DMC)is a crucial chemical raw material widely used in organic synthesis,lithiumion battery electrolytes,and various other fields.The current primary industrial process employs a conventional sodium methoxide basic catalyst to produce DMC through the transesterification reaction between vinyl carbonate and methanol.However,the utilization of this catalyst presents several challenges during the process,including equipment corrosion,the generation of solid waste,susceptibility to deactivation,and complexities in separation and recovery.To address these limitations,a series of alkaline poly(ionic liquid)s,i.e.[DVBPIL][PHO],[DVCPIL][PHO],and[TBVPIL][PHO],with different crosslinking degrees and structures,were synthesized through the construction of cross-linked polymeric monomers and functionalization.These poly(ionic liquid)s exhibit cross-linked structures and controllable cationic and anionic characteristics.Research was conducted to investigate the effect of the cross-linking degree and structure on the catalytic performance of transesterification in synthesizing DMC.It was discovered that the appropriate cross-linking degree and structure of the[DVCPIL][PHO]catalyst resulted in a DMC yield of up to 80.6%.Furthermore,this catalyst material exhibited good stability,maintaining its catalytic activity after repeated use five times without significant changes.The results of this study demonstrate the potential for using alkaline poly(ionic liquid)s as a highly efficient and sustainable alternative to traditional catalysts for the transesterification synthesis of DMC.

Early changes in corneal densitometry after FS-LASIK combined with accelerated corneal cross-linking for correction of high myopia

AIM:To observe the effects of femtosecond laserassisted excimer laser in situ keratomileusis combined with accelerated corneal cross-linking(FS-LASIK Xtra)on corneal densitometry after correcting for high myopia.METHODS:In this prospectively study,130 patients underwent FS-LASIK or FS-LASIK Xtra for high myopia.Their right eyes were selected for inclusion in the study,of which 65 cases of 65 eyes in the FS-LASIK group,65 patients with 65 eyes in the FS-LASIK Xtra group.Patients were evaluated for corneal densitometry at 1,3,and 6mo postoperatively using Pentacam Scheimpflug imaging.RESULTS:Preoperative differences in corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups in different ranges were not statistically significant(P>0.05).Layer-by-layer analysis revealed statistically significant differences in the anterior(120μm),central,and total layer corneal densitometry between the FS-LASIK and FS-LASIK Xtra groups at 1 and 3mo postoperatively(all P<0.05),the FS-LASIK Xtra group is higher than that of the FS-LASIK group.Analysis of different diameter ranges showed statistically significant differences between the FS-LASIK group and the FS-LASIK Xtra group at 1mo postoperatively in the ranges of 0–2,2–6,and 6–10 mm(both P<0.05);At 3mo postoperatively,the FS-LASIK Xtra group is higher than that of the FS-LASIK group in the ranges of 0–2 and 2–6 mm(P<0.05).At 6mo postoperatively,there were no statistically significant differences in corneal densitometry between the FS-LASIK group and the FS-LASIK Xtra group in different diameter ranges(all P>0.05).CONCLUSION:There is an increase in internal corneal densitometry during the early postoperative period after FS-LASIK Xtra for correction of high myopia.However,the densitometry values decreased to the level of conventional FS-LASIK at 6mo after surgery,with the most significant changes observed in the superficial central zone.

Solid-state NMR of vulcanized natural rubber/butadiene rubber blends:Local organization and cross-linking heterogeneities This article is part of the virtual special issue“Solid-state NMR studies on polymers and biological solids”

Elastomer blends,among which natural rubber(NR)and butadiene rubber(BR),are involved in many components of the automotive/tire industry.A comprehensive understanding of their mechanical behavior requires,among other features,a detailed description of the crosslink density in these mixtures.In the case of vulcanized immiscible blends,the distribution of the cross-link density within each of the NR-and BR-rich domains is key information,but difficult to determine using the conventional approaches used for one-component crosslinked elastomers.In this study,the vulcanization within NR/BR blends is investigated using a robust^(1)H double-quantum(DQ)MAS recoupling experiment,BaBa-xy16.Two kinds of cross-linked NR/BR blends were considered with two different microstructures for the BR component.The bulk organization of the resulting blends was first probed by analyzing the^(1)H spin-lattice relaxation behavior.In a second step,BaBa-xy16 was used to investigate,in a selective way,the cross-link heterogeneities within NR/BR blends.In particular,for immiscible NR/BR mixtures,the distribution of the cross-link density between both phases was compared and the observed differences were discussed.

Molecular Dynamics Study on Hydrothermal Response of PNIPAM:From Single Chain to Cross-Linked Polymer

Thermosensitive hydrogel can integrate vapor molecular capture,in-situ liquefaction,and thermal-induced water release for freshwater capture.This study aimed to examine the dynamic behavior of poly(N-isopropylacrylamide)(PNIPAM)single chain and cross-linking thermosensitive hydrogel through molecular dynamics simulation.Specifically,the impact of lower critical solution temperature(LCST)on the conformation of polymer chain and the interaction between water and polymer chain were also investigated.The polymer chain conformation underwent a transition from coil to globule when the temperature exceeded the LCST,indicating the temperature responsiveness of PNIPAM.Additionally,thermosensitive hydrogel samples with different cross-linking degrees(DOC)were studied,and relevant parameters such as the number of free water,the diffusion coefficient of water,and the pore size distribution were counted to evaluate the temperature responsiveness and water release characteristics of thermosensitive hydrogel.

Molecule‑Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

The risk of flammability is an unavoidable issue for gel polymer electrolytes(GPEs).Usually,flameretardant solvents are necessary to be used,but most of them would react with anode/cathode easily and cause serious interfacial instability,which is a big challenge for design and application of nonflammable GPEs.Here,a nonflammable GPE(SGPE)is developed by in situ polymerizing trifluoroethyl methacrylate(TFMA)monomers with flame-retardant triethyl phosphate(TEP)solvents and LiTFSI–LiDFOB dual lithium salts.TEP is strongly anchored to PTFMA matrix via polarity interaction between-P=O and-CH_(2)CF_(3).It reduces free TEP molecules,which obviously mitigates interfacial reactions,and enhances flame-retardant performance of TEP surprisingly.Anchored TEP molecules are also inhibited in solvation of Li^(+),leading to anion-dominated solvation sheath,which creates inorganic-rich solid electrolyte interface/cathode electrolyte interface layers.Such coordination structure changes Li^(+)transport from sluggish vehicular to fast structural transport,raising ionic conductivity to 1.03 mS cm^(-1) and transfer number to 0.41 at 30℃.The Li|SGPE|Li cell presents highly reversible Li stripping/plating performance for over 1000 h at 0.1 mA cm^(−2),and 4.2 V LiCoO_(2)|SGPE|Li battery delivers high average specific capacity>120 mAh g^(−1) over 200 cycles.This study paves a new way to make nonflammable GPE that is compatible with Li metal anode.

Adsorptive Removal of Copper Ions from Aqueous Solution Using Cross-linked Magnetic Chitosan Beads

The performance of cross-linked magnetic chitosan, coated with magnetic fluids and cross-linked with ePichlorohydrin, was investigated for the adsorption of Copper （Ⅱ） from aqueous solutions. Infrared spectra of chitosan before and after modification showed that the coating and cross-linking are effective. Experiments were performed at different pH of solution and contact time, and appropriate conditions for the adsorption of Cu（Ⅱ） were determined. Experimental equilibrium data were correlated with Langmuir and Freundlich isotherms for determination of the adsorption potential. The results showed that the Langmuir isotherm was better compared with the Freundlich isotherm, and the uptake of Cu（Ⅱ） was 78.13 mg·g^- 1. The kinetics of adsorption corresponded with the first-order Langergren rate equation, and Langergren rate constants were determined.

Study of action mechanisms and properties of Cr^(3+) cross-linked polymer solution with high salinity

Performance characteristics of partially hydrolyzed polyacrylamide （HPAM） and cross- linked polymer （CLP, Cr^3＋ as the cross linker） solutions have been investigated. A Brookfield viscometer, rheometer, dynamic light scattering system, and core flow device have been used to measure the viscosity, viscoelasticity, polymer coil dimensions, molecular configuration, flow characteristics, and profile modification. The results show that, under conditions of high salinity and low HPAM and Cr^3＋ concentrations, cross-linking mainly occurred between different chains of the same HPAM molecule in the presence of Cr^3＋, and a cross-linked polymer （CLP） system with a local network structure was formed. Compared with an HPAM solution of the same concentration, the apparent viscosity of the CLP solution increased slightly or remained almost unchanged, but its viscoelasticity （namely storage modulus, loss modulus, and first normal stress difference） increased, and the resistance coefficient and residual resistance coefficient increased significantly. This indicates that the CLP solution exhibits a strong capability to divert the sequentially injected polymer flood from high-permeability zones to low- permeability zones in a reservoir. Under the same HPAM concentration conditions, the dimensions of polymer coils in the CLP solution increased slightly compared with the dimensions of polymer coils in HPAM solution, which were smaller than the rock pores, indicating that the cross-linked polymer solution was well adapted to reservoir rocks. Core flood experiments show that at the same cost of reagent, the oil recovery by CLP injection （HPAM-1, Cr^3＋ as the cross linker） is 3.1% to 5.2% higher than that by HPAM- 2 injection.

PERVAPORATION PROPERTIES OF PDMS MEMBRANES CURED WITH DIFFERENT CROSS-LINKING REAGENTS FOR ETHANOL CONCENTRATION FROM AQUEOUS SOLUTIONS

Ethanol perm-selective PDMS/PVDF composite membranes were prepared by curing polydimethylsiloxane (PDMS) with various cross-linking reagents,such as tetraethoxylsilane(TEOS),γ-aminopropyltriethoxylsilane(APTEOS), phenyltrimethoxylsilane(PTMOS) and octyltrimethoxylsilane(OTMOS) as well.The cross-linking density and surface properties of the PDMS active layer were adjusted by varying cross-linking reagents.The pervaporation performance of PDMS membranes cured with different cross-linking reagents was investig...

Applications of Crown Ether Cross-Linked Chitosan for the Analysis of Lead and Cadmium in Environmental Water Samples

A new type of crown ether cross-linked chitosan was synthesized by the reaction of chitosan with 4,4′-dibromodibenzo-18-crown-6 (Br-DBC). Its token structure was analyzed with FT-IR and NMR and the adsorption behaviors for lead and cadmium in environmental water samples by FAAS were studied. In addition the best analysis conditions were discussed and the adsorption mechanism was explained. As the enrichment factor is above 100, both recoveries are 94%–106%, the detection limits of lead and cadmium are 0.5μg·L?1 and 0.04 μg·L?1 and the relatively standard deviations of lead and cadmium are 3.1% and 2.8% respectively, this new method was successfully applied to the determination of environmental water samples. This method is fast and simple and it greatly enhances the determination ability of FAAS for lead and cadmium.

Experimental study on the treatment of rabbit corneal melting after alkali burn with Collagen cross-linking

AIM: To evaluate the effect of Collagen cross-linking on the prevention of melting in rabbit corneas after alkali burn. METHODS: Twenty New Zealand white rabbits were randomly divided into model control group and collagen cross-linking treatment group. The second group of rabbits received collagen cross linked treatment. Both groups were applied with antibiotic eye drops to prevent infection. The corneas were evaluated for melting, opacity, pathological and immunohistochemistry, record the changes when 28 days after the animals were killed. RESULTS: In the control group, 6 out of 8 rabbits showed corneal melting after injury (14 +/- 4) days, while two corneal perforated. In collagen cross-linking treatment group, one rabbit showed corneal melting after injury 23 days, without corneal perforation; corneal dissolution rate between the two groups was significantly different (P <0.05). Pathological examination suggested that in the treatment group, mild corneal edema, mild damage to collagen fibers, inflammatory cell infiltration was significantly less than the control group. Immunohistochemistry showed that corneal collagen fibers arranged in neat rows in the control group. CONCLUSION: Collagen cross-linking treatment not only can prevent and delay the corneal melting after alkali burn, but also can reduce the destruction of corneal collagen fibers and infiltration of inflammatory cells in the corneal tissue.

Study on the Soy Protein-Based Adhesive Cross-Linked by Glyoxal

Based on the ESI-MS and ^(13)C-NMR analysis of the forms of glyoxal in acidic and alkaline solutions,the soy-based adhesive cross-linked by glyoxal was prepared in this work.The results showed that glyoxal existed in water in different forms at different pH levels.Under alkaline conditions,glyoxal transformed to glycolate through the intramolecular disproportionation reaction.Under acidic conditions,although some of glyoxal transformed to glycolate as what happened under alkaline conditions,most of glyoxal molecules existed in the form of fiveor six-membered cyclic ether structure.No ethylene tetraol or free aldehyde group was actually detected under these conditions.Although glyoxal reacted with soy protein under both acidic and alkaline conditions,alkaline conditions were more favorable for the improvement of mechanical performance and water resistance of soybased adhesives than acid conditions.