期刊文献+
共找到806篇文章
< 1 2 41 >
每页显示 20 50 100
Segregation of AFLP Markers in A ( Populus tomentosa× P. bolleana) ×P. tomentosa Carr. BC_1 Family
1
作者 张德强 张志毅 +1 位作者 杨凯 田林 《Forestry Studies in China》 CAS 2002年第2期21-26,共6页
To investigate the levels of polymorphisms and Mendelian segregation ratio in clone “TB01” (P. tomentosa×P. bolleana) ×clone “LM50” (P. tomentosa) BC 1 population at the entire genome level, ampl... To investigate the levels of polymorphisms and Mendelian segregation ratio in clone “TB01” (P. tomentosa×P. bolleana) ×clone “LM50” (P. tomentosa) BC 1 population at the entire genome level, amplified fragment length polymorphisms (AFLPs) analysis was conducted for both parents and 120 progenies. Forty one pairs of selective primers were used to detect 2?707 bands, of which 712 (26.4%) were polymorphic. Chi\|square tests were performed to examine if the observed genotypic frequencies of AFLP loci deviated from expected 1∶1 Mendelian segregation ratio ( P <0.01) in BC 1 population. Among the 712 loci 571 (80.2%) fit to Mendelian 1∶1 segregation ratio, corresponding to DNA polymorphisms heterozygous in one parent and a null in the other. The result shows that the AFLP markers are very suitable for fingerprinting and genetic mapping in the Chinese white poplar (Populus tomentosa Carr.). 展开更多
关键词 AFLP polymorphic loci segregation ratio Chinese white poplar ( Populus tomentosa carr.)
下载PDF
Anatomic Study of Female Sterility of Pinus tabulaeformis Carr. 被引量:5
2
作者 Cheng Pengjun Li Fenglan Zheng CaixiaCollege of Biological Sciences and Biotechnology, Beijing Forestry University, Beijing 100083, P. R. China 《Forestry Studies in China》 CAS 2003年第1期13-19,共7页
The anatomic research on the mutant clone of Pinus tabulaeformis Carr. in the seed orchard in Xingcheng, Liaoning Province was carried out. The female cone of the mutant clone looked like normal, but its ovules degene... The anatomic research on the mutant clone of Pinus tabulaeformis Carr. in the seed orchard in Xingcheng, Liaoning Province was carried out. The female cone of the mutant clone looked like normal, but its ovules degenerated in the early stage. This paper tries to find out the reason and time of ovule abortion. It seems that the ovule abortion is probably caused by female sterility because the microspores of this mutant clone were normal. Through the serial observations on the one-year-old macrosporangiates and the ovules of two-year-old female cones of mutant and normal clone, it is found that the reason of ovule abortion in mutant clone is the failure of the mitosis of free nuclei in the female gametophyte, and the time is about in the early April. 展开更多
关键词 Pinus tabulaeformis carr. female sterility macrosporangiate free nuclei
下载PDF
Content Changes of Several Endogenous Plant Hormones in Female-Sterile Pinus tabulaeformis Carr. 被引量:3
3
作者 Bao Ren-yan Zheng Cai-xia 《Forestry Studies in China》 CAS 2005年第4期16-19,共4页
To determine the relationship between female sterility of Pinus tabulaeformis Carr. and plant hormones, content changes of several endogenous plant hormones in a female-sterile clone and a normal clone were analyzed d... To determine the relationship between female sterility of Pinus tabulaeformis Carr. and plant hormones, content changes of several endogenous plant hormones in a female-sterile clone and a normal clone were analyzed during the key period of female gametophyte abortion in mutant clones. The change of ABA content showed a similar pattern between normal and mutant clones, but the ABA content of the mutant clone was always much higher than that of the normal clone. In the normal clone, the IAA content decreased significantly at the early stage of the period and reached its minimum during the first ten days of April and stabilized thereafter. The endogenous ZR levels increased sharply at the early stages and reached a maximum in the middle of April, then decreased dramatically. The IAA and ZR contents of the mutant clone did not change perceptively through the entire period. We conclude that the high levels of ABA and the deficit of IAA and ZR may be the reasons of female gametophyte abortion in the female-sterile clones of P. tabulaeformis. 展开更多
关键词 endogenous hormones female sterility Pinus tabulaeformis carr.
下载PDF
Lignin Characterization of Triploid Clones of Populus tomentosa Carr. 被引量:1
4
作者 Jin Xiao-juan Pu Jun-wen +2 位作者 Xie Yi-min Takeshi Furuno Liu Xin-yu 《Forestry Studies in China》 CAS 2005年第2期52-56,共5页
In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin (MWL), lignin carbohydrate complex... In order to understand the structural characteristics of lignin in triploid clones ofPopulus tomentosa and its changes in the processes of pulping and bleaching, milled wood lignin (MWL), lignin carbohydrate complex (LCC) and the residual lignin from kraft pulp (KP) and sulfite pulp (SP) were isolated and analyzed by Fourier transform infrared (FTIR) spectrum and ^13C nuclear magnetic resonance (NMR). The most diagnostic peaks were assigned and the differences were discussed. The spectral patterns reveal that triploid P tomentosa shows the specific features of hardwood from temperate areas, but in the spectrum of FTIR, the strength ratio orAl270 cm^-1 to A1226 cm^-1 is 0.88, higher than the average of hardwood from temperate areas, which will make the lignin delignification more difficult during pulping and bleaching. The LCC from triploid P tomentosa is mainly composed of xyloglucan and glucuronic acid, and other glucides have much lower ratio. In LCC FTIR, there are three peaks at 1 427, 1 329 and 1 046 cm^-1, indicating that both semi-cellulose and cellulose could exist in LCC, and that there might be relationships between cellulose and lignin. Compared with the residual lignin from KP and SP, the condensed structure in KP is more than that in SP. 展开更多
关键词 triploid clones of Populus tomentosa carr. FTIR spectrum ^13C-NMR MWL LCC
下载PDF
Analysis of the Volatile Constituents of PinusTabulaeformis Carr. Pine Cones
5
作者 ZHANG Wei-hua and HOU Dong-yan(Department of Chemislry, Anshan Normal College,Anshan, 114005)HUI Rui-hua and JING Run(Experiment centre, Liaoning University, Shengyang 110036 ) 《Chemical Research in Chinese Universities》 SCIE CAS CSCD 1994年第4期360-363,共4页
AnalysisoftheVolatileConstituentsofPinusTabulaeformisCarr.PineConesZHANGWei-huaandHOUDong-yan(DepartmentofCh... AnalysisoftheVolatileConstituentsofPinusTabulaeformisCarr.PineConesZHANGWei-huaandHOUDong-yan(DepartmentofChemislry,AnshanNor... 展开更多
关键词 Capillary GC/MS method identification Pinus tabulaeformis carr. pinecones Volatile oils
下载PDF
THE FIBER MORPHOLOGY VARIATION OF TRIPLOID CLONE OF POPULUS TOMENTOSA CARR.AND ITS SUPPOSED HARVESTING AGE FOR THE PAPER INDUSTRY 被引量:1
6
作者 YongmingFan ZhiyiZhang +4 位作者 YiminXie dakaiRen yuanyuanLuo yuyingWu jingHe 《天津科技大学学报》 CAS 2004年第A02期329-332,共4页
The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 ye... The fiber morphology variation of triploid clone of Populus tomentosa Carr. and the supposed harvesting age for the paper industry were investigated in this paper. The results shows that in the first few years, 2-4 years for example, the fiber length at breast high grows faster than it does in the later years. But the standard deviation of distribution in fiber length at breast high in mature wood is larger than in the young tree. The technologically harvestable age of triploid clone of Populus tomentosa Carr., BL304 could be 4-7 year old to meet the requirement for paper industry. The distribution of fiber length become concentrated within an annual ring as the tree grows. The test results also show that the cloned poplar has a small Runkel ratio value (less than 0.4, generally about 0.3), and this ratio increases slightly with the tree grows. 展开更多
关键词 纤维形态学 形态学变更 三倍体克隆 造纸业 树木年龄 杨属
下载PDF
CARR减少冷源系统氦气消耗量的研究与实践
7
作者 张帅 邹之全 李建龙 《产业创新研究》 2024年第4期87-89,共3页
中国先进研究堆(CARR)冷源系统运行多年,随着设备老化,氦气消耗量较多。通过对氦制冷系统中三个相对独立的部分不同运行状态下的氦气消耗量的研究,查明了氦气消耗情况,提出了减少冷源系统氦气消耗量的措施并进行了实施,氦制冷系统的氦... 中国先进研究堆(CARR)冷源系统运行多年,随着设备老化,氦气消耗量较多。通过对氦制冷系统中三个相对独立的部分不同运行状态下的氦气消耗量的研究,查明了氦气消耗情况,提出了减少冷源系统氦气消耗量的措施并进行了实施,氦制冷系统的氦气消耗量减少效果明显。本文对冷源系统减少氦气消耗量措施和实施情况进行了介绍。 展开更多
关键词 carr 氦制冷系统 消耗量 减少
下载PDF
DRAGON/DONJON程序在CARR物理计算中的适用性研究
8
作者 乔硕 乔雅馨 +1 位作者 冉怀昌 朱吉印 《核技术》 EI CAS CSCD 北大核心 2024年第10期169-177,共9页
反中子阱型研究堆独特的堆芯和反射层结构对传统上适用于动力堆的确定论堆芯物理计算方法提出了挑战。使用确定论程序DRAGON/DONJON对反中子阱型设计的中国先进研究堆(China Advanced Research Reactor,CARR)进行了堆芯物理计算与适用... 反中子阱型研究堆独特的堆芯和反射层结构对传统上适用于动力堆的确定论堆芯物理计算方法提出了挑战。使用确定论程序DRAGON/DONJON对反中子阱型设计的中国先进研究堆(China Advanced Research Reactor,CARR)进行了堆芯物理计算与适用性分析。采用了多组件方法改善CARR堆芯组件均匀化计算的环境影响;使用OPTEX反射层优化方法对反射层均匀化群常数进行修正。将蒙特卡罗方法的计算结果作为参考解,使用DRAGON程序挂载几种常用的多群截面库进行组件计算,选择偏差最小的SHEM-295作为CARR堆芯物理计算截面库。将DRAGON/DONJON的计算结果与传统“三步法”和参考解进行对比表明:临界工况附近的有效增殖系数keff、堆芯活性区和重水箱中间位置的热中子注量率分布以及标准燃料组件的功率分布等核特性参数偏差较小。对于堆芯与重水箱交界、水池外真空边界、跟随体组件等处计算结果出现较大偏差的原因进行了分析。证明了使用DRAGON/DONJON程序进行CARR物理计算具备可行性且相较于传统“三步法”计算精度有了明显改善,能够满足CARR堆上实验方案设计、运行参数快速计算分析等需求。 展开更多
关键词 中国先进研究堆 DRAGON DONJON 组件均匀化 扩散计算
下载PDF
CARR堆启动辅助中子监测装置设计研究
9
作者 朱学微 王玉林 +3 位作者 陆双桐 罗忠 贾月光 窦勤明 《核电子学与探测技术》 CAS 北大核心 2023年第3期540-545,共6页
针对中国先进研究堆(CARR)反应堆启动过程中源量程探测器盲区的问题,设计了反应堆启动辅助中子监测装置。在反应堆启动初期,通过在反射层内垂直孔道中增加中子监测装置,可解决堆外探测盲区的问题。通过反应堆启动试验验证了设计的合理性... 针对中国先进研究堆(CARR)反应堆启动过程中源量程探测器盲区的问题,设计了反应堆启动辅助中子监测装置。在反应堆启动初期,通过在反射层内垂直孔道中增加中子监测装置,可解决堆外探测盲区的问题。通过反应堆启动试验验证了设计的合理性,取得良好的试验效果。试验结果表明,在堆启动初期,堆外探测器无法探测到堆内中子的变化,本装置可实现连续中子探测,并完成与堆外探测器的量程衔接。本装置解决了探测器盲区的问题,为反应堆安全运行提供了保障。 展开更多
关键词 carr 反应堆启动 核测量盲区 中子探测
下载PDF
CARR自给能探测器实验设计与验证研究
10
作者 乔雅馨 陶杰 吴小飞 《核科学与工程》 CAS CSCD 北大核心 2023年第3期517-521,共5页
辐照靶件的释热计算对堆内实验设计影响重大。本文依据在CARR堆上开展的自给能探测器实验,分析了不同核评价数据库在辐射俘获反应释热计算上的差异来源,并对较早版本数据库的计算结果进行了一定的修正。实验结果表明,以ENDF/B-VⅢ.0等... 辐照靶件的释热计算对堆内实验设计影响重大。本文依据在CARR堆上开展的自给能探测器实验,分析了不同核评价数据库在辐射俘获反应释热计算上的差异来源,并对较早版本数据库的计算结果进行了一定的修正。实验结果表明,以ENDF/B-VⅢ.0等库为代表的数据库计算结果更为合理,并建议研究者在进行后续堆内实验设计时,关注KERMA因子的能量平衡情况,优先采用数据更为完备的核评价数据库进行计算。 展开更多
关键词 自给能探测器 释热计算 核评价数据库 carr
下载PDF
Cloning and Expression Analysis of PtFATB Gene Encoding the Acyl-acyl Carrier Protein Thioesterase in Populus tomentosa Carr 被引量:1
11
作者 周洲 张德强 卢孟柱 《Journal of Genetics and Genomics》 SCIE CAS CSCD 北大核心 2007年第3期267-274,共8页
Acyl-ACP thioesterases (FATs) terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzy... Acyl-ACP thioesterases (FATs) terminates the fatty acid synthesis and allow the transport of fatty acids out of the plastids, which are the important determinants of cellular metabolism. FATB is a member of FAT enzymes that has been described previously in most of the plants. In silico cloning is a new method that utilizes the bioinformatics on the complete genome and available EST database. In this study, a full-length cDNA clone of PtFATB gene was isolated from Populus tomentosa using this approach. It is 1,450 bp in length and the open reading frame encodes a peptide of 421 amino acids. The predicted amino acid sequence shows significant homology with those from other plant species, which contain typical domains owned by FATB proteins. The transcripts of PtFATB were abundant in leaves, and less in roots detected by using semiquantitative RT-PCR. When the shoots were subjected to the stress treatments (cold, dry, NaC1) and ABA (Abscisic acid), the expression of PtFATB was only slightly reduced under the treatment of low temperature. This suggests that the expression of PtFATB is in a constitutive fashion. This study provides the basis not only for the identification and characterization of this gene but also for the improvement of cold tolerance by controlling the expression of the PtFATB gene in trees in near future. 展开更多
关键词 Populus tomentosa carr. Acyl-acyl carrier protein thioesterase (PtFATB) in silico and molecular cloning RT-PCR expression analysis
下载PDF
成年雄性毛白杨组培幼化技术研究
12
作者 张劲 王永格 +6 位作者 彭玉信 李国雷 王茂良 张恒月 常笑超 郦金今 刘勇 《中南林业科技大学学报》 CAS CSCD 北大核心 2024年第8期9-15,26,共8页
【目的】毛白杨以无性繁殖为主,而无性繁殖材料往往存在老化现象,严重影响苗木质量,研究繁殖材料的幼化技术对于改善苗木质量,促进无性林业发展有重要意义。【方法】以北京大兴区站上村的200年生雄性毛白杨为对象,取其根萌条为繁殖材料... 【目的】毛白杨以无性繁殖为主,而无性繁殖材料往往存在老化现象,严重影响苗木质量,研究繁殖材料的幼化技术对于改善苗木质量,促进无性林业发展有重要意义。【方法】以北京大兴区站上村的200年生雄性毛白杨为对象,取其根萌条为繁殖材料,探索2种灭菌试剂处理条件下,不同灭菌时间对外植体成活与生长的影响,同时在MS培养基中设置不同激素组合研究其增殖的最佳效果,筛选出适合其生长的最佳增殖培养基,通过继代培养研究此200年生成年雄性毛白杨的组培幼化技术。【结果】结果表明,0.1%氯化汞溶液的灭菌效果比10%次氯酸钠溶液效果好,最佳灭菌处理为0.1%氯化汞7 min,成活率为57%;最佳增殖培养基为MS+0.7 mg/L 6-BA+0.01 mg/L NAA,最高丛生芽分化系数为2.23,茎高生长量≥1 cm苗的数量比例为53.33%,显著高于其他处理;随着继代次数的增加,生长周期由63 d(1代)降至44 d(4代),继代培养增殖系数由0.93(1代)提升至4.85(4代),茎高生长量≥3 cm苗的数量比也从2.23%(1代)显著增至62.34%(4代)。【结论】此200年生毛白杨繁殖材料存在一定程度的老化现象,母株的年龄可能影响其根萌条的幼化程度,但随着继代次数的增加,生长势有了显著的提高,说明多次继代培养有较明显的幼化作用,且随着继代次数的增加,幼化效果也越好。 展开更多
关键词 组织培养 成熟树木 生理衰弱 幼化 雄性毛白杨
下载PDF
Genetic Control of Air-Dried Wood Density, Mechanical Properties and Its Implication for Veneer Timber Breeding of New Triploid Clones in Populus tomentosa Carr
13
作者 邢新婷 张志毅 《Forestry Studies in China》 CAS 2002年第2期52-60,共9页
The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood... The wood samples of 9 triploid clones of Populus tomentosa Carr. taken from a 9 year old clonal test site were analyzed in order to investigate the genetic variation of wood properties, including air dried wood density and some mechanical properties. The results showed that significant or extremely significant difference in air dried wood density and the mechanical properties existed among the clones, this means these wood properties were under moderate or strong genetic controls and could be improved by genetic manipulations. The radial and vertical variation patterns of air dried wood density were also studied and the results were found to coordinate with other previous research results. The vertical variation patterns of most mechanical properties within the individual tree also conformed to the general wood theories except the modulus of elasticity and cross section hardness. Among the mechanical properties, modulus of elasticity (MOE) and tangent section hardness were under strong genetic control, with the clonal repeatabilities being 0 90 and 0 80, respectively. However, the clonal repeatabilities of other mechanical properties under study were a little lower than above two indexes. Genetic correlation analysis indicated that super clonal selection and breeding for veneer timber could be realized through indirect selection of wood density and form indexes. 展开更多
关键词 Populus tomentosa carr. triploid clones air dried wood density mechanical properties genetic variation
下载PDF
瞬发γ中子活化分析测定微量硼
14
作者 唐婵娟 姚永刚 +1 位作者 肖才锦 赵守智 《中国无机分析化学》 CAS 北大核心 2024年第12期1705-1714,共10页
利用中国先进研究堆(CARR)建立的瞬发γ中子活化分析系统(CARR-PGNAA),首次开展了高温合金标准物质(SRM1250和GH4169)中的B含量无损分析。研究发现,B的特征γ峰(478 keV)由于多普勒效应存在近20 keV的展宽,且由于样品基体元素的干扰导致... 利用中国先进研究堆(CARR)建立的瞬发γ中子活化分析系统(CARR-PGNAA),首次开展了高温合金标准物质(SRM1250和GH4169)中的B含量无损分析。研究发现,B的特征γ峰(478 keV)由于多普勒效应存在近20 keV的展宽,且由于样品基体元素的干扰导致B峰极不规则,两者均会影响B含量的精准定量分析。因此,初步通过扣除主要干扰元素Ni和Co对B峰产生的影响来矫正干扰峰并拟合B峰,获得高温合金中B含量与计数率之间的线性关系。分析结果表明,扣除干扰后B特征峰计数率随着其含量呈线性增加,线性拟合度趋近于1,进一步验证了CARR-PGNAA系统的可行性,为B的精准定量奠定了基础。 展开更多
关键词 PGNAA carr 高温合金 无损分析
下载PDF
CARR堆冷中子瞬发伽玛活化分析系统及实验研究 被引量:9
15
作者 姚永刚 肖才锦 +7 位作者 金象春 运威旭 刘旭东 唐婵娟 石丛 杨俊凯 王平生 倪邦发 《同位素》 CAS 2018年第6期362-369,共8页
利用中国先进研究堆(CARR)在国内首次开展了冷中子瞬发伽玛活化分析(CNPGAA)实验,采用定制加长的电制冷高纯锗(HPGe)探测器和先进的数字多道谱仪DSPEC~? -502进行测量,获得了NH_4Cl样品中元素冷中子瞬发伽玛谱和本底谱等数据,同时利用... 利用中国先进研究堆(CARR)在国内首次开展了冷中子瞬发伽玛活化分析(CNPGAA)实验,采用定制加长的电制冷高纯锗(HPGe)探测器和先进的数字多道谱仪DSPEC~? -502进行测量,获得了NH_4Cl样品中元素冷中子瞬发伽玛谱和本底谱等数据,同时利用伽玛放射源^(152)Eu、^(137)Cs、^(60)Co以及NH_4Cl产生的瞬发伽玛射线对探测器在宽能区0.1~8MeV进行能量刻度。为降低环境辐射本底,HPGe探测器外围采用环形锗酸铋(BGO)康普顿谱仪,10cm铅以及含~6Li和^(10)B材料对中子束流准直屏蔽。此外,利用金片活化法测量了CARR堆运行功率为15 MW时有无冷源情况下冷中子导管B(CNGB)末端1m处的中子注量率,结果显示有冷源时中子注量率可提高一个量级。 展开更多
关键词 冷中子活化分析 中国先进研究堆(carr) 瞬发伽玛谱 中子注量率
下载PDF
CARR保护系统设计 被引量:5
16
作者 张明葵 杨自觉 +4 位作者 金华晋 曾海 肖晨 徐启国 宋国良 《核动力工程》 EI CAS CSCD 北大核心 2006年第S2期146-149,162,共5页
中国先进研究堆(CARR)保护系统采用数字化技术,执行反应堆的安全保护功能,包括反应堆保护和事故后监测两个子系统。本文介绍了CARR保护系统的设计以及技术特点,所采用的技术方案适合于CARR的工程应用,并达到保护系统所要求的系统可靠性... 中国先进研究堆(CARR)保护系统采用数字化技术,执行反应堆的安全保护功能,包括反应堆保护和事故后监测两个子系统。本文介绍了CARR保护系统的设计以及技术特点,所采用的技术方案适合于CARR的工程应用,并达到保护系统所要求的系统可靠性和可用性。 展开更多
关键词 中国先进研究堆(carr) 数字化保护系统 设计
下载PDF
基于Carr指数法的高炉喷煤流动特性研究 被引量:6
17
作者 祁成林 冯根生 于春梅 《实验技术与管理》 CAS 北大核心 2016年第8期54-58,共5页
应用Carr指数法对高炉喷吹煤粉的松装密度、振实密度、压缩率、自然坡角、板勺角、均匀度、崩溃角、差角、分散度的测定进行分析。对照Carr流动指数表及喷流指数表,对该煤种喷吹性能进行合理的分析。Carr指数法补充了安息角测量的不足,... 应用Carr指数法对高炉喷吹煤粉的松装密度、振实密度、压缩率、自然坡角、板勺角、均匀度、崩溃角、差角、分散度的测定进行分析。对照Carr流动指数表及喷流指数表,对该煤种喷吹性能进行合理的分析。Carr指数法补充了安息角测量的不足,使高炉喷吹煤粉的流动性及喷流性的模拟更加科学合理。通过Carr指数法分析,煤粉的流动特性与煤粉变质程度正相关,煤粉喷流特性与煤粉变质程度负相关。 展开更多
关键词 高炉喷煤 carr指数法 流动性 喷流特性
下载PDF
CARR热工水力与安全分析程序TSACC的开发与验证 被引量:2
18
作者 田文喜 秋穗正 +3 位作者 苏光辉 贾斗南 刘兴民 张建伟 《核动力工程》 EI CAS CSCD 北大核心 2009年第1期40-44,共5页
针对中国先进研究堆(CARR)的具体结构和运行特点,利用Fortran程序设计语言开发了CARR热工水力安全分析程序TSACC(Thermal-hydraulic and Safety Analysis Code for CARR)。TSACC完全采用模块化结构设计,便于二次开发,可应用于多种事故... 针对中国先进研究堆(CARR)的具体结构和运行特点,利用Fortran程序设计语言开发了CARR热工水力安全分析程序TSACC(Thermal-hydraulic and Safety Analysis Code for CARR)。TSACC完全采用模块化结构设计,便于二次开发,可应用于多种事故工况及其他堆型的分析计算。基于程序验证的基本思想,分别利用TSACC和商用程序RELAP5/Mod3对CARR丧失厂外电源事故工况进行了计算。得到了堆芯平均通道以及最热通道内冷却剂流量、温度和最小偏离泡核沸腾比(MDNBR)等参数的瞬态响应。将TSACC计算结果与RELAP5/Mod3计算结果进行比较、分析后发现:除冷却剂发生倒流前后二者计算结果相差较大外,总体吻合较好。局部值差别较大的主要原因是两个程序在低流速区域选用的换热公式不同。程序验证结果表明了TSACC的准确性和适用性。 展开更多
关键词 carr 热工水力 安全分析 程序验证 丧失厂外电源事故 RELAP5/Mod3 TSACC
下载PDF
中国先进研究堆(CARR)上的中子散射工程 被引量:18
19
作者 陈东风 勾成 叶春堂 《核技术》 EI CAS CSCD 北大核心 2005年第2期127-129,共3页
中子散射技术利用中子不带电、穿透力极强、能直接鉴别核素、较之 X 射线对轻元素灵敏、具有磁矩和粒子、波动二重性等特点,使之成为一种独特的、从原子和分子尺度上研究各种物质结构和微观世界运动规律的高新技术。中国先进研究堆 (CA... 中子散射技术利用中子不带电、穿透力极强、能直接鉴别核素、较之 X 射线对轻元素灵敏、具有磁矩和粒子、波动二重性等特点,使之成为一种独特的、从原子和分子尺度上研究各种物质结构和微观世界运动规律的高新技术。中国先进研究堆 (CARR)上的中子散射工程将充分利用中国先进研究堆为中子散射工程提供的高通量、具有冷中子源、切向水平孔道等有利条件,建造三台新谱仪,更新原有的五台谱仪,瞄准世界先进水平,建立起研究手段基本配套、基本上覆盖中子散射研究的主要领域、强调应用又具备必要的基础研究能力的中子散射设备,为生命科学、材料科学、物理、化学、地矿、环境等各种学科及工程技术方面的研究,为国防工业和国民经济的应用提供先进的中子散射技术。其最终目标是建立起符合我国国情、其综合研究能力与世界先进水平接轨的中子散射国家重点实验室,使之成为我国二十一世纪中子散射研究和应用的中心及人才培养基地。 展开更多
关键词 中子散射技术 中国先进研究堆
下载PDF
基于白光干涉测试技术的改进Carré相移算法 被引量:3
20
作者 李慧鹏 谭朦曦 +2 位作者 朱伟伟 郑晓 李皎 《光子学报》 EI CAS CSCD 北大核心 2016年第6期62-67,共6页
为了减小白光相移干涉法测量物体微观形貌时产生的误差,对极值法的搜索路径进行优化后与Carré相移算法相结合,提出一种基于白光干涉测试技术的改进Carré相移算法.该算法减小了光源扰动及电荷耦合元件散粒噪声带来的影响,且对... 为了减小白光相移干涉法测量物体微观形貌时产生的误差,对极值法的搜索路径进行优化后与Carré相移算法相结合,提出一种基于白光干涉测试技术的改进Carré相移算法.该算法减小了光源扰动及电荷耦合元件散粒噪声带来的影响,且对相移器的线性误差不敏感,免去了相位解包裹过程,提高了运算效率.采用单刻线样块对扫描步距进行校准实现了光源中心波长的在线修正,减小了由于光源特性及环境扰动误差带来的影响.采用不同算法对标准粗糙度样块进行三维形貌恢复以及表面粗糙度的重复性测量实验,结果表明:该算法对表面粗糙度的测量结果较传统白光干涉算法准确度提高,测量重复性优于1%. 展开更多
关键词 白光干涉 中心波长 线性误差 carré相移算法 相位解包裹
下载PDF
上一页 1 2 41 下一页 到第
使用帮助 返回顶部