Colliding Bodies Optimization with Machine Learning Based Parkinson’s Disease Diagnosis

Parkinson’s disease(PD)is one of the primary vital degenerative diseases that affect the Central Nervous System among elderly patients.It affect their quality of life drastically and millions of seniors are diagnosed with PD every year worldwide.Several models have been presented earlier to detect the PD using various types of measurement data like speech,gait patterns,etc.Early identification of PD is important owing to the fact that the patient can offer important details which helps in slowing down the progress of PD.The recently-emerging Deep Learning(DL)models can leverage the past data to detect and classify PD.With this motivation,the current study develops a novel Colliding Bodies Optimization Algorithm with Optimal Kernel Extreme Learning Machine(CBO-OKELM)for diagnosis and classification of PD.The goal of the proposed CBO-OKELM technique is to identify whether PD exists or not.CBO-OKELM technique involves the design of Colliding Bodies Optimization-based Feature Selection(CBO-FS)technique for optimal subset of features.In addition,Water Strider Algorithm(WSA)with Kernel Extreme Learning Machine(KELM)model is also developed for the classification of PD.CBO algorithm is used to elect the optimal set of fea-tures whereas WSA is utilized for parameter tuning of KELM model which alto-gether helps in accomplishing the maximum PD diagnostic performance.The experimental analysis was conducted for CBO-OKELM technique against four benchmark datasets and the model portrayed better performance such as 95.68%,96.34%,92.49%,and 92.36%on Speech PD,Voice PD,Hand PD Mean-der,and Hand PD Spiral datasets respectively.

A 40-GHz Colliding Pulse Mode-Locked Semiconductor Laser

A monolithically active-passive integrated colliding pulse mode-locked semiconductor laser is demonstrated in the InGaAsP//InP material system. The device is mode locked at the second harmonic passive mode-locking regime with a wide mode-locking range. Pulse trains with the repetition rate of 40 GHz, 3-dB rf line width of 25 kHz, the pulse width of 2.5 ps, and a nearly transform-limited time-bandwidth product of 0.53 are obtained.

Two-Flux Colliding Plane Waves in String Theory

We construct the two-flux colliding plane wave solutions in higher-dimensional gravity theory with dilaton,and two complementary fluxes. Two kinds of solutions have been obtained: Bell-Szekeres (BS) type and homogeneous type. After imposing the junction condition, we find that only the BS type solution is physically well-defined. Furthermore, we show that the future curvature singularity is always developed for our solutions.

Proposal of a Deuterium-Deuterium Fusion/PWR Fission Hybrid Reactor

This article proposes to associate a Deuterium-Deuterium (D-D) fusion reactor with a PWR (fission Pressurized Water Reactor) in a hybrid reactor. Even if the mechanical gain (Q factor) of the D-D fusion reactor is below the unity and consequently consumes more energy than it supplies, due to the high energy amplification factor of the PWR fission reactor, the global yield is widely superior to 1. As the energy supplied by the fusion reactor is relatively low and as the neutrons supplied are mainly issued from D-D fusions (at 2.45 MeV), the problems of heat flux and neutrons damage connected with materials, as with D-T fusion reactors are reduced. Of course, there is no need to produce Tritium with this D-D fusion reactor. This type of reactor is able to incinerate any mixture of natural Uranium, natural Thorium and depleted Uranium (waste issued from enrichment plants), with natural Thorium being the best choice. No enriched fuel is needed. So, this type of reactor could constitute a source of energy for several thousands of years because it is about 90 more efficient than a standard fission reactor, such as a PWR or a Candu one, by extracting almost completely the energy from the fertile materials U238 and Th232. For the fission part, PWR technology is mature. For the fusion part, it is based on a reasonable hypothesis done on present Stellarators projects. The working of this reactor is continuous, 24 hours a day. In this paper, it will be targeted a reactor able to provide net electric power of about 1400 MWe, as a big fission power plant.

Proposal of a Deuterium-Deuterium Fusion Reactor Intended for a Large Power Plant

This article looks for the necessary conditions to use Deuterium-Deuterium (D-D) fusion for a large power plant. At the moment, for nearly all the projects (JET, ITER…) only the Deuterium-Tritium (D-T) fuel is considered for a power plant. However, as shown in this article, even if a D-D reactor would be necessarily much bigger than a D-T reactor due to the much weaker fusion reactivity of the D-D fusion compared to the D-T fusion, a D-D reactor size would remain under an acceptable size. Indeed, a D-D power plant would be necessarily large and powerful, i.e. the net electric power would be equal to a minimum of 1.2 GWe and preferably above 10 GWe. A D-D reactor would be less complex than a D-T reactor as it is not necessary to obtain Tritium from the reactor itself. It is proposed the same type of reactor yet proposed by the author in a previous article, i.e. a Stellarator “racetrack” magnetic loop. The working of this reactor is continuous. It is reminded that the Deuterium is relatively abundant on the sea water, and so it constitutes an almost inexhaustible source of energy. Thanks to secondary fusions (D-T and D-He3) which both occur at an appreciable level above 100 keV, plasma can stabilize around such high equilibrium energy (i.e. between 100 and 150 keV). The mechanical gain (Q) of such reactor increases with the internal pipe radius, up to 4.5 m. A radius of 4.5 m permits a mechanical gain (Q) of about 17 which thanks to a modern thermo-dynamical conversion would lead to convert about 21% of the thermal power issued from the D-D reactor in a net electric power of 20 GWe. The goal of the article is to create a physical model of the D-D reactor so as to estimate this one without the need of a simulator and finally to estimate the dimensions, power and yield of such D-D reactor for different net electrical powers. The difficulties of the modeling of such reactor are listed in this article and would certainly be applicable to a future D-He3 reactor, if any.

Energy Transfer of Peptide Ions Colliding with a Self-Assembled Monolayer Surface. The Influence of Peptide Ion Size

Summary of main observation and conclusion Atomistic dynamics of protonated polyglycine, glyn-H^+(n = 3, 5, and 7), colliding with a fluorinated octanethiol self-assembled monolayer (F-SAM) surface has been studied by trajectory calculations. The effects of peptide size on the collision processes and energy transfer efficiencies are emphasized and discussed in detail. The simulations show that the fraction of trapping, which is related to the soft-landing process, dramatically drops with the in crease in collisi on energy, but gently increases with the peptide size. The average energy transfer to the peptide ion's internal degrees of freedom, AEint, is compared with previous experiments. The limiting probability Po of energy transfer to the surface is given by fitting a function of Poexp(—b/&). Our results suggest that the efficiencies of energy transfer are less dependent on the masses, even the categories of the peptide ions, and are determined by the character of the surfaces.

Relativistic Heavy Ion Collider and the Large Hadron Collider for Heavy Ion Fusion

Heavy Ion Fusion makes use of the Relativistic Heavy Ion Collider at Brookhaven National Lab and the Large Hadron Collider in Geneva, Switzerland for Inertial Confinement Fusion. Two Storage Rings, which may or may not initially be needed, added to each of the Colliders increases the intensity of the Heavy Ion Beams making it comparable to the Total Energy delivered to the DT target by the National Ignition Facility at the Lawrence Livermore Lab. The basic Physics involved gives Heavy Ion Fusion an advantage over Laser Fusion because heavy ions have greater penetration power than photons. The Relativistic Heavy Ion Collider can be used as a Prototype Heavy Ion Fusion Reactor for the Large Hadron Collider.

Quantum electrodynamics experiments with colliding petawatt laser pulses

A new generation of high power laser facilities will provide laser pulses with extremely high powers of 10 petawatt(PW)and even 100 PW, capable of reaching intensities of 1023 W/cm^2 in the laser focus. These ultra-high intensities are nevertheless lower than the Schwinger intensity IS= 2.3×1029 W/cm^2 at which the theory of quantum electrodynamics(QED) predicts that a large part of the energy of the laser photons will be transformed to hard Gamma-ray photons and even to matter, via electron–positron pair production. To enable the investigation of this physics at the intensities achievable with the next generation of high power laser facilities, an approach involving the interaction of two colliding PW laser pulses is being adopted. Theoretical simulations predict strong QED effects with colliding laser pulses of 10 PW focused to intensities 10^(22) W/cm^2.

Simulation study of electron injection into plasma wake fields by colliding laser pulses using OOPIC

An electron injector concept for a laser-plasma accelerator has been developed which relies on the use of counter propagating ultrashort laser pulses. In this paper, we use OOPIC the fully self-consistent, twodimensional, particle-in-cell code to make a parameter study to determine the bunches that can be obtained through collisions of two collinear laser pulses in uniform plasma. A series of simulations show that one can obtain a short (<10fs) bunch with its charge of about 15pC, and energy spread of about 15%. We also discussed the variation of the transverse spot size of the electron bunch and found the bunch would undergo the betatron oscillations.

Lambda polarization at the Electron-ion collider in China

Lambda polarization can be measured through its self-analyzing weak decay, making it an ideal candidate for studying spin effects in high-energy scattering. In lepton-nucleon deep inelastic scattering(DIS), Lambda polarization measurements can probe polarized parton distribution functions(PDFs) and polarized fragmentation functions(FFs). One of the most promising facilities for high-energy nuclear physics research is the proposed Electron-ion collider in China(EicC). As a next-generation facility, EicC is set to advance our understanding of nuclear physics to new heights. In this article, we study the Lambda production in electron-proton collisions at the EicC energy, in particular the reconstruction of Lambda based on the performance of the designed EicC detector. In addition, taking spontaneous transverse polarization as an example, we provide a theoretical prediction with a statistical projection based on one month of EicC data, offering valuable insights into future research prospects.

Progressive Thermalization Fusion Reactor Able to Produce Nuclear Fusions at Higher Mechanical Gain

In the standard fusion reactors, mainly tokamaks, the mechanical gain obtained is below 1. On the other hand, there are colliding beam fusion reactors, for which, the not neutral plasma and the space charge limit the number of fusions to a very small number. Consequently, the mechanical gain is extremely low. The proposed reactor is also a colliding beam fusion reactor, configured in Stellarator, using directed beams. D+/T+ ions are injected in opposition, with electrons, at high speeds, so as to form a neutral beam. All these particles turn in a magnetic loop in form of figure of “0” (“racetrack”). The plasma is initially non-thermal but, as expected, rapidly becomes thermal, so all states between non-thermal and thermal exist in this reactor. The main advantage of this reactor is that this plasma after having been brought up near to the optimum conditions for fusion (around 68 keV), is then maintained in this state, thanks to low energy non-thermal ions (≤15 keV). So the energetic cost is low and the mechanical gain (Q) is high (>>1). The goal of this article is to study a different type of fusion reactor, its advantages (no net plasma current inside this reactor, so no disruptive instabilities and consequently a continuous working, a relatively simple way to control the reactor thanks to the particles injectors), and its drawbacks, using a simulator tool. The finding results are valuable for possible future fusion reactors able to generate massive energy in a cleaner and safer way than fission reactors.

Design and high-power test of 800-kW UHF klystron for CEPC

To reduce the energy demand and operation cost for circular electron positron collider(CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-k W continuous wave(CW) klystron operating at frequency of 650-MHz has been designed. The results of beam–wave interaction simulation with several different codes are presented. The efficiency is optimized to be 65% with a second harmonic cavity in three-dimensional(3D) particle-in-cell code CST. The effect of cavity frequency error and mismatch load on efficiency of klystron have been investigated. The design and cold test of reentrant cavities are described, which meet the requirements of RF section design. So far, the manufacturing and high-power test of the first klystron prototype have been completed.When the gun operated at DC voltage of 80 k V and current of 15.4 A, the klystron peak power reached 804 k W with output efficiency of about 65.3% at 40% duty cycle. The 1-d B bandwidth is ±0.8 MHZ. Due to the crack of ceramic window, the CW power achieved about 700 kW. The high-power test results are in good agreement with 3D simulation.

STRUCTURE DESIGN OF THE BEIJING SPECTROMETERⅢBEAM PIPE

The Beijing spectrometer Ⅲ （BESⅢ） beam pipe is in the center of the BESⅢ, which is the detector of the upgrade project of Beijing electron and positron collider （BEPC Ⅱ）. Electrons and positrons collide in the BESⅢ beam pipe. According to the demands of the BEPC Ⅱ, a key program of Chinese Academy of Sciences, the BESⅢ beam pipe is designed based on the finite elements analysis. The BESIII beam pipe is installed in the inner cylinder of the BESⅢ drift chamber. As a vacuum tube, the BESIII beam pipe is designed as 1 000 mm in length, 63 mm in inner diameter and 114 mm in outer diameter, respectively. The BESIII beam pipe consists of a central beryllium pipe cooled by EDM-1, the oil No.1 for electric discharge machining, and two extended copper pipes cooled by deionized water （DW）. The three parts are jointed by vacuum welding. Factors taken into account in the design are as follows. ① The wall thickness of the central beryllium pipe should be designed as small as possible to reduce the multi-scattering and improve the particle momentum resolution. And the wall thickness of the extended copper pipe should be designed as large as possible to protect the detectors from the backgrounds. ②The BESⅢ beam pipe must be sufficiently cooled to avoid the damage and prevents its influence to the BESⅢ drift chamber （DC） operation. The inner surface temperature of the DC inner cylinder must be maintained at 293±2 K. ③ The magnetic permeability of the materials used in the BESⅢ beam pipe must be less than 1.05 H/m to avoid large magnetic field distortions. ④ The static pressure of the vacuum chamber of the BESⅢ beam pipe must be less than 800 μPa. The simulating results show that the designed structure of the BESⅢ beam pipe satisfies the requirements mentioned above. The structure design scheme is evaluated and adonted hv the headouarters of BEPCⅡ.

High energy and high brightness laser compton backscattering gamma-ray source at IHEP

Based on the LINAC of BEPCII, a high-polarized, high bightness, energy-tunable, monoenergetic laser compton backscattering (LCS)gamma-ray source is under construction at IHEP. The gamma-ray energy range is from 1 MeV to 111 MeV. It is a powerful and hopeful researchplatform to reveal the underlying physics of the nuclear, the basic particles and the vacuum or to check the exist basic physical models, quantumelectrodynamic (QED) theories. In the platform, a 1.064 mm Nd:YAG laser system and a 10.6 mm CO_(2) laser system are employed. All the triggersignals to the laser system and the electron control system are from the only reference clock at the very beginning of the LINAC to make sure thetemporal synchronization. Two optical transition radiation (OTR) targets and two charged-couple devices (CCD) are used to monitor and to alignthe electron beam and the laser beam. With the LCS gamma-ray source, it is proposed to experimentally check the gamma-ray calibrations, thephoton-nuclear physics, nuclear astrophysics and some basic QED phenomena.

Single Charged Top-Pion Production at the Next Generation e^＋e^- Colliders

The single charged top-pion production processes e~+ e~- → tbΠ_t~- and e~+e~- → W~+Π_t~- are studied in the framework of top-color-assisted technicolor (TC2) model. Ourstudies show that the cross section σ(e~+ e~- → tbΠ_t~-) Teaches the level of tens of fb andσ(e~+ e~- → W~+Π_t~-) reaches the level of a few fb. With the yearly integrated luminosity of ￡～ 500 fb~(-1) expected at the planned colliders, one could collect thousands of charged top-pion ofevents via the process e~+ e~- → tbΠ_t~- and hundreds of events via the process e~+ e~- →W~+Π_t~-. The flavor changing decay mode Π_t~- → bc is the best channel to detect chargedtop-pion due to the clean SM background. With a large number of events and the clean background, thecharged top-pion should be observable at the planned colliders. Therefore, our studies in thispaper can help us to search for charged top-pion, and furthermore, to test the TC2 model.

Probing the TC2 model via Production of Top Quark Pairs at Tevatron and LHC

The topcolour-assisted technicolour （TC2） model is an interesting dynamical theory among the various new physics models. We cMculate the total tt cross section and the relative correction of the TC2 model to the cross section at Tevatron Run Ⅱ and LHC. At the Tevatron Run Ⅱ, the cross section predicted by the standard model （SM） is consistent with the experimental data, and in most parameter spaces of the TC2 model, the relative correction of the TC2 model to the cross section is too small to be detectable. We find that the tt cross section is more sensitive to the parameters of the TC2 model at the LHC and the relative correction of the TC2 model to the cross section is over 10% in general. Such a value of the relative correction should be large enough to be detectable at the LHC. Therefore, it is promising to find the clue of the TC2 model via the tt production at the LHC.

Beam-beam effects and mitigation in a future proton-proton collider

The beam-beam effects in a hadron collider with an unprecedented energy scale were studied.These effects are strongly related to the attainable luminosity of the collider.Long-range interactions were identified as the major factor limiting the dynamic aperture,which is strongly dependent on the crossing angle,β*,and bunch population.Different mitigation methods of the beam-beam effects were addressed,with a focus on the compensation of long-range interactions by electric curren wires.The CEPC-SPPC project is a two-stage large circular collider,with a first-stage circular electron-positron collider(CEPC)and a second-stage super proton-proton collider(SPPC).The design of the SPPC aims to achieve a center-of-mass energy of 75 TeV and peak luminosity of approximately 1×10^(35) cm^(-2)s^(-1).We studied the beam-beam effects in the SPPC and tested the effectiveness of the mitigation methods.We found that with compensation using electric current wires,the dynamic aperture is at an acceptable level.Moreover,considering the significant emittance damping in this future proton-proton collider the beam-beam effects and compensation are more complicated and are studied using long-term tracking.It was found that with a smaller emittance,the head-on interactions with a crossing angle become more prominent in reducing the beam stability,and combined head-on and long-range compensation is needed to improve the beam quality.When the reduction in population owing to burnoff was included,it was found that the coupling between the transverse and longitudinal planes at smaller emittance is the main driving source of the instabilities.Thus,crab cavities and emittance control are also necessary than just the compensation of the long-range interactions to improve the beam stability.This study serves as an example for studying the beam-beam effects in future proton-proton colliders.

Wireless Network Requirements and Solutions for the Future Circular Collider:A Hostile Indoor Environment

The European organization for nuclear research(CERN)is planning a high performance particle collider by 2050,which will update the currently used Large Hadron Collider(LHC).The design of the new experiment facility includes the definition of a suitable communication infrastructure to support the future needs of scientists.The huge amount of data collected by the measurement devices call for a data rate of at least 1 Gb/s per node,while the need of timely control of instruments requires a low latency of the order of 0.01μs.Moreover,the main tunnel will be 100 km long,and will need appropriate coverage for voice and data traffic,in a special underground environment subject also to strong radiations.Reliable voice,data and video transmission in a tunnel of this length is necessary to ensure timely and localized intervention,reducing access time.In addition,using wireless communication for voice,control and data acquisition of accelerator technical systems could lead to a significant reduction in cabling costs,installation times and maintenance efforts.The communication infrastructure of the Future Circular Collider(FCC)tunnel must be able to circumvent the problems of radioactivity,omnipresent in the tunnel.Current technologies transceivers cannot transmit in such a severely radioactive environment.This is due to the immediate destruction of any active or passive equipment by radioactivity.The scope of this paper is to determine the feasibility of robust wireless transmission in an underground radioactive tunnel environment.The network infrastructure design to meet the demand will be introduced,and the performance of different wireless technologies will be evaluated.

Single t-Quark Productions via Flavor-Changing Processes in Topcolor-Assisted Technicolor Model at Hadron Colliders

In the framework of topcolor-assisted technicolor （TC2） model, there exist tree-level flavor-changing （FC） couplings, which can result in the loop-level FC coupling tcg. Such tcg coupling can contribute significant clues at the forthcoming Large Hadron Collider （LHC） experiments. In this paper, based on the TC2 model, we study some single t-quark production processes involving tcg coupling at the Tevatron and LHC： pp（pp） → tq （q = u, d, s）, tg. We calculate the cross sections of these processes. The results show that the cross sections at the Tevatron are too small to observe the signal, but at the LHC it can reach a few pb. With the high luminosity, the LHC has considerable capability to find the single t-quark signal produced via some FC processes involving coupling tcg. On the other hand, these processes can also provide some valuable information of the coupling tcg with detailed study of the processes and furthermore provide the reliable evidence to test the TC2 model

Effects of R-Parity Violating Supersymmetry in Top Pair Production at Linear Colliders with Polarized Beams

In the minimal supersymmetric standard model with R-parity violation, the lepton number violating top quark interactions can contribute to the top pair production at a linear collider via tree-level u-channel squark exchange diagrams. We calculate such contributions and find that in the allowed range of these R-violating couplings, the top pair production rate as well as the top quark polarization and the forward-backward asymmetry can be significantly altered. By comparing the unpolarized beams with the polarized beams, we find that the polarized beams are more powerful in probing such new physics.