Effect of Rolling Process on Comprehensive Properties of Corrosion Resistant Steel for Bottom Plate of Cargo Oil Tanks

A new kind of corrosion resistant steelfor cargo oiltanks（COT）was developed.The influences of finalrolling temperature,cooling rate,and finalcooling temperature on microstructure were investigated.The proper rolling process parameters were obtained through multi-pass thermalsimulation test.The finalrolling temperature is about 820 ℃,the finalcooling temperature is about 600 ℃,and the cooling rate should be controlled between 10 ℃/s and 20 ℃/s.Based on the above analysis of the results,three groups of rolling samples by thermo mechanicalcontrolprocess are prepared.The tensile strength,yield strength,and toughness of the corrosion resistant steelare measured,which meet the requirements of DH36 steel,it can instruct the actualrolling production.The corrosion behaviour is also researched by weight loss and electrochemicalimpedance spectroscopic method,and it is found that the steelhas good corrosion resistance performance,the best one is No.3 steel,the corrosion rate of which is about 1/4 of the accepted criterion.

Enhanced comprehensive properties of stereolithography 3D printed alumina ceramic cores with high porosities by a powder gradation design

Ceramic cores with complex structures and optimized properties are critical for hollow turbine blades applied in aeroengines.Compared to traditional methods,additive manufacturing(AM)presents great advantages in forming complex ceramic cores,but how to balance the porosity and strength is an enormous challenge.In this work,alumina ceramic cores with high porosity,moderate strength,and low high-temperature deflection were prepared using stereolithography(SLA)3D printing by a novel powder gradation design strategy.The contradiction between porosity and flexural strength is well adjusted when the mass ratio of the coarse,medium,and fine particles is 2:1:1 and the sintering temperature is 1600℃.The fracture mode of coarse particles in sintered SLA 3D printing ceramic transforms from intergranular fracture to transgranular fracture with the increase of sintering temperature and the proportion of fine powders in powder system.The sintered porosity has a greater influence on the high-temperature deflection of SLA 3D printed ceramic cores than grain size.On this basis,a"non-skeleton"microstructure model of SLA 3D printed alumina ceramic cores is created to explain the relationship between the sintering process and properties.As a result,high porosity(36.4%),appropriate strength(50.1 MPa),and low high-temperature deflection(2.27 mm)were achieved by optimizing particle size gradation and sintering process,which provides an insight into the important enhancement of the comprehensive properties of SLA 3D printed ceramic cores.

Comprehensive Properties of 400 MPa Grade Corrosion-Resistant Rebar

The corrosion resistance of the developed 400 MPa grade rebar was evaluated by a series of experiments, including cycles of corrosion-accelerating tests in the simulated concrete pore solution and reinforced concrete cube corrosion-accelerating tests and in situ exposure experiments in chloride ions condition. In addition, the tensile and bending properties and the connection adaptability of the developed rebar were investigated. The results verify that the comprehensive properties of the corrosion-resistant rebar are excellent. The tensile and bending properties of the rebar are up to the standard of GB1499-2007. The common welding method and the mechanical connection technology of knob-cut roiled parallel thread splicing are suitable for the rebar.

COMPREHENSIVE EVALUATION OF FAULT-TOLERANT PROPERTIES OF REDUNDANT ROBOTS

When a redundant robot performs a fault-tolerant operation for locked joint failures, its fault tolerant properties should include dexterity and sudden change of joint velocity at the moment of locking failed joints and the dexterity during the post-failure. Firstly three fault-tolerant indexes, reduced condition number, sudden change of relative joint velocity and centrality are proposed, which can comprehensively evaluate the kinematical performance of a redundant robot during its entire fault-tolerant operations. Then, the influence of the initial postures of robot＇s end-effector on these fault-tolerant indexes is analyzed with a planar robot and a spatial robot. Simulation results show that for a given task the joint trajectory with the best comprehensive effect of fault tolerance can be determined by optimizing the initial posture of a robot.

Effect of Li on formation of long period stacking ordered phases and mechanical properties of Mg-Gd-Zn alloy

Alloys with composition of Mg_(96-x)Gd_3Zn_1Li_x(at.%)(x=0, 2, 4, and 6) were prepared by conventional casting. The microstructures of these alloys under as-cast and solid-solution conditions have been observed, and the mechanical properties were investigated. The results showed that Li is an effective element to refine the grains and break the eutectic networks in as-cast MgGd_3Zn_1 alloy. During solid solution treatment, these broken eutectic networks are spheroidized and highly dispersed. In addition, plentiful lamellar long period stacking ordered(LPSO) phases are precipitated in an α-Mg matrix when the Li addition is not more than 4%. Solid-solution treated Mg_(92)Gd_3Zn_1Li_4 alloy exhibits an optimal ultimate tensile strength(UTS) of 226 MPa and elongation of 5.8%. The strength of MgGd_3Zn_1 alloy is improved significantly, meanwhile, the toughness is apparently increased.

Elevating the comprehensive thermal properties of rare-earth cerates through high-entropy design

In the rapidly evolving aerospace sector,the quest for sophisticated thermal barrier coating(TBC)materials has intensified.These materials are primarily sought for their superior comprehensive thermal characteristics,which include a low thermal conductivity coupled with a high coefficient of thermal expansion(CTE)that synergizes with the substrate.In our study,we adopt a solid-state method to synthesize a series of high-entropy rare-earth cerates:La_(2)Ce_(2)O_(7)(1RC),(La_(1/2)Nd_(1/2))2Ce_(2)O_(7)(2RC),(La_(1/3)Nd_(1/3)Sm_(1/3))_(2)Ce_(2)O_(7)(3RC),(La_(1/4)Nd_(1/4)Sm_(1/4)Eu_(1/4))_(2)Ce_(2)O_(7)(4RC),and(La_(1/5)Nd_(1/5)Sm_(1/5)Eu_(1/5)Gd_(1/5))_(2)Ce_(2)O_(7)(5RC),all sintered at 1,600℃ for 10 h.We thoroughly examine their phase structure,morphology,elemental distribution,and thermal properties.Our in-depth analysis of the phonon scattering mechanisms reveals that 4RC and 5RC exhibit exceptional thermal properties:high CTEs of 13.00×10^(−6) K^(−1) and 12.77×10^(−6) K^(−1) at 1,400℃,and low thermal conductivities of 1.55 W/(m·K)and 1.68 W/(m·K)at 1,000℃,respectively.Compared to other TBC systems,4RC and 5RC stand out for their excellent thermal characteristics.This study significantly contributes to the development of high-entropy oxides for TBC applications.

Property analysis of bistatic forward-looking SAR with arbitrary geometry

Bistatic forward-looking synthetic aperture radar（SAR） has many advantages and applications owing to its twodimensional imaging capability.There could be various imaging configurations because of the geometric flexibility of bistatic platforms,resulting in kinds of models built independently among which there could be some similar even the same motion features.Comprehensive research on such systems in a more comprehensive and general point of view is required to address their difference and consistency.Property analysis of bistatic forwardlooking SAR with arbitrary geometry is achieved including stripmap and spotlight modes on airborne platform,missile-borne platform,and hybrid platform of both.Emphasis is placed on azimuth space variance of some key parameters significantly affecting the subsequent imaging processing,based on which the frequency spectra are further described and compared considering respective features of different platforms for frequency imaging algorithm developing.Simulation results confirm the effectiveness and correctness of our analysis.

Design biodegradable Zn alloys: Second phases and their significant influences on alloy properties

Alloying combined with plastic deformation processing is widely used to improve mechanical properties of pure Zn.As-cast Zn and its alloys are brittle.Beside plastic deformation processing,no effective method has yet been found to eliminate the brittleness and even endow room temperature super-ductility.Second phase,induced by alloying,not only largely determines the ability of plastic deformation,but also influences strength,corrosion rate and cytotoxicity.Controlling second phase is important for designing biodegradable Zn alloys.In this review,knowledge related to second phases in biodegradable Zn alloys has been analyzed and summarized,including characteristics of binary phase diagrams,volume fraction of second phase in function of atomic percentage of an alloying element,and so on.Controversies about second phases in Zn-Li,Zn-Cu and Zn-Fe systems have been settled down,which benefits future studies.The effects of alloying elements and second phases on microstructure,strength,ductility,corrosion rate and cytotoxicity have been neatly summarized.Mg,Mn,Li,Cu and Ag are recommended as the major alloying elements,owing to their prominent beneficial effects on at least one of the above properties.In future,synergistic effects of these elements should be more thoroughly investigated.For other nutritional elements,such as Fe and Ca,refining second phase is a matter of vital concern.

A novel Cu-doped high entropy alloy with excellent comprehensive performances for marine application

High entropy alloy(HEA)has attracted great interests as one of the promising multifunctional materials in marine applications.However,Cu as an effective biocide tends to form segregation in HEA,which could deteriorate corrosion and induce brittle fracture.Herein,we report a strategy to tailor the existing form of Cu in HEA from undesired large-scale segregation to uniform distribution with dispersed nanoscale precipitation,while retaining the unique structure characteristics of HEA.Eliminating Cu segregation improves toughness and avoids serious corrosion in the grain boundary.Uniform distribution with dispersed nanoscale precipitation of Cu further enhances the antifouling and lubricating abilities of Cu-doped HEA.Tailored AlCoCrFeNiCu_(0.5)HEA in this work has excellent comprehensive properties combining good mechanical properties,outstanding antifouling abilities,superior resistance to corrosion and wear.Furthermore,the corresponded mechanisms are discussed in terms of Cu-segregation-eliminated,nanoscale-Cu-precipitate-forming and comprehensive properties.

Effect of lanthanum addition on microstructure and corrosion behavior of Al-Sn-Bi anodes

Novel Al-Sn-Bi anodes with and without lanthanum （La） were prepared.To evaluate the corrosion properties of the anodes,constant current and dynamic loop tests were carried out to determine its efficiency and corrosion rate.Optical microscopy （OM）,transmission electron microscopy （TEM） and energy spectrum analysis techniques were used to examine and analyze microstructure and corrosion behavior of the specimens.The result showed that the Al-Sn-Bi anodes with La additions revealed higher current efficiency and anticorrosion in artificial environment.Segregation phase of anodes with La additions got more homogenous than that without La additions.Its grains were fined and the amount of segregation Fe-phase was reduced.