A Stable Open-Shell Conjugated Diradical Polymer with Ultra-High Photothermal Conversion Efficiency for NIR-Ⅱ Photo-Immunotherapy of Metastatic Tumor

Massive efforts have been concentrated on the advance of eminent near-infrared(NIR) photothermal materials(PTMs) in the NIR-Ⅱ window(1000–1700 nm), especially organic PTMs because of their intrinsic biological safety compared with inorganic PTMs. However, so far, only a few NIR-Ⅱresponsive organic PTMs was explored, and their photothermal conversion efficiencies(PCEs) still remain relatively low. Herein, donor–acceptor conjugated diradical polymers with open-shell characteristics are explored for synergistically photothermal immunotherapy of metastatic tumors in the NIR-Ⅱ window. By employing side-chain regulation, the conjugated diradical polymer TTB-2 with obvious NIR-Ⅱ absorption was developed, and its nanoparticles realize a record-breaking PCE of 87.7% upon NIR-Ⅱ light illustration. In vitro and in vivo experiments demonstrate that TTB-2 nanoparticles show good tumor photoablation with navigation of photoacoustic imaging in the NIR-Ⅱ window, without any side-effect. Moreover, by combining with PD-1 antibody,the pulmonary metastasis of breast cancer is high-effectively prevented by the efficient photo-immunity effect. Thus, this study explores superior PTMs for cancer metastasis theranostics in the NIR-Ⅱ window, offering a new horizon in developing radical-characteristic NIR-Ⅱ photothermal materials.

Recent advances and innovations in the design and fabrication of wearable flexible biosensors and human health monitoring systems based on conjugated polymers

Wearable biosensors have received great interest as patient-friendly diagnostic technologies because of their high flexibility and conformability.The growing research and utilization of novel materials in designing wearable biosensors have accelerated the development of point-of-care sensing platforms and implantable biomedical devices in human health care.Among numerous potential materials,conjugated polymers(CPs)are emerging as ideal choices for constructing high-performance wearable biosensors because of their outstanding conductive and mechanical properties.Recently,CPs have been extensively incorporated into various wearable biosensors to monitor a range of target biomolecules.However,fabricating highly reliable CP-based wearable biosensors for practical applications remains a significant challenge,necessitating novel developmental strategies for enhancing the viability of such biosensors.Accordingly,this review aims to provide consolidated scientific evidence by summarizing and evaluating recent studies focused on designing and fabricating CP-based wearable biosensors,thereby facilitating future research.Emphasizing the superior properties and benefits of CPs,this review aims to clarify their potential applicability within this field.Furthermore,the fundamentals and main components of CP-based wearable biosensors and their sensing mechanisms are discussed in detail.The recent advancements in CP nanostructures and hybridizations for improved sensing performance,along with recent innovations in next-generation wearable biosensors are highlighted.CPbased wearable biosensors have been—and will continue to be—an ideal platform for developing effective and user-friendly diagnostic technologies for human health monitoring.

Conjugated microporous polymers-scaffolded enzyme cascade systems with enhanced catalytic activity

Enhancing catalytic activity of multi-enzyme in vitro through substrate channeling effect is promis-ing yet challenging.Herein,conjugated microporous polymers(CMPs)-scaffolded integrated en-zyme cascade systems(I-ECSs)are constructed through co-entrapping glucose oxidase(GOx)and horseradish peroxidase(HRP),in which hydrogen peroxide(H_(2)O_(2)) is the intermediate product.The interplay of low-resistance mass transfer pathway and appropriate pore wall-H_(2)O_(2) interactions facilitates the directed transfer of H_(2)O_(2),resulting in 2.4-fold and 5.0-fold elevation in catalytic activ-ity compared to free ECSs and separated ECSs,respectively.The substrate channeling effect could be regulated by altering the mass ratio of GOx to HRP.Besides,I-ECSs demonstrate excellent stabili-ties in harsh environments and multiple recycling.

Effect of electron-electron interaction on polarization process of exciton and biexciton in conjugated polymer

By using one-dimensional tight-binding model modified to include electron-electric field interaction and electron-electron interaction,we theoretically explore the polarization process of exciton and biexciton in cis-polyacetylene.The dynamical simulation is performed by adopting the non-adiabatic evolution approach.The results show that under the effect of moderate electric field,when the strength of electron-electron interaction is weak,the singlet exciton is stable but its polarization presents obvious oscillation.With the enhancement of interaction,it is dissociated into polaron pairs,the spin-flip of which can be observed through modulating the interaction strength.For the triplet exciton,the strong electron-electron interaction restrains its normal polarization,but it is still stable.In the case of biexciton,the strong electron-electron interaction not only dissociate it,but also flip its charge distribution.The yield of the possible states formed after the dissociation of exciton and biexciton is also calculated.

Co and postseismic fault slip models of the 2022 M_(W)6.7 Menyuan earthquake reveal conjugated faulting tectonics at the central section of the Lenglongling fault

The 2022 M_(W)6.7 Menyuan earthquake ruptured the western end of the Tianzhu seismic gap,providing an opportunity to study the regional seismogenic characteristics and seismic hazards.Here we use interferometric synthetic aperture radar(InSAR)and seismic data to study the mainshock rupture,early afterslip and the second largest aftershock of the 2022 Menyuan earthquake sequences.Our modeling results show that the mainshock ruptured the Lenglongling fault and the Tuolaishan fault with a maximum slip of~3 m.Rapid postseismic transient deformation occurred at the center of the Lenglongling fault.Our afterslip modeling reveals that the majority of afterslip occurred in the deeper part of the Lenglongling fault.A high-angle conjugated faulting event is found at the middle section of the Lenglongling fault.We use the stress inversion to investigate the possible triggering mechanism of the conjugated rupture event.The results indicate the maximum principal stress direction is in~222°,forming a~22°angle between the conjugated fault of second largest aftershock and the mainshock.The calculated normal stress changes indicate the region is within a pull-apart stress field,which favors such a conjugated rupturing event.Our study will help understand the rupture behavior of such kind of conjugated fault in other regions.

Gas‐phase fluorination of conjugated microporous polymer microspheres for effective interfacial stabilization in lithium metal anodes

Lithium(Li)metal anodes have attracted extensive attention due to their ultrahigh theoretical capacity and low potential.However,the uneven deposition of Li near the unstable electrode/electrolyte interfaces leads to the growth of Li dendrites and the degradation of active electrodes.Herein,we directly fluorinate alkyne-containing conjugated microporous polymers(ACMPs)microspheres with fluorine gas(F_(2))to introduce a novel fluorinated interlayer as an interfacial stabilizer in lithium metal batteries.Using density functional theory methods,it is found that as-prepared fluorinated ACMP(FACMP)has abundant partially ionic C–F bonds.The C–F bonds with electrochemical lability yield remarkable lithiophilicity during cycling.The in situ reactions between the active C–F bonds and Li ions enable transfer of lithium fluoride microcrystals to the solid electrolyte interphase(SEI)layers,guaranteeing effective ionic distribution and smooth Li deposition.Consequently,Li metal electrodes with the fluorinated interlayers demonstrate excellent cycling performances in both half-batteries and full cells with a lithium bis(trifluoromethanesulfonyl)imide electrolyte as well as a nonfluorinated lithium bis(oxalate)borate electrolyte system.This strategy is highly significant in customizable SEI layers to stabilize electrode interfaces and ensure high utilization of Li metal anodes,especially in a nonfluorinated electrolyte.

Activating coordinative conjugated polymer via interfacial electron transfer for efficient CO_(2) electroreduction

With tunable local electronic environment,high mass density of MN4sites,and ease of preparation,metal-organic conjugated coordinative polymer(CCP) with inherent electronic conductivity provides a promising alternative to the well-known M-N-C electrocatalysts.Herein,the coordination reaction between Cu^(2+)and 1,2,4,5-tetraaminobenzene(TAB) was conducted on the surface of metallic Cu nanowires,forming a thin layer of CuN4-based CCP(Cu-TAB) on the Cu nanowire.More importantly,interfacial transfer of electrons from Cu core to the CuN4-based CCP nanoshell was observed within the resulting CuTAB@Cu,which was found to enrich the local electronic density of the CuN4sites.As such,the CuTAB@Cu demonstrates much improved affinity to the*COOH intermediate formed from the rate determining step;the energy barrier for C-C coupling,which is critical to convert CO_(2)into C2products,is also decreased.Accordingly,it delivers a current density of-9.1 mA cm^(-2)at a potential as high as 0.558 V(vs.RHE) in H-type cell and a Faraday efficiency of 46.4% for ethanol.This work emphasizes the profound role of interfacial interaction in tuning the local electronic structure and activating the CuN4-based CCPs for efficient electroreduction of CO_(2).

When insulating polymers meet conjugated polymers:the noncovalent bonding does matter

Insulating polymers are characterized by a predominantlyσ-covalent structure,which localize electrons in the atoms and exhibit dielectricity.Insulating polymers typically adopt a more linear and extended conformation,as the repeating units are connected by single covalent bonds,resulting in a relatively straight and extended chain structure.For most insulating polymers,the contour length(L_(c))is significantly larger than their persistence length(Lp)due to the rotation of C−C single bonds(Fig.1(a)).Consequently,this leads to a flexible,random-coil chain conformation.This structural feature contributes to the great mechanical durability and resistance to crack initiation during stretching or bending processes.In contrast,conjugated polymers possess aπ-conjugated molecular structure,allowing electron mobility along the main chain,called delocalization,which imparts semiconducting properties[1,2].The presence of rigid,alternating single and multiple bonds results in comparable Lc and Lp,thereby yielding a stiff or semi-flexible conformation(Fig.1(b))[3,4].As a consequence,most conjugated polymers are prone to fracture under low strain levels(<10%)[5−7].

Cobalt phthalocyanine-based conjugated polymer as efficient and exclusive electrocatalyst for CO_(2) reduction to ethanol

Electrocatalytic conversion of carbon dioxide to high value-added chemicals is a promising method for solving the energy crisis and global warming.Electrochemical active metal-containing conjugated polymers have been widely studied for heterogeneous carbon dioxide reduction.In the present contribution,we designed and synthesized a stable cobalt phthalocyanine-based conjugated polymer,named CoPPc-TFPPy-CP,and also explored its electro-catalytic application in carbon dioxide reduction to liquid products in an aqueous solution.In the catalyst,cobalt phthalocyanine acts as building blocks connected with 1,3,6,8-tetrakis(4-formyl phenyl)pyrenes via imine-linkages,leading to mesoporous formation polymers with the pore size centered at 4.1nm.And the central co-balt atoms shifted to a higher oxidation state after condensation.With these chemical and structural natures,the catalyst displayed a remarkable electrocatalytic CO_(2) reduction performance with an ethanol Faradaic efficiency of 43.25%at-1.0V vs RHE.While at the same time,the electrochemical reduction process catalyzed by cobalt phthalocyanine produced only carbon monoxide and hydrogen.To the best of our knowledge,CoPPc-TFPPy-CP is the first example among organic polymers and metal-organic frameworks that produces ethanol from CO_(2) with a remarkable selectivity.

Classification of Hallux Valgus Using Conjugated Deformity

Hallux valgus is a complex deformity of the forefoot. It is the result of multiple effects of endogenous and exogenous etiological factors with different degrees of influence. The degree of hallux valgus deformity was assessed by radiological values of hallux valgus (HVA) and intermetatarsal (IMA) angle. Thus, each hallux valgus deformity corresponds to a pair (HVA, IMA) of hallux valgus angle (HVA) and intermetatarsal angle (IMA) values in the plane of the deformity. The intensity of the point position vector S (HVA, IMA) in the deformation plane determined by the relation represents the absolute (conjugate) value of the power deformities. The goal of the article is to explain the advantage of the definition of the degree of hallux valgus deformity using its absolute (conjugate) value, and then to show that the degree of deformity defined in this way enables a better classification of deformities for all values of the HVA and IMA angles. Furthermore, in this article, applying the definition of conjugate deformity, analytical expressions were constructed for the assessment of the average value of deformity correction after operative treatment, as well as the error assessment of deformity correction after operative treatment. All obtained results were checked on a sample of 396 operatively treated feet.

Synthesis of CuAPTPP-TDI-TiO2 Conjugated Microspheres and its Photocatalytic Activity

The metal complex 5-（4-aminophenyl）-10,15,20-triphenylporphyrin copper （CuAPTPP） was covalently linked on the surface of TiO2 microspheres by using toluene disocyanate （TDI） as a bridging bond unit. The hydroxyl group （-OH） of TiO2 microspheres surface and the amino group （-NH2） of CuAPTPP reacted respectively with the active -NCO groups of TDI to form a surface conjugated microsphere CuAPTPP-TDI-TiO2 that was confirmed by FT-IR spectra. The CuAPTPP-TDI-TiO2 microspheres were characterized with UV-visible, elemental analysis, XRD, SEM, and UV-Vis diffuse reflectance spectra. The effect of amounts of linked TDI on the performance of photocatalytic microspheres was discussed, and the optimal molar ratio of TDI：TiO2 was established. The photocatalytic activity of CuAPTPP- TDI-TiO2 was evaluated using the photocatalytic degradation of methylene blue （MB） under visible-light irradiation. The results showed that, TDI, as a bond unit, was used to form a steady chemical brigdging bond linking CuAPTPP and the surface of TiO2 microspheres, and the prepared catalyst exhibited higher photocatalytic activity under visible-light irradiation for MB degradation. The degradation rate of 20 mg/L MB could reach 98.7% under Xe- lamp （150 W） irradiation in 120 rain. The degradation of MB followed the first-order reaction model under visible light irradiation, and the rate constant of 5.1× 10^-2 min-1 and the half- life of 11.3 min were achieved. And the new photocatalyst can be recycled for 4 times, remaining 90.0% MB degradation rate.

Preparation of Conjugated Linoleic Acid of High Purity and Its Apparent Kinetic Characteristics During Formation

Conjugated linoleic acid (CLA) is a fatty acid with physiological activities and potential application prospect. This paper focuses on the method of synthesis of conjugated linoleic acid of high purity and the process line and conditions for its purification that can be used in large scale production. CLA of more than 95% purity was prepared by means of urea adduct purification and conjugation using safflower oil as material. The total recovery of the product adds up to more than 48%. The reactive kinetics about linoleic acid from sunflower oil converted into CLA was investigated, and its apparent kinetic model was also established, which can be used as a base for industrial designs.

Relationship between ATPase activity and conjugated polyamines in mito-chondrial membrane from wheat seedling roots under osmotic stress

The effects of osmotic stress on the ATPase activity, the contents of —SH group and conjugated polyamines in mitochondrial membrane from wheat seedling [Triticum aestivum L. cv. Yumai No.18(drought-tolerant) and cv. Yumai No.9(drought-sensitive)] roots were investigated. The results showed that ATPase activity and —SH group content decreased with polyethylene glycol(PEG) 6000(-0.55 MPa) treatment for 7 d, in concert with the decrease of the ratio of noncovalently conjugated spermidine(NCC-Spd)/noncovalently conjugated putrescine(NCC-Put) and increase of the covalently conjugated putrescine(CC-Put). Osmotic stress injury to Yangmai No.9 seedlings was alleviated greatly with 1 mmol/L exogenous spermidine(Spd), in concert with marked increases of the ratio of NCC-Spd/NCC-Put, —SH group contents and ATPase activity in mitochondrial membrane. Under osmotic stress, the concomitant treatment of Yumai No.18 seedlings with methylglyoxyl bis(guanylhydrazone) (MGBG), an inhibitor of S-adenosyl methionine decarboxylase(SAMDC), and phenanthrolin (o-Phen), an inhibitor of transglutaminase(TGase), caused a significant decrease of the ratio of NCC-Spd / NCC-Put, CC-Put contents, respectively, in concert with the marked decreases of ATPase activity, —SH group content and its tolerance to osmotic stress. All the results above suggested that osmotic stress tolerance of wheat seedlings was associated with the ATPase activity, the contents of —SH group, NCC-Spd and CC-Put in mitochondrial membrane.

Preparation of Conjugated Linoleic Acid and Identification of Its Isomers

Conjugated linoleic acid (CLA) is a kind of fatty acid with physiological activities and potential application prospect. A synthesis method of conjugated linoleic acid and a purification technology were studied. CLA was prepared and purified by urea-complexation and conjugation using safflower oil as raw material. The purity of CLA and total recovery of the product was more than 95% and 48%, respectively. The main isomers produced in alkali-catalyzed conjugation were identified by gas chromatography (GC) linked to mass spectrometry (MS) and Fourier transform infrared spectroscopy (FTIR). The total amount of the two main isomers (9cis, 11trons-and 10trans, 12cis-CLA) determined by GC was more than 90% of the product.

High-Performance Na-Ion Storage of S-Doped Porous Carbon Derived from Conjugated Microporous Polymers

Na-ion batteries(NIBs)have attracted considerable attention in recent years owing to the high abundance and low cost of Na.It is well known that S doping can improve the electrochemical performance of carbon materials for NIBs.However,the current methods for S doping in carbons normally involve toxic precursors or rigorous conditions.In this work,we report a creative and facile strategy for preparing S-doped porous carbons(SCs)via the pyrolysis of conjugated microporous polymers(CMPs).Briefly,thiophene-based CMPs served as the precursors and doping sources simultaneously.Simple direct carbonization of CMPs produced S-doped carbon materials with highly porous structures.When used as an anode for NIBs,the SCs exhibited a high reversible capacity of 440 mAh g?1 at 50 mA g?1 after 100 cycles,superior rate capability,and excellent cycling stability(297 mAh g?1 after 1000 cycles at 500 mA g?1),outperforming most S-doped carbon materials reported thus far.The excellent performance of the SCs is attributed to the expanded lattice distance after S doping.Furthermore,we employed ex situ X-ray photoelectron spectroscopy to investigate the electrochemical reaction mechanism of the SCs during sodiation-desodiation,which can highlight the role of doped S for Na-ion storage.

Effect of cis-9,trans-11-conjugated linoleic acid on cell cycle of gastric adenocarcinoma cell line(SGC-7901)

AIM: To determine the effect of cis -9, trans -11-conjugated linoleic acid (c9, t11-CLA) on the cell cycle of gastric cancer cells (SGC-7901) and its possible mechanism in inhibition cancer growth. METHODS: Using cell culture and immunocytochemical techniques, we examined the cell growth, DNA synthesis, expression of PCNA, cyclin A, B(1), D(1), p16(ink4a) and p21(cip/waf1) of SGC-7901 cells which were treated with various c9, t11-CLA concentrations (25, 50, 100 and 200 micromol.L(-1))of c 9, t 11-CLA for 24 and 48h, with a negative control (0.1% ethane). RESULTS: The cell growth and DNA synthesis of SGC-7901 cells were inhibited by c9, t11-CLA.SGC-7901 cells. Eight day after treatment with various concentrations of c9, t11-CLA mentioned above, the inhibition rates were 5.92%, 20.15%, 75.61% and 82.44%, respectively and inhibitory effect of c9, t11-CLA on DNA synthesis (except for 25 micromol.L, 24h) showed significantly less (3)H-TdR incorporation than that in the negative controls (P【0.05 and P【0.01). Immunocytochemical staining demonstrated that SGC-7901 cells preincubated in media supplemented with different c9, t11-CLA concentrations at various times significantly decreased the expressions of PCNA (the expression rates were 7.2-3.0%, 24h and 9.1-0.9% at 48h, respectively), Cyclin A (11.0-2.3%, 24h and 8.5-0.5%,48h), B(1) (4.8-1.8% at 24h and 5.5-0.6% at 48h)and D(1) (3.6-1.4% at 24h and 3.7%-0 at 48h) as compared with those in the negative controls(the expressions of PCNA, Cyclin A, B(1) and D(1) were 6.5% at 24h and 9.0% at 48h, 4.2% at 24h and 5.1% at 48h, 9.5% at 24h and 6.0% at 48h,respectively)(P【0.01), whereas the expressions of P16(ink4a) and P21(cip/waf1), cyclin-dependent kinases inhibitors(CDKI), were increased. CONCLUSION: The cell growth and proliferation of SGC-7901 cell is inhibited by c9, t11-CLA via blocking the cell cycle, with reduced expressions of cyclin A,B(1) and D(1) and enhanced expressions of CDKI(P16(ink4a) and p21(cip/waf1)).

Effect of Technetium-99 Conjugated with Methylene Diphosphonate on IgM-RF,IgG-RF and IgA-RF

To explore the effect of technetium-99 conjugated with methylene diphosphonate ( 99 Tc-MDP) on IgM-RF, IgG-RF and IgA-RF (RFs), 47 cases were selected for study, including 33 patients with rheumatoid arthritis (RA) and 15 patients with joint pain/arthritis. After 99 Tc-MDP for drips model being given to the patients by intravenous drip 0.2 g daily for 5 days, the injection A and B models of 99 Tc-MDP were used to the patients by intravenous injection one set daily for 10 days, that was one course of treatment. The next course started after 10 days. Each case used it from 2 to 4 courses of treatment. The RFs in serum were determined by the method of enzyme-linked immunoabsorption assay (ELISA) before and after 2 and 4 courses of treatment. In the patients with RA, the concentrations of IgM-RF were 296.2±108.4 IU/ml, 189.5±92.3 IU/ml and 107.8±72.5 IU/ml; the concentrations of IgG-RF were 325.6±126.2 IU/ml, 209.7±98.2 IU/ml and 160.2±80.8 IU/ml; the concentrations of IgA-RF were 330.4±136.3 IU/ml, 210.7±89.2 IU/ml and 148.8±72.2 IU/ml before and after 2 and 4 courses of treatment, respectively. The concentrations of the above RFs were significantly lower after 2 and 4 courses than those before treatment ( P <0.05 and P <0.01). There was no significant difference in RFs concentrations in the patients with joint pain/arthritis before and after use of 99 Tc-MDP. In the patients with positive RFs before treatment, the RFs concentrations were decreased significantly after 2 and 4 courses of treatment ( P <0.05 and P <0.01). There was no obvious change of RFs concentrations in the patients with negative RFs after treatment of 99 Tc-MDP. It was concluded that 99 Tc-MDP could obviously reduce the abnormally high concentrations of RFs, but not influence the normal RFs, which indicated that 99 Tc-MDP has an important effect on controlling the activities of RA.

Molecular Design of Conjugated Small Molecule Nanoparticles for Synergistically Enhanced PTT/PDT

Simultaneous photothermal therapy(PTT)and photodynamic therapy(PDT)is beneficial for enhanced cancer therapy due to the synergistic effect.Conventional materials developed for synergistic PTT/PDT are generally multicomponent agents that need complicated preparation procedures and be activated by multiple laser sources.The emerging monocomponent diketopyrrolopyrrole(DPP)-based conjugated small molecular agents enable dual PTT/PDT under a single laser irradiation,but suffer from low singlet oxygen quantum yield,which severely restricts the therapeutic efficacy.Herein,we report acceptor-oriented molecular design of a donor-acceptor-donor(D-A-D)conjugated small molecule(IID-ThTPA)-based phototheranostic agent,with isoindigo(IID)as selective acceptor and triphenylamine(TPA)as donor.The strong D-A strength and narrow singlet-triplet energy gap endow IID-ThTPA nanoparticles(IID-ThTPA NPs)high mass extinction coefficient(18.2 L g^-1 cm^-1),competitive photothermal conversion efficiency(35.4%),and a dramatically enhanced singlet oxygen quantum yield(84.0%)comparing with previously reported monocomponent PTT/PDT agents.Such a high PTT/PDT performance of IID-ThTPA NPs achieved superior tumor cooperative eradicating capability in vitro and in vivo.

Conjugated hyperbilirubinemia presenting in first fourteen days in term neonates

AIM To describe the etiology and characteristics of earlyonset conjugated hyperbilirubinemia(ECHB) presenting within 14 d of life in term neonates.METHODS Retrospective review was performed of term infants up to 28-d-old who presented with conjugated hyperbilirubinemia(CHB) at a tertiary center over a 5-year period from January 2010 to December 2014. CHB is defined as conjugated bilirubin(CB) fraction greater than 15% of total bilirubin and CB greater or equal to 25 μmol/L. ECHB is defined as CHB detected within 14 d of life. "Late-onset" CHB(LCHB) is detected at 15-28 d of life and served as the comparison group.RESULTS Total of 117 patients were recruited: 65 had ECHB, 52had LCHB. Neonates with ECHB were more likely to be clinically unwell(80.0% vs 42.3%, P < 0.001) and associated with non-hepatic causes(73.8% vs 44.2%, P = 0.001) compared to LCHB. Multifactorial liver injury(75.0%) and sepsis(17.3%) were the most common causes of ECHB in clinically unwell infants, majority(87.5%) had resolution of CHB with no progression to chronic liver disease. Inborn errors of metabolism were rare(5.8%) but associated with high mortality(100%) in our series. In the subgroup of clinically well infants(n = 13) with ECHB, biliary atresia(BA) was the most common diagnosis(61.5%), all presented initially with normal stools and decline in total bilirubin but with persistent CHB. CONCLUSION Secondary hepatic injury is the most common reason for ECHB. BA presents with ECHB in well infants without classical symptoms of pale stools and deep jaundice.

Synthesis and photocatalytic activity of TiO_2/conjugated polymer complex nanoparticles

A photocatalyst of nanometer TiO2/conjugated polymer complex was successfully synthesized and characterized by spectroscopic methods and photocatalytic experiments. The complex photocatalyst could be activated by absorbing both ultraviolet and visible light （λ = 190-800 nm）. Methylene blue （MB） could be degraded more efficiently on the complex photocatalyst than on the TiO2 under natural light. The conjugated polymer played a promoting role in the photocatalytic degradation of MB. The calcination temperature had an important effect in degradation of dye and could be summarized as 260℃ 〉 300 ℃ 〉 340 ℃ 〉 220 ℃ 〉 180 ℃.