Integrated assessment of yield,nitrogen use efficiency and ecosystem economic benefits of use of controlled-release and common urea in ratoon rice production

Controlled-release urea(CRU)is commonly used to improve the crop yield and nitrogen use efficiency(NUE).However,few studies have investigated the effects of CRU in the ratoon rice system.Ratoon rice is the practice of obtaining a second harvest from tillers originating from the stubble of the previously harvested main crop.In this study,a 2-year field experiment using a randomized complete block design was conducted to determine the effects of CRU on the yield,NUE,and economic benefits of ratoon rice,including the main crop,to provide a theoretical basis for fertilization of ratoon rice.The experiment included four treatments:(i)no N fertilizer(CK);(ii)traditional practice with 5 applications of urea applied at different crop growth stages by surface broadcasting(FFP);(iii)one-time basal application of CRU(BF1);and(iv)one-time basal application of CRU combined with common urea(BF2).The BF1 and BF2 treatments significantly increased the main crop yield by 17.47 and 15.99%in 2019,and by 17.91 and 16.44%in 2020,respectively,compared with FFP treatment.The BF2 treatment achieved similar yield of the ratoon crop to the FFP treatment,whereas the BF1 treatment significantly increased the yield of the ratoon crop by 14.81%in 2019 and 12.21%in 2020 compared with the FFP treatment.The BF1 and BF2 treatments significantly improved the 2-year apparent N recovery efficiency,agronomic NUE,and partial factor productivity of applied N by 11.47-16.66,27.31-44.49,and 9.23-15.60%,respectively,compared with FFP treatment.The BF1 and BF2 treatments reduced the chalky rice rate and chalkiness of main and ratoon crops relative to the FFP treatment.Furthermore,emergy analysis showed that the production efficiency of the BF treatments was higher than that of the FFP treatment.The BF treatments reduced labor input due to reduced fertilization times and improved the economic benefits of ratoon rice.Compared with the FFP treatment,the BF1 and BF2 treatments increased the net income by 14.21-16.87 and 23.76-25.96%,respectively.Overall,the one-time blending use of CRU and common urea should be encouraged to achieve high yield,high nitrogen use efficiency,and good quality of ratoon rice,which has low labor input and low apparent N loss.

Effects of mixed fertilizers formed by the compounding of two targeted controlled-release nitrogen fertilizers on yield,nitrogen use efficiency,and ammonia volatilization in double-cropping rice

One-time application of mixed fertilizer formed by the compounding of two controlled-release nitrogen fertilizers(CRUs)with targeted N supply during the periods from transplantation(TS)to panicle initiation(PI)and from PI to heading(HS)is expected to synchronize the double-peak N demand of rice.However,its effects on the yield and N use efficiency(NUE)of labor-intensive double-cropping rice were unknown.Two targeted CRU(CRU_(A)and CRU_(B))were compounded in five ratios(CRU_(A):CRU_(B)=10:0,7:3,5:5,3:7,and 0:10)to form five mixed fertilizers(BBFs):BBF1-5.A field experiment was performed to investigate the characteristics of N supply in early and late seasons under different BBFs and their effects on N uptake,yield,and ammonia volatilization(AV)loss from paddy fields of double-cropping rice.Conventional high-yield fertilization(CK,three split applications of urea)and zero-N treatments were established as controls.The N supply dropped significantly with the increased compound ratio of CRU_(B)during the period from TS to PI,but increased during the period from PI to HS.With the exception of the period from TS to PI in the late rice season,the N uptake of early and late rice maintained close synchronicity with the N supply of BBFs during the double-peak periods.Excessive N supply(BBF1 and BBF2)in the late rice season during the period from TS to PI increased N loss by AV.The effect of BBF on grain yield increase varied widely between seasons,irrespective of year.Among the BBFs,the BBF2 treatment of early rice not only stabilized the spikelets per panicle but also ensured a high number of effective panicles by promoting N uptake during the period from TS to PI and a high grain-filling percentage by appropriately reducing the N supply at the later PI stage,resulting in the highest rice yield.While stabilizing the effective panicle number,the BBF4 treatment of late rice increased the number of spikelets per panicle by promoting N uptake during the period from PI to HS,resulting in the highest rice yield.The two-year average yield and apparent N recovery efficiency of the BBF2 treatment during the early rice season were 9.6 t ha 1 and 45.3%,while those of late rice in BBF4 were 9.6 t ha 1 and 43.0%,respectively.The yield and NUE indexes of BBF2 in early rice and BBF4 in late rice showed no significant difference from those of CK.The AVs of BBF2 during the early rice season and of BBF4 during the late rice season were 50.0%and 76.8%lower,respectively,than those of CK.BBF2 and BBF4 could effectively replace conventional urea split fertilization in early and late rice seasons,ensuring rice yield and NUE and reducing AV loss in paddy fields.

Subsurface banding of blended controlled-release urea can optimize rice yields while minimizing yield-scaled greenhouse gas emissions

Controlled-release urea(CRU)is widely reported to supply crop nitrogen(N)demand with one basal application,thus effectively replacing split applications of urea without diminishing grain yield and N use efficiency(NUE).However,its use for replacement for high-yield split applications of urea(CK)for rice is untested.In addition,the degree to which greenhouse gas(GHG)emissions in rice systems are affected when CRU is substituted for CK remains unclear.During 2017 and 2018,we sampled plant growth and gas emissions in a rice paddy field treated with three CRU types(sulfur-coated urea[SCU],polymer-coated urea[PCU],and bulk blended CRU[BBU])applied via two methods(surface broadcasting on the soil and subsurface banding at 5 cm depth),with CK as a control.The three CRUs led to different soil NH_(4)^(+)-N dynamics,and the N supply pattern under BBU was more beneficial for rice seedling establishment than under SCU and PCU,resulting in grain yield and NUE comparable to those under CK.CRU type showed no significant effect on either CH_(4) emissions or N_(2)O emissions,and broadcast CRUs exhibited significantly higher total GHG emissions than CK.However,banded CRUs significantly reduced the total GHG emissions in comparison with broadcast CRUs,by 9.2%averaged across the two years.Reduced CH_(4) emissions,particularly during the period prior to the middle drainage,contributed largely to the GHG difference.With comparably high grain yield and low total GHG emissions,banded BBU showed a low yield-scaled GHG(GHG emissions divided by grain yield)comparable to that under CK in both years.Overall,our study suggested that N management synchronized with rice demand and contributing to a high NUE tended to minimize yield-scaled GHG.Broadcast CRU can hardly substitute for CK in terms of either grain yield or GHG emissions,but banded BBU is a promising N management strategy for sustaining rice production while minimizing environmental impacts.

Combining controlled-release urea and normal urea with appropriate nitrogen application rate to reduce wheat stem lodging risk and increase grain yield and yield stability

A mixture of controlled-release urea and normal urea(CRUNU)is an efficient nitrogen(N)fertilizer type,but little is known about its effects on stem lodging resistance,grain yield,and yield stability of wheat.In this study,a 4-year field experiment(from 2017 to 2021)was conducted to analyze the effects of N fertilizer types(CRUNU and normal urea(NU))and application rates(low level(L),135 kg ha^(–1);medium level(M),180 kg ha^(–1);high level(H),225 kg ha^(–1))on population lodging resistance,basal internode strength,lignin content and synthetase activity,stem lodging resistance,grain yield,and yield stability of wheat.Our results showed that the two N fertilizer types had the highest lodging rate under high N application rates,and the M-CRUNU treatment showed the lowest lodging rate.Compared with NU,CRUNU improved the wheat population lodging resistance under the three N application rates,mainly related to improving wheat population characteristics and breaking the strength of the second basal internode.Correlation analysis showed that the breaking strength of the second basal internode was related to the physical characteristics,chemical components,and micro-structure of the internode.Compared with NU,CRUNU significantly increased wheat grain yield by 4.47,14.62,and 3.12%under low,medium,and high N application rates,respectively.In addition,CRUNU showed no significant difference in grain yield under medium and high N application rates,but it presented the highest yield stability under the medium N application rate.In summary,CRUNU,combined with the medium N application rate,is an efficient agronomic management strategy for wheat production.

Application of Silica Aerogel Carrier via Supercritical Drying for Fragrance Controlled-release

Silica aerogel with different hydrophilicities were prepared from tetramethoxysilane,Methymethoxysilane,tetramethoxysilane-propyltrimethoxysilane,or tetramethoxysilane-phenyltrimethoxysilane mixtures via supercritical drying process(labelled as TMOS-AG Me-TMOS-AG,Pr-TMOS-AG,or Ph-TMOS-AG,respectively).Three fragrances,including geraniol,ethyl vanillin,and menthol,were loaded to TMOS-AG.The thermal analysis confirmed all loading fragrances are stable until over 200℃.And among all fragrances,geraniol presented the maximum loading contents(L_(m)).Concentration dependences indicated the geraniol was mono layer absorbed.Py-GC/MS of geraniol in TMOS-AG under both N_(2)and mimic air atmosphere(90%N_(2)and 10%O_(2))confirmed that loaded geraniol could be thermally controlled-released beginning at 200℃.As N_(2)absorption confirmed,even absorption/desorption equilibrium constant(k)was determined mainly by hydrophilicity of silica aerogels,and the maximum loading contents(L_(m))were influenced more by the pore size.Due to mono layered absorption,bigger pores usually give less specific areas and less absorbing sites for geraniol,and then present lower L_(m).

Effects of Controlled-Release Nitrogen on Yield and Nitrogen Use Efficiency of Summer Maize

The field experiments were conducted in Anhui during 2016 to investigate the effects of controlled-release nitrogen （CRN） rates and mixture of controlled-re- lease nitrogen and conventional nitrogen （CN） on the yield and nitrogen efficiency of summer maize. Six treatments included CK （with no application of N）, CNIO0% splits （CN）, CRFIO0% （CRN1）, CRN60%＋CN40% （CRN2）, CRN85% （CRN3） and CRN70% （CRN4）. The results showed proper CRN increased yields and output val- ue. Compared with CN, CRN2 significantly increased by 13.74%, CRN1 increased by 4.84%, and CRN3 was equal to CN. CRN increased yield by grain number per spike of yield components. CRN2 had the highest apparent nitrogen fertilizer recov- ery efficiency and CRN1 was the second, which were significantly higher than CN. Nitrogen agronomic efficiency of CRN2 was significantly higher than CN. Nitrogen physiological efficiency of CRN2 was higher than CN. The partial productivity of CRN1 was higher than that with CN. And the effect of nitrogen fertilizer of CRN2 was the highest, which was increased 758 yuan/hm2. Considering yield, nitrogen use efficiency and economic benefit, applying the mixture of CRN and CN was the most beneficial treatment. CRN1 was the second treatment, and CRN3 didn＇t reduce yield.

Studies on the Mechanism of Single Basal Application of Controlled-Release Fertilizers for Increasing Yield of Rice (Oryza sativa L.)

This paper was to explore the mechanism of single basal application of controlled-release fertilizers for increasing yield of rice （Oryza sativa L.）. Pot trials and cylinder trials were carried out from 2002 to 2005 to study the influences of single basal application of 3 controlled-release fertilizers on the changes of soil available N, root development, senescence and lodging resistance at late growth stages. Results showed that at 30 days after fertilization, single basal application of controlled-release fertilizers coated with vegetal-substance （CRF1） and polymer materials （CRF3） increased soil available N to 12.0 and 147.9%, respectively, in comparison to split fertilization of rice-specific fertilizer （RSF1）. Treatments of the two CRFs obviously benefited the development of root system, resulting in greater rice root weights with extensive distribution and higher root activity. In addition, the two CRF treatments, in comparison to RSF1, enhanced chlorophyll consents of the flag leaves to 9.5 and 15.5%, and soluble protein up to 89.7 and 108.0% respectively. Application of the two CRFs also made the base of rice stems strong and large, declined the proportion of shoot and root, increased root depth index. Though relatively low K rate, single basal application of the CRF3 coated with NH4MgPO4 could also promote the development of root system, enhance root activity and some physiological functions of flag leaves. Based on these results, it was concluded that major mechanisms for increasing rice yield by single basal application of the CRFs should be attributed to grater soil available N supply, superior development of root systems, better nutrient absorption capacity, slower senescence and enhancement of lodging resistance at late stages.

Controlled-release fertilizer(CRF): A green fertilizer for controlling non-point contamination in agriculture

Fertilizers contribute greatly to high yields but also result in environmental non-point contamination, including the emission of greenhouse gas(N 2O) and eutrophication of water bodies. How to solve this problem has become a serious challenge, especially for China as its high ecological pressure. Controlled-release fertilizer(CRF) has been developed to minimize the contamination while keeping high yield and has become a green fertilizer for agriculture. Several CRFs made with special coating technology were used for testing the fertilizer effects in yield and environment through pot experiment and field trial. The result indicated that the CRFs had higher N use efficiency, thus reducing N loss through leaching and volatilization while keeping higher yields. Comparing with imported standard CRFs, the test on CRFs showed similar fertilizer effect but with much lower cost. CRFs application is becoming a new approach for minimizing non-point contamination in agriculture.

Shifts in soil bacterial communities induced by the controlled-release fertilizer coatings

Coated controlled-release fertilizers （CRFs） have been widely applied in agriculture due to their increased efficiency. However, the widespread and a lot of coated CRFs application may leave undesired coating residues in the soil due to their slow degradation. Limited information is available on the effects of substantial residual coatings on the soil bacterial community. By adding 0, 5, 10, 20, and 50 times quantities of residual coating from conventional application amount of resin and water-soluble coated CRFs, we studied the responses of soil properties and bacterial community composition to these two residual coatings in black soil. The results showed that the resin and water-soluble coatings did not essentially alter the properties of black soil or cause dramatic changes to bacterial diversity within the test concentration range. The residual resin and water-soluble coatings also did not distinctly alter the relative abundance of the top ten bacteria at phylum level. Heatmap results suggested that the treatments were basically clustered into two groups by concentration rather than types of coating material. Pearson correlation analysis showed that the Simpson＇s diversity index of the bacterial community was significantly correlated with microbial biomass carbon （MBC, r=0.394, P〈0.05）, and the richness index abundance-based coverage estimator （ACE） of the bacterial community was significantly correlated with microbial biomass nitrogen （MBN, t=0.407, P〈0.05）. Overall, results of this study suggested that substantial residual resin and water-soluble coatings with 0-50 times quantities of residual coating from conventional application amount of coated CRFs did not generate obviously negative impacts on the bacterial community in black soil.

Controlled-release Properties of Microencapsulated Disperse Dyes

Some disperse dyes were microencapsulated by means of in- situ polymerization. These microencapsulated disperse dyes was extracted respectively by ethanol under certain conditions. The controlled-release properties of disperse dyes through the shell of microcapsules were measured by spectrophotometer. According to the results, it was drawn that the type of disperse dyes, the auxiliaries contained in disperse dyes, the quantity of system controlling medium used and the core/shell ratio of microcapsules play important roles in controlling the release properties of microcapsules. The different controlled- release properties of microcapsules, which were prepared under given conditions, however, would in turn influence the performance of microcapsules in multiple-transfer printing.

Effects of different types of slow-and controlled-release fertilizers on rice yield

This experiment explored the effects of single application of seven types of slow-and controlled-release fertilizers on rice yield and various population characteristics.Based on a study of the nitrogen(N)release characteristics of these fertilizers,pot experiments were conducted in 2018 and 2019 with split fertilization(CK,urea applied split equally at basal and panicle initiation stages,respectively)as control,which assessed the effects on SPAD value,yield and yield components,dynamic changes of rice tillers and dry matter accumulation.The results showed that the N release characteristics of different types of slow-and controlled-release fertilizers were significantly different.Polymer-coated urea(PCU)showed a controlledrelease mode and provided sustained release throughout the whole growth stages.Sulfur-coated urea(SCU)exhibited a slow-release mode,providing insufficient release at the middle and late stages.Urease inhibitor urea(AHA)and ureaformaldehyde(UF)yielded a rapid-release mode,with an explosive N release at the early stage and no release at the middle and late stages.These results showed that PCU delayed the peak seedling stage.Compared with CK,dry matter accumulation and SPAD showed no significant differences,and due to the continuous release of N throughout the growth stages,rice yield,spikelets per panicle,seed setting rate,and 1000-grain weight were all increased.Owing to the lack of N supply at the late stage and the low number of spikelets,SCU led to a reduction of rice yield,which is nevertheless not statistically significant.AHA and UF were susceptible to environmental factors and had varying effects on rice yield.The results of this experiment indicated that given a fixed amount of N applied in a pot,the stronger the N supply capacity and the longer the effective duration time of the fertilizer,the higher the dry matter accumulation at the late growth stage,and the higher the rice yield.

Application of imidacloprid controlled-release granules to enhance the utilization rate and control wheat aphid on winter wheat

During winter wheat production, aphids need to be controlled with pesticides for the entire growth period. Controlled-release technology has been regarded as an alternative method for the improvement of pesticide efficiency. This study investigated two types of imidacloprid controlled-release granule (CR-GR): 2% imidacloprid CR-GR and 0.2% imidacloprid pesticide-fertilizer controlled-release granule (PF-CR-GR) when wheat was sown in winter. The release performance, utilization rate, terminal residues in edible parts, control effect on aphids, and achieved winter wheat yield were evaluated for both laboratory experiments and field application. Imidacloprid PF-CR-GR released more quickly in aqueous medium than CR-GR because of its good water solubility. After CR-GR treatments, the concentrations in wheat roots and soil were similar throughout the entire sampling period, and the concentrations in shoots were about 10–20% of those in roots. Imidacloprid was better absorbed when CR-GR was used as root treatment, compared with foliar treatment. Field application showed that imidacloprid CR-GR and PF-CR-GR controlled aphids throughout the entire growth period of winter wheat and improved the wheat yield. These findings identified application of imidacloprid CR-GR and PF-CR-GR on winter wheat as an effective way to enhance the pesticide utilization rate and ensure adequate yield. This paper provides a theoretical basis for the scientific use of pesticides and guides scientific pesticide application.

Physiological Basis of Photosynthetic Function and Senescence of Rice Leaves as Regulated by Controlled-Release Nitrogen Fertilizer

The physiological mechanism of photosynthetic function and senescence of rice leaves was studied by using early rice variety Baliangyou 100 and late rice variety Weiyou 46, treated with controlled-release nitrogen fertilizer （CRNF）, urea and no nitrogen fertilizer. CRNF showed obvious effects on delaying the senescence and prolonging photosynthetic function duration of rice leaves. Compared with urea, CRNF could significantly increase the chlorophyll content of functional leaves in both early and late rice varieties, and this difference between the treatments became larger as rice growth progressed; CRNF increased the activities of active oxygen scavenging enzymes super oxide dismutase （SOD） and peroxidase （POD）, and decreased the accumulation amount of malondialdehyde （MDA） in functional leaves during leaf aging; Photosynthetic rate of functional leaves in CRNF treatment was significantly higher than that in urea treatment. The result also indicated that CRNF could effectively regulate the contents of indole-3-acetic acid （IAA） and abscisic acid （ABA） in functional leaves; IAA content was higher and ABA content was lower in CRNF treatment than those in urea treatment. Therefore, application of CRNF could increase the rice yield significantly due to these physiological changes in the functional leaves.

Increase in yield and nitrogen use efficiency of double rice with long-term application of controlled-release urea

Controlled-release urea(CRU)has better characteristics than conventional urea for synchronizing nitrogen(N)release with plant uptake.Understanding the effects of CRU on crop yield and N use efficiency(NUE)has long been the key to evaluate the performance of CRU.A long-term experiment over five consecutive years was conducted in Changsha,Hunan Province,China,to investigate the effects of polyethylene-coated urea with a 90-d release period on the yield and NUE of double rice(early and late crops are grown in the same year),the amount of residual soil mineral N and the soil–plant N balance,as well as on the economic benefits.Four N fertilizer treatments including CK(no N fertilizer),U(conventional urea),CRU1(polyethylene-coated urea with equal N application rate to U)and CRU2(20%reduction in N application rate of CRU1)were established.The results indicated that CRU1 application increased the yield and NUE of double rice by 11.0 and 13.5%,respectively,compared with U.Higher yield and NUE of late rice were found than in early rice in CRU treatments.Compared with conventional U,the yield and NUE of early rice in the CRU1 treatment were increased by 6.0 and 10.2%,respectively,and those of late rice were increased by 15.4 and 13.8%,respectively.There was no significant difference between CRU1 and CRU2 in double rice yield.Furthermore,CRU treatments(including CRU1 and CRU2)had higher apparent residual Nmin rate(ARNR)and apparent N recovery rate(ANRR),but lower apparent N loss(NS)than the conventional U treatment.Concentrations of NH_(4)^(+)-N and NO_(3)^(-)-N were greater in the surface soil(0–20 cm)and lower in the deeper soil layer(40–60 cm)with CRU treatments than in the U treatment after harvest.Moreover,CRU application produced a greater economic benefit than conventional U application.In general,CRU outperformed U fertilizer in terms of rice yield,NUE,soil–plant N balance,economic benefit,and CRU2 provided greater comprehensive benefits than CRU1.It is suggested that CRU application is beneficial for solving N management challenges in the production of rice.

Use of seed gums from Tamarindus indica and Cassia fistula as controlled-release agents

Most seed gums have been widely used in oral and topical pharmaceutical formulations, cosmetics, and food products because of their hydrophilic properties. Gums from Tamariudus indica and Cassia fistula seeds were chemically modified by carboxymethylation to improve their functionalities. The objective of the present study was to characterize and evaluate crude and carboxymethylated gums from T. indica and C. fistula seeds to achieve the controlled-release of diclofenac sodium(DS) in matrix tablet form. Both crude and carboxymethylated gums were characterized by Fourier transform infrared spectroscopy, Xray diffraction, and scanning electron microscopy. The results revealed that the gums were successfully modified by carboxymethylation and that the modified gums were amorphous in structure and had better flow properties. The carboxymethylated gums from both plant seeds did not exhibit cytotoxicity at concentrations lower than 0.5 mg/ml. All gum samples used as polymeric controlled-release agents were formulated into DS matrix tablets. Hardness and thickness tests were conducted as in-process tests. Drug content estimation and in vitro drug release studies were carried out to evaluate the matrix tablets. Increasing the concentration of gums increased compression time and hardness while it reduced the thickness. Furthermore, the results fitted well with the Korsmeyer–Peppas model. Moreover, the DS tablets were found to release the drug by super case II transport(relaxation). In summary, the carboxymethylated gum from T. indica and C. fistula seeds is an excellent, naturally sourced gum with high physicochemical and functional qualities, and can potentially be used in pharmaceutical applications as a disintegrant, diluent, and drug release-controlling agent.

Controlled-Release Analysis of Potassium Permanganate Using PMMA Matrix

Excess amount of potassium permanganate has often been used in-situ for chemical oxidation of contaminated sites. The consequences are not limited to secondary contamination and cost but also inefficient remediation. Encapsulation of permanganate using PMMA enables controlled dissolution of the oxidant and aids long-term processes. This paper focuses on the oxidant release efficiency from polymer matrix and analysis of data using existing models for glassy polymers. The efficiency profile obtained using mass ratios of 2:1, 4:1, and 8:1 of PMMA to KMnO4 showed a decrease in the extent of release with increasing mass ratio with 79%, 55.35% and 33.59% respectively. Patches were noticed on the surfaces of PMMA after the release of KMnO4, these were attributed to crevices created by the non-fickian diffusion of the oxidant.

Preparation and characterization of controlled-release fertilizers coated with marine polysaccharide derivatives

Encapsulation of water-soluble nitrogen fertilizers by membranes can be used to control the release of nutrients to maximize the fertilization ef fect and reduce environmental pollution.In this research,we formulated a new double-coated controlled-release fertilizer(CRF)by using food-grade microcrystalline wax(MW)and marine polysaccharide derivatives(calcium alginate and chitosan-glutaraldehyde copolymer).The pellets of water-soluble nitrogen fertilizer were coated with the marine polysaccharide derivatives and MW.A convenient and eco-friendly method was used to prepare the CRF.Scanning electron microscopy(SEM)and Fourier transform infrared spectroscopy(FTIR)were used to characterize the morphology and composition of the products.The nitrogen-release properties were determined in water using UV-Vis spectrophotometry.The controlled-release properties of the fertilizer were improved dramatically after coating with MW and the marine polysaccharide derivatives.The results show that the double-coated CRFs can release nitrogen in a controlled manner,have excellent controlled-release features,and meet the European Standard for CRFs.

Effects of Controlled-Release Fertilizers and Their Application Methods on Germination and Seedling Growth of Dent and Sweet Corns

Effects of controlled-release fertilizers (CRFs) (C-AS, polyolefin coated ammonium sulfate, 50-day-type; Dd-LP, polyolefincoated urea with dicyandiamide, 40-day-type; C-ANP, polyolefin coated ammonium nitrate phosphate, 40-day-type; andC-DAP, polyolefin coated diammonium acid phosphate, 40-day-type), ammonium sulphate and no fertilizer control, andtheir application methods (spot, band, surface and mixed) on germination and seedling development of sweet corn (Zeamays L.var. saccharata Sturt.) and dent corn (Zea mays L.var. indentata Sturt.) were investigated in a greenhouse. Underco-situs application (band and spot) of CRFs, there were no obvious differences in the germination speed and rate for bothdent corn and sweet corn relative to control. Mortality rates of sweet corn seedlings under co-situs application were highin experiment 1, but were very low in experiment 2, because the environmental conditions were different in the twoexperiments. That is, under lower temperature and weaker sunlight, young seedlings easily die due to high soil nutrientconcentration and slow growth speed of corn. Shoot weight of both dent and sweet corn did not greatly decrease inexperiment 1. In experiment 2, there were no significant differences in shoot and root weight of both corns between co-situs and surface or mixed application methods. However, with spot and band application of ammonium sulfate, shoot androot weight were significantly reduced. Soil EC and pH were considerably affected by co-situs application, especially atthe fertilizer application site. For both dent and sweet corn, EC in the 0-3 cm soil was significantly higher under co-situsapplication and surface application than that under mixed application, whereas in the 3-6 cm soil depth the situation wasreversed. Compared with control, mixed application of CRFs decreased soil pH slightly (0-3 cm depth) or greatly (3-6 cmdepth).

The blend modification of EVA-150/starch and controlled-release of imazethapyr

The EVA-150 and starch were extruded by extruding press and the bio-degra- dation composite material was prepared to use as the controlled-release matrix of imazethapyr.The compatibility and crystallinity of EVA-150/starch blending were analyzed by SEM and DSC,and the controlled-released performance of imazethapyr in the carriers was also investigated by UV analysis.The results show that EVA-150/starch composite matrix has the obvious controlled-released function and the release rates of imazethapyr all exceed 50% in the environment of pH4,pH7,or pH9 after nine days.

Strip deep rotary tillage combined with controlled-release urea improves the grain yield and nitrogen use efficiency of maize in the North China Plain

Inappropriate tillage practices and nitrogen(N) management have become seriously limitations for maize(Zea mays L.) yield and N use efficiency(NUE) in the North China Plain(NCP). In the current study, we examined the effects of strip deep rotary tillage(ST) combined with controlled-release(CR) urea on maize yield and NUE, and determined the physiological factors involved in yield formation and N accumulation during a 2-year field experiment. Compared with conventional rotary tillage(RT) and no-tillage(NT), ST increased the soil water content and soil mineral N content(Nmin) in the 20–40 cm soil layer due to reduction by 10.5 and 13.7% in the soil bulk density in the 0–40 cm soil layer, respectively. Compared with the values obtained by common urea(CU) fertilization, CR increased the Nmin in the 0–40 cm soil layers by 12.4 and 10.3% at the silking and maturity stages, respectively. As a result, root length and total N accumulation were enhanced under ST and CR urea, which promoted greater leaf area and dry matter(particularly at post-silking), eventually increasing the1 000-kernel weight of maize. Thus, ST increased the maize yield by 8.3 and 11.0% compared with RT and NT, respectively, whereas CR urea increased maize yield by 8.9% above the values obtained under CU. Because of greater grain yield and N accumulation, ST combined with CR urea improved the NUE substantially. These results show that ST coupled with CR urea is an effective practice to further increase maize yield and NUE by improving soil properties and N supply, so it should be considered for sustainable maize production in the NCP(and other similar areas worldwide).