A modified constitutive model and hot compression instability behavior of Cu-Ag alloy

The hot compressive deformation behaviors of Cu-6wt.%Ag alloy were studied experimentally in the temperature range of 973.1123 K and the strain rate range of 0.01.10 s^-1.The stress increases and reaches the maximum value when the true strain is very small,and then the stress changes slowly and tends to be stable under the action of work hardening,dynamic recovery and recrystallization.The material parameters of the conventional Arrhenius constitutive model are only related to strain under different deformation conditions,and the prediction error is large,which cannot accurately characterize the hot deformation behavior of the alloy.To describe the hot deformation behavior of the alloy accurately,a modified constitutive model was established by considering the simultaneous influence of forming temperature,strain rate and strain.The results indicate that correlation coefficient(R)and the average absolute relative error(AARE)are 0.993 and 4.2%,respectively.The modified constitutive model can accurately describe the hot deformation behavior of Cu-6wt.%Ag alloy.

Processing map and hot working mechanisms of Cu-Ag alloy in hot compression process

For Gu-Ag alloy, an important parameter called workability in the forming process of materials can be evaluated by processing maps yielded from the stress-strain data generated by hot compression tests at temperatures of 700-850 °C and strain rates of 0.01-10 s-1. And at the true strain of 0.15, 0.35 and 0.55, respectively, the responses of strain-rate sensitivity, power dissipation efficiency and instability parameter to temperature and strain rate were studied. Instability maps and power dissipation maps were superimposed to form processing maps, which reveal the determinate regions where individual metallurgical processes occur and the limiting conditions of flow instability regions. Furthermore, the optimal processing parameters for bulk metal working are identified clearly by the processing maps.

Influence of Cerium Addition on Microstructure and Properties of Cu-Ag Alloy in Situ Filamentary Composites

The in situ filamentary composites based on the Cu-10Ag and Cu-10Ag-Ce alloys were prepared. The microstructure and properties of the composites were studied. The effects of Ce addition on the microstructure as cast, including refining Cu grains and the Ag filaments, increasing the proportion of (Cu+Ag) eutectic and decreasing the proportion of the Ag precipitate, were researched. The average size of the Ag filaments in the composites could be approached by a formula: d=C·exp(-0.228η), here C is a coefficient related to the size of the original grains and 1500 nm for Cu-10Ag and 800 nm for Cu-10Ag-Ce. A two-stage strain strengthening effect was found for the deformed composites, that is the dislocation strengthening at low strain stage and the ultra-fine Ag filaments or interface strengthening at the high strain stage. The intermediate heat treatment at lower temperature further refined the Ag filaments and therefore improved the properties. The high strengthening rate of Ce addition on Cu-10Ag alloy attributed the refining effect to Cu grains and Ag filaments. The typical properties of the heavy deformed composites with 1 IHT reached to UTS=1500 MPa with conductivity 62% IACS for the Cu-10Ag alloy and UTS=1550 MPa with conductivity 65% IACS for the Cu-10Ag-Ce alloy, respectively.

Texture evolution and recrystallization behaviors of Cu-Ag alloys subjected to cryogenic rolling

The texture evolution and mechanical properties of Cu-Ag alloys subjected to severe plastic deformation at cryogenic temperature（CT） were investigated and the sequent annealing behaviors were also studied.Compared with the sheets rolled at room temperature（RT） showing copper texture,the CT-rolled sheets exhibited brass texture which indicated that cross-slip was suppressed at CT,and both the ultimate tensile strength and yield strength of the sheets were increased.Due to the in-situ recrystallization mechanism,recrystallization textures in as-annealed CT-rolled sheets were randomly distributed,while the as-annealed RT-rolled sheets mainly contained cube texture.Microstructures of the rolled and annealed sheets were observed using optical microscopy and electronic back-scatter diffraction.The results show that the dynamic recovery was suppressed during CT-rolling and resulted in higher deformation energy storage.Therefore,the recrystallization of CT-rolled sheets could start at a lower temperature than that of RT-rolled sheet at the same reduction.

Influence of Microstructure Refinement on Strain Strengthening Effect of Cu-Ag Alloy in situ Filamentary Composites

The Cu-10Ag and Cu-10Ag-RE （RE=Ce, Y） alloys in situ filamentary composites were prepared. The relationships of the ultimate tensile strengths （UTS） and microstructure changes of the composites were studied. With increasing of the true strain η, the sizes of the Ag filaments in the composites reduce according to a negative exponential function of η:d=d0·exp（-0.228η）, and the UTS of the composites increase also according to a exponential function of η, σ Cu/Ag=σ 0（Cu）+[k Cu/Agd0 -1/2]exp（η/3）, here d0 is a coefficient related to the original size of Ag phase. The strain strengthening follows a two-stage strengthening effect. The strengthening mechanisms are related to changes of microstructure in the deformation process. At the low true strain stage, the strengthening is mainly caused by the working hardening controlled by dislocation increasing; at the high true strain stage, the strengthening is mainly caused by the super-fine Ag filaments and the large coherent interfaces between the Ag filaments and Cu matrix. The trace RE additions and the rapid solidification obviously refine scales of the Ag filament of the composites, and therefore obviously increased the strain strengthening rate. The microstructure refinement of the composites, especially the refinement of Ag filament, is the main reason of the high strain strengthening effect in Cu-Ag alloy in situ filamentary composites.

Influence of thermomechanical processing on the structure and properties of Cu-Ag alloy in situ composites

The influences of the thermomechanical processing, including the solidification conditions, the cold deformation and the intermediate annealing treatment, on the structure and properties of the Cu-10Ag alloy in situ composite were studied in this paper. The cast structure and the structural changes in the cold deformation and intermediate annealing process were observed. The properties including the ultimate tensile strength (UTS) and the electrical conductivity were determined. A two-stage strain strengthening effect for the Cu-10Ag alloy in situ filamentary composite was observed. The factors influencing the UTS and conductivity were discussed. The solidification conditions in the range of 10-1000 K/s cooling rates and the intermediate heat treatment showed obviously influence on the structure and properties on the Cu-10Ag alloy in situ filamentary composite. The typical properties of the Cu-Ag alloy in situ filamentary composites through thermomechanical processing were reported.

Preparation of FeCoNi medium entropy alloy from Fe^(3+)-Co^(2+)-Ni^(2+)solution system

In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.

Influence of introducing Zr,Ti,Nb and Ce elements on externally solidified crystals and mechanical properties of high-pressure die-casting Al–Si alloy

High pressure die casting(HPDC)AlSi10Mn Mg alloy castings are widely used in the automobile industry.Mg can optimize the mechanical properties of castings through heat treatment,while the release of thermal stress arouses the deformation of large integrated die-castings.Herein,the development of non-heat treatment Al alloys is becoming the hot topic.In addition,HPDC contains externally solidified crystals(ESCs),which are detrimental to the mechanical properties of castings.To achieve high strength and toughness of non-heat treatment die-casting Al-Si alloy,we used AlSi9Mn alloy as matrix with the introduction of Zr,Ti,Nb,and Ce.Their influences on ESCs and mechanical properties were systematically investigated through three-dimensional reconstruction and thermodynamic simulation.Our results reveal that the addition of Ti increased ESCs'size and porosity,while the introduction of Nb refined ESCs and decreased porosity.Meanwhile,large-sized Al_3(Zr,Ti)phases formed and degraded the mechanical properties.Subsequent introduction of Ce resulted in the poisoning effect and reduced mechanical properties.

Effects of the extrusion parameters on microstructure,texture and room temperature mechanical properties of extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy

Microstructure,texture,and mechanical properties of the extruded Mg-2.49Nd-1.82Gd-0.2Zn-0.2Zr alloy were investigated at different extrusion temperatures(260 and 320℃),extrusion ratios(10:1,15:1,and 30:1),and extrusion speeds(3 and 6 mm/s).The experimental results exhibited that the grain sizes after extrusion were much finer than that of the homogenized alloy,and the second phase showed streamline distribution along the extrusion direction(ED).With extrusion temperature increased from 260 to 320℃,the microstructure,texture,and mechanical properties of alloys changed slightly.The dynamic recrystallization(DRX)degree and grain sizes enhanced as the extrusion ratio increased from 10:1 to 30:1,and the strength gradually decreased but elongation(EL)increased.With the extrusion speed increased from 3 to 6 mm/s,the grain sizes and DRX degree increased significantly,and the samples presented the typical<2111>-<1123>rare-earth(RE)textures.The alloy extruded at 260℃ with extrusion ratio of 10:1 and extrusion speed of 3 mm/s showed the tensile yield strength(TYS)of 213 MPa and EL of 30.6%.After quantitatively analyzing the contribution of strengthening mechanisms,it was found that the grain boundary strengthening and dislocation strengthening played major roles among strengthening contributions.These results provide some guidelines for enlarging the industrial application of extruded Mg-RE alloy.

Study on the hydrogen absorption properties of a YGdTbDyHo rare-earth high-entropy alloy

This study investigated the microstructure and hydrogen absorption properties of a rare-earth high-entropy alloy(HEA),YGdTbDyHo.Results indicated that the YGdTbDyHo alloy had a microstructure of equiaxed grains,with the alloy elements distributed homogeneously.Upon hydrogen absorption,the phase structure of the HEA changed from a solid solution with an hexagonal-close-packed(HCP)structure to a high-entropy hydride with an faced-centered-cubic(FCC)structure without any secondary phase precipitated.The alloy demonstrated a maximum hydrogen storage capacity of 2.33 H/M(hydrogen atom/metal atom)at 723 K,with an enthalpy change(ΔH)of-141.09 kJ·mol^(-1)and an entropy change(ΔS)of-119.14 J·mol^(-1)·K^(-1).The kinetic mechanism of hydrogen absorption was hydride nucleation and growth,with an apparent activation energy(E_(a))of 20.90 kJ·mol^(-1).Without any activation,the YGdTbDyHo alloy could absorb hydrogen quickly(180 s at 923 K)with nearly no incubation period observed.The reason for the obtained value of 2.33 H/M was that the hydrogen atoms occupied both tetrahedral and octahedral interstices.These results demonstrate the potential application of HEAs as a high-capacity hydrogen storage material with a large H/M ratio,which can be used in the deuterium storage field.

Morphology evolution of two-phase Cu-Ag alloys under different conditions

Cu-Ag filamentary microcomposites with different Ag contents were prepared by cold drawing and intermediate heat treatments. The microstructure characterization and filamentary distribution were observed for two-phase alloys under different conditions. The effect of heavy drawing strain on the microstructure evolution of Cu-Ag alloys was investigated. The results show that the microstructure components consist of Cu dendrites, eutectic colonies and secondary Ag precipitates in the alloys containing 6%-24% （mass fraction） Ag. With the increase in Ag content, the eutectic colonies in the microstructure increase and gradually change into a continuous net-like distribution. The Cu dendrites, eutectic colonies and secondary Ag precipitates are elongated in an axial direction and developed into the composite filamentary structure during cold drawing deformation. The eutectic colonies tend to evolve into filamentary bundles. The filamentary diameters decrease with the increase in drawing strain degree for the two-phase alloys, in particular for the alloys with low Ag content. The reduction in filamentary diameters becomes slow once the drawing strain has exceeded a certain level.

Effect of Plastic Deformation on Microstructure and Properties of Cu-(1 wt%-6 wt%) Ag Alloy

In the present study,the Cu-(1 wt%-6 wt%)Ag alloys were prepared by melting,forging and wire drawing.The effects of plastic deformation on microstructure evolution and properties of the alloys were investigated.The results show that non-equilibrium eutectic colonies exist in the Cu-(3 wt%-6 wt%)Ag alloy and no eutectic colonies in the 1 wt%-2 wt%Ag containing alloys.These eutectic colonies are aligned along the drawing direction and refined with the increase of draw ratio.Attributed to the refinement of eutectic colonies,the Cu-Ag alloy exhibits higher strength with the increase of draw ratio.The Cu-6Ag alloy exhibits excellent comprehensive properties with a strength of 930 MPa and a conductivity of 82%IACS when the draw ratio reaches 5.7.

Ag含量对低合金化Cu-Ag合金拉拔线材组织和性能的影响

采用热型水平连铸技术制备Ag含量分别为0.6%、1.0%、2.0%和4.0%的Cu-Ag合金杆坯,并将d 16.0 mm杆坯拉拔加工成d 1.0 mm的线材,利用透射电镜分析其微细组织,并测试导电和力学性能。结果表明:拉拔线材由平行于拉拔方向的纤维晶组成,Cu-0.6Ag合金线纤维晶平均宽度约为340 nm;随着Ag含量增加,纤维晶尺寸减小,Cu-4.0Ag合金线纤维晶平均宽度为115 nm。纤维晶存在显著的〈111〉取向,纤维晶晶界主要为由位错塞积形成的小角度晶界,晶内存在大量位错,并发现少量的孪晶。随着Ag含量增加,Ag元素分布由局部富集转变为Ag相析出。Cu-0.6Ag和Cu-4.0Ag合金线材导电率随Ag含量的增大而减小,分别为91.2%IACS和79.5%IACS。Cu-0.6Ag和Cu-4.0Ag合金线材抗拉强度随Ag含量的增加而增大,分别为402.6 MPa和702.9 MPa。抗拉强度提高的主要原因是细晶强化和Ag相沉淀强化作用。

Loss in coherency and coarsening behavior of Cr precipitates in Cu-Ag-Cr alloy

The coarsening behavior of Cr precipitates in Cu-0.1Ag-0.5Cr alloy was investigated, and the effects of aging processes on the microstructure and properties were discussed. The results show that the radius for coherent/semi-coherent transition of the Cr precipitates is determined from TEM micrographs as 1545nm. The calculated value of critical radius for a particle begining to lose coherency is about 12.5nm. The coherent (r<15nm) precipitates are found to coarsen and become semi-coherent during the passage of low-angle boundaries during recovery. The passage of high-angle boundaries through semi-coherent precipitates during recrystallization occurs by migration of the particle, resulting in the precipitates maintaining semi-coherent with the new grain.

Influence of cerium on solidification, recrystallization and strengthening of Cu-Ag alloys

Cu-Ag-RE alloys with different Ce contents were prepared by vacuum melting, and microstructure evolution and mechanical properties of Cu-Ag-Ce alloys were investigated by optical microscopy, scanning electronic microscopy with electron back-scattered diffraction and tensile test. The results indicated that a columnar to equiaxed transition in cast Cu-Ag-RE alloys was observed due to Ce addition and area of the region with equiaxed grains enlarged with increasing Ce content. Cold-rolled Cu-Ag-RE alloys in annealed condition exhibited a partially or fully recrystallized grain structure depending on the concentration of Ce. The average grain size decreased and texture components changed with increasing Ce content. The main brass-type texture component changed to be copper-type as the Ce content increased from 0.05 wt.% to 1.0 wt.%. The Cu-Ag-RE alloy with 0.2 wt.% Ce showed maximum ultimate tensile strength, while the sample with 1.0 wt.% Ce showed a better comprehensive mechanical property.

Accelerated design of high-performance Mg-Mn-based magnesium alloys based on novel bayesian optimization

Magnesium(Mg),being the lightest structural metal,holds immense potential for widespread applications in various fields.The development of high-performance and cost-effective Mg alloys is crucial to further advancing their commercial utilization.With the rapid advancement of machine learning(ML)technology in recent years,the“data-driven''approach for alloy design has provided new perspectives and opportunities for enhancing the performance of Mg alloys.This paper introduces a novel regression-based Bayesian optimization active learning model(RBOALM)for the development of high-performance Mg-Mn-based wrought alloys.RBOALM employs active learning to automatically explore optimal alloy compositions and process parameters within predefined ranges,facilitating the discovery of superior alloy combinations.This model further integrates pre-established regression models as surrogate functions in Bayesian optimization,significantly enhancing the precision of the design process.Leveraging RBOALM,several new high-performance alloys have been successfully designed and prepared.Notably,after mechanical property testing of the designed alloys,the Mg-2.1Zn-2.0Mn-0.5Sn-0.1Ca alloy demonstrates exceptional mechanical properties,including an ultimate tensile strength of 406 MPa,a yield strength of 287 MPa,and a 23%fracture elongation.Furthermore,the Mg-2.7Mn-0.5Al-0.1Ca alloy exhibits an ultimate tensile strength of 211 MPa,coupled with a remarkable 41%fracture elongation.

Relationship between the unique microstructures and behaviors of high-entropy alloys

High-entropy alloys(HEAs),which were introduced as a pioneering concept in 2004,have captured the keen interest of nu-merous researchers.Entropy,in this context,can be perceived as representing disorder and randomness.By contrast,elemental composi-tions within alloy systems occupy specific structural sites in space,a concept referred to as structure.In accordance with Shannon entropy,structure is analogous to information.Generally,the arrangement of atoms within a material,termed its structure,plays a pivotal role in dictating its properties.In addition to expanding the array of options for alloy composites,HEAs afford ample opportunities for diverse structural designs.The profound influence of distinct structural features on the exceptional behaviors of alloys is underscored by numer-ous examples.These features include remarkably high fracture strength with excellent ductility,antiballistic capability,exceptional radi-ation resistance,and corrosion resistance.In this paper,we delve into various unique material structures and properties while elucidating the intricate relationship between structure and performance.

Influence of Metalloid Elements on the Magnetic Properties and Anisotropy of FeNi-based Amorphous Alloys

The magnetic properties and anisotropy of amor- phous(Fe_(80)Ni_(20))_(78)Si_xB_(22-x).alloys have been investigated systematically.The maximum permeability,coercive force and remanence have been determined for as-prepared and annealed samples,The results on the technical magnetic properties of this alloy system have been discussed and compared with Masumoto's.

Aging Behavior of Cu-Ag-Zr-Ce Alloy

Cu-Ag-Zr-Ce alloy has an excellent combination of high mechanical strength and high electrical conductivity. By means of a vacuum induction melting, Cu-Ag-Zr-Ce alloy was produced. The effects of aging processes and rare earths element cerium on microhardness and conductivity of Cu-Ag-Zr-Ce alloy were studied. By aging at 480 ℃ for 2 h, the alloy has an excellent combination of microhardness and conductivity, the microhardness and conductivity reach 132 HV and 80.24%IACS, respectively. The precipitates responsible for the age-hardening effect are f. c. c. Cu_5Zr, the fine and dispersed precipitates are fully coherent with the Cu matrix, and make the Cu-Ag-Zr-Ce alloy possesses higher hardness and conductivity. With the addition of trace rare earth element cerium, the strength is increased about 9～49 MPa, but the effect on conductivity is very little.

Microstructure and damping properties of LPSO phase dominant Mg-Ni-Y and Mg-Zn-Ni-Y alloys

This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period stacked ordered(LPSO)phase in the two alloys during heat treatment was the focus.The morphology of the as-cast Mg_(95.34)Ni_(2)Y_(2.66)presented a disordered network.After heat treatment at 773 K for 2 hours,the eutectic phase was integrated into the matrix,and the LPSO phase maintained the 18R structure.As Zn partially replaced Ni,the crystal grains became rounded in the cast alloy,and lamellar LPSO phases and more solid solution atoms were contained in the matrix after heat treatment of the Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloy.Both Zn and the heat treatment had a significant effect on damping.Obvious dislocation internal friction peaks and grain boundary internal friction peaks were found after temperature-dependent damping of the Mg_(95.34)Ni_(2)Y_(2.66)and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys.After heat treatment,the dislocation peak was significantly increased,especially in the alloy Mg_(95.34)Ni_(2)Y_(2).66.The annealed Mg_(95.34)Ni_(2)Y_(2.66)alloy with a rod-shaped LPSO phase exhibited a good damping performance of 0.14 atε=10^(−3),which was due to the difference between the second phase and solid solution atom content.These factors also affected the dynamic modulus of the alloy.The results of this study will help in further development of high-damping magnesium alloys.