A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 ...A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 （CuO/ZnO/Al2O3=3/6/1 by weight） component was prepared by a modified ＇two-step＇ co-precipitation method. The effects of ZrO2 on the performance of CuO-ZnO-Al2O3/HZSMo5 catalyst for dimethyl ether synthesis from CO2 hydrogenation were investigated. It was found that ZrO2 improved the properties of CuO-ZnO-Al2O3/HZSM-5 as a structural promoter.展开更多
Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ de...Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.展开更多
以直接水热合成和低硅沸石高温水蒸气脱铝两种方法制备了不同Si/Al摩尔比的HZSM-5载体,考察了Ga2O3/HZSM-5催化剂上丙烷脱氢制丙烯的反应性能.结合XRD,N2气吸附,27Al MAS NMR和NH3-TPD等表征方法,讨论了催化剂酸性质和孔性质与性能的关...以直接水热合成和低硅沸石高温水蒸气脱铝两种方法制备了不同Si/Al摩尔比的HZSM-5载体,考察了Ga2O3/HZSM-5催化剂上丙烷脱氢制丙烯的反应性能.结合XRD,N2气吸附,27Al MAS NMR和NH3-TPD等表征方法,讨论了催化剂酸性质和孔性质与性能的关系.实验结果表明,减少催化剂表面的中强酸量可以显著提高反应的稳定性和丙烯的选择性;水蒸气脱铝所增加的介孔有同样的效果,这可能是由于介孔的存在有利于丙烯的脱附和扩散而抑制了寡聚、环化等副反应的发生,减少了表面积炭的可能性.展开更多
文摘A series of composite catalysts were prepared by the wet mixing method, and the mass ratio of CuO-ZnO-Al2O3-ZrO2 component to HZSM-5 zeolite （molar ratio of SiO2 to Al2O3 being 25） was 2：1. The CuO-ZnO-Al2O3-ZrO2 （CuO/ZnO/Al2O3=3/6/1 by weight） component was prepared by a modified ＇two-step＇ co-precipitation method. The effects of ZrO2 on the performance of CuO-ZnO-Al2O3/HZSMo5 catalyst for dimethyl ether synthesis from CO2 hydrogenation were investigated. It was found that ZrO2 improved the properties of CuO-ZnO-Al2O3/HZSM-5 as a structural promoter.
基金support provided by the National Science and Technology Major Project of the Ministry of Science and Technology of China(2016ZX05012-002-005)Shandong Provincial Natural Science Foundation(Grant no.:ZR2021QE051)+1 种基金National Natural Science Foundation of China(Grant no.:52206291)the Fundamental Research Funds for the Central Universities(Grant no.:22CX06030A).
文摘Heavy oil is characterized by high viscosity.High viscosity makes it challenging to recover and transport.HZSM-5,MoO_(3)/HZSM-5,ZrO_(2)/HZSM-5 and MoO_(3)–ZrO_(2)/HZSM-5 catalysts were developed to promote in situ desulfurization and viscosity reduction of heavy oil.The physical and chemical properties of catalysts were characterized by XPS,XRD,TEM,NH3-TPD,etc.The effects of temperature,catalyst type and addition amount on viscosity and composition of heavy oil were evaluated.The results showed that the presence of MoO_(3)–ZrO_(2)/HZSM-5 nanoparticles during aquathermolysis could improve the oil quality by reducing the heavy fractions.It reduced viscosity by 82.56%after the reaction at 280℃ and catalyst addition of 1 wt%.The contents of resins and asphaltic in the oil samples were 5.69%lower than that in the crude oil.Sulfur content decreased from 1.45%to 1.03%.The concentration of H2S produced by the reaction was 2225 ppm.The contents of sulfur-containing functional groups sulfoxide and sulfone sulfur in the oil samples decreased by 19.92%after the catalytic reaction.The content of stable thiophene sulfur increased by 5.71%.This study provided a basis for understanding the mechanism of heavy oil desulfurization and viscosity reduction.
文摘以直接水热合成和低硅沸石高温水蒸气脱铝两种方法制备了不同Si/Al摩尔比的HZSM-5载体,考察了Ga2O3/HZSM-5催化剂上丙烷脱氢制丙烯的反应性能.结合XRD,N2气吸附,27Al MAS NMR和NH3-TPD等表征方法,讨论了催化剂酸性质和孔性质与性能的关系.实验结果表明,减少催化剂表面的中强酸量可以显著提高反应的稳定性和丙烯的选择性;水蒸气脱铝所增加的介孔有同样的效果,这可能是由于介孔的存在有利于丙烯的脱附和扩散而抑制了寡聚、环化等副反应的发生,减少了表面积炭的可能性.
