Triad-displaced ULAs configuration for non-circular sources with larger continuous virtual aperture and enhanced degrees of freedom

Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.

Trimming the Degrees of Freedom via a K^(+) Flux Rectifier for Safe and Long‑Life Potassium‑Ion Batteries

High degrees of freedom(DOF)for K^(+)movement in the electrolytes is desirable,because the resulting high ionic conductivity helps improve potassium-ion batteries,yet requiring support from highly free and flammable organic solvent molecules,seriously affecting battery safety.Here,we develop a K^(+)flux rectifier to trim K ion’s DOF to 1 and improve electrochemical properties.Although the ionic conductivity is compromised in the K^(+)flux rectifier,the overall electrochemical performance of PIBs was improved.An oxidation stability improvement from 4.0 to 5.9 V was realized,and the formation of dendrites and the dissolution of organic cathodes were inhibited.Consequently,the K||K cells continuously cycled over 3,700 h;K||Cu cells operated stably over 800 cycles with the Coulombic efficiency exceeding 99%;and K||graphite cells exhibited high-capacity retention over 74.7%after 1,500 cycles.Moreover,the 3,4,9,10-perylenetetracarboxylic diimide organic cathodes operated for more than 2,100 cycles and reached year-scale-cycling time.We fabricated a 2.18 Ah pouch cell with no significant capacity fading observed after 100 cycles.

Modelling rapid non-destructive test using light weight deflectometer on granular soils across different degrees of saturation

This study introduces an advanced finite element model for the light weight deflectometer(LWD),which integrates contact mechanics with fully coupled models.By simulating LWD tests on granular soils at various saturation levels,the model accurately reflects the dependence of the LWD modulus on dry density,water content,and effective stress.This model addresses and overcomes the limitations of previous finite element models for this specific problem.Simultaneously,this research presents the first experimentally validated fully coupled contact impact model.Furthermore,the research provides a comparative assessment of elastoplastic and nonlinear elastic models and contrasts an enriched node-tosegment method(developed in this study)with the more precise mortar technique for contact mechanics.These comparisons reveal unique advantages and challenges for each method.Moreover,the study underscores the importance of careful application of the LWD modulus,emphasising the need for sophisticated tools to interpret soil behaviour accurately.

Health effects of fruit juices and beverages with varying degrees of processing

The degree of processing is rarely considered an independent factor in the health effects of fruit juices and beverages(FJBs)consumption.In fact,the consumption of ultra-processed foods has been shown to pose health risks.In this study,we first integrated 4 systems used to classify the degree of food processing and then classified FJBs into three major categories,low(minimal),moderate and high.Second,we compared the differences in attitudes towards FJBs in dietary guidelines.Third,we integrated the results of existing epidemiological surveys,randomized controlled trials,and animal experiments to explore the health risks associated with consuming FJBs.Deepening the processing of FJBs has been found to lead to an increased risk of diseases.Dietary pattern,nutrients,addition agents and consumer preferences may be influential factors.Finally,we investigated whether there were any changes in the health benefits of 100%fruit juices produced by different processing methods.In conclusion,minimally/moderately processed 100%fruit juices provide more health benefits than highly processed fruit beverages.The results support the need to consider the extent of FJBs processing in future studies to adjust official nutritional recommendations for beverage consumption.

Degree of Freedom Analysis for Holographic MIMO Based on a Mutual-Coupling-Compliant Channel Model

Degree of freedom(DOF)is a key indicator for spatial multiplexing layers of a wireless channel.Traditionally,the channel of a multiple-input multiple-output(MIMO)half-wavelength dipole array has a DOF that equals the antenna number.However,recent studies suggest that the DOF could be less than the antenna number when strong mutual coupling is considered.We utilize a mutual-coupling-compliant channel model to investigate the DOF of the holographic MIMO(HMIMO)channel and give a upper bound of the DOF with strong mutual coupling.Our numerical simulations demonstrate that a dense array can support more DOF per unit aperture as compared with a half-wavelength MIMO system.

基于赋权偏差传递网络的6Dof-RUS并联机构随机误差分析

对于已经完成加工装配高精度并联机构,当出现使用精度无法满足设计要求时,需要对产生误差的源头进行追溯,只修复部分构件提高机构精度。以单点激光测距仪检测方法与六条由转动副(R)虎克铰链(U)球面副(S)构成单支链的6自由度并联机构(6Dof-RUS)随机误差模型之间的映射为研究内容。首先构建了6Dof-RUS并联机构赋权偏差传递网络,其次建立了相机坐标系中光斑与平面约束之间的映射方程,通过结构误差雅可比矩阵将结构参数误差映射为可观测的动平台位姿误差。最后进行了实验验证,实验结果表明,在有限次测量次数的情况下可快速对随机误差进行溯源,验证了所提方法的有效性与可靠性,对其他拓扑构型并联机构精度综合具有一定借鉴意义。

Experimental Study on Interaction Between Degrees of Freedom in a Wave Buoy

Increasing degrees of freedom(DOFs)is a useful way to raise the power capture efficiency of oscillating wave energy converters.Thus,this study proposes a buoy with three DOFs,which are surge,heave,and pitch.The hydrodynamic performance and power capture efficiency of the buoy is physically modeled.Amplitudes of unidirectional and coupled motions are compared to analyze the interaction effect between freedoms under conditions with and without power take-off damping.The capture width ratio and corresponding growth rates are also calculated.Results show that the buoy makes a periodic sinusoidal(or approximate)movement in every DOF.Coupling effect can cause an increase in the amplitude in one DOF and a decrease in the amplitudes of the others.This phenomenon shows that the kinematic energy of the buoy redistributes to all DOFs compared with the unidirectional conditions.Adding DOFs can improve the power absorption of the buoy in most cases,but the number of DOFs is not the more the better.

Modified Two-Degrees-of-Freedom Internal Model Control for Non-Square Systems with Multiple Time Delays

A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced to design the internal model controller,and a desired closed-loop transfer function is designed to eliminate the unrealizable factors of the derived controller. In addition,set-point tracking and load-disturbance rejection of each process are separately controlled by two controllers. The simulation results show that in addition to high decoupling performance and robustness,the proposed control method also effectively improves loaddisturbance rejection and simultaneously optimizes the input tracking performance and disturbance rejection performance by selecting the parameters of controllers. Furthermore,the higher tolerance of model mismatch is achieved in this paper.

System Identification Modeling of Ship Manoeuvring Motion in 4 Degrees of Freedom Based on Support Vector Machines

Based on support vector machines, three modeling methods, i.e., white-box modeling, grey-box modeling and black-box modeling of ship manoeuvring motion in 4 degrees of freedom are investigated. With the whole-ship mathematical model for ship manoeuvring motion, in which the hydrodynamic coefficients are obtained from roll planar motion mechanism test, some zigzag tests and turning circle manoeuvres are simulated. In the white-box modeling and grey-box modeling, the training data taken every 5 s from the simulated 20°/20° zigzag test are used, while in the black-box modeling, the training data taken every 5 s from the simulated 15°/15°, 20°/20° zigzag tests and 15°, 25° turning manoeuvres are used; and the trained support vector machines are used to predict the whole 20°/20° zigzag test. Comparisons between the simulated and predicted 20°/20° zigzag tests show good predictive ability of the proposed methods. Besides, all mathematical models obtained by the proposed modeling methods are used to predict the 10°/10° zigzag test and 35° turning circle manoeuvre, and the predicted results are compared with those of simulation tests to demonstrate the good generalization performance of the mathematical models. Finally, the proposed modeling methods are analyzed and compared with each other in aspects of application conditions, prediction accuracy and computation speed. The appropriate modeling method can be chosen according to the intended use of the mathematical models and the available data needed for system identification.

Type Synthesis of Two-Degrees-of-Freedom Rotational Parallel Mechanism with Two Continuous Rotational Axes

The two-rotational-degrees-of-freedom（2R） parallel mechanism（PM） with two continuous rotational axes（CRAs） has a simple kinematic model.It is therefore easy to implement trajectory planning,parameter calibration,and motion control,which allows for a variety of application prospects.However,no systematic analysis on structural constraints of the 2R-PM with two CRAs has been performed,and there are only a few types of 2R-PM with two CRAs.Thus,a theory regarding the type synthesis of the 2R-PM with two CRAs is systematically established.First,combining the theories of reciprocal screw and space geometry,the spatial arrangement relationships of the constraint forces applied to the moving platform by the branches are explored,which give the 2R-PM two CRAs.The different distributions of the constraint forces in each branch are also studied.On the basis of the obtained structural constraints of branches,and considering the geometric relationships of constraint forces in each branch,the appropriate kinematic chains are constructed.Through the reasonable configuration of branch kinematic chains corresponding to every structural constraint,a series of new 2R-PMs with two CRAs are finally obtained.

Bionic Quadruped Robot Dynamic Gait Control Strategy Based on Twenty Degrees of Freedom

Quadruped robot dynamic gaits have much more advantages than static gaits on speed and efficiency, however high speed and efficiency calls for more complex mechanical structure and complicated control algorithm. It becomes even more challenging when the robot has more degrees of freedom.As a result, most of the present researches focused on simple robot, while the researches on dynamic gaits for complex robot with more degrees of freedom are relatively limited. The paper is focusing on the dynamic gaits control for complex robot with twenty degrees of freedom for the first time. Firstly, we build a relatively complete 3 D model for quadruped robot based on spring loaded inverted pendulum(SLIP) model, analyze the inverse kinematics of the model, plan the trajectory of the swing foot and analyze the hydraulic drive. Secondly, we promote the control algorithm of one-legged to the quadruped robot based on the virtual leg and plan the state variables of pace gait and bound gait. Lastly, we realize the above two kinds of dynamic gaits in ADAMS-MATLAB joint simulation platform which testify the validity of above method.

The number of least degrees of freedom required for a polarization controller to transform any state of polarization to any other output covering the entire Poincar sphere

Using two typical types of polarization controller, this paper analyses theoretically and experimentally the fact that it is necessary to adjust at least three instead of two waveplates in order to transform any state of polarization to any other output covering the entire Poincar6 sphere. The experimental results are exactly in accordance with the theory discussed in this paper. It has corrected the conventional and inaccurate point of view that two waveplates of a polarization controller are adequate to complete the transformation of state of polarization.

Design and Analysis of a Magnetic Bearings with Three Degrees of Freedom

The current research of supporting and transmission system in flywheel energy storage system(FESS) focuses on the low consumption design. However, friction loss is a non-negligible factor in the high-speed but lightweight FESS energy and momentum storage with mechanical-type supporting system. In order to realize the support system without mechanical loss and to maximize the e ciency of the flywheel battery, a permanent magnet biased magnetic bearings(PMBMB) is applied to the FESS with the advantages of low loss, high critical speed, flexible controllability and compact structure. In this frame, the relevant research of three degrees of freedom(3-DOF) PMBMB for a new type FESS is carried out around the working principle, structural composition, coupling characteristics analysis, mathematical model, and structural design. In order to verify the performance of the 3-DOF PMBMB, the radial force mathematical model and the coupling determination equations of radial two DOF are calculated according to an equivalent magnetic circuit, and radial–axial coupling is analyzed through finite element analysis. Moreover, a control system is presented to solve the control problems in practical applications. The rotor returns to the balanced position in 0.05 s and maintains stable suspension. The displacement fluctuation is approximately 40 μm in the y direction and 30 μm in the x direction. Test results indicate that the dynamic rotor of the proposed flywheel energy storage system with PMBMB has excellent characteristics, such as good start-of-suspension performance and stable suspension characteristics. The proposed research provides the instruction to design and control a low loss support system for FESS.

新型3-DOF 1T2R并联机构的运动学分析与尺度优化

移动和转动混合运动的并联机构具有很高的研究和应用价值。基于转移混合输出运动的机构适用范围广,但该类机构的设计比较困难。为了研发和推广转移混合运动的1T2R并联机构,基于平面五杆机构和一条无约束支链,设计了一种一平移两转动(1T2R)的并联机构。首先,根据方位特征(POC)方程对机构进行了拓扑结构分析,并计算了该机构的自由度;然后,对该并联机构进行了运动学建模,推导了其位置正反解的解析表达式,并基于雅可比矩阵分析了机构的奇异性,利用三维离散搜索法计算了机构的工作空间,给出了机构在工作空间中的灵巧度分布情况;最后,利用粒子群算法(PSO)对机构的工作空间和灵巧度进行了双重优化,同时探讨了无约束支链的布置角φ对机构工作空间和灵巧度的影响。研究结果表明:所设计的1T2R并联机构结构简单,具有位置解析解;优化后的机构的工作空间和灵巧度分别提升了93.47%,203.42%;当无约束支链的驱动方向与平面(2P-3R)机构垂直布置时,能够获得更好的运动性能。该结果为3-DOF 1T2R机构的实际应用奠定了理论基础。

Behavior of Vortex-Induced Vibration of A Circular Cylinder Near A Deformable Wall with Two Degrees of Freedom in Steady Flow

The behavior of vortex-induced vibration of a two-degree-of-freedom cylinder near a deformable wall in steady flow is investigated experimentally. The typical phenomenon of the two-degree-of-freedom cylinder＇s VIV is discussed. The influences of initial gap between the cylinder and the wall on the dynamic responses of the cylinder are analyzed. The comparison is made about dynamic responses of the cylinder with one and two degrees of freedom. Experimental results show that the vibration of the cylinder near a deformable wall with a small value of initial gap-to-diameter ratios can generally be divided into two phases. The initial gap-to-diameter ratios have a noticeable influence on the occurrence of transverse vibration. The transverse maximum amplitude of the cylinder with two degrees of freedom is larger than that of the cylinder with one degree of freedom under the condition with the same values of other parameters. However, the vibration frequency of the cylinder for the two degrees of freedom case is smaller than that for the one degree of freedom case at the same value of Vr number

Design and Analysis of a Novel Compliant Mechanism with RPR Degrees of Freedom

A novel compliant mechanism with RPR degrees of freedom(DOF)is proposed where R and P represent rotation and translation DOFs,respectively.The proposed compliant mechanism is obtained from dimension synthesizing a 2-RPU-UPR rigid parallel mechanism with the method of optimization of motion/force transfer characteristic.R,P and U represent rotation,translation and universal pairs,respectively.Firstly,inverse kinematics and Jacobian matrix are analyzed for the dimensional synthesis.Then,output transmission indexes of branches in the parallel mechanism are given.Dimensional synthesis is completed based on the normalized design parameter.And optimization of flexure joints based on constrained energy is carried out.Afterwards,the novel compliant mechanism is obtained by direct replacing method.Mechanical model of the compliant mechanism including static stiffness and input stiffness is built based on the pseudo-rigid body modeling method and virtual work principle.Finally,FEA simulation by Ansys Workbench is carried out to verify DOF,effectiveness of the dimension synthesis,and compliant model.Optimization of motion/force transfer characteristic is first applied for the design of compliant mechanisms to suppress drift of rotation axis in the paper.

OPTIMAL CONTROL OF THE FLEXI-BLE LINK MANIPULATOR WITH CONTROLLABLE LOCAL DEGREES OF FREEDOM

Although flexible manipulators own many potential advantages, one of their major disadvantages is the deterioration of the end-effector accuracy due to the flexibility. Therefore, how to reduce vibration is a significant problem. Inspired by the observation on the motion behaviors of animals, a new idea of decreasing motion deflection of the flexible manipulator is suggested. The concept of controllable local degrees of freedom is proposed and analyzed. By way of optimizing local motion provided by the controllable local degrees of freedom, the end-effector deflection of the flexible manipulator can be effectively decreased through dynamic coupling. The corresponding optimal method for vibration control of the flexible manipulator is put forward. The kinematic simulation is carried ant on a three-link flexible manipulator The corresponding results verify the feasibility of this method.

Effects of Degrees of Motion Freedom on Free-Fall of A Sphere in Fluid

Free-fall of a sphere in fluid is investigated at a Galileo number of 204 by direct numerical simulations(DNS). We mainly focus on the effects of different degrees-of-freedom(DOFs) of the sphere motion during free-fall. The characteristics of free-fall are compared with those of flow past a fixed sphere. Additional numerical tests are conducted with constraints placed on the translational or rotational DOFs of the sphere motion to analyze different DOFs of sphere motion. The transverse motion contributes significantly to the characteristics of free-fall; it results in the retardation of the vortex shedding, leading to the decrease of the Strouhal number. In addition, the transversal sphere motion exhibits the tendency to promote the sphere rotation. On the contrary, the effects of the sphere rotation and vertical oscillations during free-fall are negligible.

一种6-DOF小行星着陆轨迹序列凸优化方法

针对6自由度的小行星动力着陆多约束轨迹优化问题,提出了一种基于序列凸优化的小行星着陆轨迹优化算法。首先采用多面体引力场模型计算小行星的引力场,其可用于描述任意形状的小行星引力场,且比质点群法和球谐函数展开法等方法计算精度更高。为了在凸约束下解决小行星着陆过程燃料消耗最优问题,通过对探测器动力学模型及其约束进行线性化和离散化,将原来的非凸连续时间优化问题转化为凸化的子问题,即二阶锥规划问题(SOCP);然后引入了虚拟控制项和信赖域,以增强算法的鲁棒性。通过在形状不规则小行星上的着陆模拟,验证了所提出算法的有效性,仿真结果满足各项约束条件,可实现高精度着陆和燃料消耗最优的目标。

Design and Development of a Competitive Low-Cost Robot Arm with Four Degrees of Freedom

The main focus of this work was to design, develop and implementation of competitively robot arm with en- hanced control and stumpy cost. The robot arm was designed with four degrees of freedom and talented to accomplish accurately simple tasks, such as light material handling, which will be integrated into a mobile platform that serves as an assistant for industrial workforce. The robot arm is equipped with several servo motors which do links between arms and perform arm movements. The servo motors include encoder so that no controller was implemented. To control the robot we used Labview, which performs inverse kinematic calculations and communicates the proper angles serially to a microcontroller that drives the servo motors with the capability of modifying position, speed and acceleration. Testing and validation of the robot arm was carried out and results shows that it work properly.