Radial mixing and segregation of granular bed bi-dispersed both in particle size and density within horizontal rotating drum

Taking simultaneous variations in both particle volume and density into account, the radial mixing and segregation of binary granular bed in a rotating drum half loaded were investigated by a 3D discrete element method. Then, based on the competition theory of condensation and percolation, radial segregation due to differences in particle volume and/or density was analyzed. The results show that if either percolation effect induced by volume difference or condensation effect induced by density difference dominates in the active layer of moving bed, separation will occur. Controlling the volume ratio or density ratio of the two types of particles can achieve an equilibrium state between percolation and condensation, and then homogenous mixture can be obtained. When the percolation balances with the condensation, the relationship between volume ratioand density ratiopresents nearly a power function. Scaling up a rotating drum will not affect the mixing degree of the granular bed so long as the volume ratio and density ratio are predefined.

Drumming the Future： Vietnamese Drumming as a Bridge Between Tradition and Popular Entertainment

The fascination of Vietnamese with drums and drumming reaches back into the pre-historic when bronze drums （Dong Son）, from the Red River Delta region of Vietnam＇s north, were prized trading commodities throughout the Asian world of that time. Now in the 21st century the Dong Son and other historically renowned drum types have become symbols for Vietnam＇s emergence into an international cultural and economic arena. This paper charts three Vietnamese international events that illustrate the emblematic use of traditional drumming as a nationalistic symbol of modern Vietnam： The Third Asian Indoor Games held in Hanoi in 2009 opened with a drumming spectacle using battle drums; the Jubilee celebrations of the Vietnamese Catholic Church in 2010, opened in the north in the Ha Nam province with an immense traditional drumming performance within its religious setting; the 2012 Hue International Arts Festival incorporated ＂Resounding the Vietnamese Spirit＂, a specific drums and percussion festival, with performances using Binh Dinh war drums, royal drums from Hue, Dong Son drums, and Tay Son battle drums. These displays of traditional drumming it is argued have popularised particular nationalistic styles of drumming amongst Vietnamese youth, extending from the use of drumming in lion dance performances to the emergence of small, youth drumming groups who perform in the streets of Hanoi and Ho Chi Minh City

Kinematics and Path Following Control of an Articulated Drum Roller

Automatic navigation of an articulated drum roller, which is an articulated steering type vehicle widely used in the construction industry, is highly expected for operation cost reduction and improvement of work effi- ciency. In order to achieve the path following control, considering that its steering system is articulated steering and two frames are articulated by an active revolute joint, a kinematic model and an error dynamic state-space equation of an articulated drum roller are proposed. Besides, a state- feedback control law based on Lyapunov stability theory is also designed, which can be proved to achieve the purpose of control by the analysis of stability. What＇s more, to evaluate the performance of the proposed method, simu- lation under the MATLAB/Simulink and experiments using positioning algorithm and errors correction at the uneven construction site are performed, with initial dis- placement error （-1.5 m）, heading error （-0.11 tad） and steering angle （-0.19 rad）. Finally, simulation and exper- imental results show that the errors and steering angle can decrease gradually, and converge to zero with time. Meanwhile, the control input is not saturated. An articu- lated drum roller can lock into a desired path with the proposed method in uneven fields.

Performance of rotating drum biofilter for volatile organic compound removal at high organic loading rates

Uneven distribution of volatile organic compounds （VOCs） and biomass, and excess biomass accumulation in some biofilters hinder the application of biofiltration technology. An innovative multilayer rotating drum biofilter （RDB） was developed to correct these problems. The RDB was operated at an empty bed contact time （EBCT） of 30 s and a rotational rate of 1.0 r/min. Diethyl ether was chosen as the model VOC. Performance of the RDB was evaluated at organic loading rates of 32,1, 64.2, 128, and 256 g ether/（m^3·h） （16.06 g ether/（m^3·h） ≈ 1.0 kg chemical oxygen demand （COD）/（m^3·d））. The EBCT and organic loading rates were recorded on the basis of the medium volume. Results show that the ether removal efficiency decreased with an increased VOC loading rate. Ether removal efficiencies exceeding 99% were achieved without biomass control even at a high VOC loading rate of 128 g ether/（m^3·h）. However, when the VOC loading rate was increased to 256 g ether/（m^3·h）, the average removal efficiency dropped to 43%. Nutrient limitation possibly contributed to the drop in ether removal efficiency. High biomass accumulation rate was also observed in the medium at the two higher ether loading rates, and removal of the excess biomass in the media was necessary to maintain stable performance. This work showed that the RDB is effective in the removal of diethyl ether from waste gas streams even at high organic loading rates. The results might help establish criteria for designing and operating RDBs.

Reliability modeling of hydraulic system of drum shearer machine

The hydraulic system plays an important role in supplying power and its transition to other working parts of a coal shearer machine. In this paper, the reliability of the hydraulic system of a drum shearer was analyzed. A case study was done in the Tabas Coal Mine in Iran for failure data collection. The results of the statistical analysis show that the time between failures （TBF） data of this system followed the 3-parameters Weibull distribution. There is about a 54% chance that the hydraulic system of the drum shearer will not fail for the first 50 h of operation. The developed model shows that the reliability of the hydraulic system reduces to a zero value after approximately 1 650 hours of operation. The failure rate of this system decreases when time increases. Therefore, corrective maintenance （run-to-t^ailure） was selected as the best maintenance strategy for it.

Fatigue behaviour of coke drum materials under thermal-mechanical cyclic loading

Coke drums are vertical pressure vessels used in the delayed coking process in petroleum refineries. Significant temperature variation during the delayed coking process causes damage in cracking. There were some studies on coke drums in the form of bulging and the fatigue life estimation for the coke drums, but most of them were based on strain-fatigue life curves at constant temperatures, which do not consider simultaneous cyclic temperature and mechanical loading conditions. In this study, a fatigue testing system is successfully devel- oped to allow performing thermal-mechanical fatigue （TMF） test similar to the coke drum loading condition. Two commonly used base and one clad materials of coke drums are then experimentally investigated. In addition, a comparative study between isothermal and TMF lives of these materials is conducted. The experimental findings lead to better understanding of the damage mechanisms occurring in coke drums and more accurate prediction of fatigue life of coke drum materials.

An inverse method for online stress monitoring and fatigue life analysis of boiler drums

A method based on solution of the inverse heat conduction problem was presented for online stress monitoring and fatigue life analysis of boiler drums. The mathematical model of the drum temperature distribution is based on the assumptions that the difference of temperature along the longitudinal axis of the boiler drum is negligible with changes only in the radial direction and the circumferential direction, and that the outer surface of drum is thermaUy insulated. Combining this model with the control-volume method provides temperatures at different points on a cross-section of the drum. With the temperature data, the stresses and the life expectancy of the boiler drum are derived according to the ASME code. Applying this method to the cold start-up process of a 300 MW boiler demonstrated the absence of errors caused by the boundary condition assumptions on the inner surface of the drum and testified that the method is an applicable technique for the online stress monitoring and fatigue life analysis of boiler drums.

Particle breakage of sand subjected to friction and collision in drum tests

This paper presents a laboratory experimental study on particle breakage of sand subjected to friction and collision,by a number of drum tests on granular materials(silica sand No.3 and ceramic balls)to investigate the characteristics of particle breakage and its effect on the characteristics of grain size distribution of sand.Particle breakage increased in up convexity with increasing duration of drum tests,but increased linearly with increasing number of balls.Particle breakage showed an increase,followed by a decrease while increasing the amount of sand.There may be existence of a characteristic amount of sand causing a maximum particle breakage.Friction tests caused much less particle breakage than collision tests did.Friction and collision resulted in different mechanisms of particle breakage,mainly by abrasion for friction and by splitting for collision.The fines content increased with increasing relative breakage.Particle breakage in the friction tests(abrasion)resulted in a sharper increase but with a smaller total amount of fines content in comparison with that in the collision tests(splitting).For the collision tests,the fines content showed a decrease followed by an increase as the amount of sand increased,whereas it increased in up convexity with increasing number of balls.The characteristic grain sizes D_(10) and D_(30) decreased in down convexity with increasing relative breakage,which could be described by a natural exponential function.However,the characteristic grain sizes D50 and D60 decreased linearly while increasing the relative breakage.In addition,the coefficients of uniformity and curvature of sand showed an increase followed by a decrease while increasing the relative breakage.

Factors affecting thin coal seam shearer drum coal-loading performance by a model test method

To solve the problem of a low coal-loading rate being exhibited by the drum shearer on Chinese thin coal seams,systematic tests and research were performed to study the pivotal factors’influences on drum coal-loading rate using a model test method.The effects of the drum hub diameter,cutting depth,vane helix angle,drum rotation speed and hauling speed on drum coal-loading rate were determined under circumstances of coal-loading with drum ejection and pushing modes,and reasons for these phenomena were analyzed.The results indicate that the influence of the drum cutting depth on the drum coal-loading rate is the most significant.The parameters of hub diameter,drum rotation speed and hauling speed can influence the drum coal-loading rate by cutting the coals’filling rate in the drum.The parameters of vane helix angle and drum rotation speed can influence drum coal-loading rates by influencing the ratio of cutting coals’tangential and axial speed in the drum.The coal-loading rate with drum ejection is clearly higher than that observed with drum pushing.Research in this study can provide support to design the drum structure and select drum operational parameters for a thin coal seam shearer.

Reliability and maintainability analysis of electrical system of drum shearers

The reliability and maintainability of electrical system of drum shearer at Parvade. 1 Coal Mine in central Iran was analyzed. The maintenance and failure data were collected during 19 months of shearer operation. According to trend and serial correlation tests, the data were independent and identically distributed （iid） and therefore the statistical techniques were used for modeling. The data analysis show that the time between failures （TBF） and time to repair （TTR） data obey the lognormal and Weibull 3 parameters distribution respectively. Reliability-based preventive maintenance time intervals for electrical system of the drum shearer were calculated with regard to reliability plot. The reliability-based maintenance intervals for 90%, 80%, 70% and 50% reliability level are respectively 9.91, 17.96, 27.56 and 56.1 h. Also the calculations show that time to repair （TTR） of this system varies in range 0.17-4 h with 1.002 h as mean time to repair （MTTR）. There is a 80% chance that the electrical system of shearer of Parvade. 1 mine repair will be accomplished within 1.45 h.

Effect of moving baffle on average velocity and mixing of binary particles in rotating drums

Adding a moving baffle to the drum is a new way to enhance the motion and mixing of particles in rotating drums.To obtain its influence on binary particles,horizontal rotating drums provided with a moving baffle were investigated by discrete element method(DEM).AtΩ=15 r/min,increasing the length of moving baffle can increase the fluctuation amplitude of average particle velocity.AtΩ=60 r/min,the influence of the moving baffle on the average velocity fluctuation tends to be more random.At both rotational speeds,the moving baffle causes the average particle velocity to fluctuate more sharply.The moving baffle can enhance particle mixing.AtΩ=15 r/min,the moving baffle with length ofδ=1/3 can best enhance particle mixing.However,atΩ=60 r/min,only the moving baffle with a specific length(δ=1/4)can enhance mixing.This basic research has a positive reference value for the application of the moving baffle in industry.

The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw

An analysis of the efficiency of the ginning of cotton fibers with two saw cylinders has been carried out. In comparison to a one-cylinder machine, the 2 cylinder approach can help to preserve the natural characteristics of cotton fiber and seeds. This technology allows economizing electricity and decreasing damage to fiber and also increases the productivity of the machine.

Study on Airflow Field of Condensing Zone in Compact Spinning System with Perforated Drum

Negative pressure plays a very important role in compact spinning system.To know airflow field and its distribution is helpful to look into the condensing principle of fiber bundle.Therefore,computational fluid dynamics(CFD)software was used to simulate airflow field in this paper.Airflow velocity distributions both in different fiber layers and under different negative pressures were discussed.The results indicate that airflow velocity in upper layer of the fiber bundle is greater than that in lower layer.Airflow velocities in both X and Y axis directions have a positive correlation with negative pressure.It can provide a theoretical base to make high quality compact yarns in productive practice.

Analysis on vertical steering vibration of drum shearer cutting part

The impact of the load on the shearer is mainly transmitted through cutting part.In this paper,in order to get the vertical steering vibration characteristics of the cutting part of the drum shearer,the working condition of coal mining machine is simplified.A simplified vertical steering model and the simplified vibration model of the whole cutting part of shearer are established.The vertical steering vibration process of the cutting unit is simplified into a single freedom and one forced vibration system under harmonic excitation.The dynamic response of the cutting part under sine excitation is obtained by using Matlab/Simulink for modeling and simulation.The influence of the support rigidity and damping of the high oil cylinder on the vertical steering vibration characteristics of the cutting part is analyzed.The results show that the damping of the cylinder can reduce the vibration of the system and the stability of the swing process of cutting the part is improved.

Drum instability of thinning spinning ultra thin-walled tubes with large diameter-to-thickness ratio

In order to explore drum instability problems of thinning spinning ultra thin-walled tubes with large diameter-to-hickness ratio, experiments of thinning spinning ultra thin-walled tubes with different clearances between the mandrel and the tube were carried out. The phenomena of drum instability were analyzed. Drum instability mechanism was studied. The important influence of the mandrel-locked ring on stable thinning spinning was found. Besides, two important parameters, namely drum ratio and drum stiffness, were proposed to characterize the drum instability of spinning ultra thin-walled tubes with large diameter-to-thickness ratio. What's more, numerical simulations were applied to explore the influences of different clearance ratios and diameter-to-thickness ratios on the drum instability. As a result, it is found that the mandrel-locked ring is the key to the stability and precision of spinning; drum ratio can reflect the degree of the deformation of the tubes; drum stiffness is a comprehensive index to measure the influences of the tube's own parameters on the spinning instability; both the clearance ratio and diameter-thickness ratio have significant influences on the drum ratio and drum stiffness.

DESIGN AND APPLICATION OF MODEL DZI LOG GRAPPLE DRIVEN BY AN ELECTRIC DRUM

This article introduces the history and development of log grapple in China.Ac-cording to the special conditions of Chinese forest areas,we have selected log grapple driven byelectric drum,and have analyzed and calculated its parameters theoretically.This is the first loggrapple driven by an electric drum made successfully in China.The Model DZ1 log grapple has alarge closing force,works safely and is suitable for the special forest working conditions inChina.

LEAD ISOTOPE STUDIES ON ANCIENT BRONZE DRUMS OF GUANGXI CHINA

A study has been reported on 208Pb/206Pb and 207Pb/206Pb ratio variations in ancient drums and Cu-., Pb- ores from Guangxi, China and can indicate that the Cu- and Pb- bearing ores for making the Beiliu and the Lingshan type drums were taken from Tongshiling of Beiliu County and its vicinity, that were not only ancient sites for smelting the copper ores, but possibly also for casting the bronze drums. Some of the Lengshuichong type drums have abnormal Pb isotopic ratios, which means that they were made of special ore sources, one of the possibilities is that the ore material or the drums were transported from South- East Asia to Guangxi Province, because they have been excavated there too.

SOME MECHANISMS OF DRUM BRAKE OSCILLATION AND SQUEAL

Drum brake squeal is usually due to the unstable oscillation excited by the dry friction between the drum and linings. In order to understand the mechanisms of drum brake squeal, a new drum brake dynamics model in closed form is presented for analyzing the modes and stability of drum brake vibration, so as to judge whether a squeal will happen or not. Then, a non contact experimental vibration analysis procedure based on nearfield acoustical holography technique is developed for measuring the operating deflection shape of drum. The measured ODS of drum is nearly the same as the unstable oscillation with the largest real component of eigenvalue among all the complex modes of brake drum.

A Simple Approach to Determine Noise Frequency of Boiler Drum Level

This paper proposed a simple approach to determine noise frequency of boiler drum level in order to improve control performance. Based on analysis of uncertainty of drum level, the redundant oscillation component of signal, noise is ascribed to the surface wave of drum water. According to the characteristic of surface wave, a new method was proposed to determine noise’s frequency band. By gradually removing the lowest frequency component of signal, the variance of remained component is calculated and observed. An apparent turning point was found and the corresponding critical frequcncy was determined. With this result a low-pass filter was designed to separate noise component. Finally validation is conducted by comparing the proposed method and conventional ones. Results show the accuracy and simpleness of the proposed method.

Analysis of transient temperature field in coke drums

One of the primary reasons leading to bulging and cracking in a coke drum is the severe temperature gradient due to cyclic temperature variation. Based on the twodimensional heat conduction theory, an analytical solution of the transient temperature field in the coke drum is obtained, which is different from the known FEM results. The length of the coke drum is considered finite. The dynamic boundary conditions caused by fluid uninterrupted rising in oiling and watering stages are simulated with the iteration method. Numerical results show that the present theoretical model can accurately describe basic features of the transient temperature field in the coke drum. Effects of the geometry of the coke drum and the rising velocity of quench water on the axial temperature gradient are also discussed.