In this study, whole-oil gas chromatographic fingerprint analyses were performed on oils from the Es3^3 reservoir in the Liubei area of the Nanpu Sag. The gas chromatographic peaks of cyclic and branched alkanes with ...In this study, whole-oil gas chromatographic fingerprint analyses were performed on oils from the Es3^3 reservoir in the Liubei area of the Nanpu Sag. The gas chromatographic peaks of cyclic and branched alkanes with relatively high resolution from nCl0 to nC25 were selected to establish a database of whole-oil gas chromatographic peak height ratio fingerprints. Reservoir fluid connectivity was identified by using clustering analysis. This method can reflect the gas chromatography fingerprint information accurately and entirely, and avoid the one-sidedness of the star diagram method which only selects several fixed gas chromatographic peaks.展开更多
The Shahejie Formation is a fundamental rock unit for hydrocarbon exploration and production in the Nanpu Sag,Bohai Bay Basin.Methodology including thin sectioning,core observations,fluorescence,scanning electron micr...The Shahejie Formation is a fundamental rock unit for hydrocarbon exploration and production in the Nanpu Sag,Bohai Bay Basin.Methodology including thin sectioning,core observations,fluorescence,scanning electron microscopy,cathodoluminescence,fluid inclusion,laser scanning confocal microscopy and geochemical analysis(C,O isotopes)were all utilized to investigate the reservoir characteristics and origin of the Es_(1)Sandstone.Thin section study showed that the reservoir rock consisted of feldspathic litharenite and lithic arkose.The reservoir pores are categorized as intergranular pores,fracture pores,dissolution pores and intergranular cement dissolution pores.The studied sandstone had good porosity(0.05%–35%)and permeability(0.006–7000 mD).The Es_(1) reservoir is classified as a fractured reservoir,a primary intergranular pore-associated reservoir and a dissolution reservoir.Deposition,diagenesis and tectogenesis are the main factors that played important roles in the development of the reservoir.Sedimentation is the foundation and assumption for reservoir development,but the effective reservoir is primarily controlled by primary pores,fractures,lithofacies,tectonic elements and dissolution pores.Moreover,compaction,fracture filling and cementation were the primary sources of reservoir densification.The reservoir was progressively formed through the influence of different geological and diagenetic events.The present study provides significant information and references for hydrocarbon exploration and development in the Nanpu Sag.展开更多
1.会议背景介绍2015年6月28日至7月5日,国际生态经济学会（The International Society for Ecological Economics）主办的第1 1届生态经济学国际大会(The 11thbiennial conference of the European Society for Ecological Economics 20...1.会议背景介绍2015年6月28日至7月5日,国际生态经济学会（The International Society for Ecological Economics）主办的第1 1届生态经济学国际大会(The 11thbiennial conference of the European Society for Ecological Economics 2015,简称ESEE2015)在英国利兹大学隆重举行②。此次年会的主题定为"转型"（Transformations）,尝试在理论层面解决社会在向可持续发展转型的过程中出现的问题。这些问题主要集中在以下七个领域:后增长时期经济学(Post-growth econom.展开更多
The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfie...The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfield as an example, through the analysis of stratigraphic drilling and logging data in the study area, according to the genetic types of different levels of base level cycle interfaces and the characteristics of high-resolution sequence stratigraphy, this paper subdivides the lacustrine gravity flow oil layer of lower Es3 in Wuhaozhuang Oilfield, divides it into four short-term base level cycle sequences, and establishes the high-resolution isochronous stratigraphic framework of this interval. It is found that the mid-term, short-term and ultra short-term base level cycles correspond to the oil formation, sand layer group and single layer in the oil layer correlation unit of the oilfield respectively. Based on this, the oil layer correlation unit of the interval is divided, and the sublayer correlation model is established according to the identification characteristics of the short-term base level cycle.展开更多
For structural design and assessment of reinforced concrete members, the nonlinear analysis has become an important tool. The purpose of the pushover analysis is to assess the structural performance by estimating the ...For structural design and assessment of reinforced concrete members, the nonlinear analysis has become an important tool. The purpose of the pushover analysis is to assess the structural performance by estimating the strength and deformation capacities using static, nonlinear analysis and comparing these capacities with the demands at the corresponding performance levels. This paper aims to compare the results given by IBC2009 code and ESEE regulations. In this paper, four RC frames having 5, 15, 20 and 30 storeys were designed for seismicity according to both the recently adopted seismic code in Abu Dhabi (IBC2009) and the ESEE regulations. A pushover analysis is carried out for these buildings using SAP2000 (Ver. 15) and the ultimate capacities of the buildings are established. The obtained pushover curves and plastic hinges distributions are used to compare between the IBC2009 code and ESEE regulations. The comparison showed that there was variation in the obtained results by the two codes and the buildings designed by IBC2009 code were more vulnerable.展开更多
基金funded by Shandong Provincial Key Laboratory of Depositional Mineralization & Sedimentary Minerals (Project DMSM201009)Key Laboratory of Tectonics and Petroleum Resources (China University of Geosciences), Ministry of Education, China (Project TPR-2010-29)
文摘In this study, whole-oil gas chromatographic fingerprint analyses were performed on oils from the Es3^3 reservoir in the Liubei area of the Nanpu Sag. The gas chromatographic peaks of cyclic and branched alkanes with relatively high resolution from nCl0 to nC25 were selected to establish a database of whole-oil gas chromatographic peak height ratio fingerprints. Reservoir fluid connectivity was identified by using clustering analysis. This method can reflect the gas chromatography fingerprint information accurately and entirely, and avoid the one-sidedness of the star diagram method which only selects several fixed gas chromatographic peaks.
基金This study was funded by the Natural Science Foundation of China Project(No.41602138)National Science and Technology Special Grant(No.2016ZX05006-007)+1 种基金China Postdoctoral Science Foundation-funded project(No.2015M580617,2017T100524)the Fundamental Research Funds for the Central Universities(No.15CX08001A).
文摘The Shahejie Formation is a fundamental rock unit for hydrocarbon exploration and production in the Nanpu Sag,Bohai Bay Basin.Methodology including thin sectioning,core observations,fluorescence,scanning electron microscopy,cathodoluminescence,fluid inclusion,laser scanning confocal microscopy and geochemical analysis(C,O isotopes)were all utilized to investigate the reservoir characteristics and origin of the Es_(1)Sandstone.Thin section study showed that the reservoir rock consisted of feldspathic litharenite and lithic arkose.The reservoir pores are categorized as intergranular pores,fracture pores,dissolution pores and intergranular cement dissolution pores.The studied sandstone had good porosity(0.05%–35%)and permeability(0.006–7000 mD).The Es_(1) reservoir is classified as a fractured reservoir,a primary intergranular pore-associated reservoir and a dissolution reservoir.Deposition,diagenesis and tectogenesis are the main factors that played important roles in the development of the reservoir.Sedimentation is the foundation and assumption for reservoir development,but the effective reservoir is primarily controlled by primary pores,fractures,lithofacies,tectonic elements and dissolution pores.Moreover,compaction,fracture filling and cementation were the primary sources of reservoir densification.The reservoir was progressively formed through the influence of different geological and diagenetic events.The present study provides significant information and references for hydrocarbon exploration and development in the Nanpu Sag.
文摘1.会议背景介绍2015年6月28日至7月5日,国际生态经济学会（The International Society for Ecological Economics）主办的第1 1届生态经济学国际大会(The 11thbiennial conference of the European Society for Ecological Economics 2015,简称ESEE2015)在英国利兹大学隆重举行②。此次年会的主题定为"转型"（Transformations）,尝试在理论层面解决社会在向可持续发展转型的过程中出现的问题。这些问题主要集中在以下七个领域:后增长时期经济学(Post-growth econom.
文摘The phase change of lacustrine gravity flow deposition is fast and complex. In its reservoir division and correlation, the isochronous problem is very important. Taking the oil formation I of Es3 in Wuhaozhuang oilfield as an example, through the analysis of stratigraphic drilling and logging data in the study area, according to the genetic types of different levels of base level cycle interfaces and the characteristics of high-resolution sequence stratigraphy, this paper subdivides the lacustrine gravity flow oil layer of lower Es3 in Wuhaozhuang Oilfield, divides it into four short-term base level cycle sequences, and establishes the high-resolution isochronous stratigraphic framework of this interval. It is found that the mid-term, short-term and ultra short-term base level cycles correspond to the oil formation, sand layer group and single layer in the oil layer correlation unit of the oilfield respectively. Based on this, the oil layer correlation unit of the interval is divided, and the sublayer correlation model is established according to the identification characteristics of the short-term base level cycle.
文摘For structural design and assessment of reinforced concrete members, the nonlinear analysis has become an important tool. The purpose of the pushover analysis is to assess the structural performance by estimating the strength and deformation capacities using static, nonlinear analysis and comparing these capacities with the demands at the corresponding performance levels. This paper aims to compare the results given by IBC2009 code and ESEE regulations. In this paper, four RC frames having 5, 15, 20 and 30 storeys were designed for seismicity according to both the recently adopted seismic code in Abu Dhabi (IBC2009) and the ESEE regulations. A pushover analysis is carried out for these buildings using SAP2000 (Ver. 15) and the ultimate capacities of the buildings are established. The obtained pushover curves and plastic hinges distributions are used to compare between the IBC2009 code and ESEE regulations. The comparison showed that there was variation in the obtained results by the two codes and the buildings designed by IBC2009 code were more vulnerable.
