Exponentially Convergent Multiscale Finite Element Method

We provide a concise review of the exponentially convergent multiscale finite element method(ExpMsFEM)for efficient model reduction of PDEs in heterogeneous media without scale separation and in high-frequency wave propagation.The ExpMsFEM is built on the non-overlapped domain decomposition in the classical MsFEM while enriching the approximation space systematically to achieve a nearly exponential convergence rate regarding the number of basis functions.Unlike most generalizations of the MsFEM in the literature,the ExpMsFEM does not rely on any partition of unity functions.In general,it is necessary to use function representations dependent on the right-hand side to break the algebraic Kolmogorov n-width barrier to achieve exponential convergence.Indeed,there are online and offline parts in the function representation provided by the ExpMsFEM.The online part depends on the right-hand side locally and can be computed in parallel efficiently.The offline part contains basis functions that are used in the Galerkin method to assemble the stiffness matrix;they are all independent of the right-hand side,so the stiffness matrix can be used repeatedly in multi-query scenarios.

Non-harmonic resonance of viscoelastic structures subjected to time-dependent exponentially decreasing transverse distributed loads

In this paper,the non-harmonic resonance of Bernoulli viscoelastic beams,Kirchhoff viscoelastic plates,Timoshenko viscoelastic beams,and Mindlin viscoelastic plates subjected to time-dependent exponentially decreasing transverse distributed load is investigated for the first time.The constitutive equations are expressed utilizing Boltzmann integral law with a constant bulk modulus.The displacement vector is approximated by employing the separation of variables method.The Laplace transformation is used to transfer equations from the time domain to the Laplace domain and vice versa.The novel point of the proposed method is to express,prove and calculate the critical time in which the displacement will be several times the displacement at time zero.In addition,this new method calculates the maximum deflection at the critical time,explicitly and exactly,without any need to follow the time-displacement curve with a low computational cost.Additionally,the proposed method introduces the critical range of time so that the responses are greater than the responses at time zero.

Unsteady boundary layer flow and heat transfer over an exponentially shrinking sheet with suction in a copper-water nanofluid

An analysis of unsteady boundary layer flow and heat transfer over an exponentially shrinking porous sheet filled with a copper-water nanofluid is presented.Water is treated as a base fluid.In the investigation,non-uniform mass suction through the porous sheet is considered.Using Keller-box method the transformed equations are solved numerically.The results of skin friction coefficient,the local Nusselt number as well as the velocity and temperature profiles are presented for different flow parameters.The results showed that the dual non-similar solutions exist only when certain amount of mass suction is applied through the porous sheet for various unsteady parameters and nanoparticle volume fractions.The ranges of suction where dual non-similar solution exists,become larger when values of unsteady parameter as well as nanoparticle volume fraction increase.So,due to unsteadiness of flow dynamics and the presence of nanoparticles in flow field,the requirement of mass suction for existence of solution of boundary layer flow past an exponentially shrinking sheet is less.Furthermore,the velocity boundary layer thickness decreases and thermal boundary layer thickness increases with increasing of nanoparticle volume fraction in both non-similar solutions.Whereas,for stronger mass suction,the velocity boundary layer thickness becomes thinner for the first solution and the effect is opposite in the case of second solution.The temperature inside the boundary layer increases with nanoparticle volume fraction and decreases with mass suction.So,for the unsteadiness and for the presence of nanoparticles,the flow separation is delayed to some extent.

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic （MHD） flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper （Cu）, Silver （Ag）, Alumina （A1203） and Titanium Oxide （TiO2）. Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.

EXPONENTIALLY BOUNDED C-SEMIGROUP AND INTEGRATED SEMIGROUP WITH NONDENSELY DEFINED GENERATORS I: APPROXIMATION:

In this paper, by Laplace transform version of the Trotter-Kato approximation theorem and the integrated C-semigroup introduced by Myadera, the authors obtained some Trotter-Kato approximation theorems on exponentially bounded C-semigroups, where the range of C (and so the domain of the generator) may not be dense. The authors deduced the corresponding results on exponentially bounded integrated semigroups with nondensely generators. The results of this paper extended and perfected the results given by Lizama, Park and Zheng.

Diffusion of chemically reactive species in third grade fluid flow over an exponentially stretching sheet considering magnetic field effects

This article addresses the magnetohydrodynamics(MHD) flow of a third grade fluid over an exponentially stretching sheet. Analysis is carried out in the presence of first order chemical reaction. Both cases of constructive and destructive chemical reactions are reported. Convergent solutions of the resulting differential systems are presented in series forms. Characteristics of various sundry parameters on the velocity, concentration, skin friction and local Sherwood number are analyzed and discussed.

Entropy Generation for Flow and Heat Transfer of Sisko-Fluid Over an Exponentially Stretching Surface

In the present study,the effects of the magnetic field on the entropy generation during fluid flow and heat transfer of a Sisko-fluid over an exponentially stretching surface are considered.The similarity transformations are used to transfer the governing partial differential equations into a set of nonlinear-coupled ordinary differential equations.Runge-Kutta-Fehlberg method is used to solve the governing problem.The effects of magnetic field parameter,local slip parameterλ,generalized Biot numberγ,Sisko fluid material parameter,Eckert number Ec,Prandtl number Pr and Brinkman number Br at two values of power law index on the velocity,temperature,local entropy generation number N_(G) and Bejan number Be are inspected.Moreover,the tabular forms for local skin friction coefficient and local Nusselt number under the effects of the physical parameters are exhibited.The current results are helpful in checking the entropy generation for Sisko-fluid.It is found that,an extra magnetic field parameter makes higher Lorentz force that suppresses the velocity.For shear thinning fluids(n<1),the temperature dominates and the velocity rises.Local entropy generation number is more for larger generalized Biot number,magnetic field parameter and Brinkman number.The local skin friction coefficient increases as magnetic field parameter and material parameter are increase and it decreases as local slip parameter increases.The local Nusselt number decreases as magnetic field parameter,local slip parameter and Eckert number are increase,while it increases as material parameter,generalized Biot number and Prandtl number are increase.

Thermal Radiation Effects on MHD Boundary Layer Flow over an Exponentially Stretching Surface

The steady two-dimensional laminar boundary layer flow and heat transfer of a viscous incompressible electrically conducting fluid over an exponentially stretching surface in the presence of a uniform magnetic field with thermal radiation are investigated. The governing boundary layer equations are transformed to ordinary differential equations by taking suitable similarity transformation and solved numerically by shooting method. The effects of various parameters such as magnetic parameter, radiation parameter, Prandtl number and Eckert number on local skin-friction coefficient, local Nusselt number, velocity and temperature distributions are computed and represented graphically.

Numerical treatment for Darcy-Forchheimer flow of carbon nanotubes due to an exponentially stretching curved surface

This article gives a numerical report to two dimensional(2D)Darcy-Forchheimer flow of carbon-water nanofluid.Flow is instigated by exponential extending curved surface.Viscous liquid in permeable space is described by Darcy-Forchheimer.The subsequent arrangement of partial differential equations is changed into ordinary differential framework through proper transformations.Numerical arrangements of governing frameworks are set up by NDSolve procedure.Outcomes of different sundry parameters on temperature and velocity are examined.Skin friction and heat transfer rate are also shown and inspected.

Buckling analysis of nanobeams with exponentially varying stiffness by differential quadrature method

We present the application of differential quadrature（DQ） method for the buckling analysis of nanobeams with exponentially varying stiffness based on four different beam theories of Euler-Bernoulli, Timoshenko, Reddy, and Levison.The formulation is based on the nonlocal elasticity theory of Eringen. New results are presented for the guided and simply supported guided boundary conditions. Numerical results are obtained to investigate the effects of the nonlocal parameter,length-to-height ratio, boundary condition, and nonuniform parameter on the critical buckling load parameter. It is observed that the critical buckling load decreases with increase in the nonlocal parameter while the critical buckling load parameter increases with increase in the length-to-height ratio.

Boundary layer flow of Oldroyd-B fluid by exponentially stretching sheet

The present paper investigates the steady flow of an Oldroyd-B fluid. The fluid flow is induced by an exponentially stretched surface. Suitable transformations reduce a system of nonlinear partial differential equations to a system of ordinary dif- ferential equations. Convergence of series solution is discussed explicitly by a homotopy analysis method （HAM）. Velocity, temperature and heat transfer rates are examined for different involved parameters through graphs. It is revealed that for a larger retardation time constant, the velocity is enhanced and the temperature is lowered. It is noted that relaxation time constant and the Prandtl number enhance the heat transfer rate.

Influence of Chemical Reaction and Thermal Radiation on MHD Boundary Layer Flow and Heat Transfer of a Nanofluid over an Exponentially Stretching Sheet

In the present article a numerical analysis has been carried out to study the boundary layer flow behavior and heat transfer characteristics of a nanofluid over an exponential stretching sheet. By assuming the stretching sheet to be impermeable, the effect of chemical reaction, thermal radiation, thermopherosis, Brownian motion and suction parameters in the presence of uniform magnetic field on heat and mass transfer are addressed. The governing system of equations is transformed into coupled nonlinear ordinary differential equations using suitable similarity transformations. The transformed equations are then solved numerically using the well known Runge-Kutta-Fehlberg method of fourth-fifth order. A detailed parametric study is performed to access the influence of the physical parameters on longitudinal velocity, temperature and nanoparticle volume fraction profiles as well as the local skin-friction coefficient, local Nusselt number and the local Sherwood number and the results are presented in both graphical and tabular forms.

Millimeter wave dielectric loaded exponentially tapered slot antenna array using substrate integrated waveguide for gigabit wireless communications

A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.

Global exponentially stability for time-delay and time-varying measure large scale systems with impulsive effects

The global exponentially stability was studied for time-delay and time-varying measure large scale systems with impulsive effects. Firstly, the concepts are drawn for the functional category. Secondly, some sufficient conditions of the uniformly stability and the global exponentially stability are given for the above systems through defining a Lyapunov function of the weighting sum of the variable absolute by using the Lyapunov function method and the comparison principle. At the same time, the new conclusion of stability of these systems is more universal and contains the existing results. Finally, an example is given to illustrate the feasibility and validity of the obtained results.

Some results on P-harmonic maps and exponentially harmonic maps between Finsler manifolds

This paper studies the stability of P-harmonic maps and exponentially harmonic maps from Finsler manifolds to Riemannian manifolds by an extrinsic average variational method in the calculus of variations. It generalizes Li＇s results in [2] and [3].

Potential Response Analysis of Exponentially Decaying Polarizing Current of Electrode and its Use in the Study of Stress Corrosion Cracking(SCC)of Stainless Steel

A study on the potential response of exponentially decaying polarizing current of electrode was car- ried out.The appearance of critical point of the potential-time response of exponentially decaying current was ensured from theoretical analysis,and this is the theoretical foundation of the critical point method for the measurement of corrosion current of metals.The comparison of the corrosion currents measured by the critical point and static methods for the system of 321 stainless steel in 0.5N HCI+0.5N NaCI solution at static state shows that the results agree very well.Finally.the tran- sient corrosion currents of 321 stainless steel in 0.5N HCI+0.5N NaCl solution at different strain level are listed.

The New Neutrosophic Double and Triple Exponentially Weighted Moving Average Control Charts

The concept of neutrosophic statistics is applied to propose two monitoring schemes which are an improvement of the neutrosophic exponentially weighted moving average(NEWMA)chart.In this study,two control charts are designed under the uncertain environment or neutrosophic statistical interval system,when all observations are undermined,imprecise or fuzzy.These are termed neutrosophic double and triple exponentially weighted moving average(NDEWMA and NTEWMA)control charts.For the proficiency of the proposed chart,Monte Carlo simulations are used to calculate the run-length characteristics(such as average run length(ARL),standard deviation of the run length(SDRL),percentiles(P_(25),P_(50),P_(75)))of the proposed charts.The structures of the proposed control charts are more effective in detecting small shifts while these are comparable with the other existing charts in detecting moderate and large shifts.The simulation study and real-life implementations of the proposed charts show that the proposed NDEWMA and NTEWMA charts perform better in monitoring the process of road traffic crashes and electric engineering data as compared to the existing control charts.Therefore,the proposed charts will be helpful in minimizing the road accident and minimizing the defective products.Furthermore,the proposed charts are more acceptable and actual to apply in uncertain environment.

ON CONSTRUCTION OF HIGH ORDER EXPONENTIALLY FITTED METHODS BASED ON PARAMETERIZED RATIONAL APPROXIMATIONS TO exp

By the discussion of the formula and properties of (4,4) parametric form rational approximation to function exp(q), the fourth order derivative one_step exponentially fitted method and the third order derivative hybrid one_step exponentially fitted method are presented, their order p satisfying 6≤p≤8. The necessary and sufficient conditions for the two methods to be A_ stable are given. Finally, for the fourth order derivative method, the error bound and the necessary and sufficient conditions for it to be median are discussed.

HIGH ORDER ONE-STEP A-STABLE EXPONENTIALLY FITTED METHODS

In this paper,the necessary and sufficient conditions for generalone-step m ethods to be exponentially fitted atq0∈C aregiven.A classofm ultiderivative hybrid one-step m ethods of order at leasts+ 1 is constructed w ith s+ 1 param eters,w here sis the order of derivative.The necessary and sufficient conditions for these m ethods to be A-stable and exponentially fitted is proved.Furtherm ore,a class ofA-stable 2 param eters hybrid one-step m ethods oforderatleast 8 are constructed,w hich use 4th order derivative.These m ethods are exponentially fitted atq0 if and only if its fitted function f(q) satisfies f(q0)= 0.Finally,an A-stable exponentially fitted m ethod oforder 8 is obtained.

Parameters optimization for exponentially weighted moving average control chart using generalized regression neural network

As a useful alternative of Shewhart control chart, exponentially weighted moving average （EWMA） control chat has been applied widely to quality control, process monitoring, forecast, etc. In this paper, a method was introduced for optimal design of EWMA and multivariate EWMA （MEWMA） control charts, in which the optimal parameter pair （ λ, k） or （ λ, h ） was searched by using the generalized regression neural network （GRNN）. The results indicate that the optimal parameter pair can be obtained effectively by the proposed strategy for a given in-control average running length （ARLo） and shift to detect under any conditions, removing the drawback of incompleteness existing in the tables that had been reported.