Landslide susceptibility mapping using an integrated model of information value method and logistic regression in the Bailongjiang watershed,Gansu Province,China

Bailongjiang watershed in southern Gansu province, China, is one of the most landslide-prone regions in China, characterized by very high frequency of landslide occurrence. In order to predict the landslide occurrence, a comprehensive map of landslide susceptibility is required which may be significantly helpful in reducing loss of property and human life. In this study, an integrated model of information value method and logistic regression is proposed by using their merits at maximum and overcoming their weaknesses, which may enhance precision and accuracy of landslide susceptibility assessment. A detailed and reliable landslide inventory with 1587 landslides was prepared and randomly divided into two groups,(i) training dataset and(ii) testing dataset. Eight distinct landslide conditioning factors including lithology, slope gradient, aspect, elevation, distance to drainages,distance to faults, distance to roads and vegetation coverage were selected for landslide susceptibility mapping. The produced landslide susceptibility maps were validated by the success rate and prediction rate curves. The validation results show that the success rate and the prediction rate of the integrated model are 81.7 % and 84.6 %, respectively, which indicate that the proposed integrated method is reliable to produce an accurate landslide susceptibility map and the results may be used for landslides management and mitigation.

A sludge volume index (SVI) model based on the multivariate local quadratic polynomial regression method

In this study, a multivariate local quadratic polynomial regression(MLQPR) method is proposed to design a model for the sludge volume index(SVI). In MLQPR, a quadratic polynomial regression function is established to describe the relationship between SVI and the relative variables, and the important terms of the quadratic polynomial regression function are determined by the significant test of the corresponding coefficients. Moreover, a local estimation method is introduced to adjust the weights of the quadratic polynomial regression function to improve the model accuracy. Finally, the proposed method is applied to predict the SVI values in a real wastewater treatment process(WWTP). The experimental results demonstrate that the proposed MLQPR method has faster testing speed and more accurate results than some existing methods.

Nuclear charge radius predictions by kernel ridge regression with odd-even effects

The extended kernel ridge regression(EKRR)method with odd-even effects was adopted to improve the description of the nuclear charge radius using five commonly used nuclear models.These are:(i)the isospin-dependent A^(1∕3) formula,(ii)relativistic continuum Hartree-Bogoliubov(RCHB)theory,(iii)Hartree-Fock-Bogoliubov(HFB)model HFB25,(iv)the Weizsacker-Skyrme(WS)model WS*,and(v)HFB25*model.In the last two models,the charge radii were calculated using a five-parameter formula with the nuclear shell corrections and deformations obtained from the WS and HFB25 models,respectively.For each model,the resultant root-mean-square deviation for the 1014 nuclei with proton number Z≥8 can be significantly reduced to 0.009-0.013 fm after considering the modification with the EKRR method.The best among them was the RCHB model,with a root-mean-square deviation of 0.0092 fm.The extrapolation abilities of the KRR and EKRR methods for the neutron-rich region were examined,and it was found that after considering the odd-even effects,the extrapolation power was improved compared with that of the original KRR method.The strong odd-even staggering of nuclear charge radii of Ca and Cu isotopes and the abrupt kinks across the neutron N=126 and 82 shell closures were also calculated and could be reproduced quite well by calculations using the EKRR method.

Performance analysis of empirical models for predicting rock mass deformation modulus using regression and Bayesian methods

Deformation modulus of rock mass is one of the input parameters to most rock engineering designs and constructions.The field tests for determination of deformation modulus are cumbersome,expensive and time-consuming.This has prompted the development of various regression equations to estimate deformation modulus from results of rock mass classifications,with rock mass rating(RMR)being one of the frequently used classifications.The regression equations are of different types ranging from linear to nonlinear functions like power and exponential.Bayesian method has recently been developed to incorporate regression equations into a Bayesian framework to provide better estimates of geotechnical properties.The question of whether Bayesian method improves the estimation of geotechnical properties in all circumstances remains open.Therefore,a comparative study was conducted to assess the performances of regression and Bayesian methods when they are used to characterize deformation modulus from the same set of RMR data obtained from two project sites.The study also investigated the performance of different types of regression equations in estimation of the deformation modulus.Statistics,probability distributions and prediction indicators were used to assess the performances of regression and Bayesian methods and different types of regression equations.It was found that power and exponential types of regression equations provide a better estimate than linear regression equations.In addition,it was discovered that the ability of the Bayesian method to provide better estimates of deformation modulus than regression method depends on the quality and quantity of input data as well as the type of the regression equation.

Statistical Analysis of Fuzzy Linear Regression Model Based on Centroid Method

This paper transforms fuzzy number into clear number using the centroid method, thus we can research the traditional linear regression model which is transformed from the fuzzy linear regression model. The model’s input and output are fuzzy numbers, and the regression coefficients are clear numbers. This paper considers the parameter estimation and impact analysis based on data deletion. Through the study of example and comparison with other models, it can be concluded that the model in this paper is applied easily and better.

Determination of Compositions and Stability Constants of Holmium and Yttrium Complexes with Tribromoarsenazo by Linear Regression Method

According to the appearing of isosbestic point in the absorption spectra of Ho/Y-Tribromoarsenazo (TBA)systems,the complexation reaction is considered to be M+nL=ML_n.A method has been proposed based on it for calculating the mole fraction of free complexing agent in the solutions from spectral data.and two linear regression formula have been introduced to determine the composition,the molar absorptivity,the conditional stability constant of the complex and the concentration of the complexing agent. This method has been used in Ho-TBA and Y-TBA systems.Ho^(3+)and Y^(3+)react with TBA and form 1: 2 complexes in HCl-NaAc buffer solution at pH 3.80.Their molar absorptivities determined are 1.03×10~8 and 1.10×10~8 cm^2·mol^(-1),and the conditional stability constants(logβ_2)are 11.37 and 11.15 respectively.After considering the pH effect in TBA complexing,their stability constants(log β_2^(ahs))are 43.23 and 43.01. respectively.The new method is adaptable to such systems where the accurate concentration of the complexing agent can not be known conveniently.

Determination of Composition and Stability Constant of Praseodymium(Pr^(3+))Complex with Tribromoarsenazo(TBA)by Dual-Series Linear Regression Method

A new method,dual-series linear regression method,has been used to study the complexation equilibrium of praseodymium(Pr^(3+))with tribromoarsenazo(TBA)without knowing the accurate concentra- tion of the complexing agent TBA.In 1.2 mol/L HCl solution, Pr^(3+)reacts with TBA and forms 1:3 com- plex,the conditional stability constant(lgβ_3)of the complex determined is 15.47,and its molar absorptivity(ε_3^(630))is 1.48×10~5 L·mol^(-1)·cm^(-1).

The Application of Ridge Regression in Dynamic Balancing of Flexible Rotors Based on Influence Coefficient Method

Based on the model structure of the influence coefficient method analyzed in depth by matrix theory ,it is explained the reason why the unreasonable and instable correction masses with bigger MSE are obtained by LS influence coefficient method when there are correlation planes in the dynamic balancing. It also presencd the new ridge regression method for solving correction masses according to the Tikhonov regularization theory, and described the reason why the ridge regression can eliminate the disadvantage of the LS method. Applying this new method to dynamic balancing of gas turbine, it is found that this method is superior to the LS method when influence coefficient matrix is ill-conditioned,the minimal correction masses and residual vibration are obtained in the dynamic balancing of rotors.

Analysis of the Invariance and Generalizability of Multiple Linear Regression Model Results Obtained from Maslach Burnout Scale through Jackknife Method

The purpose of this study was to examine the burnout levels of research assistants in Ondokuz Mayis University and to examine the results of multiple linear regression model based on the results obtained from Maslach Burnout Scale with Jackknife Method in terms of validity and generalizability. To do this, a questionnaire was given to 11 research assistants working at Ondokuz Mayis University and the burnout scores of this questionnaire were taken as the dependent variable of the multiple linear regression model. The variable of burnout was explained with the variables of age, weekly hours of classes taught, monthly average credit card debt, numbers of published articles and reports, gender, marital status, number of children and the departments of the research assistants. Dummy variables were assigned to the variables of gender, marital status, number of children and the departments of the research assistants and thus, they were made quantitative. The significance of the model as a result of multiple linear regressions was examined through backward elimination method. After this, for the five explanatory variables which influenced the variable of burnout, standardized model coefficients and coefficients of determination, and 95% confidence intervals of these values were estimated through Jackknife Method and the generalizability of the parameter estimation results of these variables on population was researched.

Evaluation of cloud seeding project in Yazd Province of Iran using historical regression method(case study:Yazd 1 cloud seeding project,1999)

In this research, the result of the cloud seeding over Yazd province during three months of February, March and April in 1999 has been evaluated using the historical regression method. Hereupon, the rain-gages in Yazd province as the target stations and the rain-gages of the neighboring provinces as the control stations have been selected. The rainfall averages for the three aforementioned months through 25 years (1973-1997) in all control and target stations have been calculated. In the next step, the correlations between the rainfalls of control and target stations have been estimated about 75%, which indicates a good consistency in order to use the historical regression. Then, through the obtained liner correlation equation between the control and target stations the precipitation amount for February, March and April in 1999, over the target region (Yazd province) was estimated about 27.57 mm, whiles the observed amount was 34.23 mm. In fact the precipitation increasing around 19.5% over Yazd province confirmed the success of this cloud seeding project.

A Fast Iteration Method for Mixture Regression Problem

In this paper, we propose a Fast Iteration Method for solving mixture regression problem, which can be treated as a model-based clustering. Compared to the EM algorithm, the proposed method is faster, more flexible and can solve mixture regression problem with different error distributions (i.e. Laplace and t distribution). Extensive numeric experiments show that our proposed method has better performance on randomly simulations and real data.

Preliminary Application of Combinatorial Measurement and Regression Analysis Method to High Precision Instrumental Analysis

With determination micro-Fe by 1, 10-phenanthroline spectrophotometry for example, they are systematically introduced the combinatorial measurement and regression analysis method application about metheodic principle, operation step and data processing in the instrumental analysis, including: calibration curve best linear equation is set up, measurand best linear equation is set up, and calculation of best value of a concentration. The results showed that mean of thrice determination , s = 0 μg/mL, RSD = 0. Results of preliminary application are simply introduced in the basic instrumental analysis for atomic absorption spectrophotometry, ion-selective electrodes, coulometry and polarographic analysis and are contrasted to results of normal measurements.

Medium Term Load Forecasting for Jordan Electric Power System Using Particle Swarm Optimization Algorithm Based on Least Square Regression Methods

This paper presents a technique for Medium Term Load Forecasting (MTLF) using Particle Swarm Optimization (PSO) algorithm based on Least Squares Regression Methods to forecast the electric loads of the Jordanian grid for year of 2015. Linear, quadratic and exponential forecast models have been examined to perform this study and compared with the Auto Regressive (AR) model. MTLF models were influenced by the weather which should be considered when predicting the future peak load demand in terms of months and weeks. The main contribution for this paper is the conduction of MTLF study for Jordan on weekly and monthly basis using real data obtained from National Electric Power Company NEPCO. This study is aimed to develop practical models and algorithm techniques for MTLF to be used by the operators of Jordan power grid. The results are compared with the actual peak load data to attain minimum percentage error. The value of the forecasted weekly and monthly peak loads obtained from these models is examined using Least Square Error (LSE). Actual reported data from NEPCO are used to analyze the performance of the proposed approach and the results are reported and compared with the results obtained from PSO algorithm and AR model.

Effects of Multicollinearity on Type I Error of Some Methods of Detecting Heteroscedasticity in Linear Regression Model

Heteroscedasticity and multicollinearity are serious problems when they exist in econometrics data. These problems exist as a result of violating the assumptions of equal variance between the error terms and that of independence between the explanatory variables of the model. With these assumption violations, Ordinary Least Square Estimator (OLS) will not give best linear unbiased, efficient and consistent estimator. In practice, there are several structures of heteroscedasticity and several methods of heteroscedasticity detection. For better estimation result, best heteroscedasticity detection methods must be determined for any structure of heteroscedasticity in the presence of multicollinearity between the explanatory variables of the model. In this paper we examine the effects of multicollinearity on type I error rates of some methods of heteroscedasticity detection in linear regression model in other to determine the best method of heteroscedasticity detection to use when both problems exist in the model. Nine heteroscedasticity detection methods were considered with seven heteroscedasticity structures. Simulation study was done via a Monte Carlo experiment on a multiple linear regression model with 3 explanatory variables. This experiment was conducted 1000 times with linear model parameters of β0 = 4 , β1 = 0.4 , β2= 1.5 and β3 = 3.6. Five (5) levels of mulicollinearity are with seven (7) different sample sizes. The method’s performances were compared with the aids of set confidence interval (C.I.) criterion. Results showed that whenever multicollinearity exists in the model with any forms of heteroscedasticity structures, Breusch-Godfrey (BG) test is the best method to determine the existence of heteroscedasticity at all chosen levels of significance.

Prediction of COVID-19 Confirmed Cases Using Gradient Boosting Regression Method

The fast spread of coronavirus disease(COVID-19)caused by SARSCoV-2 has become a pandemic and a serious threat to the world.As of May 30,2020,this disease had infected more than 6 million people globally,with hundreds of thousands of deaths.Therefore,there is an urgent need to predict confirmed cases so as to analyze the impact of COVID-19 and practice readiness in healthcare systems.This study uses gradient boosting regression(GBR)to build a trained model to predict the daily total confirmed cases of COVID-19.The GBR method can minimize the loss function of the training process and create a single strong learner from weak learners.Experiments are conducted on a dataset of daily confirmed COVID-19 cases from January 22,2020,to May 30,2020.The results are evaluated on a set of evaluation performance measures using 10-fold cross-validation to demonstrate the effectiveness of the GBR method.The results reveal that the GBR model achieves 0.00686 root mean square error,the lowest among several comparative models.

Development of a Quantitative Prediction Support System Using the Linear Regression Method

The development of prediction supports is a critical step in information systems engineering in this era defined by the knowledge economy, the hub of which is big data. Currently, the lack of a predictive model, whether qualitative or quantitative, depending on a company’s areas of intervention can handicap or weaken its competitive capacities, endangering its survival. In terms of quantitative prediction, depending on the efficacy criteria, a variety of methods and/or tools are available. The multiple linear regression method is one of the methods used for this purpose. A linear regression model is a regression model of an explained variable on one or more explanatory variables in which the function that links the explanatory variables to the explained variable has linear parameters. The purpose of this work is to demonstrate how to use multiple linear regressions, which is one aspect of decisional mathematics. The use of multiple linear regressions on random data, which can be replaced by real data collected by or from organizations, provides decision makers with reliable data knowledge. As a result, machine learning methods can provide decision makers with relevant and trustworthy data. The main goal of this article is therefore to define the objective function on which the influencing factors for its optimization will be defined using the linear regression method.

Pointwise Convergence of a Nonparametric Estimator of Regression in a Measurable Space Used in Contingent Valuation Method

The Contingent Valuation Method is used to evaluate individual preferences for a change concerning a public non-market resource or property. The objective is to build a nonparametric forecasting model of an individual＇s Willingness To Pay according to geographical location. Within this framework, an estimator （of type Nadaraya-Watson） is proposed for the regression of the variable related to geolocation. The specific characteristics of the location variable lead us to a more general regression model than the traditional models. Results are established for convergence of our estimator.

DDM regression analysis of the in-situ stress field in a non-linear fault zone

A multivariable regression analysis of the in-situ stress field, which considers the non-linear deformation behavior of faults in practical projects, is presented based on a newly developed three-dimensional displacement discontinuity method （DDM） program. The Bar- ton-Bandis model and the Kulhaway model are adopted as the normal and the tangential deformation model of faults, respectively, where the Mohr-Coulomb failure criterion is satisfied. In practical projects, the values of the mechanical parameters of rock and faults are restricted in a bounded range for in-situ test, and the optimal mechanical parameters are obtained from this range by a loop. Comparing with the traditional finite element method （FEM）, the DDM regression results are more accurate.

EFFICIENT ESTIMATION OF FUNCTIONAL-COEFFICIENT REGRESSION MODELS WITH DIFFERENT SMOOTHING VARIABLES

In this article,a procedure for estimating the coefficient functions on the functional-coefficient regression models with different smoothing variables in different coefficient functions is defined.First step,by the local linear technique and the averaged method,the initial estimates of the coefficient functions are given.Second step,based on the initial estimates,the efficient estimates of the coefficient functions are proposed by a one-step back-fitting procedure.The efficient estimators share the same asymptotic normalities as the local linear estimators for the functional-coefficient models with a single smoothing variable in different functions.Two simulated examples show that the procedure is effective.

Data-driven computing in elasticity via kernel regression

This paper presents a simple nonparametric regression approach to data-driven computing in elasticity. We apply the kernel regression to the material data set, and formulate a system of nonlinear equations solved to obtain a static equilibrium state of an elastic structure. Preliminary numerical experiments illustrate that, compared with existing methods, the proposed method finds a reasonable solution even if data points distribute coarsely in a given material data set.