The flow past various mechanical cavity, which is a common structure on the surface of the underwater vehicle, and generating hydrodynamic noise has attracted considerable attention in recent years. In this paper, a h...The flow past various mechanical cavity, which is a common structure on the surface of the underwater vehicle, and generating hydrodynamic noise has attracted considerable attention in recent years. In this paper, a hybrid method is presented to investigate the hydrodynamic noise induced by mechanical cavities with various shapes. With this method, the noise sources in the near wall turbulences or in the wake are computed by the large eddy simulation （LES） and the generation and propagation of the acoustic waves are solved by the Ffowcs Williams-Hawkings （FW-H） acoustic analogy method with acoustic source terms extracted from the time-dependent solutions of the unsteady flow. The feasibility and reliability of the current method was verified by comparing with experimental data （Wang, 2009）. The 2D cavity models with different cross-section shapes and 3D cavity models with different cavity mouth shapes （rectangular and circular） are developed to study the influence of cavity shape on the hydrodynamic noise. By comparing the flow mechanisms, wall pressure fluctuations, near-field and far-field sound propagation distributions, it is found that the quadrangular cavity with equal depths of leading-edge and trailing-edge is preferred for its inducing lower hydrodynamic noise than the cylindrical cavity does.展开更多
Varieties of research on turbulent-induced noise are conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyse efficiently and accurately. Application of FW-H acoustic ...Varieties of research on turbulent-induced noise are conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyse efficiently and accurately. Application of FW-H acoustic analogy without turbulent noise is the most popular method due to its calculation cost. In this paper, turbulent-induced noise is predicted using RANS turbulence model and permeable FW-H method. For simplicity, noise from 2D cylinder is examined using three different methods: direct method of RANS, FW-H method without turbulent noise and permeable FW-H method which can take into account of turbulent-induced noise. Turbulent noise was well predicted using permeable FW-H method with same computational cost of original FW-H method. Also, ability of permeable FW-H method to predict highly accurate turbulent-induced noise by applying adequate permeable surface is presented. The procedure to predict turbulent- induced noise using permeable FW-H is established and its usability is shown.展开更多
The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation （LES） with the FW-H acoustic analogy and the other is the LES with the Powe...The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation （LES） with the FW-H acoustic analogy and the other is the LES with the Powell vortex sound theory, in order to compare the accuracies of their predictions. The vortical structures around the rod-airfoil are computed by the LES and captured by the vortex identification （Q）. The acoustic predictions are verified by the measurements. It is shown that the computed results by the two hybrid approa- ches （LES and FW-H, LES and Powell） are very similar. Both are shown to be satisfactory in the prediction of the noise generated by an unsteady flow. Subsequently, the numerical simulations of the wall pressure fluctuations and the flow-induced noise of a NACA0015 airfoil are made by the two hybrid approaches. At two angles of attack （ 0~ and 8~ ）, the wall pressure fluctuations of the NACA0015 airfoil are computed. The obtained power spectra of the wall pressure fluctuations are analyzed and compared with the measured data. And the vortical structures around the airfoil at two angles of attack are simulated and analyzed. After that, the flow induced noises of the NACA0015 airfoil at two angles of attack are predicted by the two hybrid approaches （LES and FW-H, LES and Powell）. The radiated sound spectra are analyzed and compared with the experimental data. Comparisons show that both are robust, credible and satisfactory in the numerical prediction of the flow induced noise. All numerical simulations are carried out by parallel processing in the Wuxi supercomputing center.展开更多
基金supported by the Key Program of National Natural Science Foundation of China (Grant No. 50835006)the National Science and Technology Major Project of China (Grant No. 2008ZX05027-004-03)
文摘The flow past various mechanical cavity, which is a common structure on the surface of the underwater vehicle, and generating hydrodynamic noise has attracted considerable attention in recent years. In this paper, a hybrid method is presented to investigate the hydrodynamic noise induced by mechanical cavities with various shapes. With this method, the noise sources in the near wall turbulences or in the wake are computed by the large eddy simulation （LES） and the generation and propagation of the acoustic waves are solved by the Ffowcs Williams-Hawkings （FW-H） acoustic analogy method with acoustic source terms extracted from the time-dependent solutions of the unsteady flow. The feasibility and reliability of the current method was verified by comparing with experimental data （Wang, 2009）. The 2D cavity models with different cross-section shapes and 3D cavity models with different cavity mouth shapes （rectangular and circular） are developed to study the influence of cavity shape on the hydrodynamic noise. By comparing the flow mechanisms, wall pressure fluctuations, near-field and far-field sound propagation distributions, it is found that the quadrangular cavity with equal depths of leading-edge and trailing-edge is preferred for its inducing lower hydrodynamic noise than the cylindrical cavity does.
文摘Varieties of research on turbulent-induced noise are conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyse efficiently and accurately. Application of FW-H acoustic analogy without turbulent noise is the most popular method due to its calculation cost. In this paper, turbulent-induced noise is predicted using RANS turbulence model and permeable FW-H method. For simplicity, noise from 2D cylinder is examined using three different methods: direct method of RANS, FW-H method without turbulent noise and permeable FW-H method which can take into account of turbulent-induced noise. Turbulent noise was well predicted using permeable FW-H method with same computational cost of original FW-H method. Also, ability of permeable FW-H method to predict highly accurate turbulent-induced noise by applying adequate permeable surface is presented. The procedure to predict turbulent- induced noise using permeable FW-H is established and its usability is shown.
文摘The sound generated by a NACA0012 airfoil in the wake of a rod is numerically simulated by two approaches, one is the large eddy simulation （LES） with the FW-H acoustic analogy and the other is the LES with the Powell vortex sound theory, in order to compare the accuracies of their predictions. The vortical structures around the rod-airfoil are computed by the LES and captured by the vortex identification （Q）. The acoustic predictions are verified by the measurements. It is shown that the computed results by the two hybrid approa- ches （LES and FW-H, LES and Powell） are very similar. Both are shown to be satisfactory in the prediction of the noise generated by an unsteady flow. Subsequently, the numerical simulations of the wall pressure fluctuations and the flow-induced noise of a NACA0015 airfoil are made by the two hybrid approaches. At two angles of attack （ 0~ and 8~ ）, the wall pressure fluctuations of the NACA0015 airfoil are computed. The obtained power spectra of the wall pressure fluctuations are analyzed and compared with the measured data. And the vortical structures around the airfoil at two angles of attack are simulated and analyzed. After that, the flow induced noises of the NACA0015 airfoil at two angles of attack are predicted by the two hybrid approaches （LES and FW-H, LES and Powell）. The radiated sound spectra are analyzed and compared with the experimental data. Comparisons show that both are robust, credible and satisfactory in the numerical prediction of the flow induced noise. All numerical simulations are carried out by parallel processing in the Wuxi supercomputing center.
