Rapid Measurement of Short Fiber Content on Hertel Sample

This paper offers a new method of measuring short fiber content of cotton fibers. The method is composed of two parts: one is Hertel sampling and the other is image testing. With the help of fiber mixer, a thin and even cotton net is obtained on which we can get Hertel sample by using a sliver clamp. The near micro optical mechanism consists of one large area CCD and one lens with long focus. This mechanism is able to measure every cotton fiber of the test beard accurately and makes it possible to measure accumulating fibers’ amounts. On this base we can calculate short fiber content of cotton, and the experiment results show that this method is efficient.

Effects of dietary fiber content and different fiber-rich ingredients on endogenous loss of fat and fatty acids in growing pigs

Background: Determination of the endogenous loss of fat(ELF) is used to adjust for the estimation of true total tract digestibility(TTTD) of fat in diets and ingredients.Any factor which affected ELF may further affect the digestibility of fat,including sources and concentrations of fat and fiber in the diet.There are some reports of determining the ELF using regression methods based on different levels of fat intake,while reports on effects of dietary fiber content and different fiber-rich ingredients in pig diets on ELF are very limited.Therefore,the objective of this study was to determine the effects of dietary fiber content and different fiber-rich ingredients on endogenous losses of fat and fatty acids at the end of ileum and throughout the entire intestinal tract in growing pigs.Methods: In Exp.1,the effect of fiber content on endogenous loss of fat was determined using six growing pigs(Duroc × Landrace × Yorkshire;27.6 ± 2.4 kg),fitted with a T-cannula at the end of ileum.The experimental design was a 6 × 6 complete Latin square design with six periods of feeding and six diets.The six experimental fat-free diets were formulated to include graded levels of neutral detergent fiber(NDF)(0,40,80,120,160 and 200 g/kg) and soybean hull(SH) was the only fiber source,providing 0,75,150,225,300 and 375 g/kg,respectively.Chromic oxide was included at4 g/kg in all diets as an indigestible marker.In Exp.2,six crossbred growing barrows(27.6 ± 1.6 kg) were used and the experimental design was the same as for Exp.1.The six fat-free diets were formulated to include six common fiber-rich ingredients and the concentration of NDF was 100 g/kg.The six fiber-rich ingredients were defatted rice bran(DRB),sugar beet pulp(SBP),rice hull(RH),corn germ meal(CGM),SH and wheat bran(WB) and they were fed at represented250,270,145,250,170 and 280 g/kg in the diet,respectively.Results: In Exp.1,the endogenous loss of fatty acids profile did not change as dietary NDF increased in growing pigs.The endogenous losses of fat,C16:0,C18:0,C18:1,C18:2,total unsaturated fatty acids(UFA) and total saturated fatty acids(SFA) in growing pigs at the end of ileum and throughout the entire intestinal tract increased linearly as NDF content of diets increased.The endogenous losses of fat,as well as C16:0 and C18:0 throughout the entire intestinal tract also increased quadratically as NDF content of diets increased.The ELF increased from 0.71 to 3.14 g/kg of dry matter intake(DMI) and 0.56 to 8.21 g/kg DMI at the end of ileum and throughout the entire intestinal tract in growing pigs,respectively.The ELF occurred in the hindgut except for the growing pigs fed 0 and 4% NDF in their diets.The endogenous losses of C16:0 and UFA occurred primarily in the upper regions of the gut and the greatest endogenous losses of C18:0 occurred in the hindgut.The endogenous losses of fat,individual SFA and total SFA throughout the entire intestinal tract were much greater than that at the end of ileum.However,the endogenous losses of individual UFA and total UFA were less throughout the intestinal tract than at the end of ileum.In Exp.2,the endogenous losses of fat at the end of ileum were greater in growing pigs fed CGM or WB diets.The endogenous loss of fatty acids profile changed to a slight degree at the end of ileum that the endogenous loss of UFA(particularly C18:1 and C18:2) in growing pigs fed CGM or WB diets were greater(P < 0.01) than that for the other four diets.The greatest(P < 0.01) endogenous loss of SFA(particularly C18:0) was in growing pigs fed the RH diet.The endogenous losses of fat,C16:0,C18:0 and SFA over the entire intestinal tract were much greater in growing pigs fed CGM or WB diets,whereas the lowest values were in growing pigs fed DRB diet.The ELF at the end of ileum in growing pigs fed CGM or WB diets were 3.50 or 4.17 g/kg DMI,respectively,and the ELF over the entire intestinal tract was 7.23 or 7.38 g/kg DMI.The contribution in percentage of ELF in the upper gut was greater than that in the hindgut of growing pigs fed DRB and RH diets,while the ELF in the upper gut and hindgut were equal in growing pigs fed SBP,CGM and WB diets.On the whole,the endogenous losses of C18:1 and C18:2 throughout the entire intestinal tract in growing pigs fed the six fiber-rich ingredients diets were less than losses at the end of ileum,whereas the endogenous loss of fat,C16:0,C18:0 and SFA were greater throughout the intestinal tract than at the end of ileum.Conclusion: The profile of loss in endogenous fatty acids did not change as dietary NDF increased in growing pigs and the endogenous losses of fatty acids(C16:0,C18:0,C18:1 and C18:2) fat,UFA and SFA increased linearly as NDF content increased in the diets of pigs.The endogenous losses of fat or fatty acids at the end of ileum were greater in growing pigs fed RH,CGM or WB diets.The endogenous losses of fat,fatty acids(C16:0 and C18:0) and SFA were greater over the entire intestinal tract in pigs fed CGM or WB diet,while these values were the lowest in growing pigs fed the DRB diet.The contribution in percentage losses of fat in the upper gut were greater than in the hindgut of growing pigs fed DRB and RH diets,while the contribution of losses of fat in the upper gut and hindgut were equal in growing pigs fed SBP,CGM and WB diets.In addition,the endogenous loss of individual or total UFA was less over the entire intestinal tract of growing pigs fed fiber diets than that at the end of ileum,and the greatest endogenous losses of fat,individual or total SFA were over the entire intestinal tract.Therefore,differences in fiber content and the nature of fiber-rich ingredients in diets of pigs have different effects to the endogenous losses of fat or fatty acids.Considering the requirement of fat or fatty acids of pigs,careful attention must be paid that the endogenous losses of fat and fatty acids when fiber ingredients are used in diets of pigs.

Damage Processes of Polypropylene Fiber Reinforced Mortar in Different Fiber Content Revealed by Acoustic Emission Behavior

The performances of the cement-based materials can be improved by the incorporation of polypropylene fiber, but the damage processes become more complex with different fiber contents at the same time. The acoustic emission（AE） technology can achieve the global monitoring of internal damage in materials. The evolution process of failure mode and damage degree of polypropylene fiber reinforced mortar and concrete were analyzed by measuring the AE energy, RA value, AF value and b value. It was found that the cement matrix cracked on the initial stage, the cracks further developed on the medium stage and the fibers were pulled out on the last stage. The matrix cracked with minor injury cracks, but the fiber broke with serious damage cracks. The cumulative AE energy was proportional to the polypropylene fiber reinforced concrete and mortar＇s ductility. The damage mode and damage degree can be judged by identifying the damage stage obtained by the analysis of the AF value.

Root tensile strength of terrace hedgerow plants in the karst trough valleys of SW China:Relation with root morphology and fiber content

Root tensile strength is commonly affected by root morphology and fiber content,which combinedly affect the effectiveness of terrace hedgerow on controlling soil erosion in sloping farmland.However,the relationships between these root characteristics are still elusive.This study aimed to compare the root tensile strength,root morphologies,and root fiber contents,and quantify their differences among different plant species.Complete root systems of three terrace hedgerow plant species,i.e.,O.bodinieri,V.villosa,and D.lablab L.were sampled for detecting root morphologies and fiber contents at different slope positions on a representative hillslope in karst trough valley.Single root specimens were collected to measure root tensile properties for these three plant species.Results showed that most root morphological parameters were the highest in O.bodinieri,followed by D.lablab L.Three plant species presented the same dominant diameter class as<1.0 mm,and root volumes as<1.50 cm3.Cellulose with contents closing to 50%was the main fiber type,and increased significantly linearly with the increasing root diameter in both O.bodinieri and V.villosa.The highest tensile strength and Young's modulus were found in D.lablab L.,while the best ultimate tensile force and ultimate elongation were displayed in O.bodinieri.Root diameter showed negative power relationships with tensile strength and Young's modulus,a positive power relationship with ultimate tensile force,and a positive linear relationship with ultimate elongation.Our results will deepen the understanding of the terrace hedgerow functions for controlling soil erosion worldwide.

Experimental and numerical analyses of the effect of fibre content on the close-in blast performance of a UHPFRC beam

Limited research has been conducted on the influences of fiber content on close-in blasting characteristics for ultrahigh-performance fiber-reinforced concrete(UHPFRC)beams.This paper aims to address this knowledge gap through experimental and mesoscale numerical methods.Experiments were conducted on ten UHPFRC beams built with varying steel fiber volumetric fractions subjected to close-in explosive conditions.Additionally,this study considered other parameters,such as the longitudinal reinforcement type and ratio.In the case of UHPFRC beams featuring normal-strength longitudinal reinforcement of diametersΦ12,Φ16,andΦ20,a reduction in maximum displacement by magnitudes of19.6%,19.5%,and 17.4%was observed,respectively,as the volumetric fractions of fiber increased from1.0%to 2.5%.In addition,increasing the longitudinal reinforcement ratio and using high-strength steel longitudinal reinforcement both significantly reduced the deformation characteristics and increase the blasting resistances of UHPFRC beams.However,the effects on the local crushing and spalling damage were not significant.A mesoscale finite element model,which considers the impacts of fiber parameters on UHPFRC beam behaviors,was also established and well correlated with the test findings.Nevertheless,parametric analyses were further conducted to examine the impacts of the steel fiber content and length and the hybrid effects of various types of microfibers and steel fibers on the blasting performance of UHPFRC beams.

Effect of sex and rearing system on the quality and mineral content of fiber from raeini cashmere goats

The aim of this study was to compare the quality characteristics and mineral content of the fiber from male and female cashmere goats raised under different management systems. Male and female Raeini cashmere goats （〈1.5 years of age, n=48） were selected from flocks raised at a government breeding station or raised commercially under either rural or nomadic conditions. The staple length, cashmere fiber diameter, coefficient of variation for fiber diameter, percentage of cashmere in a fleece, percentage of guard hair in a fleece and cashmere tenacity averaged 4.6 ±0.1 cm, 18.0 ±0.1 um, 20.9±0.4%, 66.1 ± 1.5%, 33.8± 1.5% and 1.8±0.2 gf/tex, respectively. The sulfur, copper and zinc content of the cashmere averaged 2.8 ± 0.1%, 0.00065 ± 0.00002% and 0.01276 ± 0.00025%, respectively. Rearing method significantly affected staple length, coefficient of variation of fiber diameter, cashmere tenacity and copper content. Males had a higher coefficient of variation of fiber diameter and cashmere tenacity than females （P 〈 0.05）.

Effect of oxygen content on tensile strength of polymer-derived SiC fibers

Air-curing is usually applied to the polymer-derived SiC fibers and, as a result, oxygen is embedded to the material. An effective relationship between oxygen content of the SiC fibers and mass gain of their precursor fibers was established. Results also showed that oxygen content has a great influence on the mechanical properties and excellent tensile strength is usually obtained at the oxygen content of 12%～13%, similar to the density of SiC fibers. Oxygen content has a positive effect on the ceramic yield, and thus, is good to the density and tensile strength; while, oxygen content is also negative to volume content of SiC phase and crystallization of the SiC fibers, and thus, detrimental to the density and tensile strength. Both of the two effects result in the peak behavior of the tensile strength of SiC fibers.

Influence of Water Content on Conductivity and Piezoresistivity of Cement-based Material with both Carbon Fiber and Carbon Black

The influence of water content on the conductivity and piezoresistivity of cement-based material with carbon fiber （CF） and carbon black （CB） was investigated. The piezoresistivity of cement-based material with both CF and CB was compared with that of cement-based material with CF only, and the changes in electrical resistivity of cement-based material with both CF and CB under static and loading conditions in different drying and soaking time were studied. It is found that the piezoresistivity of cement-based material with both CF and CB has better repeatability and linearity than that of cement-based material with CF only. The conductivity and the sensitivity of piezoresistive cement-based material with both CF and CB are enhanced as the water content in piezoresistive cement-based material increases.

A distributed measurement method for in-situ soil moisture content by using carbon-fiber heated cable

Moisture content is a fundamental physical index that quantifies soil property and is closely associatedwith the hydrological, ecological and engineering behaviors of soil. To measure in-situ soil moisturecontents, a distributed measurement system for in-situ soil moisture content （SM-DTS） is introduced.The system is based on carbon-fiber heated cable （CFHC） technology that has been developed to enhancethe measuring accuracy of in-situ soil moisture content. Using CFHC technique, a temperature characteristicvalue （Tt） can be defined from temperatureetime curves. A relationship among Tt, soil thermalimpedance coefficient and soil moisture content is then established in laboratory. The feasibility of theSM-DTS technology to provide distributed measurements of in-situ soil moisture content is verifiedthrough field tests. The research reported herein indicates that the proposed SM-DTS is capable ofmeasuring in-situ soil moisture content over long distances and large areas.

Nitrogen and fiber concentration in rumen contents and fecescontents of Mongolian gazelles

Fecal indicators of nutritional status of wild ungulates were less constrained than that of blood, rumen contents, or urine analyses. Thus, we compared the nitrogen and fiber concentrations of feces with those of the rumen contents of Mongolian gazelles (Procapra guttrurosa) in Hulunbeier Grassland. Rumen contents and fecal nutritional concentrations varied in different seasons. Dietary nitrogen concentrations only increased linearly with increase nitrogen concentration in fecal in winter. There was a positive correlation between rumen NDF (neutral detergent fiber) and fecal NDF concentrations. But the regression coefficient was small (r=0.3917). There was a significant regression equation between rumen contents ADF (acid detergent fiber) and fecal ADF concentrations,as well as ADL (acid detergent lignin) concentrations. Nitrogen concentration was found to be negatively correlated with NDF ADF and ADL concentrations both in rumen and in fecal compositions. Our data suggest that fecal nitrogen, ADF ADL concentrations may assess winter dietary qualities that are in protein, crude fiber and lignin concentrations for Mongolian gazelles.

Mechanical Characterization of Rubber Latex-Based Carpets (Hevea bresiliensis): Influence of Rubber Latex Content and Fiber Fabrics (Cotton and Mosquito Nets) on Wear Resistance of Rubber Latex-Based Carpets

This work focuses on the development of carpets from sand, fabrics of cotton fiber and mosquito nets and rubber latex. Following a study on the choice of the best formulations, the quantity of rubber latex used for shaping varies between 14% and 18% (latex/sand + latex ratio) for the carpet with the fabric of mosquito nets and between 16% and 18% for the one made with the fabric of cotton fiber. Thus, with a mixture of sand, fiber fabrics (cotton and mosquito nets) and rubber latex, carpets were developed. In addition, the wear test carried out on these samples indicates that it is possible to produce carpets with the new material made of rubber sand and latex: SABLATEX At room temperature. Following the characterization test, it resorts to only 16% latex with cotton fiber fabric, allowing to have carpets with good mechanical characteristics.

Experimental study on mechanical properties of basalt fiber-reinforced silty clay

Fiber reinforcement technology can significantly improve the mechanical properties of soil and has been increasingly applied in geotechnical engineering.Basalt fiber is a new kind of environment-friendly and highperformance soil reinforcement material,and the mechanical properties of basalt fiber-reinforced soil have become a hot research topic.In this paper,we conducted monotonic triaxial and cyclic triaxial tests,and analyzed the influence of the fiber content,moisture content,and confining pressure on the shear characteristics,dynamic modulus,and damping ratio of basalt fiber-reinforced silty clay.The results illustrate that basalt fiber can enhance the shear strength of silty clay by increasing its cohesion.We find that the shear strength of reinforced silty clay reaches its maximum when the fiber content is approximately 0.2%and the moisture content is 18.5%(optimum moisture content).Similarly,we also find that the dynamic modulus that corresponds to the same strain first increases then decreases with increasing fiber content and moisture content and reaches its maximum when the fiber content is approximately 0.2%and the moisture content is 18.5%.The dynamic modulus is positively correlated with the confining pressure.However,the change in the damping ratio with fiber content,moisture content,and confining pressure is opposite to that of the dynamic modulus.It can be concluded that the optimum content of basalt fiber for use in silty clay is 0.2%.After our experiments,we used scanning electron microscope(SEM)to observe the microstructure of specimens with different fiber contents,and our results show that the gripping effect and binding effect are the main mechanisms of fiber reinforcement.

Theoretical Optimization of the Production of Heating Layers Using Local Wool Fibers

Science is the basis of the country’s development and wealth. In particular, it is necessary to effectively use advanced scientific developments and technical achievements in order to strengthen the economy in the period when the desire for innovation in all fields is still growing. In theoretical-experimental Scientific Research work, both theoretical and experimental results are achieved, and it is more useful to withstand more theoretical-experimental loads for a longer period of time. The occurrences in the production process of natural wool fiber technologists are a complex of physical and mechanical phenomena, which can be used only by the modern achievements of science and technology. In most cases, the parameter relationship with the factors influencing the technological process or the object can open a curve without any other things.

Analysis of Microstructure of Silicon Carbide Fiber by Raman Spectroscopy

The SiC fiber was prepared by chemical vapour depostion, which consists of tungsten core, SiC layer and carbon coating. The microstructure of the fiber was investigated using Raman spectroscopy, illustrating SiC variation in different region of the fiber. The result shows that the SiC layer can be subdivided into two parts in the morphologies of SiC grains; their sizes increase and their orientations become order with increasing distance from the fiber center. It is demonstrated that the mount of free carbon in the fiber is responsible for the variation of SiC grains in sizes and morphologies. The analysis of Raman spectra shows that the predominant β-SiC has extensive stacking faults within the crystallites and mixes other polytypes and amorphous SiC into the structure in the fiber.

Performance evaluation of two types of heated cables for distributedtemperature sensing-based measurement of soil moisture content

Distributed temperature sensing(DTS)using heated cables has been recently developed for distributed monitoring of in-situ soil moisture content.In this method,the thermal and electrical properties of heated cables have a significant influence on the measurement accuracy of soil moisture content.In this paper,the performances of two heated cables,i.e.the carbon-fiber heated cable(CFHC)and the metalnet heated cable(MNHC),are studied in the laboratory.Their structures,uniformity in the axial direction,measurement accuracy and suitability are evaluated.The test results indicate that the MNHC has a better uniformity in the axial direction than CFHC.Both CFHC and MNHC have high measurement accuracy.The CFHC is more suitable for short-distance measurement(500 m),while the MNHC can be used for longdistance measurement(>500 m).

Effect of Waste Paper Fiber on Properties of Cementbased Mortar and Relative Mechanism

The aim of this work was to investigate the effect of waste paper fiber on the properties of cement-based mortar and the relative mechanism. The cement-based mortars with various contents and mixing way of waste paper fibers were prepared and the slump flow, setting time and strength developments of all mortars were tested. Besides, Ca（OH）_2 content in hardened pastes at different ages and the microstructures of all mortar at 90 d were observed by scanning electron microscopy. The experimental results showed that in the process of mixing, more superplastizier was consumed to maintain the workability because of the absorption of water and superplastizer on waste paper fiber. With more waste paper fiber being added, longer setting time is available for the pastes with it because of the carbohydrate dissolving and its retarding to the cement hydration. Waste paper fiber is adverse to the early and later strength of cement-based mortar, but it increases the mortar strengths at 7 and 28 d. The strength, Ca（OH）_2 content and microstructure are related to the content and mixing way of waste paper fiber. Waste paper fiber helps produce the Ca（OH）_2 at 7 and 28 d, but this case is reverse at ages of 1 and 3 d. Overall, waste paper fiber leads to the appearance of more pores in the hardened paste. However, it increases the toughness of cement-based mortar.

玄武岩-聚乙烯醇纤维对再生混凝土抗冻性能的影响

为了推广再生混凝土在高海拔和北方寒冷地区的应用,对单掺、混掺不同体积掺量玄武岩纤维和聚乙烯醇纤维的再生混凝土进行质量损失率、相对动弹性模量、抗压强度损失率3项抗冻性能指标的探究,并用SEM对200次冻融循环后混掺纤维再生混凝土进行细观作用机理分析,最后结合响应面法对混掺纤维掺量进行优选。结果显示:外掺纤维能够提高再生混凝土的抗冻性能,而混掺纤维效果优于单掺纤维;2种纤维在试件内部呈网状分布,协同受力,与基体互相约束,很大程度限制了裂缝的扩展和数量;纤维优化结果显示当聚乙烯醇纤维与玄武岩体积掺量分别为0.170%和0.246%时,再生混凝土的抗冻性能最优。研究成果对玄武岩-聚乙烯醇纤维再生混凝土纤维掺量设计具有一定的借鉴意义。

Effect of steam pretreatment on wood moisture content and characteristics of vacuum drying

The effects of high temperature steam pretreatment on the change in wood moisture content （MC） and characteristics of vacuum drying were investigated in this study. Poplar and manchurian walnut woods were pretreated with high temperature steam at 100~C and 140~C, prior to vacuum drying. A comparison of the characteristics of vacuum drying between steam pretreated wood and untreated wood was carried out. The results show that during steam pretreatment, the MC of wood decreased within a few hours. The reduction of MC varied with the temperature; the higher the temperature, the faster the MC dropped. During the vacuum drying stage, the rates of drying ofpretreated samples were higher than those of untreated samples when MC was below the fiber saturation point. Furthermore, the total drying time of samples treated at a steam temperature of 140~C was lower than that of untreated samples. Therefore, a vacuum procedure after steam pretreatment can effectively shorten the drying time when drying wood.

部分充填式窄幅钢箱-UHPC组合梁抗剪试验研究

目的为研究部分充填式窄幅钢箱-UHPC组合梁的抗剪性能,方法对4根倒置组合梁试件通过三点加载方式进行了静载试验,通过研究其负弯矩作用下的破坏形态及变形特征,得到了组合梁的荷载-挠度曲线、应变分布、荷载-滑移曲线、最终破坏形态等。结果试验研究结果表明:UHPC翼板显著提升了组合梁的变形能力和极限承载力;相较于试件SUCB-3(NC翼板),试件SUCB-1(1/2UHPC翼板和SUCB-4(全UHPC翼板))的承载力分别提高了18.2%和27.3%,变形能力则分别增强了38.02%和41.2%;钢纤维的添加能有效地抑制翼板裂缝的开展,钢纤维掺量从0提高到2%,试件的最大裂缝宽度从1.06 mm降低到0.92 mm,变形能力增强了23.61%,承载力则提高了4%。结论提出了考虑钢箱、UHPC翼板和充填混凝土贡献的组合梁抗剪承载力计算公式。

Change and Redistribution of Immature Fiber Number during Cotton Carding Based on Different Taker-in Speeds

The change and redistribution of immature fiber number after cotton carding were investigated under different taker-in speeds.The immature fiber contents (IFCs) of card sliver,flat strips,takerin droppings and cylinder screen droppings (including droppings under cylinder screen and cylinder-doffer triangle section) produced under different taker-in speeds were tested by using USTER advanced fiber information system (AFIS). Based on these results and relevant data,immature fiber number was calculated. Results show that the carding process makes the immature fiber number increase. After carding, immature fibers are distributed mainly in card sliver,accounting for approximately 90% in their total number. All of the cylinder screen,taker-in and flat have the functions of excluding immature fibers; furthermore,IFC in cylinder screen droppings is the highest,followed successively by those in taker-in droppings,flat strips and card sliver. The IFC of card sliver is the lowest when the taker-in speeds are 1000 and 1400 r/min.