Hypersonic boundary-layer transition on a flared cone

Transition on a flared cone with zero angle of at- tack was studied in our newly established Mach 6 quiet wind tunnel （M6QT） via wall pressure measurement and flow visualization. High-frequency pressure transducers were used to measure the second-mode waves＇ amplitudes and frequencies. Using pulsed schlieren diagnostic and Rayleigh scattering technique, we got a clear evolution of the second-mode disturbances. The second-mode waves exist for a long distance, which means that the second-mode waves grow linearly in a large region. Strong Mach waves are radiated from the edge of the boundary layer. With further development, the second-mode waves reach their maximum magnitude and harmonics of the second-mode instability appear. Then the disturbances grow nonlinearly. The second modes become weak and merge with each other. Finally, the nonlinear interaction of disturbance leads to a relatively quiet zone, which further breaks down, resulting in the transition of the bound- ary layer. Our results show that transition is determined by the second mode. The quiet zone before the final breakdown is observed in flow visualization for the first time. Eventual transition requires the presence of a quiet zone generated by nonlinear interactions.

Effect of restoration technique on resistance to fracture of endodontically treated anterior teeth with flared root canals

This study was designed to compare the impact of post and core systems on resistance to fracture of endodontically treated anterior teeth with flared root canals and to assess their fracture pattern. Sixty central incisors were cut horizontally 2 mm coronal to the cementoenamel junction(CEJ). After root canal therapy, teeth were assigned into 6 groups(n = 10 each) based on a post system and used as follows: Group C, non-flared root received size #1 glass fiber posts(Control); Group AP, flared root restored with anatomical post; Group RC, flared root restored with size #1 fiber post and cemented with thick layer of resin cement; Group CR, flared root restored with size #1 and reinforced with composite resin; Group CM, cast post-core; Group CP, CAD/CAM polymer-infiltrated ceramic post and core.Following post cementation, core build-up and crown insertion, the specimens were thermo-cycled up to 10,000 cycles(5 C/55 C; 30 seconds dwell time, 6 seconds transition time) and then statically loaded at 1 mm/minute crosshead speed using a universal testing machine. One-way ANOVA and Tukey HSD post hoc test(α= 0.05) were used for data analysis. Group C recorded significantly higher resistance to fracture values [(826.9±39.1) N] followed by group CP [(793.8±55.6) N] while group RC yielded the lowest fracture resistance values [(586.7±51.4) N]. The resistance to fracture of wide root canals can be enhanced by using one-piece CAM/CAM post and core as an alternative to the use of either glass fiber post, relined with composite resin increasing the thickness of luting cement or the use of cast post and core system. However, this was an in vitro investigation and further in vivo studies are necessary.

Fully nonlinear modeling of radiated waves generated by floating flared structures

The nonlinear radiated waves generated by a structure in forced motion, are simulated numerically based on the potential theory. A fully nonlinear numerical model is developed by using a higher-order boundary element method （HOBEM）. In this model, the instantaneous body position and the transient free surface are updated at each time step. A Lagrangian technique is employed as the time marching scheme on the free surface. The mesh regridding and interpolation methods are adopted to deal with the possible numerical instability. Several auxiliary functions are proposed to calculate the wave loads indirectly, instead of directly predicting the temporal derivative of the velocity potential. Numerical experiments are carried out to simulate the heave motions of a submerged sphere in infinite water depth, the heave and pitch motions of a truncated flared cylinder in finite depth. The results are verified against the published numerical results to ensure the effectiveness of the proposed model. Moreover, a series of higher harmonic waves and force components are obtained by the Fourier transformation to investigate the nonlinear effect of oscillation frequency. The difference among fully nonlinear, body-nonlinear and linear results is analyzed. It is found that the nonlinearity due to free surface and body surface has significant influences on the numerical results of the radiated waves and forces.

Investigation of the self-induced magnetic field characteristics in a pulsed plasma thruster with flared electrodes

The self-induced magnetic field in a pulsed plasma thruster(PPT)with flared electrodes is investigated for a better understanding of the working process and the structural design of the thruster.A two-dimensional model of the magnetic field is built and is validated by comparing the simulated results with the experimental results in literature.The magnetic flux density in the discharge channel during the working process is presented and analyzed regarding the electrode structures.The calculated magnetic field flux density decreases from 0.8 T at the upstream to 0.1 T and below at the downstream in the discharge channel(68 J).The peak of the magnetic flux density over time lags behind the current peak,which provides evidence for the existence of a moving plasma sheet in the discharge process.The magnetic field induced by the current in the extra bending part of the anode enhances the Lorentz force,which acts on the charged particles near the propellant.Finally,the geometric study indicates that the electromagnetic impulse bit does not monotonically increase with the flared angle of the electrodes.Instead,it reaches a maximum at a certain flared angle,which could provide significant suggestions for structural optimization.

Three-dimensional atomic force microscopy based on tailored cantilever probe with flared tip

In order to meet the requirements of nondestructive testing of true 3D topography of micro-nano structures,a novel three-dimensional atomic force microscope(3D-AFM)based on flared tip is developed.A high-precision scanning platform is designed to achieve fast servo through moving probe and sample simultaneously,and several combined nanopositioning stages are used to guarantee linearity and orthogonality of displacement.To eliminate the signal deviation caused by AFM-head movement,a traceable optical lever system is designed for cantilever deformation detection.In addition,a method of tailoring the cantilever of commercial probe with flared tip is proposed to reduce the lateral force applied on the tip in measurement.The tailored probe is mounted on the 3D-AFM,and 3D imaging experiments are conducted on different samples by use of adaptive-angle scanning strategy.The results show the roob-mean-square value of the vertical displacement noise(RMS)of the prototype is less than 0.1 nm and the high/width measurement repeatability(peak-to-peak)is less than 2.5 nm.

Sunspot Group Detection and Classification by Dual Stream Convolutional Neural Network Method

The automatic detection and analysis of sunspots play a crucial role in understanding solar dynamics and predicting space weather events.This paper proposes a novel method for sunspot group detection and classification called the dual stream Convolutional Neural Network with Attention Mechanism(DSCNN-AM).The network consists of two parallel streams each processing different input data allowing for joint processing of spatial and temporal information while classifying sunspots.It takes in the white light images as well as the corresponding magnetic images that reveal both the optical and magnetic features of sunspots.The extracted features are then fused and processed by fully connected layers to perform detection and classification.The attention mechanism is further integrated to address the“edge dimming”problem which improves the model’s ability to handle sunspots near the edge of the solar disk.The network is trained and tested on the SOLAR-STORM1 data set.The results demonstrate that the DSCNN-AM achieves superior performance compared to existing methods,with a total accuracy exceeding 90%.

Observation and Analysis of VLF Nocturnal Multimode Interference Phenomenon based on Waveguide Mode Theory

Very low frequency(VLF)signals are propagated between the ground-ionosphere.Multimode interference will cause the phase to show oscillatory changes with distance while propagating at night,leading to abnormalities in the received VLF signal.This study uses the VLF signal received in Qingdao City,Shandong Province,from the Russian Alpha navigation system to explore the multimode interference problem of VLF signal propagation.The characteristics of the effect of multimode interference phenomena on the phase are analyzed according to the variation of the phase of the VLF signal.However,the phase of VLF signals will also be affected by the X-ray and energetic particles that are released during the eruption of solar flares,therefore the two phenomena are studied in this work.It is concluded that the X-ray will not affect the phase of VLF signals at night,but the energetic particles will affect the phase change,and the influence of energetic particles should be excluded in the study of multimode interference phenomena.Using VLF signals for navigation positioning in degraded or unavailable GPS conditions is of great practical significance for VLF navigation systems as it can avoid the influence of multimode interference and improve positioning accuracy.

Observation of Standing Slow Magneto-acoustic Waves in a Flaring Active Region Corona Loop

Intensity fluctuations are frequently observed in different regions and structures of the solar corona.These fluctuations may be caused by magneto-hydrodynamic(MHD)waves in coronal plasma.MHD waves are prime candidates for the dynamics,energy transfer,and anomalous temperature of the solar corona.In this paper,analysis is conducted on intensity and temperature fluctuations along the active region coronal loop(NOAA AR 13599)near solar flares.The intensity and temperature as functions of time and distance along the loop are extracted using images captured by the Atmospheric Imaging Assembly(AIA)instrument onboard the Solar Dynamics Observatory(SDO)space telescope.To observe and comprehend the causes of intensity and temperature fluctuations,after conducting initial processing,and applying spatial and temporal frequency filters to data,enhanced distance-time maps of these variables are drawn.The space-time maps of intensities show standing oscillations at wavelengths of 171,193,and 211A with greater precision and clarity than earlier findings.The amplitude of these standing oscillations(waves)decreases and increases over time.The average values of the oscillation period,damping time,damping quality,projected wavelength,and projected phase speed of standing intensity oscillations are in the range of 15-18 minutes,24-31 minutes,1.46″-2″,132″-134″,and 81-100 km s^(-1),respectively.Also,the differential emission measure peak temperature values along the loop are found in the range of 0.51-3.98 MK,using six AIA passbands,including 94,131,171,193,211,and 335?.Based on the values of oscillation periods,phase speeds,damping time,and damping quality,it is inferred that the fluctuations in intensity are related to standing slow magneto-acoustic waves with weak damping.

Inverse Calculation and Regularization Process for the Solar Aspect System(SAS) of HXI Payload on ASO-S Spacecraft

For the ASO-S/HXI payload, the accuracy of the flare reconstruction is reliant on important factors such as the alignment of the dual grating and the precise measurement of observation orientation. To guarantee optimal functionality of the instrument throughout its life cycle, the Solar Aspect System (SAS) is imperative to ensure that measurements are accurate and reliable. This is achieved by capturing the target motion and utilizing a physical model-based inversion algorithm. However, the SAS optical system’s inversion model is a typical ill-posed inverse problem due to its optical parameters, which results in small target sampling errors triggering unacceptable shifts in the solution. To enhance inversion accuracy and make it more robust against observation errors, we suggest dividing the inversion operation into two stages based on the SAS spot motion model. First, the as-rigid-aspossible (ARAP) transformation algorithm calculates the relative rotations and an intermediate variable between the substrates. Second, we solve an inversion linear equation for the relative translation of the substrates, the offset of the optical axes, and the observation orientation. To address the ill-posed challenge, the Tikhonov method grounded on the discrepancy criterion and the maximum a posteriori (MAP) method founded on the Bayesian framework are utilized. The simulation results exhibit that the ARAP method achieves a solution with a rotational error of roughly±3 5 (1/2-quantile);both regularization techniques are successful in enhancing the stability of the solution, the variance of error in the MAP method is even smaller—it achieves a translational error of approximately±18μm (1/2-quantile) in comparison to the Tikhonov method’s error of around±24μm (1/2-quantile). Furthermore, the SAS practical application data indicates the method’s usability in this study. Lastly, this paper discusses the intrinsic interconnections between the regularization methods.

The Evolution of Photospheric Current Density During an X9.3-Class Solar Flare

This paper deduced the temporal evolution of the magnetic field through a series of high-resolution vector magnetograms and calculated the fine distribution map of current density during an X9.3-class flare eruptions using Ampère's law.The results show that a pair of conjugate current ribbons exist on both sides of the magnetic neutral line in this active region,and these conjugate current ribbons persist before,during,and after the flare.It was observed that the X9.3-class flare brightened in the form of a bright core and evolved into a double-ribbon flare over time.Importantly,the position of the double-ribbon flare matches the position of the current ribbons with high accuracy,and their morphologies are very similar.By investigating the complexity of current density and flare morphology,we discovered a potential connection between the eruption of major flares and the characteristics of current density.

A Statistical Study of Magnetic Flux Emergence in Solar Active Regions Prior to Strongest Flares

Using the data on magnetic field maps and continuum intensity for Solar Cycles 23 and 24,we explored 100 active regions(ARs)that produced M5.0 or stronger flares.We focus on the presence/absence of the emergence of magnetic flux in these ARs 2-3 days before the strong flare onset.We found that 29 ARs in the sample emerged monotonically amidst quiet-Sun.A major emergence of a new magnetic flux within a pre-existing AR yielding the formation of a complex flare-productive configuration was observed in another 24 cases.For 30 ARs,an insignificant(in terms of the total magnetic flux of pre-existing AR)emergence of a new magnetic flux within the pre-existing magnetic configuration was observed;for some of them the emergence resulted in a formation of a configuration with a small δ-sunspot;11 out of 100 ARs exhibited no signatures of magnetic flux emergence during the entire interval of observation.In six cases the emergence was in progress when the AR appeared on the Eastern limb,so that the classification and timing of emergence were not possible.We conclude that the recent flux emergence is not a necessary and/or sufficient condition for strong flaring of an AR.The flux emergence rate of flare-productive ARs analyzed here was compared with that of flare-quiet ARs analyzed in our previous studies.We revealed that the flare-productive ARs tend to display faster emergence than the flare-quiet ones do.

A Confined Two-peaked Solar Flare Observed by EAST and SDO

The solar flare is one of the most violent explosions,and can disturb the near-Earth space weather.Except for commonly single-peaked solar flares in soft X-ray,some special flares show intriguing a two-peak feature that is deserved much more attentions.Here,we reported a confined two-peaked solar flare and analyzed the associated eruptions using high-quality observations from Educational Adaptive-optics Solar Telescope and Solar Dynamics Observatory.Before the flare,a magnetic flux rope(MFR)formed through partially tether-cutting reconnection between two sheared arches.The flare occurred after the MFR eruption that was confined by the overlying strong field.Interestingly,a small underlying filament immediately erupted,which was possibly destabilized by the flare ribbon.The successive eruptions were confirmed by the analysis of the emission measure and the reconnection fluxes.Therefore,we suggest that the two peaks of the confined solar flare are corresponding to two episodes of magnetic reconnection during the successive eruptions of the MFR and the underlying filament.

The Dependence between Solar Flare Emergence and the Average Background Solar X-Ray Flux Emission

Solar flares, sudden bursts of intense electromagnetic radiation from the Sun, can significantly disrupt technological infrastructure, including communication and navigation satellites. To mitigate these risks, accurate forecasting of solar activity is crucial. This study investigates the potential of the Sun’s background X-ray flux as a tool for predicting solar flares. We analyzed data collected by solar telescopes and satellites between the years 2013 and 2023, focusing on the duration, frequency, and intensity of solar flares. We compared these characteristics with the background X-ray flux at the time of each flare event. Our analysis employed statistical methods to identify potential correlations between these solar phenomena. The key finding of this study reveals a significant positive correlation between solar flare activity and the Sun’s background X-ray flux. This suggests that these phenomena are interconnected within the framework of overall solar activity. We observed a clear trend: periods with increased occurrences of solar flares coincided with elevated background flux levels. This finding has the potential to improve solar activity forecasting. By monitoring background flux variations, we may be able to develop a more effective early warning system for potentially disruptive solar flares. This research contributes to a deeper understanding of the complex relationship between solar flares and the Sun’s overall radiative output. These findings indicate that lower-resolution X-ray sensors can be a valuable tool for identifying periods of increased solar activity by allowing us to monitor background flux variations. A more affordable approach to solar activity monitoring is advised.

Statistical Study of the Geoeffectivity of Halo Coronal Mass Ejections Associated with X-Class Flares during Solar Cycles 23 and 24

By analysing a long series of data (1996-2019), we show that solar cycle 23 was more marked by violent solar flares and coronal mass ejections (CMEs) compared to solar cycle 24. In particular, the halo coronal mass ejections associated with X-class flares appear to be among the most energetic events in solar activity given the size of the flares, the speed of the CMEs and the intense geomagnetic storms they produce. Out of eighty-six (86) X-class halo CMEs, thirty-seven (37) or 43% are highly geoeffective;twenty-four (24) or approximately 28% are moderately geoeffective and twenty-five (25) or 29% are not geoeffective. Over the two solar cycles (1996 to 2019), 71% of storms were geoeffective and 29% were not. For solar cycle 23, about 78% of storms were geoeffective, while for solar cycle 24, about 56% were geoeffective. For the statistical study based on speed, 85 halo CMEs associated with X-class flares were selected because the CME of 6 December 2006 has no recorded speed value. For both solar cycles, 75.29% of the halo CMEs associated with X-class flares have a speed greater than 1000 km/s. The study showed that 42.18% of halo (X) CMEs with speeds above 1000 km/s could cause intense geomagnetic disturbances. These results show the contribution (in terms of speed) of each class of halo (X) CMEs to the perturbation of the Earth’s magnetic field. Coronal mass ejections then become one of the key indicators of solar activity, especially as they affect the Earth.

火炬管网设计及校核

本文对某LNG接收站火炬处理能力进行计算,确定最大火炬泄放量及对应工况。针对不同工况,利用Aspen Flare System Analyzer软件,根据实际火炬管线配管,建立模型,对火炬管网进行核算。最终确定此LNG接收站需新增一座处理能力为80 t/h的地面火炬,可以满足工艺设计要求。另外本文可为其他火炬管网的设计提供一定参考。

油田火炬管网系统设计及优化研究

油田联合站火炬管网系统承担着将正常生产和紧急安全泄放的伴生气输送至火炬进行放空燃烧的任务。在满足泄放要求的前提下,应尽量优化工艺设计,降低火炬管网的投资。通过对泄放源压力的分析,将火炬管网划分为高压、低压管网,再用其分别泄放并筛选出最大负荷工况,优化火炬系统管网。根据API STD 521—2020《减压和泄压系统》标准并采用Aspen Flare System Analyzer软件,对火炬泄放管网系统进行工艺设计和模拟,确认各火炬系统管线的泄放介质最大马赫数以及各泄放源最大背压均满足安全泄放要求。

Prediction of Short Stellar Activity Cycles using Derived and Established Empirical Relations between Activity and Rotation Periods

In our previous work,we investigated the occurrence rate of super-flares on various types of stars and their statistical properties,with a particular focus on G-type dwarfs,using entire Kepler data.The said study also considered how the statistics change with stellar rotation period,which in turn,had to be determined.Using such new data,as a by-product,we found 138 Kepler IDs of F-and G-type main sequence stars with rotation periods less than a day(P_(rot)<1 day).On one hand,previous studies have revealed short activity cycles in F-type and G-type stars and the question investigated was whether or not short-term activity cycles are a common phenomenon in these stars.On the other hand,extensive studies exist which establish an empirical connection between a star's activity cycle and rotation periods.In this study,we compile all available Kepler data with P_(rot)<1 day,and rely on an established empirical relation between P_(cyc)and P_(rot)with the aim to provide predictions for very short 5.09≤P_(cyc)≤38.46 day cases in a tabular form.We propose an observation to measure P_(cyc)using a monitoring program of stellar activity(e.g.,activity-related chromospheric emission S-index)or a similar means for the Kepler IDs found in this study in order put the derived empirical relations between P_(cyc)and P_(rot)derived here to the test.We also propose an alternative method for measuring very short P_(cyc),using flare-detection algorithms applied to future space mission data.

New Cases of Superflares on Slowly Rotating Solar-type Stars and Large Amplitude Superflares in G-and M-type Main Sequence Stars

In our previous work,we searched for superflares on different types of stars while focusing on G-type dwarfs using entire Kepler data to study statistical properties of the occurrence rate of superflares.Using these new data,as a byproduct,we found 14 cases of superflare detection on 13 slowly rotating Sun-like stars with rotation periods of24.5–44 days.This result supports the earlier conclusion by others that the Sun may possibly undergo a surprise superflare.Moreover,we found 12 and seven new cases of detection of exceptionally large amplitude superflares on six and four main sequence stars of G-and M-type,respectively.No large-amplitude flares were detected in A,F or K main sequence stars.Here we present preliminary analysis of these cases.The superflare detection,i.e.,an estimation of flare energy,is based on a more accurate method compared to previous studies.We fit an exponential decay function to flare light curves and study the relation between e-folding decay time,τ,versus flare amplitude and flare energy.We find that for slowly rotating Sun-like stars,large values ofτcorrespond to small flare energies and small values ofτcorrespond to high flare energies considered.Similarly,τis large for small flare amplitudes andτis small for large amplitudes considered.However,there is no clear relation between these parameters for large amplitude superflares in the main sequence G-and M-type stars,as we could not establish clear functional dependence between the parameters via standard fitting algorithms.

Attention-Based Deep Learning Model for Image Desaturation of SDO/AIA

The Atmospheric Imaging Assembly(AIA)onboard the Solar Dynamics Observatory(SDO)captures full-disk solar images in seven extreme ultraviolet wave bands.As a violent solar flare occurs,incoming photoflux may exceed the threshold of an optical imaging system,resulting in regional saturation/overexposure of images.Fortunately,the lost signal can be partially retrieved from non-local unsaturated regions of an image according to scattering and diffraction principle,which is well consistent with the attention mechanism in deep learning.Thus,an attention augmented convolutional neural network(AANet)is proposed to perform image desaturation of SDO/AIA in this paper.It is built on a U-Net backbone network with partial convolution and adversarial learning.In addition,a lightweight attention model,namely criss-cross attention,is embedded between each two convolution layers to enhance the backbone network.Experimental results validate the superiority of the proposed AANet beyond state-of-the-arts from both quantitative and qualitative comparisons.

LyαEmission Enhancement Associated with Soft X-Ray Microflares

Lyα(Lyα,1216 A)is the strongest emission line in the solar ultraviolet spectrum.In the present work,we obtained a Lyαenhancement catalog covering flares larger than B1 class from the GOES/EUVS data during 2010-2016.We focused on the 242 B-class events which are less investigated,however,show non-negligible Lyαemission enhancement.We found that on average the Lyαpeak of B-class flares is 0.85%stronger than the background.For the flare energetics,it is found that the weaker the soft X-ray(SXR)flare,the larger the ratio of the radiated energy in Lyαto SXR.Using the RHESSI data and multi-wavelength observations taken by SDO-AIA,we diagnose the thermal and non-thermal properties of several flares.Three case studies show that the coincidence of the Lyαpeak with the SXR time-derivative peak is not a sufficient condition of the nonthermal property of a Lyαmicroflare.The Lyαenhancement in the microflares may be caused by the nonthermal electron beams or/and thermal conduction.However for typeⅢevents,we found that the delay of the Lyαpeak with respect to the SXR peak can be attributed to either the Lyαemission from a filament erupted or the cooling of the thermal plasma in flare loops.Furthermore,interestingly the Lyαemission from filaments can not only occur in the decay phase of the flare,but also in the preflare phase.In this case,the Lyαemission was originated from an erupted filament which probably initiated the flare.