GEOTHERMICS GEOLOGY

20162564 Li Dewei(School of Earth Sciences,China University of Geosciences,Wuhan430074,China);Wang Yanxin Major Issues of Research and Development of Hot Dry Rock Geothermal Energy(Earth Science,ISSN1000-2383,CN42-1233/P,40(11),2015,p.1858-1869,2illus.,42refs.)Key words:hot dry rocks In this paper,the authors discuss the defi-

GEOTHERMICS GEOLOGY

20161855Chen Zihui(School of Earth Sciences and Resources,China University of Geosciences(Beijing),Beijing 100083,China);Zheng Keyan Discussion on the Development Strategy of Hot Dry Rock in China(Hydrogeology and Engineering Geology,ISSN1000-3665,CN11-2202/P,42(3),2015,p.161-166,1illus.,2tables,16refs.)Key words:hot dry rocks。

GEOTHERMICS GEOLOGY

Shallow geothermal energy has been greatly developed and publicized as an affordable mineral resource that is worthy to research under today ' s economic environment and technological conditions. The application of ground source heat pump system using buried pipelines is advancing especially rapidly. However, the underground water — source based heat pump system has attracted much less research and attention.

Conventional Geothermal Systems and Unconventional Geothermal Developments: An Overview

This paper provides an overview of conventional geothermal systems and unconventional geothermal developments as a common reference is needed for discussions between energy professionals. Conventional geothermal systems have the heat, permeability and fluid, requiring only drilling down to °C, normal heat flow or decaying radiogenic granite as heat sources, and used in district heating. Medium-temperature (MT) 100°C - 190°C, and high-temperature (HT) 190°C - 374°C resources are mostly at plate boundaries, with volcanic intrusive heat source, used mostly for electricity generation. Single well capacities are °C - 500°C) and a range of depths (1 m to 20 Km), but lack permeability or fluid, thus requiring stimulations for heat extraction by conduction. HVAC is 1 - 2 m deep and shallow geothermal down to 500 m in wells, both capturing °C, with °C are either advanced by geothermal developers at <7 Km depth (Enhanced Geothermal Systems (EGS), drilling below brittle-ductile transition zones and under geothermal fields), or by the Oil & Gas industry (Advanced Geothermal Systems, heat recovery from hydrocarbon wells or reservoirs, Superhot Rock Geothermal, and millimeter-wave drilling down to 20 Km). Their primary aim is electricity generation, relying on closed-loops, but EGS uses fractures for heat exchange with earthquake risks during fracking. Unconventional approaches could be everywhere, with shallow geothermal already functional. The deeper and hotter unconventional alternatives are still experimental, overcoming costs and technological challenges to become fully commercial. Meanwhile, the conventional geothermal resources remain the most proven opportunities for investments and development.

Current status and construction scheme of smart geothermal field technology

To address the key problems in the application of intelligent technology in geothermal development,smart application scenarios for geothermal development are constructed.The research status and existing challenges of intelligent technology in each scenario are analyzed,and the construction scheme of smart geothermal field system is proposed.The smart geothermal field is an organic integration of geothermal development engineering and advanced technologies such as the artificial intelligence.At present,the technology of smart geothermal field is still in the exploratory stage.It has been tested for application in scenarios such as intelligent characterization of geothermal reservoirs,dynamic intelligent simulation of geothermal reservoirs,intelligent optimization of development schemes and smart management of geothermal development.However,it still faces many problems,including the high computational cost,difficult real-time response,multiple solutions and strong model dependence,difficult real-time optimization of dynamic multi-constraints,and deep integration of multi-source data.The construction scheme of smart geothermal field system is proposed,which consists of modules including the full database,intelligent characterization,intelligent simulation and intelligent optimization control.The connection between modules is established through the data transmission and the model interaction.In the next stage,it is necessary to focus on the basic theories and key technologies in each module of the smart geothermal field system,to accelerate the lifecycle intelligent transformation of the geothermal development and utilization,and to promote the intelligent,stable,long-term,optimal and safe production of geothermal resources.

Geochemical and Isotopic Techniques Constraints on the Origin,Evolution,and Residence Time of Low-enthalpy Geothermal Water in Western Wugongshan,SE China

Geothermal resources are increasingly gaining attention as a competitive,clean energy source to address the energy crisis and mitigate climate change.The Wugongshan area,situated in the southeast coast geothermal belt of China,is a typical geothermal anomaly and contains abundant medium-and low-temperature geothermal resources.This study employed hydrogeochemical and isotopic techniques to explore the cyclic evolution of geothermal water in the western Wugongshan region,encompassing the recharge origin,water-rock interaction mechanisms,and residence time.The results show that the geothermal water in the western region of Wugongshan is weakly alkaline,with low enthalpy and mineralization levels.The hydrochemistry of geothermal waters is dominated by Na-HCO_(3)and Na-SO_(4),while the hydrochemistry types of cold springs are all Na-HCO_(3).The hydrochemistry types of surface waters and rain waters are NaHCO_(3)or Ca-HCO_(3).The δD and δ^(18)O values reveal that the geothermal waters are recharged by atmospheric precipitation at an altitude between 550.0 and 1218.6 m.Molar ratios of maj or solutes and isotopic compositions of^(87)Sr/^(86)Sr underscore the significant role of silicate weathering,dissolution,and cation exchange in controlling geothermal water chemistry.Additionally,geothermal waters experienced varying degrees of mixing with cold water during their ascent.Theδ^(13)C values suggest that the primary sources of carbon in the geothermal waters were biogenic and organic.Theδ^(34)S value suggests that the sulfates in geothermal water originate from sulfide minerals in the surrounding rock.Age dating using 3H and^(14)C isotopes suggests that geothermal waters have a residence time exceeding 1 kaBP and undergo a long-distance cycling process.

A tectono-thermal perspective on the petroleum generation,accumulation and preservation in the southern Ordos Basin, North China

The southern Ordos Basin has excellent petroleum exploration prospects.However,the tectono-thermal history and the controls on petroleum generation,accumulation and preservation conditions in southern basin are unclear.In this study,we analyzed the present geothermal field,paleo-geothermal gradient,maturity of the hydrocarbon source rocks,uplift and cooling process and tectono-thermal evolution history.In the study area,for the Ordovician,Permain and the Triassic strata,the present temperature is low(3070℃)in the southeastern area but high(80140℃)in the northwestern area.The paleogeothermal gradient varied from 24℃/km to 30℃/km with a heat flow of 58—69 m W/m^(2)(i.e.,a medium-temperature basin).The paleo-temperatures are higher than the present temperatures and the maximum paleo-temperatures controlled the thermal maturity of the source rocks.The vitrinite reflectance(Ro)values of the Triassic strata are>0.7%and the thermal maturity reached the middlemature oil generation stage.The Rovalues of the Permian-Ordovician strata are>1.8%and the thermal maturity reached the over-mature gas generation stage.The southern Ordos Basin has experienced the multiple tectonic events at the Late Ordovician Caledonian(452 Ma),Late Triassic(215 Ma),Late Jurassic(165160 Ma),End-Early Cretaceous(110100 Ma)and Cenozoic(since 40 Ma).A large-scale tectonothermal event occurred at the End-Early Cretaceous(110100 Ma),which was controlled by lithospheric extension,destruction and thinning.This event led to the highest paleo-temperatures and thermal maturities and coeval with the peak period of petroleum generation and accumulation.The southern Ordos Basin has undergone rapid and large-scale uplift since the Late Cretaceous due to expansion of the northeastern margin of the Tibetan Plateau,uplift of the Qinling orogenic belt and thrust faulting in the Liupanshan tectonic belt.The southern Ordos Basin experienced tectonic overprinting that was strong in the south and weak in the north.The strongest overprinting occurred in the southwestern part of the basin.The large-scale uplift,denudation and faulting led to oil and gas loss from reservoirs.The petroleum generation,accumulation and preservation in the southern Ordos Basin were affected by deep lithospheric structures and the tectono-thermal evolution.This work provides a novel tectono-thermal perspective on the petroleum generation,accumulation and preservation condition of the southern Ordos Basin.

Long-term hydrochemical monitoring and geothermometry:understanding groundwater salinization and thermal fluid contamination in Mila’s basin,Northeastern Algeria

The regular hydrochemical monitoring of groundwater in the Mila basin over an extended period has provided valuable insights into the origin of dissolved salts and the hydrogeochemical processes controlling water salinization.The data reveals that the shallow Karst aquifer shows an increase in TDS of 162 mg L^(-1) while the ther-mal carbonate aquifer that is also used for drinking water supply exhibits an increase of 178 mg L^(-1).Additionally,significant temperature variations are recorded at the sur-face in the shallow aquifers and the waters are carbo-gaseous.Analysis of dissolved major and minor elements has identified several processes influencing the chemical composition namely:dissolution of evaporitic minerals,reduction of sulphates,congruent and incongruent car-bonates’dissolution,dedolomitization and silicates’weathering.The hydrogeochemical and geothermometric results show a mixing of saline thermal water with recharge water of meteoric origin.Two main geothermalfields have been identified,a partially evolved water reservoir and a water reservoir whosefluid interacts with sulphuric acid(H_(2)S)of magmatic origin.These hot waters that are char-acterized by a strong hydrothermal alteration do ascend through faults and fractures and contribute to the contamination of shallower aquifers.Understanding the geothermometry and the hydrogeochemistry of waters is crucial for managing and protecting the quality of groundwater resources in the Mila basin,in order to ensure sustainable water supply for the region.A conceptual model for groundwater circulation and mineralization acquisition has been established to further enhance under-standing in this regard.

Evaluation of development potential of pumped hydroelectric storage and geothermal utilization system in abandoned coal mine

Every year in China,a significant number of mines are closed or abandoned.The pumped hydroelectric storage(PHS)and geothermal utilization are vital means to efficiently repurpose resources in abandoned mine.In this work,the development potentials of the PHS and geothermal utilization systems were evaluated.Considering the geological conditions and meteorological data available of Jiahe abandoned mine,a simple evaluation model for PHS and geothermal utilization was established.The average efficiency of the PHS system exceeds 70%and the regulatable energy of a unit volume is over 1.53 kW·h/m^(3).The PHS system achieves optimal performance when the wind/solar power ratio reaches 0.6 and 0.3 in daily and year scale,respectively.In the geothermal utilization system,the outlet temperature and heat production are significantly affected by the injection flow rate.The heat production performance is more stable at lower rate flow,and the proportion of heat production is higher in the initial stage at greater flow rate.As the operating time increases,the proportion of heat production gradually decreases.The cyclic heat storage status has obvious advantages in heat generation and cooling.Furthermore,the energy-saving and emission reduction benefits of PHS and geothermal utilization systems were calculated.

Hydro-mechanical-electrical simulations of synthetic faults in two orthogonal directions with shear-induced anisotropy

Fluid flow in fractures controls subsurface heat and mass transport,which is essential for developing enhanced geothermal systems and radioactive waste disposal.Fracture permeability is controlled by fracture microstructure(e.g.aperture,roughness,and tortuosity),but in situ values and their anisotropy have not yet been estimated.Recent advances in geophysical techniques allow the detection of changes in electrical conductivity due to changes in crustal stress and these techniques can be used to predict subsurface fluid flow.However,the paucity of data on fractured rocks hinders the quantitative interpretation of geophysical monitoring data in the field.Therefore,considering different shear displacements and chemical erosions,an investigation was conducted into the hydraulic-electric relationship as an elevated stress change in fractures.The simulation of fracture flows was achieved using the lattice Boltzmann method,while the electrical properties were calculated through the finite element method,based on synthetic faults incorporating elastic-plastic deformation.Numerical results show that the hydraulic and electrical properties depend on the rock's geometric properties(i.e.fracture length,roughness,and shear displacement).The permeability anisotropy in the direction parallel or perpendicular to the shear displacement is also notable in high stress conditions.Conversely,the permeability econductivity(i.e.,formation factor)relationship is unique under all conditions and follows a linear trend in logarithmic coordinates.However,both matrix porosity and fracture spacing alter this relationship.Both increase the slope of the linear trend,thereby changing the sensitivity of electrical observations to permeability changes.

Effects of fracture evolution and non-Darcy flow on the thermal performance of enhanced geothermal system in 3D complex fractured rock

In fractured geothermal reservoirs,the fracture networks and internal fluid flow behaviors can significantly impact the thermal performance.In this study,we proposed a non-Darcy rough discrete fracture network(NR-DFN)model that can simultaneously consider the fracture evolution and non-Darcy flow dynamics in studying the thermo-hydro-mechanical(THM)coupling processes for heat extraction in geothermal reservoir.We further employed the model on the Habanero enhanced geothermal systems(EGS)project located in Australia.First,our findings illustrate a clear spatial-temporal variation in the thermal stress and pressure perturbations,as well as uneven spatial distribution of shear failure in 3D fracture networks.Activated shear failure is mainly concentrated in the first fracture cluster.Secondly,channeling flow have also been observed in DFNs during heat extraction and are further intensified by the expansion of fractures driven by thermal stresses.Moreover,the combined effect of non-Darcy flow and fracture evolution triggers a rapid decline in the resulting heat rate and temperature.The NR-DFN model framework and the Habanero EGS's results illustrate the importance of both fracture evolution and non-Darcy flow on the efficiency of EGS production and have the potential to promote the development of more sustainable and efficient EGS operations for stakeholders.

Hydrothermal alteration of the surface volcanic rocks at the Acoculco geothermal field,Mexico:a multi-parametric approach

The studies on hydrothermal alteration-induced eff ects in surface and subsurface rocks provide useful information in the characterization and exploitation of a geothermal reservoir.Generally,these studies are based on traditional,and reliable methods like petrography(primary and secondary minerals,and grade of alteration),and geochemistry(mobility of elements,changes in mass and concentration of elements,and fluid inclusions).Recently,apart from these established methods,some methods based on the geochemical(Chemical Index of Alteration,CIA;Weathering Index of Parkar,WIP;Loss on Ignition,LOI;and Sulfur,S)and rock magnetic properties(magnetic susceptibility,χlf;and percentage frequency-dependent susceptibility,χfd%)are also being applied in the identification of whether a rock is an altered or a fresh one.The Acoculco Geothermal Field(AGF),Mexico,is characterized by high temperature and very low permeability,and it is considered a promissory Enhanced Geothermal System.The following changes are observed in the rocks as a result of an increase in hydrothermal alteration:(1)an increase in CIA,LOI,and S values,and a decrease in WIP;(2)an increase in quartz and quartz polymorph minerals(silicification),and clay minerals(argillization);and(3)decrease inχlf values.At AGF,the most altered surface acid rocks are characterized by entirely quartz and its polymorphs,and clay minerals.The present study also indicates the applicability of the binary plots of major elements(felsic vs mafic component)and rock magnetic parameters(χlf vs.χfd%).The rock withχfd%value of 2-10 andχlf value<0.5×10^(-6)m^(3) kg^(-1)indicate the presence of single domain and stable single domain grains,which in turn suggests that it is an altered rock.These methods are simple to apply,rapid,reliable,and have the potential to become eff ective tools for the identifi cation of hydrothermally altered rocks during the initial stage of geothermal exploration.