英语短语动词的三要素——以away组成的含gradually之义的短语动词为例

从语义的角度来对短语动词进行系统地认知是一种科学的新理念、新方法。以短语动词中的副词或介词为主线来进行纵向的组群亦是切实可行的一种好方法。然后在横向上辨析相关的同义的短语。以三者的有机结合所形成的复合思维来加以认知则更具特色。由away组成的短语动词可表数个意义。含“gradually”之义时,所表意义为动状关系。

A gradually descent method for discrete global optimization

In this paper, a new method named as the gradually descent method was proposed to solve the discrete global optimization problem. With the aid of an auxiliary function, this method enables to convert the problem of finding one discrete minimizer of the objective function f to that of finding another at each cycle. The auxiliary function can ensure that a point, except a prescribed point, is not its integer stationary point if the value of objective function at the point is greater than the scalar which is chosen properly. This property leads to a better minimizer of f found more easily by some classical local search methods. The computational results show that this algorithm is quite efficient and reliable for solving nonlinear integer programming problems.

China's Science Gradually Strengthened

In order to ensure the steady development of our science, the Chinese government has continuously increased input in the last ten years. Information from the State Statistics Bureau shows that by the end of 1994, the national institutions and enterprises boasted 18.659 million technical experts, 4.3 times the number in 1978, or 1258 technical experts every ten thousand people, redoubling that of 1978. The whole country has 5860 independent scientific research and development (R & D) institutions,

Material Removal Mechanism and Force Modeling in Ultrasonic Vibration-Assisted Micro-Grinding Biological Bone

Micro-grinding with a spherical grinding head has been deemed an indispensable method in high-risk surgeries, such as neurosurgery and spine surgery, where bone grinding has long been plagued by the technical bottleneck of mechanical stress-induced crack damage. In response to this challenge, the ultrasound-assisted biological bone micro-grinding novel process with a spherical grinding head has been proposed by researchers. Force modeling is a prerequisite for process parameter determination in orthopedic surgery, and the difculty in establishing and accurately predicting bone micro-grinding force prediction models is due to the geometric distribution of abrasive grains and the dynamic changes in geometry and kinematics during the cutting process. In addressing these critical needs and technical problems, the shape and protrusion heights of the wear particle of the spherical grinding head were frst studied, and the gradual rule of the contact arc length under the action of high-speed rotating ultrasonic vibration was proposed. Second, the mathematical model of the maximum thickness of undeformed chips under ultrasonic vibration of the spherical grinding head was established. Results showed that ultrasonic vibration can reduce the maximum thickness of undeformed chips and increase the range of ductile and bone meal removals, revealing the mechanism of reducing grinding force. Further, the dynamic grinding behavior of diferent layers of abrasive particles under diferent instantaneous interaction states was studied. Finally, a prediction model of micro-grinding force was established in accordance with the relationship between grinding force and cutting depth, revealing the mechanism of micro-grinding force transfer under ultrasonic vibration. The theoretical model’s average deviations are 10.37% in x-axis direction, 6.85% in y-axis direction, and 7.81% in z-axis direction compared with the experimental results. This study provides theoretical guidance and technical support for clinical bone micro-grinding.

The gradual subduction-collision evolution model of Proto-South China Sea and its control on oil and gas

This study involved outcrop,drilling,seismic,gravity,and magnetic data to systematically document the geological records of the subduction process of Proto-South China Sea(PSCS)and establish its evolution model.The results indicate that a series of arc-shaped ophiolite belts and calcalkaline magmatic rocks are developed in northern Borneo,both of which have the characteristics of gradually changing younger from west to east,and are direct signs of subduction and collision of PSCS.At the same time,the subduction of PSCS led to the formation of three accretion zones from the south to the north in Borneo,the Kuching belt,Sibu belt,and Miri belt.The sedimentary formation of northern Borneo is characterized by a three-layer structure,with the oceanic basement at the bottom,overlying the deep-sea flysch deposits of the Rajang–Crocker group,and the molasse sedimentary sequence that is dominated by river-delta and shallow marine facies at the top,recording the whole subduction–collision–orogeny process of PSCS.Further,seismic reflection and tomography also confirmed the subduction and collision of PSCS.Based on the geological records of the subduction and collision of PSCS,combined with the comprehensive analysis of segmented expansion and key tectonic events in the South China Sea,we establish the“gradual”subduction-collision evolution model of PSCS.During the late Eocene to middle Miocene,the Zengmu,Nansha,and Liyue–Palawan blocks were separated by West Baram Line and Balabac Fault,which collided with the Borneo block and Kagayan Ridge successively from the west to the east,forming several foreland basin systems,and PSCS subducted and closed from the west to the east.The subduction and extinction of PSCS controlled the oil and gas distribution pattern of southern South China Sea(SSCS)mainly in three aspects.First,the“gradual”closure process of PSCS led to the continuous development of many large deltas in SSCS.Second,the deltas formed during the subduction–collision of PSCS controlled the development of source rocks in the basins of SSCS.Macroscopically,the distribution and scale of deltas controlled the distribution and scale of source rocks,forming two types of source rocks,namely,coal measures and terrestrial marine facies.Microscopically,the difference of terrestrial higher plants carried by the delta controlled the proportion of macerals of source rocks.Third,the difference of source rocks mainly controlled the distribution pattern of oil and gas in SSCS.Meanwhile,the difference in the scale of source rocks mainly controlled the difference in the amount of oil and gas discoveries,resulting in a huge amount of oil and gas discoveries in the basin of SSCS.Meanwhile,the difference of macerals of source rocks mainly controlled the difference of oil and gas generation,forming the oil and gas distribution pattern of“nearshore oil and far-shore gas”.

Analysis of Key Physiological Characteristics of Portunus trituberculatus in Response to Short-Term Low Salinity Stress

Salinity is a significant environmental factor that can affect the survival,metamorphosis,growth and feeding of Portunus trituberculatus.In order to analyze the key physiological characteristics of P.trituberculatus in response to short-term low salinity stress,the experiments of gradually decline and recovery as well as abrupt decline in salinity were carried out.The results showed that P.trituberculatus could survive in a certain low salinity range in the short term,and salinity 12 was the lowest tolerable salinity under the present experimental conditions.The change of the hemolymph osmotic pressure displayed significant positive correlations with water salinity,and the pressure was always higher than seawater osmotic pressure.Short-term low salinity stress changed the structure and morphology of gill tissue.The expansion of gill filament ends and epithelial cell shedding were conducive to osmotic adjustment.The activities of key ion transport enzymes such as Na^(+)-K^(+)-ATPase,carbonic anhydrase and V-ATPase also changed with the osmotic regulation,while Na^(+)-K^(+)-ATPase played a dominant role.In summary,as an osmotic adjustment species,P.trituberculatus rapidly adapt to the short-term low-salinity environment by osmotic adjustment in vivo,but salinity below salinity 12 is not conducive to its survival.Our result enriched the theoretical mechanism of osmotic regulation of P.trituberculatus,providing reference for the development of aquaculture technology of P.trituberculatus.

Gradual Bedside Reduction of Gastroschisis in a Resource Constrained Setting: Preliminary Results from 32 Cases

Introduction: Gastroschisis is one of the neonatal pathologies with bad prognosis in developing countries due to a lack of equipment. We aim to report one way of managing this malformation that could be practised everywhere, constituting an alternative approach to surgery in poor areas. Patients and Methods: This observational and descriptive study included newborn babies with gastroschisis who underwent gradual bedside reduction at the Paediatric Surgery Department of the Yaounde Central Hospital. Results: Our cohort was constituted by 32 newborn babies with a mean age of 18.12 hours on admission. The Lefort type 2 was the most frequent in 81.25% of cases. The mean time for oral feeding after complete reduction was 17.4 days and the duration of hospital stay was 24.91 days. Survival rates were at 40.63%, with a residual hernia after healing in 38.46% of cases. Conclusion: Despite the high rate of mortality, gradual reduction of gastroschisis at the bedside seems to be an opportunity for resource constrained areas and can be an alternative solution to surgery.

Barrier Structure Design for Fattening Pigs in Large-scale Pig House with Fermentation Bed

[Objective] The large-scale single-column fattening pig house with fermen- tation bed could hold 1 500 heads of fattening pigs. Since the number of pigs in piggery is too large, the management is difficult. The behavior of feeding, drinking, movement, sleeping, fighting of pigs is difficult to handle. The pigs cannot be man- aged well, resulting in the enhanced weakness of piglets, enhanced illness of weak pigs and missing treatment of ill pigs. The management for the pig populations is not satisfactory, and thus, it is needed to improve timely. [Method] The barriers for the fattening pigs in the large-scale pig house with fermentation bed were designed. The single management for single fattening pig was proposed. The large-scale fat- tening pig house was divided into 8 regions. Among them, 4 regions were located in both sides of the fermentation bed. Their main function was to separate ill, weak, small and bad pigs. In addition, the main column was divided into 4 gradual barri- ers. They were used to separate different-size fattening pigs. In view of manage- ment, the different-type pigs were managed dividedly with the gradual barriers. The equally-sized pigs were concentrated into one column. The ill, weak, small and bad pigs were isolated into barriers. Thus, the dynamic management was adopted. Until the fattening pigs grew up to 75 kg and their health was stable, the barriers among the columns were canceled to mix the pigs again and guarantee the pigs more gymnastic space. [Result] This design would improve the disease resistance of ill pigs, health status of weak pigs and management level of pig populations. This study would also provide a basis for the healthy running of large-scale fattening pig house with fermentation bed. [Conclusion] The pig-raising model with fermentation bed would improve the environment of pig house and the welfare of pigs. In addi- tion, the performance of pigs and quality of pork were also improved. The fermen- tation bed had an obvious advantage in safety and economics, and it had a broad application prospect.

Spatial-temporal Evolution and Driving Force of Cultivated Land Quality in Henan Province

The purpose of this study was to find out the spatial-temporal rules and driving force of cultivated land quality in Henan Province in the last ten years. Agricultural land grading factor evaluation was used to evaluate the cultivated land quality of 2002 and 2012 in Henan Province, and to research the change laws. Method of correlation coefficient was employed to select the driving forces affecting cultivated land quality evolution. The results indicated that the cultivated land quality in Henan Province increased slightly in the last ten years in general, and in spatial there were unchanged regions, increased regions and decreased regions. The cultivated land quality in spatial presented the trend of good becoming better, bad becoming worse, which should be highly valued in cultivated land quality protection and management. Land development and consolidation projects had significant contributions to increasing the cultivated land quality. Driving forces between the sudden change regions and gradual change regions were significantly different. The paper concluded that the research on the spatial-temporal evolution and driving force of cultivated land quality based on cultivated land quality evolution had important academic significance and practical value.

Gradual solution heat treatment of AlSiCuMg cast alloys

The microstructure characteristics of AlSiCuMg cast alloys were studied withdifferent Cu content and the gradual solution treatment by DSC, SEM, TEM and mechanical method. Themelting point of alpha (Al) + Si decreases and polynary eutectic phases with low melting point formwith increase of Cu content. Gradual solution treatment includes two steps: solution treating nearthe melting point of polynary eutectic phase to take it dissolve first, and then increasing solutiontemperature to take the remainder copper intermetallics dissolved into alpha (Al). Grain boundariesmelting can be avoided by gradual solution treatment, even the maximum solution temperature isabove final solidification point, and the age hardening response increases correspondingly

Transition from Metastablity to Instability in Dynamics for the Precipitation of δ'(Al_3Li)

A computer simulation study on dynamics for the precipitation of δ'(Al_3Li) ordered particles from a disor- dered matrix (α) in binary Al-Li alloys is performed using the microscopic Langevin equation. A unique precipitation mechanism is found near the ordering spinodal line. Different from the classical nucleation mechanism in the me- tastable region and the congruent ordering followed by spinodal decomposition in the instable region, a nonstoichi- ometric single ordered phase with composition fluctuations is formed by non-classical nucleation, and this ordered phase decomposes spinodally. It can be concluded that the precipitation dynamics of δ' phase from metastability to instability is gradual, and no sharp transition occurs near the mean-field spinodal line as the mean-field theory pre- dicts.

A SIMPLE CONSTITUTIVE MODEL FOR FERROELECTRIC CERAMICS UNDER ELECTRICAL/MECHANICAL LOADING

A simple phenomenological model is developed for describing the macroscopic constitutive response of ferroelectric materials based on consideration of the fact that domain switching is a progressive evolution process with loading. The volume fraction of domain switching is taken as an internal variable, which is derived from the domain nucleation theory. The proposed theory can simulate the dielectric hysteresis, reversed butterfly hysteresis, nonlinear strain-stress hysteresis, as well as electric displacement-stress relation of ferroelectric materials. Its compaxison with experimental results and two other theoretical models reveals that the model presented can well predict the nonlinear hysteresis of ferroelectrics under electrical or mechanical loading.

Topology Optimization of Self-Supporting Structures for Additive Manufacturing with Adaptive Explicit Continuous Constraint

The integration of topology optimization(TO)and additive manufacturing(AM)technologies can create significant synergy benefits,while the lack of AM-friendly TO algorithms is a serious bottleneck for the application of TO in AM.In this paper,a TO method is proposed to design self-supporting structures with an explicit continuous self-supporting constraint,which can be adaptively activated and tightened during the optimization procedure.The TO procedure is suitable for various critical overhang angles(COA),which is integrated with build direction assignment to reduce performance loss.Besides,a triangular directional self-supporting constraint sensitivity filter is devised to promote the downward evolution of structures and maintain stability.Two numerical examples are presented;all the test cases have successfully converged and the optimized solutions demonstrate good manufacturability.In the meanwhile,a fully self-supporting design can be obtained with a slight cost in performance through combination with build direction assignment.

ANALYSIS MODEL ON GRADUAL CHANGE PRINCIPLE OF EFFECT ZONES OF LAYER FACE FOR ROLLED CONTROL CONCRETE DAM

The effect zones of layer face for RCC （rolled control concrete） dam have gradual change characteristics. Based on the analysis thought of complex material, a model was built to analyze above principle of RCC dam by use of series-wound and shunt-wound connection. Some methods were proposed to determine the instantaneous Young＇s modulus, delayed Young＇s modulus and viscosity coefficient of effect zones of layer face. Above models and methods were used to mine the principle of gradual change of key calculation parameters which can response the characteristics of effect zones. The principle of gradual change was described. A model was established to analyze the threedimensional viscoelastic problem of RCC dam. Above programs were developed. The examples show that the proposed models and methods to determine the key calculation parameters of effect zones can reflect the status of RCC dam accurately.

Enabling in the Production-Oriented Approach:Theoretical Principles and Classroom Implementation

Enabling as the second phase of the Production-Oriented Approach(POA)instruction(Wen,2015),plays a vital role in determining the quality of productive performance of English language learners.To explore how to apply theoretical principles of enabling to practice,this paper interprets theoretical principles and reports the practice of the classroom implementation of enabling.The paper proposes a definition for enabling,clarifies the confusion between enabling and scaffolding,and clears up some misunderstandings about enabling.It explains three criteria for effective enabling,namely,alignment,gradualness,and variety,and elaborates on the relations among them.Based on the teaching material of Unit 7 of iEnglish,the paper demonstrates how to design and implement enabling activities under the guidance of these three criteria and evaluates the actual effectiveness of the enabling implemented in the classroom.

Proximal tibial osteotomy for genu varum:Radiological evaluation of deformity correction with a plate vs external fixator

BACKGROUND High tibial osteotomy(HTO)is a well-known procedure for the correction of knee varus.The purpose of this study was to compare the radiological results and accuracy of deformity correction performed using two different techniques:acute opening wedge correction using a plate and gradual correction with a monolateral external fixator.AIM To compare of the radiological results of two different techniques:acute opening wedge correction(a plate and screw)and gradual correction(external fixator).METHODS A total of 43 patients with plates and 36 patients with external fixators were included.All patients had moderate uniplanar varus deformities.We measured radiographic parameters,including the mechanical axis deviation(MAD),medial proximal tibial angle(MPTA),Caton-Deschamps Index(CDI),posterior proximal tibial angle,and joint line obliquity angle(JLOA).The accuracy of MAD correction was calculated based on a correction goal of neutral or overcorrection for medial compartment arthritis.RESULTS Demographics including age,body mass index,sex,and preoperative deformities were similar between the groups.The MAD significantly improved from 23.6 mm medial to the midline(SD=8.2 mm)to 6.9 mm lateral to the midline(SD=5.4 mm)(P<0.001).The accuracy of MAD correction did not differ between the groups and was 96.1%(SD=8.1%)in the plate group and 98.2%(SD=5.2%)in the external fixator group(P=0.18).The MPTA significantly improved from 83.9°(SD=2.9°)to 90.9°(SD=3.3°)(P<0.001),and the change was similar between the groups.Differences were noted in patella height,with a CDI change of-19.2%(SD=13.7%)and 3.1%(SD=8.0%)for the plate and external fixator groups,respectively(P<0.001).The change in JLOA was 1.6 degrees(SD=1.1 degrees)and 0.9 degrees(SD=0.9 degrees)for the plate and external fixator groups,respectively(P=0.04).CONCLUSION Reliable correction of moderate varus alignment was achieved with both the acute opening wedge technique with a plate and the gradual monolateral external fixator technique.The patellar height decreased with the open wedge plate technique.Joint line obliquity decreased to a greater degree with the open wedge plate technique,perhaps as a result of medial collateral ligament release.The appropriate technique should be selected based on surgeon and patient preferences;however,external fixation may be a better choice when the preservation of patellar height is deemed important.

Gradual Clamping Reduced Ischemia-Reperfusion Injury in an Isolated Rat Heart Model

Objectives: We hypothesized that the organisms and their organs or tissues could adapt themselves to the gradual changes of environment for surviving or reducing damage. This study explored whether gradual clamping (GC) could reduce myocardial ischemia-reperfusion (IR) injury in rat heart. Methods: Twelve rats were randomized to IR group and GC group, then the hearts were isolated and perfused with Langendorff apparatus. Before cardioplegia, the perfusion was stopped abruptly in IR group while slowly with 5-minute in GC group. The hearts were subjected to 30-minute ischemia and 60-minute reperfusion. The left ventricular develop pressure (LVDP) and systolic pressure (LVSP), the maximal rate of the increase and decrease of left ventricular pressure (+dp/dtmax, ﹣dp/dtmax) were measured by polygraph system at different time points. The recovery of the variables was expressed as the ratio of these values at individual time point after reperfusion to the baseline respectively. Results: The recovery of LVDP after reperfusion was better than that in IR group (P = 0.034). No significant difference in the recovery of LVSP, +dp/dtmax and ﹣dp/dtmax between groups was observed. Conclusions: Gradual clamping could improve the recovery of LVDP after IR, suggesting that gradual clamping could reduce myocardial IR injury.

AN INTRODUCTION TO KEEPING-FIT MASSAGE(1)

Massage,called Anmo (pressing andrubbing) in ancient times,is a non-drugtherapy,characterized by its simplicity,con-venience,cheapness and effectiveness,whichhas been used as one of the effectivekeeping-fit measures since thausands ofyears ago.With gradual improvement of people’sliving standard,the problem of health carehas been put on the agenda,receiving a wideattention from the medical circle.SinceChina has a long history of civilization,scholars of successive ages have left to ournation ample valuable knowledge of healthcare.Among many theories I am much infavour of the keeping fit idea,the“

Efficient and reliable road modeling for digital maps based on cardinal spline

In order to realize an optimal balance between the efficiency and reliability requirements ofroad models,a road modeling method for digital maps based on cardinal spline is studied.First,the cardinal spline is chosen to establish an initial road model,which is specified by a series of control points and tension parameters.Then,in view of the initial road model,a gradual optimization algorithm,which can determine the reasonable control points and optimal tension parameters according to the degree of the change of road curvature,is proposed to determine the final road model.Finally,the proposed road modeling method is verified a d evaluated through experiments,and it is compared with the conventional method for digital maps based on the B-spline.The results show that the proposed method can resize a neaoptimal balance between the efficiency and reliability requirements.Compared with the conventional method based on the B-spline,this method occupies less data storage and achieves higher accuracy.

ART-2 neural network based on eternal term memory vector:Architecture and algorithm

Aimed at the problem that the traditional ART-2 neural network can not recognize a gradually changing course, an eternal term memory (ETM) vector is introduced into ART-2 to simulate the function of human brain, i.e. the deep remembrance for the initial impression.. The eternal term memory vector is determined only by the initial vector that establishes category neuron node and is used to keep the remembrance for this vector for ever. Two times of vigilance algorithm are put forward, and the posterior input vector must first pass the first vigilance of this eternal term memory vector, only succeeded has it the qualification to begin the second vigilance of long term memory vector. The long term memory vector can be revised only when both of the vigilances are passed. Results of recognition examples show that the improved ART-2 overcomes the defect of traditional ART-2 and can recognize a gradually changing course effectively.