A seed-directed approach to synthesizing Fe ZSM-22 zeolite without organic structure directing agent(OSDA)was developed by using Fe-rich diatomite as all aluminum and iron sources.The Fe ZSM-22zeolite with optimal cry...A seed-directed approach to synthesizing Fe ZSM-22 zeolite without organic structure directing agent(OSDA)was developed by using Fe-rich diatomite as all aluminum and iron sources.The Fe ZSM-22zeolite with optimal crystallinity and purity can be obtained by systematically adjusting feed composition and synthesis conditions.Characterizations show that Fe ZSM-22 zeolite synthesized with OSDA-free owns high crystallinity,obvious thin needle-shaped morphology and high Bronsted/Lewis acid ratio.Significantly,when used for n-octane hydroisomerization reaction,its derived catalyst exhibits the best catalytic performance reflected by the highest selectivity to C_(8)isomers compared to the two reference catalysts prepared based on a Fe-containing and a Fe-free ZSM-22 synthesized through an OSDA-directed route from natural diatomite and conventional chemicals,respectively.This work provides an alternative route to sustainably synthesizing heteroatomic zeolites with high performance.展开更多
Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of ...Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of these catalysts were characterized by X-Ray Diffraction （XRD）, N2 absorption-desorption, Pyridine-Fourier Transform Infrared （Py-FTIR）, Transmission Electron Microscopy （TEM）, X-Ray Fluorescence （XRF）, Scanning Electron Microscopy （SEM） and NH3- Temperature Programmed Desorption （NH3-TPD）, and the performance of these catalysts in n-dodecane hydroisomerization was evaluated in a continuous down-flow fixed bed with a stainless steel tubular reactor. The characterization results indicated that the intergrowth zeolite ZSM-22/ZSM-23 possessed the dual structure of ZSM-22 and ZSM-23, and the catalyst Pt/ZSM-22/ZSM-23 had similar pores and weak acidity to Pt/ZSM-22 and Pt/ZSM-23 catalysts. Moreover, Pt/ZSM-22/ZSM-23 catalyst showed a high selectivity in hydroisomerization of long chain n-alkanes to mono-branched isomers. The evaluation results for n-dodecane hydroisomerization indicated that the activity of Pt/ZSM-22/ZSM-23 was the lowest, while the hydroisomerization selectivity was the highest among the three catalysts. The maximum yield of i-dodecane product was 68.3% over Pt/ZSM-22/ZSM-23 at 320 ℃.展开更多
The reaction mechanism for alkylation of benzene with propylene over the β zeolite and the MCM-22 zeolite were investigated respectively by in-situ IR spectrometry. Three types of experiments were carried out. （1） ...The reaction mechanism for alkylation of benzene with propylene over the β zeolite and the MCM-22 zeolite were investigated respectively by in-situ IR spectrometry. Three types of experiments were carried out. （1） IR spectra of the gas-phase propylene, benzene and isopropyl benzene were recorded. （2） IR spectra of the above-mentioned substances as adsorbates that have combined with the zeolite wafer were recorded. （3） IR spectra of the reaction modes were recorded. The test results showed that the alkytation reaction over the zeolite β was ascribed to the mechanism of carbonium ions, whereas the alkylation reaction over the zeolite MCM-22 was ascribed to the synchronous reaction mechanism.展开更多
The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure o...The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure on the performance of MCM-22 zeolite for catalytic skeletal isomerization of 1-hexene was examined. The experimental results showed that at a steam treatment temperature of 500℃, a reaction temperature of 270℃, a space velocity of 1.0 h-1 and a reaction pressure of 0.2 MPa, the MCM-22 zeolite exhibited excellent performance for catalytic skeletal isomerization of 1-hexene with the i-hexene yield reaching 66.15%. Compared with other commonly used molecular sieve catalysts, the MCM-22 zeolite catalyst exhibited better catalytic performance for skeletal isomerization of 1-hexene.展开更多
ITQ-2 zeolites were prepared by sequential alkali-swelling and ultrasonic-delamination of precursor MCM-22 and characterized by X-ray powder diffraction, scanning electron microscopy, nitrogen adsorption-desorption, a...ITQ-2 zeolites were prepared by sequential alkali-swelling and ultrasonic-delamination of precursor MCM-22 and characterized by X-ray powder diffraction, scanning electron microscopy, nitrogen adsorption-desorption, ammonia temperature-programmed desorption and in-situ Fourier-transform infrared spectroscopy. The delamination induced a change in the morphology of ITQ-2 zeolites from aggregated thin platelets to scattered platelets, together with a significant increase in external specific surface area, which reached a plateau at the ultrasonic treatment time of 3 h. The catalytic cracking of n-dodecane over ITQ-2 zeolites was evaluated with ITQ-2 coated on the inside wall of a tubular reactor at 550 ℃ and 4 MPa. The sample obtained by ultrasonic treatment of 3 h （ITQ-2-3） gave the highest initial conversion of n-dodecane, whereas those of 5 h and I h gave the conversion even lower than MCM-22, which was in agreement with the trend of the ratio of strong Lewis acid to the total acid amount. Although the amount of cokes deposited on ITQ-2-3 was larger than that on MCM-22, the former deactivated slowly, suggesting that a large external specific surface area benefits the stability of zeolite coatings,展开更多
基金the financial supports from the National Natural Science Foundation of China(22322803,22178059,22208054,22221005,22072019)Key Technologies Innovation and Industrialization Projects of Fujian Province(2022G031)Qingyuan Innovation Laboratory(00121002,00523005)。
文摘A seed-directed approach to synthesizing Fe ZSM-22 zeolite without organic structure directing agent(OSDA)was developed by using Fe-rich diatomite as all aluminum and iron sources.The Fe ZSM-22zeolite with optimal crystallinity and purity can be obtained by systematically adjusting feed composition and synthesis conditions.Characterizations show that Fe ZSM-22 zeolite synthesized with OSDA-free owns high crystallinity,obvious thin needle-shaped morphology and high Bronsted/Lewis acid ratio.Significantly,when used for n-octane hydroisomerization reaction,its derived catalyst exhibits the best catalytic performance reflected by the highest selectivity to C_(8)isomers compared to the two reference catalysts prepared based on a Fe-containing and a Fe-free ZSM-22 synthesized through an OSDA-directed route from natural diatomite and conventional chemicals,respectively.This work provides an alternative route to sustainably synthesizing heteroatomic zeolites with high performance.
基金the financial supports form Petrochina(050508-04-02)the National Natural Science Foundation of China(No.21073235,and 20833011)
文摘Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of these catalysts were characterized by X-Ray Diffraction （XRD）, N2 absorption-desorption, Pyridine-Fourier Transform Infrared （Py-FTIR）, Transmission Electron Microscopy （TEM）, X-Ray Fluorescence （XRF）, Scanning Electron Microscopy （SEM） and NH3- Temperature Programmed Desorption （NH3-TPD）, and the performance of these catalysts in n-dodecane hydroisomerization was evaluated in a continuous down-flow fixed bed with a stainless steel tubular reactor. The characterization results indicated that the intergrowth zeolite ZSM-22/ZSM-23 possessed the dual structure of ZSM-22 and ZSM-23, and the catalyst Pt/ZSM-22/ZSM-23 had similar pores and weak acidity to Pt/ZSM-22 and Pt/ZSM-23 catalysts. Moreover, Pt/ZSM-22/ZSM-23 catalyst showed a high selectivity in hydroisomerization of long chain n-alkanes to mono-branched isomers. The evaluation results for n-dodecane hydroisomerization indicated that the activity of Pt/ZSM-22/ZSM-23 was the lowest, while the hydroisomerization selectivity was the highest among the three catalysts. The maximum yield of i-dodecane product was 68.3% over Pt/ZSM-22/ZSM-23 at 320 ℃.
文摘The reaction mechanism for alkylation of benzene with propylene over the β zeolite and the MCM-22 zeolite were investigated respectively by in-situ IR spectrometry. Three types of experiments were carried out. （1） IR spectra of the gas-phase propylene, benzene and isopropyl benzene were recorded. （2） IR spectra of the above-mentioned substances as adsorbates that have combined with the zeolite wafer were recorded. （3） IR spectra of the reaction modes were recorded. The test results showed that the alkytation reaction over the zeolite β was ascribed to the mechanism of carbonium ions, whereas the alkylation reaction over the zeolite MCM-22 was ascribed to the synchronous reaction mechanism.
文摘The performance of MCM-22 zeolite for catalytic isomerization of 1-hexene has been studied. At a n(H2)/n(1-hexene) ratio of 8, the influence of steam treatment temperature, reaction temperature and reaction pressure on the performance of MCM-22 zeolite for catalytic skeletal isomerization of 1-hexene was examined. The experimental results showed that at a steam treatment temperature of 500℃, a reaction temperature of 270℃, a space velocity of 1.0 h-1 and a reaction pressure of 0.2 MPa, the MCM-22 zeolite exhibited excellent performance for catalytic skeletal isomerization of 1-hexene with the i-hexene yield reaching 66.15%. Compared with other commonly used molecular sieve catalysts, the MCM-22 zeolite catalyst exhibited better catalytic performance for skeletal isomerization of 1-hexene.
文摘ITQ-2 zeolites were prepared by sequential alkali-swelling and ultrasonic-delamination of precursor MCM-22 and characterized by X-ray powder diffraction, scanning electron microscopy, nitrogen adsorption-desorption, ammonia temperature-programmed desorption and in-situ Fourier-transform infrared spectroscopy. The delamination induced a change in the morphology of ITQ-2 zeolites from aggregated thin platelets to scattered platelets, together with a significant increase in external specific surface area, which reached a plateau at the ultrasonic treatment time of 3 h. The catalytic cracking of n-dodecane over ITQ-2 zeolites was evaluated with ITQ-2 coated on the inside wall of a tubular reactor at 550 ℃ and 4 MPa. The sample obtained by ultrasonic treatment of 3 h （ITQ-2-3） gave the highest initial conversion of n-dodecane, whereas those of 5 h and I h gave the conversion even lower than MCM-22, which was in agreement with the trend of the ratio of strong Lewis acid to the total acid amount. Although the amount of cokes deposited on ITQ-2-3 was larger than that on MCM-22, the former deactivated slowly, suggesting that a large external specific surface area benefits the stability of zeolite coatings,
