The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemi...The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemistry of its accessory minerals remains under-examined,posing challenges for resource assessment and ore prospecting.Utilizing electron microprobe analysis and LA-ICP-MS analysis,this study investigated the geochemical characteristics of apatite in ore-bearing granite and monzogranite porphyries,as well as granodiorite,quartz diorite,and dark diorite porphyries in the deposit.It also delved into the diagenetic and metallogenic information from these geochemical signatures.Key findings include:(1)The SiO_(2) content,rare earth element(REE)contents,and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries;(2)the volatile F and Cl contents in apatite,along with their ratio,indicate the Jiama deposit,formed in a collisional setting,demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment;(3)compared to non-ore-bearing rock bodies in other deposits formed in a collisional setting,apatite in the Jiama deposit exhibits lower Ce and Ga contents.This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity.Nevertheless,the marginal variation in oxygen fugacity between ore-bearing and non-ore-bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore-hosting potential of rock bodies in the Jiama deposit.展开更多
Jiama is a giant,high-grade porphyry copper system in the Gangdese metallogenic belt,Tibet.Multistage intermediate-felsic porphyries intruded in this deposit,some of which are strongly associated with copper-polymetal...Jiama is a giant,high-grade porphyry copper system in the Gangdese metallogenic belt,Tibet.Multistage intermediate-felsic porphyries intruded in this deposit,some of which are strongly associated with copper-polymetallic mineralization.These ore-bearing porphyries include monzogranite,granodiorite,and quartz diorite porphyries.A new granite aplite dyke was found in the south of Jiama.Its age,genesis,and relationship with ore-related magmatism are obscure.Here,its emplacement age and petrogenesis were determined using mineralogy,zircon U-Pb dating,geochemistry,and Sr-Nd-Pb isotope studies.The zircon LA-ICP-MS U-Pb age of the aplite dyke is 16.66±0.21 Ma(n=14,MSWD=0.66),earlier than that of the ore-bearing porphyries(~15 Ma)in Jiama.Furthermore,the aplite exhibits high amounts of silicon(SiO_(2)=73.39%-74.74%),potassium(K_(2)O=5.12%-6.61%),aluminum(Al_(2)O_(3)=14.25%-14.69%),and light/heavy rare earth elements(LREE/HREE=12.12-16.19)as well as negative europium(δEu=0.47-0.72)and weak negative cerium anomalies(δCe=0.84-0.93).The aplite dyke is characteristic of metaluminous-peraluminous I-type granite,which is rich in large-ion lithophile elements(Rb,Ba,Th and U)and depleted in high-field-strength elements(Nb,P and Ti).The aplite dyke and ore-bearing porphyries in the Jiama deposit are the results of a partial melting of the juvenile lower crust,according to whole-rock geochemistry and Sr-Nd-Pb isotope data,but the dyke and ore-bearing porphyries were emplaced from the same magma chamber at different times.Thus,the aplite dyke shows the composition of the early evolution stage of shallow magma in the Jiama deposit and is the product of rapid condensation and crystallization.展开更多
Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision...Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.展开更多
The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks： skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host ...The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks： skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host rocks to investigate the relationship between fluid evolution and ore-forming processes. Based on examination of cores from 36 drill holes, three types of veins （A, B and D） were identified in the porphyries, four types （I, II, III and IV） in the skarn, and three （a, b and c） in the hornfels. The crosscutting relationships of the veins and that of the host rocks suggest two hydrothermal stages, one early and one late stage. Fluid inclusions indicate that the Jiama hydrothermal fluid system underwent at least two episodes of fluid boiling. The first boiling event occurred during the early hydrothermal stage, as recorded by fluid inclusions hosted in type A veins in the porphyries, type a veins in the hornfels, and wollastonite in the skarns. This fluid boiling event was associated with relatively weak mineralization. The second boiling event occurred in the late hydrothermal stage, as determined from fluid inclusions hosted in type B and D veins in the porphyries, type I to IV veins in the skarns, and type b and c veins in the hornfels. This late boiling event, together with mixing with meteoric water, was responsible for more than 90% of the metal accumulation in the deposit. The first boiling only occurred in the central part of the deposit and the second boiling event took place across an entire interlayered structural zone between hornfels and marble. A spatial zoning of ore-elements is evident, and appears to be related to different migration pathways and precipitation temperatures of Cu, Mo, Pb, Zn, Au and Ag.展开更多
Geological setting Jiama copper\|polymetallic deposit is located at Maizhokunggar county, more than 20km away from the county town. Tectonically, it lies in the eastern sector of the Gangdise volcanic arc, occurring i...Geological setting Jiama copper\|polymetallic deposit is located at Maizhokunggar county, more than 20km away from the county town. Tectonically, it lies in the eastern sector of the Gangdise volcanic arc, occurring in the Jiama\|Rutog interarc basin. The interarc basin lies between the Poindo\|Songduo Mesozoic island chain zone in the northern side and the Jurassic\|Cretaceous south Gangdise island arc zone in the southern side. Jurassic marine carbonate and Cretaceous paralic clastic rock are exposed in the basin. Late Yanshan\|Himalaya tectonic deformation and magmatic veins are well developed. These provide good conditions for forming the copper\|polymetallic ore deposit. Jiama copper\|polymetallic deposit is the only large one explored in the Gangdise volcannic arc.展开更多
The Jiama porphyry copper deposit in Tibet is one of the proven supergiant copper deposits in the Qinghai-Tibet Plateau at present,with the reserves of geological resources equivalent to nearly 20×10^(6) t.Howeve...The Jiama porphyry copper deposit in Tibet is one of the proven supergiant copper deposits in the Qinghai-Tibet Plateau at present,with the reserves of geological resources equivalent to nearly 20×10^(6) t.However,it features wavy and steep terrain,leading to extremely difficult field operation and heavy interference.This study attempts to determine the effects of the tensor controlled-source audiomagnetotellurics(CSAMT)with high-power orthogonal signal sources(also referred to as the high-power tensor CSAMT)when it is applied to the deep geophysical exploration in plateaus with complex terrain and mining areas with strong interference.The test results show that the high current provided by the highpower tensor CSAMT not only greatly improved the signal-to-noise ratio but also guaranteed that effective signals were received in the case of a long transmitter-receiver distance.Meanwhile,the tensor data better described the anisotropy of deep geologic bodies.In addition,the tests also show that when the transmitting current reaches 60 A,it is still guaranteed that strong enough signals can be received in the case of the transmitter-receiver distance of about 25 km,sounding curves show no near field effect,and effective exploration depth can reach 3 km.The 2D inversion results are roughly consistent with drilling results,indicating that the high-power tensor CSAMT can be used to achieve nearly actual characteristics of underground electrical structures.Therefore,this method has great potential for application in deep geophysical exploration in plateaus and mining areas with complex terrain and strong interference,respectively.This study not only serves as important guidance on the prospecting in the Qinghai-Tibet Plateau but also can be used as positive references for deep mineral exploration in other areas.展开更多
It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well ...It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well as its periphery. The FT ages of apatites in the ore district are (16.1±0.9) Ma and (18.8±1.1) Ma and reflect the age of late period of hydrothermal mineralizing event. Apatite FT age of (22.0±4.3) Ma and zircon FT age of (20.9±2.0) Ma are related to the early period of mineralization. Another zircon FT age of (341.6±79.1) Ma, inheriting mineral source characteristic, has no connection with the mineralization. Based on the thermal history analysis, the mineralization began before 25-22 Ma. Cooling rate in the ore district is 5-6℃/Ma averagely, in which a slow cooling occurred at 90-80℃. About 2.7 km has been denuded and the denudation rate is higher than the uplifting rate.展开更多
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC2905001)the National Natural Science Foundation of China(Grant Nos.42272093,42230813)a geological survey project(Grant No.DD20230054).
文摘The Jiama deposit,a significant porphyry-skarn-type copper polymetallic deposit located within the Gangdese metallogenic belt in Tibet,China,exemplifies a typical porphyry metallogenic system.However,the mineral chemistry of its accessory minerals remains under-examined,posing challenges for resource assessment and ore prospecting.Utilizing electron microprobe analysis and LA-ICP-MS analysis,this study investigated the geochemical characteristics of apatite in ore-bearing granite and monzogranite porphyries,as well as granodiorite,quartz diorite,and dark diorite porphyries in the deposit.It also delved into the diagenetic and metallogenic information from these geochemical signatures.Key findings include:(1)The SiO_(2) content,rare earth element(REE)contents,and REE partition coefficients of apatite indicate that the dark diorite porphyry possibly does not share a cogenetic magma source with the other four types of porphyries;(2)the volatile F and Cl contents in apatite,along with their ratio,indicate the Jiama deposit,formed in a collisional setting,demonstrates lower Cl/F ratios in apatite than the same type of deposits formed in a subduction environment;(3)compared to non-ore-bearing rock bodies in other deposits formed in a collisional setting,apatite in the Jiama deposit exhibits lower Ce and Ga contents.This might indicate that rock bodies in the Jiama deposit have higher oxygen fugacity.Nevertheless,the marginal variation in oxygen fugacity between ore-bearing and non-ore-bearing rock bodies within the deposit suggests oxygen fugacity may not serve as the decisive factor in the ore-hosting potential of rock bodies in the Jiama deposit.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFC2905001)National Natural Science Foundation of China(Grant Nos.42272093 and 42230813)+2 种基金Basic Research Fund of Chinese Academy of Geological Sciences(Grant Nos.JKYZD202316,KJ2102,KK2116,and JKY202208)Geological Survey Project(Grant No.DD20221684)China Scholarship Council(Grant No.CSC202206400059)。
文摘Jiama is a giant,high-grade porphyry copper system in the Gangdese metallogenic belt,Tibet.Multistage intermediate-felsic porphyries intruded in this deposit,some of which are strongly associated with copper-polymetallic mineralization.These ore-bearing porphyries include monzogranite,granodiorite,and quartz diorite porphyries.A new granite aplite dyke was found in the south of Jiama.Its age,genesis,and relationship with ore-related magmatism are obscure.Here,its emplacement age and petrogenesis were determined using mineralogy,zircon U-Pb dating,geochemistry,and Sr-Nd-Pb isotope studies.The zircon LA-ICP-MS U-Pb age of the aplite dyke is 16.66±0.21 Ma(n=14,MSWD=0.66),earlier than that of the ore-bearing porphyries(~15 Ma)in Jiama.Furthermore,the aplite exhibits high amounts of silicon(SiO_(2)=73.39%-74.74%),potassium(K_(2)O=5.12%-6.61%),aluminum(Al_(2)O_(3)=14.25%-14.69%),and light/heavy rare earth elements(LREE/HREE=12.12-16.19)as well as negative europium(δEu=0.47-0.72)and weak negative cerium anomalies(δCe=0.84-0.93).The aplite dyke is characteristic of metaluminous-peraluminous I-type granite,which is rich in large-ion lithophile elements(Rb,Ba,Th and U)and depleted in high-field-strength elements(Nb,P and Ti).The aplite dyke and ore-bearing porphyries in the Jiama deposit are the results of a partial melting of the juvenile lower crust,according to whole-rock geochemistry and Sr-Nd-Pb isotope data,but the dyke and ore-bearing porphyries were emplaced from the same magma chamber at different times.Thus,the aplite dyke shows the composition of the early evolution stage of shallow magma in the Jiama deposit and is the product of rapid condensation and crystallization.
基金supported by the National Key Research and Development Program of China (2022YFC2905001)the National Natural Science Foundation of China (42272093,42230813)+1 种基金China Scholarship Council projectthe Geological Survey project (DD20230054)
文摘Jiama,with more than 11 Mt of copper metal,is the largest porphyry-skarn copper system in the Gangdese metallogenic belt,Tibet,China,creating ideal conditions for deciphering the origin of porphyry ores in a collision setting.Despite massive studies of the geology,chronology,petrogenesis,and ore-related fluids and their sources in Jiama,there is a lack of systematic summaries and reviews of this system.In contrast to traditional porphyry copper systems in a subduction setting,recent studies and exploration suggest that the Jiama deposit includes porphyry-type Mo-Cu,skarn-type Cu polymetallic,vein-type Au and manto orebodies.This paper reviews the latest studies on the geology,chronology,petrogenesis,fluid inclusions,and isotopic geochemistry(hydrogen,oxygen,sulfur,and lead)of the Jiama deposit.Accordingly,a multi-center complex mineralization model was constructed,indicating that multi-phase intrusions from the same magma reservoir can form multiple hydrothermal centers.These centers are mutually independent and form various orebodies or are superimposed on each other and form thick,high-grade orebodies.Finally,a new comprehensive exploration model was established for the Jiama porphyry copper system.Both models established in this study help to refine the theories on continental-collision metallogeny and porphyry copper systems.
基金funded by the third subject of National Natural Science Foundation of China(41302060)Geological Survey Project(12120114001304,121201004000150012)
文摘The Jiama deposit is a large copper deposit in Tibet. Mineralization occurs in three different host rocks： skarn, hornfels and porphyry. A detailed fluid inclusion study was conducted for veins in the different host rocks to investigate the relationship between fluid evolution and ore-forming processes. Based on examination of cores from 36 drill holes, three types of veins （A, B and D） were identified in the porphyries, four types （I, II, III and IV） in the skarn, and three （a, b and c） in the hornfels. The crosscutting relationships of the veins and that of the host rocks suggest two hydrothermal stages, one early and one late stage. Fluid inclusions indicate that the Jiama hydrothermal fluid system underwent at least two episodes of fluid boiling. The first boiling event occurred during the early hydrothermal stage, as recorded by fluid inclusions hosted in type A veins in the porphyries, type a veins in the hornfels, and wollastonite in the skarns. This fluid boiling event was associated with relatively weak mineralization. The second boiling event occurred in the late hydrothermal stage, as determined from fluid inclusions hosted in type B and D veins in the porphyries, type I to IV veins in the skarns, and type b and c veins in the hornfels. This late boiling event, together with mixing with meteoric water, was responsible for more than 90% of the metal accumulation in the deposit. The first boiling only occurred in the central part of the deposit and the second boiling event took place across an entire interlayered structural zone between hornfels and marble. A spatial zoning of ore-elements is evident, and appears to be related to different migration pathways and precipitation temperatures of Cu, Mo, Pb, Zn, Au and Ag.
文摘Geological setting Jiama copper\|polymetallic deposit is located at Maizhokunggar county, more than 20km away from the county town. Tectonically, it lies in the eastern sector of the Gangdise volcanic arc, occurring in the Jiama\|Rutog interarc basin. The interarc basin lies between the Poindo\|Songduo Mesozoic island chain zone in the northern side and the Jurassic\|Cretaceous south Gangdise island arc zone in the southern side. Jurassic marine carbonate and Cretaceous paralic clastic rock are exposed in the basin. Late Yanshan\|Himalaya tectonic deformation and magmatic veins are well developed. These provide good conditions for forming the copper\|polymetallic ore deposit. Jiama copper\|polymetallic deposit is the only large one explored in the Gangdise volcannic arc.
基金supported by the National Key Research and Development Program of China(2018YFC0604102)the project of China Geological Survey(DD20190015)。
文摘The Jiama porphyry copper deposit in Tibet is one of the proven supergiant copper deposits in the Qinghai-Tibet Plateau at present,with the reserves of geological resources equivalent to nearly 20×10^(6) t.However,it features wavy and steep terrain,leading to extremely difficult field operation and heavy interference.This study attempts to determine the effects of the tensor controlled-source audiomagnetotellurics(CSAMT)with high-power orthogonal signal sources(also referred to as the high-power tensor CSAMT)when it is applied to the deep geophysical exploration in plateaus with complex terrain and mining areas with strong interference.The test results show that the high current provided by the highpower tensor CSAMT not only greatly improved the signal-to-noise ratio but also guaranteed that effective signals were received in the case of a long transmitter-receiver distance.Meanwhile,the tensor data better described the anisotropy of deep geologic bodies.In addition,the tests also show that when the transmitting current reaches 60 A,it is still guaranteed that strong enough signals can be received in the case of the transmitter-receiver distance of about 25 km,sounding curves show no near field effect,and effective exploration depth can reach 3 km.The 2D inversion results are roughly consistent with drilling results,indicating that the high-power tensor CSAMT can be used to achieve nearly actual characteristics of underground electrical structures.Therefore,this method has great potential for application in deep geophysical exploration in plateaus and mining areas with complex terrain and strong interference,respectively.This study not only serves as important guidance on the prospecting in the Qinghai-Tibet Plateau but also can be used as positive references for deep mineral exploration in other areas.
基金the National Natural Science Foundation of China (Grant No.40072068) and the President Fund of the Chinese Academy of Sciences (Grant No. 99-775), and Laboratory of Nuclear Analysis Technique, CAS.
文摘It is a new attempt to study thermal evolution related to mineralization using the fission track (FT) method. Apatite and zircon fission track data are reported for 6 samples collected from Jiama ore district as well as its periphery. The FT ages of apatites in the ore district are (16.1±0.9) Ma and (18.8±1.1) Ma and reflect the age of late period of hydrothermal mineralizing event. Apatite FT age of (22.0±4.3) Ma and zircon FT age of (20.9±2.0) Ma are related to the early period of mineralization. Another zircon FT age of (341.6±79.1) Ma, inheriting mineral source characteristic, has no connection with the mineralization. Based on the thermal history analysis, the mineralization began before 25-22 Ma. Cooling rate in the ore district is 5-6℃/Ma averagely, in which a slow cooling occurred at 90-80℃. About 2.7 km has been denuded and the denudation rate is higher than the uplifting rate.
