采用柠檬酸溶胶 凝胶法制备的Ce Zr La O固溶体为载体,制备CuO Ce Zr La O催化剂,用XRD,Raman,TPR等实验技术对Ce Zr La O固溶体及CuO Ce Zr La O的物相、Redox性能进行了表征。实验结果表明,Ce0.7Zr0 3-yLayO固溶体的还原性能与La含量...采用柠檬酸溶胶 凝胶法制备的Ce Zr La O固溶体为载体,制备CuO Ce Zr La O催化剂,用XRD,Raman,TPR等实验技术对Ce Zr La O固溶体及CuO Ce Zr La O的物相、Redox性能进行了表征。实验结果表明,Ce0.7Zr0 3-yLayO固溶体的还原性能与La含量有关,适量的La能促进固溶体的氧化还原。CuO的负载量为6%时,CuO Ce0.7Zr0.15La0.15O的活性最高,高分散且与载体相互作用的CuO是CO氧化活性相。展开更多
The Ce-Zr-La-O solid solution was prepared by the sol-gel method. Thestructure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts wereinvestigated by using XRD, Raman and TPR techniques. ...The Ce-Zr-La-O solid solution was prepared by the sol-gel method. Thestructure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts wereinvestigated by using XRD, Raman and TPR techniques. The result shows that the reduction capabilityof Ce_(0.7)Zr_(0.3-y)La_yO solid solution is related to content of La. Appropriate content of La canenhance the redox capability of the solid solution. The oxidation activity of the CuO (6 percent)/Ce_(0.7)Zr_(0.15)La_(0.15)O catalyst is the highest. CuO, which finely dispersed and interacted withthe support, is the site of oxidation activity.展开更多
The main goal of this study is to investigate the microstructure and electrical properties of Al–Zr–La alloys under different hot compression deformation temperatures. In particular, a Gleeble 3500 thermal simulator...The main goal of this study is to investigate the microstructure and electrical properties of Al–Zr–La alloys under different hot compression deformation temperatures. In particular, a Gleeble 3500 thermal simulator was used to carry out multi-pass hot compression tests. For five-pass hot compression deformation, the last-pass deformation temperatures were 240, 260, 300, 340, 380, and 420°C, respectively, where the first-pass deformation temperature was 460°C. The experimental results indicated that increasing the hot compression deformation temperature with each pass resulted in improved electrical conductivity of the alloy. Consequently, the flow stress was reduced after deformation of the samples subjected to the same number of passes. In addition, the dislocation density gradually decreased and the grain size increased after hot compression deformation. Furthermore, the dynamic recrystallization behavior was effectively suppressed during the hot compression process because spherical Al;Zr precipitates pinned the dislocation movement effectively and prevented grain boundary sliding.展开更多
A series of catalysts with (Ce-Zr-La-Pr)O contents range from 0 to 50% in coating and single-palladium loads on substrates were prepared to study effects of (Ce-Zr-La-Pr)O contents on catalytic activities and durabili...A series of catalysts with (Ce-Zr-La-Pr)O contents range from 0 to 50% in coating and single-palladium loads on substrates were prepared to study effects of (Ce-Zr-La-Pr)O contents on catalytic activities and durability by contrasting the characteristics of light-off, A/F and catalytic conversions of the fresh catalysts with that of the aged catalysts. The results show that (Ce-Zr-La-Pr)O can enhance the catalysts light-off characteristics, widen A/F windows and increase catalytic conversions at a certain extent through optimizing physical structural and chemical property of the mixed coating. However, (Ce-Zr-La-Pr)O contents influence greatly on the catalysts activities and durability, and the catalysts with contents ranging from 10% to 30% exhibited better integrative properties in all samples, and 10% was the optical content to make the catalyst performance highest in this thesis. It is indicated that an suitable content of (Ce-Zr-La-Pr)O plays an important role in assisting catalysis, enhancing durability and increasing oxygen storage capability.展开更多
The Co3O4 and Zr-,Ce-,and La-Co3O4 catalysts were prepared,characterized,and applied to produce CH4 from CO2 catalytic hydrogenation in low temperature as 140–220℃.The results indicated that the addition of Zr,Ce,or...The Co3O4 and Zr-,Ce-,and La-Co3O4 catalysts were prepared,characterized,and applied to produce CH4 from CO2 catalytic hydrogenation in low temperature as 140–220℃.The results indicated that the addition of Zr,Ce,or La to the Co3O4 decreased the crystallite sizes of Co and the outer-shell electron density of Co^3＋,and increased the specific surface area,which would provide more active sites for the CO2 methanation.Especially,the addition of Zr also changed the reducing state of Co3O4 via an obvious change in the interaction between Co3O4 and ZrO2.Furthermore,Zr doped into the Co3O4 increased the basic intensity of the weak and medium basic sites,as well as the amount of Lewis acid sites,and Bronsted acid sites were also found on the Zr-Co3O4 surface.The introduction of Zr,Ce,or La favored the production of CH4,and the Zr-Co3O4catalyst exhibited the highest CO2 conversion（58.2%）and CH4 selectivity（100%）at 200℃,and 0.5 MPa with a gaseous hourly space velocity of 18,000 ml·g^-1（cat）·h^-1,and the catalytic activity of CO2methanation for the Zr-,Ce-,and La-Co3O4 exhibited more stable than Co3O4 in a 20-h reaction.展开更多
Ti45Zr30Ni25 and Ti45Zr30Ni25La alloys were prepared by melt-spinning, and the phase structure and electrochemical performances of the melt-spun alloys were investigated. The results showed that the Ti45Zr30Ni25 alloy...Ti45Zr30Ni25 and Ti45Zr30Ni25La alloys were prepared by melt-spinning, and the phase structure and electrochemical performances of the melt-spun alloys were investigated. The results showed that the Ti45Zr30Ni25 alloy was composed of the quasicrystalline phase, amorphous phase and Laves phase. The Ti45Zr30Ni25La alloy contained quasicrystalline and amorphous phases. The maximum discharge capacity was 111 mAh/g for the Ti45Zr30Ni25 alloy electrode, and 124 mAh/g for the Ti45Zr30Ni25La alloy electrode. The Ti45Zr30Ni25La alloy electrode exhibited a better high-rate dischargeability and cycling stability than the Ti45Zr30Ni25 alloy electrode. The improvement of electrochemical properties was mainly ascribed to the increase in the amorphous phase due to the addition of La.展开更多
文摘采用柠檬酸溶胶 凝胶法制备的Ce Zr La O固溶体为载体,制备CuO Ce Zr La O催化剂,用XRD,Raman,TPR等实验技术对Ce Zr La O固溶体及CuO Ce Zr La O的物相、Redox性能进行了表征。实验结果表明,Ce0.7Zr0 3-yLayO固溶体的还原性能与La含量有关,适量的La能促进固溶体的氧化还原。CuO的负载量为6%时,CuO Ce0.7Zr0.15La0.15O的活性最高,高分散且与载体相互作用的CuO是CO氧化活性相。
基金"863" Program (2006AA05Z132)National Natural Science Foundations of China (50871050 and 50701011)+1 种基金Natural Science Foundation of Inner Mongolia,China (200711020703)High Education Science Research Project of Inner Mongolia,China (NJzy08071)
基金supported by the National Natural Science Foundation of China (21173153)the Science and Technology Department of Science and Technology Support Project of Sichuan Province,China (2011GZ0035)~~
文摘The Ce-Zr-La-O solid solution was prepared by the sol-gel method. Thestructure and the redox behavior of Ce-Zr-La-O solid solution and CuO/Ce-Zr-La-O catalysts wereinvestigated by using XRD, Raman and TPR techniques. The result shows that the reduction capabilityof Ce_(0.7)Zr_(0.3-y)La_yO solid solution is related to content of La. Appropriate content of La canenhance the redox capability of the solid solution. The oxidation activity of the CuO (6 percent)/Ce_(0.7)Zr_(0.15)La_(0.15)O catalyst is the highest. CuO, which finely dispersed and interacted withthe support, is the site of oxidation activity.
基金Sichuan Provincial Development and Reform Commission for funding this work by Panxi Strategic Resources Innovation Development Fund (2015)the department of Science and Technology of Sichuan Province (2015GZ0052)
文摘The main goal of this study is to investigate the microstructure and electrical properties of Al–Zr–La alloys under different hot compression deformation temperatures. In particular, a Gleeble 3500 thermal simulator was used to carry out multi-pass hot compression tests. For five-pass hot compression deformation, the last-pass deformation temperatures were 240, 260, 300, 340, 380, and 420°C, respectively, where the first-pass deformation temperature was 460°C. The experimental results indicated that increasing the hot compression deformation temperature with each pass resulted in improved electrical conductivity of the alloy. Consequently, the flow stress was reduced after deformation of the samples subjected to the same number of passes. In addition, the dislocation density gradually decreased and the grain size increased after hot compression deformation. Furthermore, the dynamic recrystallization behavior was effectively suppressed during the hot compression process because spherical Al;Zr precipitates pinned the dislocation movement effectively and prevented grain boundary sliding.
文摘A series of catalysts with (Ce-Zr-La-Pr)O contents range from 0 to 50% in coating and single-palladium loads on substrates were prepared to study effects of (Ce-Zr-La-Pr)O contents on catalytic activities and durability by contrasting the characteristics of light-off, A/F and catalytic conversions of the fresh catalysts with that of the aged catalysts. The results show that (Ce-Zr-La-Pr)O can enhance the catalysts light-off characteristics, widen A/F windows and increase catalytic conversions at a certain extent through optimizing physical structural and chemical property of the mixed coating. However, (Ce-Zr-La-Pr)O contents influence greatly on the catalysts activities and durability, and the catalysts with contents ranging from 10% to 30% exhibited better integrative properties in all samples, and 10% was the optical content to make the catalyst performance highest in this thesis. It is indicated that an suitable content of (Ce-Zr-La-Pr)O plays an important role in assisting catalysis, enhancing durability and increasing oxygen storage capability.
基金Supported by the National Natural Science Foundation of China(21366004)Guangxi Natural Science Foundation(2016GXNSFFA380015)the Dean Project of Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology(2016Z003)
文摘The Co3O4 and Zr-,Ce-,and La-Co3O4 catalysts were prepared,characterized,and applied to produce CH4 from CO2 catalytic hydrogenation in low temperature as 140–220℃.The results indicated that the addition of Zr,Ce,or La to the Co3O4 decreased the crystallite sizes of Co and the outer-shell electron density of Co^3＋,and increased the specific surface area,which would provide more active sites for the CO2 methanation.Especially,the addition of Zr also changed the reducing state of Co3O4 via an obvious change in the interaction between Co3O4 and ZrO2.Furthermore,Zr doped into the Co3O4 increased the basic intensity of the weak and medium basic sites,as well as the amount of Lewis acid sites,and Bronsted acid sites were also found on the Zr-Co3O4 surface.The introduction of Zr,Ce,or La favored the production of CH4,and the Zr-Co3O4catalyst exhibited the highest CO2 conversion（58.2%）and CH4 selectivity（100%）at 200℃,and 0.5 MPa with a gaseous hourly space velocity of 18,000 ml·g^-1（cat）·h^-1,and the catalytic activity of CO2methanation for the Zr-,Ce-,and La-Co3O4 exhibited more stable than Co3O4 in a 20-h reaction.
基金supported by the National Natural Science Foundation of China (No. 50571094)the Doctoral Foundation of Henan Polytechnic University, China (No. 648248)
文摘Ti45Zr30Ni25 and Ti45Zr30Ni25La alloys were prepared by melt-spinning, and the phase structure and electrochemical performances of the melt-spun alloys were investigated. The results showed that the Ti45Zr30Ni25 alloy was composed of the quasicrystalline phase, amorphous phase and Laves phase. The Ti45Zr30Ni25La alloy contained quasicrystalline and amorphous phases. The maximum discharge capacity was 111 mAh/g for the Ti45Zr30Ni25 alloy electrode, and 124 mAh/g for the Ti45Zr30Ni25La alloy electrode. The Ti45Zr30Ni25La alloy electrode exhibited a better high-rate dischargeability and cycling stability than the Ti45Zr30Ni25 alloy electrode. The improvement of electrochemical properties was mainly ascribed to the increase in the amorphous phase due to the addition of La.
