Simulation of Gas-Fired Triple-Effect LiBr/Water Absorption Cooling System with Exhaust Heat Recovery Generator

An exhaust heat recovery generator is proposed to be integrated with conventional gas-fired triple-effect LiBr/water absorption cooling cycles to improve system energy efficiency. As a case study, simulation of the novel cycle based on promising parallel flow with cooling capacity of 1 150 kW is carried out under various heat recovery generator vapor production ratios ranging from 0 to 3.5%. The life cycle saving economic analysis, for which the annual gas conservation is estimated with Bin method, is employed to prove the worthiness of extra expenditure. Results show that the optimum gas saving revenue is obtained at 2.8% heat recovery generator vapor production ratio with 42 kW exhaust heat recovered, and the system energy efficiency is improved from 1.78 to 1.83. The initial investment of exchanger can be paid back within 7 years and 9 000 CNY of gas saving revenue will be achieved over the 15-year life cycle of the machine. This technology can be easily implemented and present desirable economic effects, which is feasible to the development of triple-effect absorption cycles.

Multi-Model Approach for Assessing the Influence of Calibration Criteria on the Water Balance in Ouémé Basin

Hydrological models are very useful tools for evaluating water resources, and the hydroclimatic hazards associated with the water cycle. However, their calibration and validation require the use of performance criteria which choice is not straightforward. This paper aims to evaluate the influence of the performance criteria on water balance components and water extremes using two global rainfall-runoff models (HBV and GR4J) over the Ouémé watershed at the Bonou and Savè outlets. Three (3) Efficacy criteria (Nash, coefficient of determination, and KGE) were considered for calibration and validation. The results show that the Nash criterion provides a good assessment of the simulation of the different parts of the hydrograph. KGE is better for simulating peak flows and water balance elements than other efficiency criteria. This study could serve as a basis for the choice of performance criteria in hydrological modelling.

Assessment of Water Quality in High-Pressure Peruvian Anthropic Sectors of Lake Titicaca Using a Calibrated Index

The world’s lakes are in the process of degradation, with loss of water quality as a result of anthropic influences. This research aimed to evaluate water quality in high-pressure Peruvian anthropic sectors of Lake Titicaca using a calibrated index. The study considered ten important bays with influence from urban sectors. In each bay, surface waters were monitored for six years, considering physical, chemical and microbiological parameters. Water quality was assessed using the NSF Water Quality Index (NSF-WQI) and the one calibrated for Lake Titicaca (WQIT). Comparing the efficiency of these two indices, the WQIT showed a variation from moderately polluted bays to bad quality bays, such as Desaguadero and Yunguyo. These two bays were classified as hypereutrophic, therefore, the uses attributable to this condition are only irrigation and energy production. Applying the NSF-WQI, the results were not able to identify this significative difference, as all bays were classified as moderate quality waters. This result indicates that the WQIT calibration was adequate, as it allows inferring and estimating the water quality of Lake Titicaca with greater precision. According to Peru’s water quality standard for category 4, established for the conservation of the country’s lakes, the parameters that exceeded the standard values were PO4-P (0.035 mg∙L−1) and BOD5 (5 mg∙L−1) in all bays, and TC (1000 MPN mL−1) in Yunguyo bay. These high values indicate eutrophication processes, one of the main problems in the study area. The WQIT calibrated for Lake Titicaca can be used as an efficient tool to assess water quality in high Andean lentic waterbodies in South America.

Bimetallic Single‑Atom Catalysts for Water Splitting

Green hydrogen from water splitting has emerged as a critical energy vector with the potential to spearhead the global transition to a fossil fuel-independent society.The field of catalysis has been revolutionized by single-atom catalysts(SACs),which exhibit unique and intricate interactions between atomically dispersed metal atoms and their supports.Recently,bimetallic SACs(bimSACs)have garnered significant attention for leveraging the synergistic functions of two metal ions coordinated on appropriately designed supports.BimSACs offer an avenue for rich metal–metal and metal–support cooperativity,potentially addressing current limitations of SACs in effectively furnishing transformations which involve synchronous proton–electron exchanges,substrate activation with reversible redox cycles,simultaneous multi-electron transfer,regulation of spin states,tuning of electronic properties,and cyclic transition states with low activation energies.This review aims to encapsulate the growing advancements in bimSACs,with an emphasis on their pivotal role in hydrogen generation via water splitting.We subsequently delve into advanced experimental methodologies for the elaborate characterization of SACs,elucidate their electronic properties,and discuss their local coordination environment.Overall,we present comprehensive discussion on the deployment of bimSACs in both hydrogen evolution reaction and oxygen evolution reaction,the two half-reactions of the water electrolysis process.

Dielectric Relaxation of Adsorbed Water in Wood Cell Wall under Equilibrium and Non-Equilibrium State

This article summarized systematically the previous investigations on t he dielectric relaxation of wood, the main substances and extractives in wood at oven-dry state, and the dielectric relaxation based on the adsorbed water in w o od cell wall under equilibrium and non-equilibrium state. Moreover, some expect a tions for future research were proposed on this basis. The purpose of this artic le is to provide other researchers an overall understanding about the research i n this region, and further to promote the research onto a new and higher level.

VAPOR-LIQUID EQUILIBRIA FOR PROPYLENE -METHANOL-WATER SYSTEM

In this article VLE data for a ternary system (propylene-methanol-water) under 30～60 C,0. 3～0. 9 MPa with a mass ratio of methanol to water of 9:1, 8: 2, 7: 3 were determined with a static equilibrium still, and were correlated by using Peng-Robinson model. The average relative error ofpropylene concentration in liquid phase is 1. 46 %. The results indicate that the models are very suitablefor the ternary system and the data are reliable.

纳米TiO_(2)对NH_(3)-H_(2)O-LiBr工质降膜吸收性能的影响

为了探讨纳米TiO_(2)对三元NH_(3)-H_(2)O-LiBr工质降膜吸收的影响,本文利用数值分析建立了三元工作流体薄膜吸收的连续方程、能量方程和组分质量平衡方程,采用Matlab软件进行编程和计算纳米流体的降膜吸收性能,将其与实验数据进行对比验证,并进一步分析了纳米TiO_(2)质量分数、初始氨浓度、初始温度、冷却水进口温度、吸收压力和下降薄膜管长度对薄膜吸收性能的影响。研究表明:添加纳米TiO_(2)可以增强降膜吸收的传质速率,主要原因为液膜中氨的扩散系数增加。当纳米TiO_(2)质量分数从0%增加到0.1%、0.3%和0.5%时,扩散系数分别增加了3.44倍、6.42倍和11.76倍。此外,增加初始氨浓度、降低初始温度、提高冷却水进口温度或降低吸收压力都可以提高最终溶液的饱和度。

Phase equilibria for the pseudo-ternary system(NaCl+Na2SO4+H2O)of coal gasification wastewater at T=(268.15 to 373.15)K

The pseudo-ternary system(Na Cl + Na_2SO_4+ H_2O) of coal gasification wastewater was studied at T =(268.15 to 373.15) K. The solubility and density of the equilibrium liquid phase were determined by the isothermal solution saturation method. The equilibrium solids were also investigated by the Schreinemaker's method of wet residues and X-ray powder diffraction(XRD). According to the experimental data, the phase diagrams were determined. It was found that there was no significant solubility difference on the Na Cl-rich side between the ternary system(Na Cl + Na_2SO_4+ H_2O) in coal gasification wastewater and in pure water. However, the solubility on the Na_2SO_4-rich side of coal gasification wastewater was apparently higher than that of pure water. The increase in the solubility of Na_2SO_4 was most likely caused by the effects of other impurities apart from Na Cl and Na_2SO_4 in coal gasification wastewater. The measured data and phase equilibrium diagrams can provide fundamental basis for salt recovery in coal gasification wastewater.

VAPOR-LIQUID EQUILIBRIA OF N METHYLPYRROLIDONE(1)-WATER(2) BINARY SYSTEM BY AN EBULLIOMETER

1 INTRODUCTIONVapor-liquid equilibrium（VLE）data are useful for the study of solution properties ofnon-ideal mixtures as well as for the design of the separation equipment.Then-methylpyrrolidone（NMP）is a new-type and excellent solvent which can be used in somechemical engineering separation processes.The NMP sucks up moisture so easily that it isnecessary to study the VLE relations of the NMP-H2O binary system,

Catalytic Effect of Activated Carbon and Activated Carbon Fiber in Non-Equilibrium Plasma-Based Water Treatment

Catalysis and regeneration efficiency of granular activated carbon （GAC） and activated carbon fiber （ACF） were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange （MO） by the combined treatment can increase 22% （for GAC） and 24% （for ACF） respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H202 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.

Effect of Mg^(2+) content in ion-exchanged Shengli lignite on its equilibrium adsorption water content and its mechanism

Mg ion-exchanged samples were prepared with acid-washed Shengli lignite.The chemical composition of the ash of the raw sample was determined by X-ray fluorescence.The equilibrium adsorption water contents of samples were determined in a range of relative humidity.The ion-exchange process was characterized by FT-IR,ash content,and p H value.A possible mechanism is proposed for equilibrium adsorption water of ion-exchanged samples at different humidities.The extent of ion-exchange reaction between Mg2+and lignite is controlled by the concentration of Mg2+in Mg SO4solution.The effect of Mg2+on equilibrium adsorption water content varies with relative humidity and content of Mg2+.The factor that controls equilibrium adsorption water content at low relative humidity is water interactions with sorption sites,which are Mg2+–carboxyl group complex.At middle relative humidity capillary force between Mg2+–water clusters Mg+(H2O)nand capillary is more important.At high relative humidity,free water–free water interactions are more significant.

Permeability evolution and gas flow in wet coal under non-equilibrium state:Considering both water swelling and process-based gas swelling

Accurate knowledge of gas flow within the reservoir and related controlling factors will be important for enhancing the production of coal bed methane.At present,most studies focused on the permeability evolution of dry coal under gas adsorption equilibrium,gas flow and gas diffusion within wet coal under the generally non-equilibrium state are often ignored in the process of gas recovery.In this study,an improved apparent permeability model is proposed which accommodates the water and gas adsorption,stress dependence,water film thickness and gas flow regimes.In the process of modeling,the water adsorption is only affected by water content while the gas adsorption is time and water content dependent;based on poroelastic mechanics,the effective fracture aperture and effective pore radius are derived;and then the variation in water film thickness for different pore types under the effect of water content,stress and adsorption swelling are modeled;the flow regimes are considered based on Beskok’s model.Further,after validation with experimental data,the proposed model was applied to numerical simulations to investigate the evolution of permeability-related factors under the effect of different water contents.The gas flow in wet coal under the non-equilibrium state is explicitly revealed.

Preparation and water sorption properties of novel SiO_(2)-LiBr microcapsules for water-retaining pavement

Novel SiO_(2)-LiBr microcapsules for water-retaining pavement were prepared and firstly characterized by scanning electron microscope(SEM),particle size analysis,and Fourier transform infrared spectroscopy(FT-IR).The water vapor sorption and desorption of the formulated microcapsules was then experimentally studied using dynamic vapor sorption(DVS),with the results fitted to three kinds of adsorption kinetics models.In addition,the specific surface area(SSA)was also calculated based on BET theory;and the thermal performance was investigated by laser flash analysis(LFA).Experimental results show a change of 103%in mass of the microcapsule sample under 90%relative humidity(RH)at 30℃after water vapor sorption.The fitting of results indicates that the adsorption process is mainly governed by the intra-particle diffusion mechanism,followed by the pseudo-first-order adsorption process.In comparison with most conventional pavement materials,it is found that the SSA of the formulated microcapsules is much larger while the thermal conductivity is lower.The unique properties of the formulated SiO_(2)-LiBr microcapsules have significant potential to take the edge off the urban heat island effect and reduce rutting when applied to water-retaining pavement materials.

Experimental Measurements and Correlations Isobaric Vapor-Liquid Equilibria for Water ＋ Acetic Acid ＋ Sec-butyl Acetate at 101.3 kPa

Isobaric vapor-liquid equilibrium(VLE) data for acetic acid + sec-butyl acetate and water+acetic acid + sec-butyl acetate systems were determined at 101.3 kPa using a modified Rose type.The nonideality of the vapor phase caused by the association of the acetic acid was corrected by the chemical theory and Hayden-O'Connell method.Thermodynamic consistency was tested for the binary VLE data.The experimental data were correlated successfully with the Non-Random Two Liquids(NRTL) model.The Root Mean Square Deviation(RMSD) of the ternary system was 0.0038.The saturation vapor pressure of sec-butyl acetate at 329 to 385 K was measured by means of two connected equilibrium cells.The vapor pressures of water and sec-butyl acetate were correlated with the Antoine equation.The binary interaction parameters and the ternary VLE data were obtained from this work.

Moving-Water Equilibria Preserving HLL-Type Schemes for the Shallow Water Equations

We construct new HLL-type moving-water equilibria preserving upwind schemes for the one-dimensional Saint-Venant system of shallow water equations with nonflat bottom topography.The designed first-and secondorder schemes are tested on a number of numerical examples,in which we verify the well-balanced property as well as the ability of the proposed schemes to accurately capture small perturbations of moving-water steady states.

Progress and prospects of EOR technology in deep,massive sandstone reservoirs with a strong bottom-water drive

The Triassic massive sandstone reservoir in the Tahe oilfield has a strong bottom-water drive and is characterized by great burial depth,high temperature and salinity,a thin pay zone,and strong heterogeneity.At present,the water-cut is high in each block within the reservoir;some wells are at an ultrahigh water-cut stage.A lack of effective measures to control water-cut rise and stabilize oil production have necessitated the application of enhanced oil recovery(EOR)technology.This paper investigates the development and technological advances for oil reservoirs with strong edge/bottom-water drive globally,and compares their application to reservoirs with characteristics similar to the Tahe oilfield.Among the technological advances,gas injection from the top and along the direction of structural dip has been used to optimize the flow field in a typical bottom-water drive reservoir.Bottom-water coning is restrained by gas injection-assisted water control.In addition,increasing the lateral driving pressure differential improves the plane sweep efficiency which enhances oil recovery in turn.Gas injection technology in combination with technological measures like channeling prevention and blocking,and water plugging and profile control,can achieve better results in reservoir development.Gas flooding tests in the Tahe oilfield are of great significance to identifying which EOR technology is the most effective and has the potential of large-scale application for improving development of deep reservoirs with a strong bottomwater drive.

Insights on advanced substrates for controllable fabrication of photoanodes toward efficient and stable photoelectrochemical water splitting

Conversion of solar energy into H_(2) by photoelectrochemical(PEC)water splitting is recognized as an ideal way to address the growing energy crisis and environmental issues.In a typical PEC cell,the construction of photoanodes is crucial to guarantee the high efficiency and stability of PEC reactions,which fundamentally rely on rationally designed semiconductors(as the active materials)and substrates(as the current collectors).In this review work,we start with a brief introduction of the roles of substrates in the PEC process.Then,we provide a systematic overview of representative strategies for the controlled fabrication of photoanodes on rationally designed substrates,including conductive glass,metal,sapphire,silicon,silicon carbide,and flexible substrates.Finally,some prospects concerning the challenges and research directions in this area are proposed.

The Vapor－Liquid Equilibrium of the Quaternary Reactive System Methyl acetate－Methanol－Water－Acetic Acid

ＴｈｅＶａｐｏｒ－ＬｉｑｕｉｄＥｑｕｉｌｉｂｒｉｕｍｏｆｔｈｅＱｕａｔｅｒｎａｒｙＲｅａｃｔｉｖｅＳｙｓｔｅｍＭｅｔｈｙｌａｃｅｔａｔｅ－Ｍｅｔｈａｎｏｌ－Ｗａｔｅｒ－ＡｃｅｔｉｃＡｃｉｄＷａｎｇＬｉａｎｇｅｎ；ＺｈａｏＳｈｕｙｎｇ（Ｄｅｐａｒｔｍｅ...

Classification and technical target of water electrolysis for hydrogen production

Continuous efforts are underway to reduce carbon emissions worldwide in response to global climate change.Water electrolysis technology,in conjunction with renewable energy,is considered the most feasible hydrogen production technology based on the viable possibility of large-scale hydrogen production and the zero-carbon-emission nature of the process.However,for hydrogen produced via water electrolysis systems to be utilized in various fields in practice,the unit cost of hydrogen production must be reduced to$1/kg H_(2).To achieve this unit cost,technical targets for water electrolysis have been suggested regarding components in the system.In this paper,the types of water electrolysis systems and the limitations of water electrolysis system components are explained.We suggest guideline with recent trend for achieving this technical target and insights for the potential utilization of water electrolysis technology.

Development of advanced anion exchange membrane from the view of the performance of water electrolysis cell

Green hydrogen produced by water electrolysis combined with renewable energy is a promising alternative to fossil fuels due to its high energy density with zero-carbon emissions.Among water electrolysis technologies,the anion exchange membrane(AEM) water electrolysis has gained intensive attention and is considered as the next-generation emerging technology due to its potential advantages,such as the use of low-cost non-noble metal catalysts,the relatively mature stack assembly process,etc.However,the AEM water electrolyzer is still in the early development stage of the kW-level stack,which is mainly attributed to severe performance decay caused by the core component,i.e.,AEM.Here,the review comprehensively presents the recent progress of advanced AEM from the view of the performance of water electrolysis cells.Herein,fundamental principles and critical components of AEM water electrolyzers are introduced,and work conditions of AEM water electrolyzers and AEM performance improvement strategies are discussed.The challenges and perspectives are also analyzed.