Microfluidic-oriented synthesis of enriched iridium nanodots/carbon architecture for robust electrocatalytic nitrogen fixation

Electrocatalytic nitrogen reduction reaction(NRR)is considered as a promising candidate to achieve ammonia synthesis because of clean electric energy,moderate reaction condition,safe operating process and harmless by-products.However,the chemical inertness of nitrogen and poor activated capacity on catalyst surface usually produce low ammonia yield and faradic efficiency.Herein,the microfluidic technology is proposed to efficiently fabricate enriched iridium nanodots/carbon architecture.Owing to in-situ co-precipitation reaction and microfluidic manipulation,the iridium nanodots/carbon nanomaterials possess small average size,uniform dispersion,high conductivity and abundant active sites,producing good proton activation and rapid electrons transmission and moderate adsorption/desorption capacity.As a result,the as-prepared iridium nanodots/carbon nanomaterials realize large ammonia yield of 28.73 μg h^(-1) cm^(-2) and faradic efficiency of 9.14%in KOH solution.Moreover,the high ammonia yield of 11.21 μg h^(-1) cm^(-2) and faradic efficiency of 24.30%are also achieved in H_(2)SO_(4) solution.The microfluidic method provides a reference for large-scale fabrication of nano-sized catalyst materials,which may accelerate the progress of electrocatalytic NRR in industrialization field.

High-throughput microfluidic production of carbon capture microcapsules:fundamentals,applications,and perspectives

In the last three decades,carbon dioxide(CO_(2)) emissions have shown a significant increase from various sources.To address this pressing issue,the importance of reducing CO_(2) emissions has grown,leading to increased attention toward carbon capture,utilization,and storage strategies.Among these strategies,monodisperse microcapsules,produced by using droplet microfluidics,have emerged as promising tools for carbon capture,offering a potential solution to mitigate CO_(2) emissions.However,the limited yield of microcapsules due to the inherent low flow rate in droplet microfluidics remains a challenge.In this comprehensive review,the high-throughput production of carbon capture microcapsules using droplet microfluidics is focused on.Specifically,the detailed insights into microfluidic chip fabrication technologies,the microfluidic generation of emulsion droplets,along with the associated hydrodynamic considerations,and the generation of carbon capture microcapsules through droplet microfluidics are provided.This review highlights the substantial potential of droplet microfluidics as a promising technique for large-scale carbon capture microcapsule production,which could play a significant role in achieving carbon neutralization and emission reduction goals.

Simulation and fabrication of in vitro microfluidic microelectrode array chip for patterned culture and electrophysiological detection of neurons

To enable the detection and modulation of modularized neural networks in vitro,this study proposes a microfluidic microelectrode array chip for the cultivation,compartmentalization,and control of neural cells.The chip was designed based on the specific structure of neurons and the requirements for detection and modulation.Finite-element analysis of the chip’s flow field was conducted using the COMSOL Multiphysics software,and the simulation results show that the liquid within the chip can flow smoothly,ensuring stable flow fields that facilitate the uniform growth of neurons within the microfluidic channels.By employing MEMS technology in combination with nanomaterial modification techniques,the microfluidic microelectrode array chip was fabricated successfully.Primary hippocampal neurons were cultured on the chip,forming a well-defined neural network.Spontaneous electrical activity of the detected neurons was recorded,exhibiting a 23.7%increase in amplitude compared to neuronal discharges detected on an open-field microelectrode array.This study provides a platform for the precise detection and modulation of patterned neuronal growth in vitro,potentially serving as a novel tool in neuroscience research.

Femtosecond laser-induced nanoparticle implantation into flexible substrate for sensitive and reusable microfluidics SERS detection

Surface-enhanced Raman spectroscopy(SERS)microfluidic system,which enables rapid detection of chemical and biological analytes,offers an effective platform to monitor various food contaminants and disease diagnoses.The efficacy of SERS microfluidic systems is greatly dependent on the sensitivity and reusability of SERS detection substrates to ensure repeated use for prolonged periods.This study proposed a novel process of femtosecond laser nanoparticle array(NPA)implantation to achieve homogeneous forward transfer of gold NPA on a flexible polymer film and accurately integrated it within microfluidic chips for SERS detection.The implanted Au-NPA strips show a remarkable electromagnetic field enhancement with the factor of 9×108 during SERS detection of malachite green(MG)solution,achieving a detection limit lower than 10 ppt,far better than most laser-prepared SERS substrates.Furthermore,Au-NPA strips show excellent reusability after several physical and chemical cleaning,because of the robust embedment of laser-implanted NPA in flexible substrates.To demonstrate the performance of Au-NPA,a SERS microfluidic system is built to monitor the online oxidation reaction between MG/NaClO reactants,which helps infer the reaction path.The proposed method of nanoparticle implantation is more effective than the direct laser structuring technique.It provides better performance for SERS detection,robustness of detection,and substrate flexibility and has a wider range of applications for microfluidic systems without any negative impact.

Micro-nano-fabrication of green functional materials by multiphase microfluidics for environmental and energy applications

Multiphase microfluidic has emerged as a powerful platform to produce novel materials with tailor-designed functionalities,as microfluidic fabrication provides precise controls over the size,component,and structure of resultant materials.Recently,functional materials with well-defined micro-/nanostructures fabricated by microfluidics find important applications as environmental and energy materials.This review first illustrated in detail how different structures or shapes of droplet and jet templates are formed by typical configurations of microfluidic channel networks and multiphase flow systems.Subsequently,recent progresses on several representative energy and environmental applications,such as water purification,water collecting and energy storage,were overviewed.Finally,it is envisioned that integrating microfluidics and other novel materials will play increasing important role in contributing environmental remediation and energy storage in near future.

A novel integrated microfluidic chip for on-demand electrostatic droplet charging and sorting

On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation procedures.Here,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput sorting.The charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the chip.Moreover,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop state.The chip completes the selective charging process via electrostatic induction during droplet generation.On-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly enhanced.Furthermore,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging signal.This chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.

Microfluidic thermotaxic selection of highlymotile sperm and in vitro fertilization

The selection of the most motile and functionally competent sperm is an essential basis for in vitro fertilization(IVF)and normal embryonic development.Widely adopted clinical approaches for sperm sample processing intensely rely on centrifugation and wash steps that may induce mechanical damage and oxidative stress to sperm.Although a few microfluidic sperm sorting devices may avoid these adverse effects by exploiting intrinsic guidance mechanisms of sperm swimming,none of these approaches have been fully validated by clinical-grade assessment criteria.In this study,a microfluidic sperm sorting device that enables the selection of highly motile and functional sperm via their intrinsic thermotaxis is presented.Bioinspired by the temperature microenvironment in the fallopian tube during natural sperm selection,a microfluidic device with controllable temperature gradients along the sperm separation channel was designed and fabricated.This study investigated the optimal temperature conditions for human sperm selection and fully characterized thermotaxis-selected sperm with 45 human sperm samples.Results indicated that a temperature range of 35–36.5℃along the separation channel significantly improves human sperm motility rate((85.25±6.28)%vs.(60.72±1.37)%;P=0.0484),increases normal sperm morphology rate((16.42±1.43)%vs.(12.55±0.88)%;P<0.0001),and reduces DNA fragmentation((7.44±0.79)%vs.(10.36±0.72)%;P=0.0485)compared to the nonthermotaxis group.Sperm thermotaxis is species-specific,and selected mouse sperm displayed the highest motility in response to a temperature range of 36–37.5℃ along the separation channel.Furthermore,IVF experiments indicated that the selected sperm permitted an increased fertilization rate and improved embryonic development from zygote to blastocyst.This microfluidic thermotaxic selection approach will be translated into clinical practice to improve the IVF success rate for patients with oligozoospermia and asthenozoospermia.

Functional microfluidics:theory,microfabrication,and applications

Microfluidic devices are composed of microchannels with a diameter ranging from ten to a few hundred micrometers.Thus,quite a small(10-9–10-18l)amount of liquid can be manipulated by such a precise system.In the past three decades,significant progress in materials science,microfabrication,and various applications has boosted the development of promising functional microfluidic devices.In this review,the recent progress on novel microfluidic devices with various functions and applications is presented.First,the theory and numerical methods for studying the performance of microfluidic devices are briefly introduced.Then,materials and fabrication methods of functional microfluidic devices are summarized.Next,the recent significant advances in applications of microfluidic devices are highlighted,including heat sinks,clean water production,chemical reactions,sensors,biomedicine,capillaric circuits,wearable electronic devices,and microrobotics.Finally,perspectives on the challenges and future developments of functional microfluidic devices are presented.This review aims to inspire researchers from various fields engineering,materials,chemistry,mathematics,physics,and more—to collaborate and drive forward the development and applications of functional microfluidic devices,specifically for achieving carbon neutrality.

Microfluidic preparation of surfactant-free ultrafine DAAF with tunable particle size for insensitive initiator explosives

High purity and ultrafine DAAF(u-DAAF)is an emerging insensitive charge in initiators.Although there are many ways to obtain u-DAAF,developing a preparation method with stable operation,accurate control,good quality consistency,equipment miniaturization,and minimum manpower is an inevitable requirement to adapt to the current social technology development trend.Here reported is the microfluidic preparation of u-DAAF with tunable particle size by a passive swirling microreactor.Under the guidance of recrystallization growth kinetics and mixing behavior of fluids in the swirling microreactor,the key parameters(liquid flow rate,explosive concentration and crystallization temperature)were screened and optimized through screening experiments.Under the condition that no surfactant is added and only experimental parameters are controlled,the particle size of recrystallized DAAF can be adjusted from 98 nm to 785 nm,and the corresponding specific surface area is 8.45 m^(2)·g^(-1)to 1.33 m^(2)·g^(-1).In addition,the preparation method has good batch stability,high yield(90.8%-92.6%)and high purity(99.0%-99.4%),indicating a high practical application potential.Electric explosion derived flyer initiation tests demonstrate that the u-DAAF shows an initiation sensitivity much lower than that of the raw DAAF,and comparable to that of the refined DAAF by conventional spraying crystallization method.This study provides an efficient method to fabricate u-DAAF with narrow particle size distribution and high reproducibility as well as a theoretical reference for fabrication of other ultrafine explosives.

Rapid fabrication of modular 3D paper-basedmicrofluidic chips using projection-based 3D printing

Paper-based microchips have different advantages,such as better biocompatibility,simple production,and easy handling,making them promising candidates for clinical diagnosis and other fields.This study describes amethod developed to fabricate modular three-dimensional(3D)paper-based microfluidic chips based on projection-based 3D printing(PBP)technology.A series of two-dimensional(2D)paper-based microfluidic modules was designed and fabricated.After evaluating the effect of exposure time on the accuracy of the flow channel,the resolution of this channel was experimentally analyzed.Furthermore,several 3D paper-based microfluidic chips were assembled based on the 2D ones using different methods,with good channel connectivity.Scaffold-based 2D and hydrogel-based 3D cell culture systems based on 3D paper-based microfluidic chips were verified to be feasible.Furthermore,by combining extrusion 3D bioprinting technology and the proposed 3D paper-based microfluidic chips,multiorgan microfluidic chips were established by directly printing 3D hydrogel structures on 3D paperbased microfluidic chips,confirming that the prepared modular 3D paper-based microfluidic chip is potentially applicable in various biomedical applications.

Microfluidizer对膳食纤维溶液物理性质的影响

本文研究了Microfludizer这种微射流均质机处理膳食纤维溶液产生的一些物理性质(如粘度、光学性、固形物含量等)的影响,结果显示:经Microfludizer破碎后的物料体系出现粘度略有提高、吸光度升高、透射比下降、折光率变化较小、总固形物含量下降等现象。

Microfluidizer对膳食纤维微粒粒度分布的影响

采用Nicomp380粒度分析仪,对应用Microfluidics公司生产的微射流均质机处理前后的膳食纤维溶液中微粒粒度分布的影响进行分析,结果显示:破碎后的微粒体系出现再团聚现象;不同压力,不同次数等条件处理下微粒粒度分布存在显著差异。

Microfluidic methods used in exosome isolation

Exosomes are important biomarkers for clinical diagnosis.It is critical to isolate secreted exosomes from bodily fluids such as blood,saliva,breast milk,and urine for liquid biopsy applications.The field of microfluidics provides numerous benefits for biosample processing,diagnostics,and prognostics.Several microfluidics-based methods have been employed for the isolation and purification of exosomes in the last ten years.These microfluidic methods can be grouped into two categories based on passive and active isolation mechanisms.In the first group,inertial and hydrodynamic forces are employed to separate exosomes based on their size differences.In the second group,external forcefields are integrated into microfluidic platforms to actively isolate exosomes from other bioparticles.In this paper,the application of microfluidic methods in exosome isolation is discussed,and future perspectives on this field are highlighted.

Application of microfluidic chip technology in pharmaceutical analysis:A review

The development of pharmaceutical analytical methods represents one of the most significant aspects of drug development. Recent advances in microfabrication and microfluidics could provide new approaches for drug analysis, including drug screening, active testing and the study of metabolism. Microfluidic chip technologies, such as lab-on-a-chip technology, three-dimensional (3D) cell culture, organs-on-chip and droplet techniques, have all been developed rapidly. Microfluidic chips coupled with various kinds of detection techniques are suitable for the high-throughput screening, detection and mechanistic study of drugs. This review highlights the latest (2010–2018) microfluidic technology for drug analysis and discusses the potential future development in this field.

A State-of-the-Art Review of Mixing in Microfluidic Mixers

Microreaction technology is one of the most innovative and rapid developing fields in chemical engineering, synthesis and process technology. Many expectations toward enhanced product selectivity, yield and purity, improved safety, and access to new products and processes are directed to the microreaction technology. Microfluidic mixer is the most important component in microfluidic devices. Based on various principles, active and passive micromixers have been designed and investigated. This review is focused on the recent developments in microfluidic mixers. An overview of the flow phenomena and mixing characteristics in active and passive micromixers is presented, including the types of physical phenomena and their utilization in micromixers. Due to the simple fabrication technology and the easy implementation in a complex microfluidic system, T-micromixer is highlighted as an example to illustrate the effect of design and operating parameters on mixing efficiency and fuid flow inside microfluidic mixers.

Advances in isolation and detection of circulating tumor cells based on microfluidics

Circulating tumor cells(CTCs) are the cancer cells that circulate in the peripheral blood after escaping from the original or metastatic tumors. CTCs could be used as non-invasive source of clinical information in early diagnosis of cancer and evaluation of cancer development. In recent years, CTC research has become a hotspot field wherein many novel CTC detection technologies based on microfluidics have been developed. Great advances have been made that exhibit obvious technical advantages, but cannot yet satisfy the current clinical requirements. In this study, we review the main advances in isolation and detection methods of CTC based on microfluidics research over several years, propose five technical indicators for evaluating these methods, and explore the application prospects. We also discuss the concepts, issues, approaches, advantages, limitations, and challenges with an aim of stimulating a broader interest in developing microfluidics-based CTC detection technology.

Advances in tumor-endothelial cells co-culture and interaction on microfluidics

The metastasis in which the cancer cells degrade the extracellular matrix （ECM） and invade to the sur- rounding and far tissues of the body is the leading cause of mortality in cancer patients, With a lot of advancement in the field, yet the biological cause of metastasis are poorly understood, The microfluidic system provides advanced technology to reconstruct a variety of in vivo-like environment for studying the interactions between tumor ceils （TCs） and endothelial ceils （ECs）. This review gives a brief account of both two-dimensional models and three-dimensional microfluidic systems for the analysis of TCs-ECs co- culture as well as their applications to anti-cancer drug screening, Furthermore, the advanced methods for analyzing cell-to-cell interactions at single-cell level were also discussed,

3D printed microfluidic devices:a review focused on four fundamental manufacturing approaches and implications on the field of healthcare

In the last fewyears,3D printing has emerged as a promising alternative for the fabrication ofmicrofluidic devices,overcoming some of the limitations associated with conventional soft-lithography.Stereolithography(SLA),extrusion-based technology,and inkjet 3D printing are three of the widely used 3D printing technologies owing to their accessibility and affordability.Microfluidic devices can be 3D printed by employing a manufacturing approach from four fundamental manufacturing approaches classified as(1)direct printing approach,(2)mold-based approach,(3)modular approach,and(4)hybrid approach.To evaluate the feasibility of 3D printing technologies for fabricating microfluidic devices,a review focused on 3D printing fundamental manufacturing approaches has been presented.Using a broad spectrum of additive manufacturing materials,3D printed microfluidic devices have been implemented in various fields,including biological,chemical,and material synthesis.However,some crucial challenges are associated with the same,including low resolution,low optical transparency,cytotoxicity,high surface roughness,autofluorescence,non-compatibility with conventional sterilization methods,and low gas permeability.The recent research progress in materials related to additive manufacturing has aided in overcoming some of these challenges.Lastly,we outline possible implications of 3D printed microfluidics on the various fields of healthcare such as in vitro disease modeling and organ modeling,novel drug development,personalized treatment for cancer,and cancer drug screening by discussing the current state and future outlook of 3D printed‘organs-on-chips,’and 3D printed‘tumor-on-chips.’We conclude the review by highlighting future research directions in this field.

Rapid preparation of size-tunable nano-TATB by microfluidics

Nano-TATB was developed in microchannels by physical method and chemical method,respectively.The effects of total flow rate,number of microreactor plates,solvent/non-solvent ratio and temperature on the particle size of TATB in the physical method were studied.Prepared TATB were characterized by Nano Sizer,Scanning Electron Microscopy,Specific surface aperture analyzer,X-ray diffraction,Fourier transform infrared spectroscopy and Differential Scanning Calorimetry.The results show that the TATB obtained by physical method and chemical method are spherical,with average particle size of 130.66 nm and 108.51 nm,respectively.Specific surface areas of TATB obtained by physical and chemical methods are 21.37 m^(2)/g and 21.91 m^(2)/g,respectively.Compared with the specific surface area of micro-TATB(0.0808 m^(2)/g),the specific surface area of nano-TATB is significantly increased.DSC test results show that the smaller the particle size of TATB,the lower the thermal decomposition temperature.In addition,by simulating the mixing state of fluid in microchannels and combining with the classical nucleation theory,the mechanism of preparing nano-TATB by microchannels was proposed.

Progress of Microfluidics for Biology and Medicine

Microfluidics has been considered as a potential technology to miniaturize the conventional equipments and technologies. It offers advantages in terms of small volume, low cost, short reaction time and highthroughput. The applications in biology and medicine research and related areas are almost the most extensive and profound. With the appropriate scale that matches the scales of cells, microfluidics is well positioned to contribute significantly to cell biology. Cell culture, fusion and apoptosis were successfully performed in microfluidics. Microfluidics provides unique opportunities for rare circulating tumor cells isolation and detection from the blood of patients, which furthers the discovery of cancer stem cell biomarkers and expands the understanding of the biology of metastasis. Nucleic acid amplification in microfluidics has extended to single-molecule, high-throughput and integration treatment in one chip. DNA computer which is based on the computational model of DNA biochemical reaction will come into practice from concept in the future. In addition, microfluidics offers a versatile platform for protein-protein interactions, protein crystallization and high-throughput screening. Although microfluidics is still in its infancy, its great potential has already been demonstrated and will provide novel solutions to the high-throughput applications.