Composite Panels from the Combination of Rice Husk and Wood Chips with a Natural Resin Based on Tannins Reinforced with Sugar Cane Molasses Intended for Building Insulation: Physico-Mechanical and Thermal Properties

The objective of this work is to develop new biosourced insulating composites from rice husks and wood chips that can be used in the building sector. It appears from the properties of the precursors that rice chips and husks are materials which can have good thermal conductivity and therefore the combination of these precursors could make it possible to obtain panels with good insulating properties. With regard to environmental and climatic constraints, the composite panels formulated at various rates were tested and the physico-mechanical and thermal properties showed that it was essential to add a crosslinker in order to increase certain solicitation. an incorporation rate of 12% to 30% made it possible to obtain panels with low thermal conductivity, a low surface water absorption capacity and which gives the composite good thermal insulation and will find many applications in the construction and real estate sector. Finally, new solutions to improve the fire reaction of the insulation panels are tested which allows to identify suitable solutions for the developed composites. In view of the flame tests, the panels obtained are good and can effectively combat fire safety in public buildings.

Effect of nonuniform sintering on mechanical and thermal properties of silica-based ceramic cores

During sintering of the silica-based ceramic core of turbine blades,a phenomenon called"nonuniform sintering"occurs that negatively affects the thermal and mechanical properties of the core.Standard samples of silica-based core were prepared by an injection molding method and sintered with alumina backfilling powder with different sodium contents.The effect of sodium content on the nonuniform sintering of silica-based cores and the thermal and mechanical properties was evaluated.Results show that the sintering level and the content ofα-cristobalite in the surface layer are significantly higher than that of the sample interior.A considerable number of microcracks are found in the surface layer due to theβtoα-phase transition of cristobalite.As the sodium content in the alumina powder decreases,the level of the nonuniform sintering and the amount of crystallized cristobalite in the surface layer decrease,which is beneficial to the thermal expansion and flexural strength at ambient temperature.The flexural strength and thermal deformation at high temperature are improved by reducing the surface cracks,but deteriorated with the decrease of the cristobalite crystallization when the surface cracks are macroscopically invisible.

Microstructure,elastic/mechanical and thermal properties of CrTaO_(4):A new thermal barrier material?

CrTaO_(4)(or Cr_(0.5)Ta_(0.5)O_(2))has been unexpectedly found to play a decisive role in improving the oxidation resistance of Cr and Ta-containing refractory high-entropy alloys(RHEAs).This rarely encountered complex oxide can effectively prevent the outward diffusion of metal cations from the RHEAs.Moreover,the oxidation kinetics of CrTaO_(4)-forming RHEAs is comparable to that of the well-known oxidation resistant Cr_(2)O_(3)-and Al_(2)O_(3)-forming Ni-based superalloys.However,CrTaO_(4)has been ignored and its mechanical and thermal properties have yet to be studied.To fill this research gap and explore the untapped potential for its applications,here we report for the first time the microstructure,mechanical and thermal properties of CrTaO_(4)prepared by hot-press sintering of solid-state reaction synthesized powders.Using the HAADF and ABF-STEM techniques,rutile crystal structure was confirmed and short range ordering was directly observed.In addition,segregation of Ta and Cr was identified.Intriguingly,CrTaO_(4)exhibits elastic/mechanical properties similar to those of yttria stabilized zirconia(YSZ)with Young’s modulus,shear modulus,and bulk modulus of 268,107,and 181 GPa,respectively,and Vickers hardness,flexural strength,and fracture toughness of 12.2±0.44 GPa,142±14 MPa,and 1.87±0.074 MPa·m^(1/2).The analogous elastic/mechanical properties of CrTaO_(4)to those of YSZ has spurred inquiries to lucrative leverage it as a new thermal barrier material.The measured melting point of CrTaO_(4)is 2103±20 K.The anisotropic thermal expansion coefficients areα_(a)=(5.68±0.10)×10^(-6)K^(-1),α_(c)=(7.81±0.11)×10^(-6)K^(-1),with an average thermal expansion coefficient of(6.39±0.11)×10^(-6)K^(-1).The room temperature thermal conductivity of CrTaO_(4)is 1.31 W·m^(-1)·K^(-1)and declines to 0.66 W·m^(-1)·K^(-1)at 1473 K,which are lower than most of the currently well-known thermal barrier materials.From the perspective of matched thermal expansion coefficient,CrTaO_(4)pertains to an eligible thermal barrier material for refractory metals such as Ta,Nb,and RHEAs,and ultrahigh temperature ceramics.As such,this work not only provides fundamental microstructure,elastic/mechanical and thermal properties that are instructive for understanding the protectiveness displayed by CrTaO_(4)on top of RHEAs but also outreaches its untapped potential as a new thermal barrier material.

The Thermal and Mechanical Properties of Ultra-High Molecular Weight Polyethylene/Montmorillonite (UHMWPE/MMT) Nanocomposites Hybrid Gel Using Pressure-Induced Flow (PIF) Processing

Hybrid organic-inorganic polymer nanocomposites incorporating organically modified montmorillonite (MMT) and ultra-high molecular weight polyethylene (UHMWPE) were examined. UHMWPE/MMT hybrid nanocomposites were prepared using gel and pressure-induced flow(PIF) processing methods at a gel weight concentration of 8% UHMWPE with various organoclay contents (0, 0.4, 0.8, 1.2, and 1.6 parts per hundred parts). The interlayer properties of the nanocomposites were studied by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermal and mechanical interfacial properties of the nanocomposites were investigated through thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and the use of a universal test machine (UTM). TEM indicates that the nanocomposites are formed upon dispersion of MMT in the polymer matrix. From the DSC, TGA, and DMA results, we find that the thermal stability of the UHMWPE nanocomposites increases as the MMT content increases. The nanocomposites show higher tensile strengths than pure UHMWPE gel sheet. These findings indicate that the interfacial and mechanical properties are improved by the addition of MMT and PIF processing.

Hyperbranched Acrylated Aromatic Polyester Used as a Modifier in UV-Curable Epoxy Acrylate Resins

The viscosity, the shrinkage degree and the photopolymerization rate of the epoxy acrylate (EB600) blended with hyperbranched acrylated aromatic polyester (HAAPE) were investigated. The addition of HAAPE into EB600 largely reduces the viscosity of the blend formulation and the shrinkage degree. For example, EB600 resin with 50% weight fraction of HAAPE has the 1250 cps of the viscosity and 2.0% of shrinkage degree, while the pure EB600 resin has 3000 cps of the viscosity and 10.5% of shrinkage degree. The photopolymerization rate of the resin is also promoted by HAAPE addition. The good miscibility between HAAPE and EB600 was also observed from the dynamic mechanical analysis. The tensile, flexural and compressive strength, and the thermal properties of the UV cured films are greatly improved.

Epoxy Resins Modified with Vegetable Oils

1 Results The application of modified natural oils, nontoxic, biodegradable and renewable materials, for the modification and the synthesis of epoxy resins were presented. Firstly, the application of epoxidized vegetable oils (soybean, rapeseed, linseed and sunflower):as reactive diluents for epoxy resins was proposed and studied[1-2]. Viscosity reducing ability of epoxidized oils was tested in the compositions with Bisphenol A based low-molecular-weight epoxy resins. The rheological behaviour of the mi...