Parameter optimization for Rayleigh-Mie lidar under different dust conditions for the landing area of Martian Tianwen-1

Mars is the terrestrial planet in the solar system that is closest to the Earth.Studying the atmospheric parameters of Mars and studying the evolutionary history of the Martian environment on this basis is helpful for people to discover signs of extraterrestrial life and to study the trend of climate change on Earth.Mie–Rayleigh scattering lidar is an important technology for detecting parameters from the surface to the middle and upper atmosphere.Because of the different aerosol distributions,Mie scattering and Rayleigh scattering have their own optimal detection ranges.Given the long period and high cost of any deep space exploration program,it is important to conduct sufficient feasibility studies and parameter simulations before the payload is launched.In this study,a parameterized lidar mathematical model and Earth’s atmospheric mode are used to compare with the measured signals of ground-based Mie–Rayleigh scattering lidar,and the correctness of the lidar mathematical model is verified.Using the model,we select the landing area of Tianwen-1 and substitute it into the Martian atmospheric mode,and then the Mie–Rayleigh lidar backscattering signal and the key parameters of the lidar system are systematically analyzed under the conditions of a clean Martian atmosphere and a global sandstorm.In addition,the optimal detection altitude ranges of Mie scattering and Rayleigh scattering on Mars under different atmospheric conditions are obtained,which provides a reference for the practical design and development of the subsequent lidar system for the Martian atmospheric environment.

Theoretical Models of Light Scattering Applied in Sizing Particles in Coal Water Slurry

Advantges and disadvantage of Mie scattering model and Fraunhofer diffraction model are discussed. The result shows that 1) the Fraunhofer diffraction model is simple in design and fast in operation, which is quite suitable for on-line control and 2) the intensity and energy distribution of diffracted light of both the Mie scattering model and the Fraunhofer theoretical model are compared and researched. Feasibility of using the Fraunhofer diffraction model to replace the Mie scattering model in measuring particles in coal water slurry is demonstrated.

A SIMPLE METHOD FOR PREDICTION OF THE REDUCED SCATTERING COEFFICIENT IN TISSUE-SIMULATING PHANTOMS

This paper proposes a method for predicting the reduced scattering coefficients of tissuesimulating phantoms or the desired amount of scatters for producing phantoms according to Mie scattering theory without measurements with other instruments.The concentration of the scatters TiO2 particles is determined according to Mie theory calculation and added to transparent host epoxy resin to produce phantoms with different reduced scattering coefficients.Black India Ink is added to alter the absorption coefficients of the phantoms.The reduced scattering coefficients of phantoms are measured with single integrating sphere system.The results show that the measurements are in direct proportion to the concentration of TiO2 and have identical with Mie theory calculation at multiple wavelengths.The method proposed can accurately determine the concentration of scatters in the phantoms to ensure the phantoms are qualified with desired reduced scattering coefficients at specified wavelength.This investigation should be possible to manufacture the phantom simply in reasonably accurate for evaluation of biomedical optical imaging systems.

Static Laser Light Scattering Studies from Red Blood Cells

A homemade Static Light scattering studies has been used to determine angle resolved scattered intensity for different polarization states of the incident laser light. Classical light scattering set ups are being used to study morphological aspects of scatterers using simple set ups using low power lasers. Red blood cells form rather interesting as well as a challenging system for scattering experiments. The scattering spectrometer consists of a scattering arm, a scattering turn table and collimating arm. Along with polarizers integrated in the collimating arm as well as scattering arms ensures collection of scattered flux with the required polarization state. This technique is being developed for its in vitro studies using fresh red blood cells. A brief review of the theoretical models used for scattering from Red Blood Cells (RBC) has been discussed in the paper. Scattering pattern (scattering plots) as well as polar plots of scattered flux have been determined for different polarization state of the incident light. Insight into the orientation of major axis of particles can be inferred from the polar plots.

Chiral exceptional point and coherent suppression of backscattering in silicon microring with low loss Mie scatterer

Non-Hermitian systems with their spectral degeneracies known as exceptional points(EPs)have been explored for lasing,controlling light transport,and enhancing a sensor’s response.A ring resonator can be brought to an EP by controlling the coupling between its frequency degenerate clockwise and counterclockwise traveling modes.This has been typically achieved by introducing two or more nanotips into the resonator’s mode volume.While this method provides a route to study EP physics,the basic understanding of how the nanotips’shape and size symmetry impact the system’s non-Hermicity is missing,along with additional loss from both in-plane and out-of-plane scattering.The limited resonance stability poses a challenge for leveraging EP effects for switches or modulators,which requires stable cavity resonance and fixed laser-cavity detuning.Here we use lithographically defined asymmetric and symmetric Mie scatterers,which enable subwavelength control of wave transmission and reflections without deflecting to additional radiation channels.We show that those pre-defined Mie scatterers can bring the system to an EP without post tuning,as well as enable chiral light transport within the resonator.Counterintuitively,the Mie scatterer results in enhanced quality factor measured on the transmission port,through coherently suppressing the backscattering from the waveguide surface roughness.The proposed device platform enables pre-defined chiral light propagation and backscattering-free resonances,needed for various applications such as frequency combs,solitons,sensing,and other nonlinear optical processes such as photon blockade,and regenerative oscillators.

Comparison of the mechanism of gap formation for tri- and bi-component phononic crystal

Using an exact Mie scattering solution, this paper investigates the mode conversions during the Mie scattering of a single bi- or one-component sphere in unbounded epoxy. Then the formation mechanism of the first complete gap in the corresponding tri- or bi-component phononic crystal is investigated by the multiple-scattering method. It is shown that the heavy density of the scatterer plays an essential role in the Mie resonance and the formation of the gaps for both types of the phononic crystals. For the tri-component phononic crystal, the gap is mainly induced by the Mie resonance of the single scatterer. For the bi-component phononic crystal, the transverse wave （by mode-conversion during the Mie scattering under a longitudinal wave incidence） is modulated by the periodicity and governed by the Bloch theory, which induces the gap cooperatively.

Inversion of particle size distribution from light-scattering data using a modified regularization algorithm

A modified regularization algorithm with a more proper operator was proposed for the inversion of particle size distribution （PSD） from light-scattering data in a laser particle sizer based on the Mie scattering principle. The Generalized Cross-Validation （GCV） method and the L-curve method were used for deter- mining the regularization parameter. The Successive Over-Relaxation （SOR） iterative method was used to increase the exactness and stability of the converged result. The simulated results based on the modified algorithm are in a good agreement with the experimental data measured for nine standard particulate samples, their mixtures as well as three natural particulate materials with irregular shapes, indicating that this modified regularization method is not only feasible but also effective for the simulation of PSD from corresponding light-scattering data.

Characteristic control of long period fiber grating （LPFG） fabricated by infrared femtosecond laser

Long period fiber gratings （LPFGs） with different spectral characteristics were fabricated with 1 kHz, 50 fs laser pulses. The contrast of resonant rejection band can be significantly increased by a proper amount of axial stress along a fiber during laser writing or post- processing with lower energy density laser irradiation. Variations of focal condition, pulse energy of laser irradiation and the number of grating periods lead to the generation of resonance rejection band of LPFGs from single-peak to multi-peak plus larger out-of-band loss. The out-of-band loss is primarily caused by Mie scattering from the laser processed cites, and it can be reduced by decreasing the duty cycle of grating pitch instead of lowing down the actual power of laser irradiation.

Denoising and fuel spray droplet detection from light-scattered images using deep learning

A deep learning-based method for denoising and detecting the gas turbine engine spray droplets in the lightscattered image(Mie scattering)is proposed for the first time.A modified U-Net architecture is employed in the proposed method to denoise and regenerate the droplets.We have compared and validated the performance of the modified U-Net architecture with standard conventional neural networks(CNN)and modified ResNet architectures for denoising spray images from the Mie scattering experiment.The modified U-Net architecture performed better than the other two networks with significantly lower Mean Squared Error(MSE)on the validation dataset.The modified U-Net architecture also produced images with the highest Power Signal to Noise Ratio(PSNR)compared to the other two networks.This superior performance of the modified U-Net architecture is attributed to the encoder-decoder structure.During downsampling,as part of the encoder,only the most prominent features of the image are selectively retained by excluding any noise.This reconstruction of the noisefree features has produced a more accurate and better denoised image.The denoised images are then passed through a center predictor CNN to determine the location of the droplets with an average error of 1.4 pixels.The trained deep learning method for denoising and droplet center detection takes about 2.13 s on a single graphics processing unit(GPU).This study shows the promise for real-time processing of the experimental data using the well-optimized network.

Lidar Methods for Observing Mineral Dust

Lidar methods for observing mineral dust aerosols are reviewed.These methods include Mie scattering lidars,polarization lidars,Raman scattering lidars,high-spectral-resolution lidars,and fluorescence lidars.Some of the lidar systems developed by the authors and the results of the observations and applications are introduced.The largest advantage of the lidar methods is that they can observe vertical distribution of aerosols continuously with high temporal and spatial resolutions.Networks of ground-based lidars provide useful data for understanding the distribution and movement of mineral dust and other aerosols.The lidar network data are actually used for validation and assimilation of dust transport models,which can evaluate emission,transport,and deposition of mineral dust.The lidar methods are also useful for measuring the optical characteristics of aerosols that are essential to assess the radiative effects of aerosols.Evolution of the lidar data analysis methods for aerosol characterization is also reviewed.Observations from space and ground-based networks are two important approaches with the lidar methods in the studies of the effects of mineral dust and other aerosols on climate and the environment.Directions of the researches with lidar methods in the near future are discussed.

Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect

An experimental study on the Klystron effect of periodic injection modulated by pressure drop fluctuations on subsequent atomization is conducted. Time-resolved atomization backlit images and atomization Mie scatter images are captured by using the high speed camera. It is found that periodicity of forced atomization relies on pressure drop fluctuation amplitude and phase differences between atomization and pressure drop fluctuations relate to fluctuation frequencies. This feature of periodic atomization induced by Klystron effect corresponds to periodicities and high amplitudes of pressure fluctuations in unstable combustion chambers and chaos and low amplitudes of pressure fluctuations in stable combustions chambers. Drastically periodic varying of gross surface area of droplets with time was shown in Mie scatter images. The importance of periodic impinging jet atomization modulated by pressure drop fluctuations for acoustic liquid propellant combustion instabilities is illustrated.