The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is...The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.展开更多
According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute...According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute of Uranium Geology （BRIUG）. A heater, which simulates a container of radioactive waste, is placed inside the compacted Gaomiaozi （GMZ）-Na-bentonite blocks and pellets. Water inflow through the barrier from its outer surface is used to simulate the intake of groundwater. The numbers of water injection pipes, injection pressure and the insulation layer were determined based on the nu- merical modeling simulations. The current experimental data of the facility are herein analyzed. The experiment is intended to evaluate the thermo-hydro-mechano-chemical （THMC） processes occurring in the compacted bentonite-buffer during the early stage of HLW disposal and to provide a reliable database for numerical modeling and further investigation of engineered barrier system （EBS）, and the design of HLW repository.展开更多
After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design pl...After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design platform system for main DMU model is developed. Based on the architecture,a method of skeleton design has been applied to the development of digital design system.展开更多
Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material se...Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material serves to transfer heat excellently. Divertor mock-ups with W/Cu graded interlayers were designed to reduce thermal stresses. Thermally induced stresses and temperature in a W/Cu divertor mock-up were analyzed using the finite element method. The graded structures with different exponents p and thick- nesses were designed and discussed. The conclusions drawn from these analyses are that thermal stresses reach the minimum and the temperature is suitable when exponent p is 1.5 and the thickness of five graded interlayers is 5 mm.展开更多
China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is ...China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is the key engineering technology of ITER construction and might be one of the crucial issues of the future reactor too. Since 2004, an associated research team including Southwestern Institute of Physics （ SWIP ）, Ninxia Non-ferrous Metal Co. Itd and Chinese Institute of Engineering Physics, as well as Nuclear Power Institute of China has been established. Up to now, several series of interlayer for hot isostatic press （ HIP ） connection of beryllium and CuCrZr alloy have been tested. They are titanium film or coating, Cu coating and Al or AISiMg alloy etc. The bonding strength （tensile or shear strength ） of HIPed Be/Cu joints is up to 100 MPa.展开更多
针对非合作目标抓捕、在轨维护、空间装配等复杂空间操作任务的地面验证需求,构建一套分布式仿真系统,主要由后台仿真模型、前端视景演示系统和前端主控制器组成。为实现不同建模工具或编程语言之间的多学科模型耦合与交互,引入FMI(func...针对非合作目标抓捕、在轨维护、空间装配等复杂空间操作任务的地面验证需求,构建一套分布式仿真系统,主要由后台仿真模型、前端视景演示系统和前端主控制器组成。为实现不同建模工具或编程语言之间的多学科模型耦合与交互,引入FMI(functional mock-up interface)标准进行系统集成,提高了系统的模块化程度、通用性与可移植性。为充分利用计算资源、提高仿真效率,分布式部署仿真子系统与模块,利用DDS(data distribution service)通信机制实现高效、可靠的数据交互。双臂空间机器人抓捕非合作目标的演示案例表明,该仿真系统能够高保真模拟从远距离导引到近距离操作的全过程,满足实时仿真的要求。展开更多
In high-level nuclear waste(HLW)repositories,concrete and compacted bentonite are designed to be employed as buffer materials,which may raise a problem of interactions between concrete and bentonite.These interactions...In high-level nuclear waste(HLW)repositories,concrete and compacted bentonite are designed to be employed as buffer materials,which may raise a problem of interactions between concrete and bentonite.These interactions would lead to mineralogy transformation and buffer performance decay of bentonite under the near field environment conditions in a repository.A small-scale experimental setup was established to simulate the concrete-bentonite-site water interaction system from a potential nuclear waste repository in China.Three types of mortars were prepared to correspond to the concrete at different degradation states.The results permit the determination of the following:(1)The macroproperties of Gaomiaozi(GMZ)bentonite(e.g.swelling pressure,permeability,the final dry density,and water content of reacted samples);(2)The composition evolution of fluids from the synthetic site water-concrete-bentonite interaction systems;(3)The sample characterization including Fourier transform infrared spectroscopy(FTIR)and X-ray powder diffraction(XRD).Under the infiltration of the synthesis Beishan site water(BSW),the swelling pressure of bentonite decreases slowly with time after reaching its second swelling peak.The flux decreases with time during the infiltrations,and it tends to be stable after more than 120 d.Due to the cation exchange reactions in the BSW-concrete-bentonite systems,the divalent cations(Ca and Mg)were consumed,and the monovalent cations(Na and K)were released.The dissolution of minerals in the bentonite such as albite causes Si increasing in the pore water.It was concluded that the hydro-mechanical property degradation of bentonite takes place when it comes into contact with concrete mortar,even under low-pH groundwater conditions.The soil dispersion,the uneven water content,and the uneven dry density in bentonite samples may partly contribute to the swelling decay of bentonite.Therefore,the direct contact with concrete has an obvious effect on the performance of bentonite.展开更多
针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方...针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方程和仿真算法的描述,并在多领域物理系统建模仿真平台MWorks中设计了FMI接口,实现了MWorks模型的重用,扩展了MWorks模型的使用范围。目前,MWorks是国内唯一支持该规范的建模仿真工具。展开更多
文摘The China-mock-up test is to evaluate the performance of the compacted Gaomiaozi （GMZ） bentonite under coupled thermo-hydro-mechanical （THM） conditions in deep geological disposal. A numerical study of the test is conducted in this paper. The principal THM characteristics of the bentonite are presented at first. A THM model is then presented to tackle the complex coupling behavior of the bentonite. The model of Alonso-Gens is incorporated to reproduce the mechanical behavior of the bentonite under unsaturated conditions. With the proposed model, numerical simulations of the China-mock-up test are carried out by using the code of LAGAMINE. The time variations associated with the temperature, degree of saturation, suction and swelling pressure of the compacted bentonite are studied. The results suggest that the proposed model is able to reproduce the mechanical behavior of the bentonite, and to predict moisture motion under coupled THM conditions.
文摘According to the preliminary concept of the high-level radioactive waste （HLW） repository in China, a large-scale mock-up facility, named China-Mock-Up was constructed in the laboratory of Beijing Research Institute of Uranium Geology （BRIUG）. A heater, which simulates a container of radioactive waste, is placed inside the compacted Gaomiaozi （GMZ）-Na-bentonite blocks and pellets. Water inflow through the barrier from its outer surface is used to simulate the intake of groundwater. The numbers of water injection pipes, injection pressure and the insulation layer were determined based on the nu- merical modeling simulations. The current experimental data of the facility are herein analyzed. The experiment is intended to evaluate the thermo-hydro-mechano-chemical （THMC） processes occurring in the compacted bentonite-buffer during the early stage of HLW disposal and to provide a reliable database for numerical modeling and further investigation of engineered barrier system （EBS）, and the design of HLW repository.
文摘After introducing the present status of digital mock-up (DMU) technology in product development and research,the modeling and its key technologies in product design are described. The architecture of digital design platform system for main DMU model is developed. Based on the architecture,a method of skeleton design has been applied to the development of digital design system.
基金This work was financially supported by the National High-Tech Research and Development Program of China ("863" Program)(No.2003AA305340)
文摘Tungsten is a promising candidate for plasma-facing materials to cover the surface of the divertor plate in the design of an international thermonuclear experimental reactor （ITER）. Copper as a heat sink material serves to transfer heat excellently. Divertor mock-ups with W/Cu graded interlayers were designed to reduce thermal stresses. Thermally induced stresses and temperature in a W/Cu divertor mock-up were analyzed using the finite element method. The graded structures with different exponents p and thick- nesses were designed and discussed. The conclusions drawn from these analyses are that thermal stresses reach the minimum and the temperature is suitable when exponent p is 1.5 and the thickness of five graded interlayers is 5 mm.
文摘China, as one of the members of ITER （international thermonuclear experimental reactor） project, one of the most important construction tasks is the fabrication of the first wall panel and shield blankets, which is the key engineering technology of ITER construction and might be one of the crucial issues of the future reactor too. Since 2004, an associated research team including Southwestern Institute of Physics （ SWIP ）, Ninxia Non-ferrous Metal Co. Itd and Chinese Institute of Engineering Physics, as well as Nuclear Power Institute of China has been established. Up to now, several series of interlayer for hot isostatic press （ HIP ） connection of beryllium and CuCrZr alloy have been tested. They are titanium film or coating, Cu coating and Al or AISiMg alloy etc. The bonding strength （tensile or shear strength ） of HIPed Be/Cu joints is up to 100 MPa.
文摘针对非合作目标抓捕、在轨维护、空间装配等复杂空间操作任务的地面验证需求,构建一套分布式仿真系统,主要由后台仿真模型、前端视景演示系统和前端主控制器组成。为实现不同建模工具或编程语言之间的多学科模型耦合与交互,引入FMI(functional mock-up interface)标准进行系统集成,提高了系统的模块化程度、通用性与可移植性。为充分利用计算资源、提高仿真效率,分布式部署仿真子系统与模块,利用DDS(data distribution service)通信机制实现高效、可靠的数据交互。双臂空间机器人抓捕非合作目标的演示案例表明,该仿真系统能够高保真模拟从远距离导引到近距离操作的全过程,满足实时仿真的要求。
基金supported by the National Natural Science Foundation of China(Grant No.42125701)the Innovation Program of Shanghai Municipal Education Commission(Grant No.2023ZKZD26)+2 种基金Fund of the Shanghai Science and Technology Commission(Grant No.22DZ2201200)Top Discipline Plan of Shanghai Universities-Class I and the Fundamental Research Funds for the Central UniversitiesFinancial support from the International Post-Doc Fund of The Hong Kong Polytechnic University is greatly appreciated.
文摘In high-level nuclear waste(HLW)repositories,concrete and compacted bentonite are designed to be employed as buffer materials,which may raise a problem of interactions between concrete and bentonite.These interactions would lead to mineralogy transformation and buffer performance decay of bentonite under the near field environment conditions in a repository.A small-scale experimental setup was established to simulate the concrete-bentonite-site water interaction system from a potential nuclear waste repository in China.Three types of mortars were prepared to correspond to the concrete at different degradation states.The results permit the determination of the following:(1)The macroproperties of Gaomiaozi(GMZ)bentonite(e.g.swelling pressure,permeability,the final dry density,and water content of reacted samples);(2)The composition evolution of fluids from the synthetic site water-concrete-bentonite interaction systems;(3)The sample characterization including Fourier transform infrared spectroscopy(FTIR)and X-ray powder diffraction(XRD).Under the infiltration of the synthesis Beishan site water(BSW),the swelling pressure of bentonite decreases slowly with time after reaching its second swelling peak.The flux decreases with time during the infiltrations,and it tends to be stable after more than 120 d.Due to the cation exchange reactions in the BSW-concrete-bentonite systems,the divalent cations(Ca and Mg)were consumed,and the monovalent cations(Na and K)were released.The dissolution of minerals in the bentonite such as albite causes Si increasing in the pore water.It was concluded that the hydro-mechanical property degradation of bentonite takes place when it comes into contact with concrete mortar,even under low-pH groundwater conditions.The soil dispersion,the uneven water content,and the uneven dry density in bentonite samples may partly contribute to the swelling decay of bentonite.Therefore,the direct contact with concrete has an obvious effect on the performance of bentonite.
文摘针对不同领域仿真工具模型的重用互换需求,欧洲仿真界提出了功能样机可交换接口规范Functional Mock-up Interface for Model Exchange(FMI)。基于FMI接口规范,详细分析了功能样机可交换模型的结构与功能,研究了规范对仿真模型变量、方程和仿真算法的描述,并在多领域物理系统建模仿真平台MWorks中设计了FMI接口,实现了MWorks模型的重用,扩展了MWorks模型的使用范围。目前,MWorks是国内唯一支持该规范的建模仿真工具。
