In the time-difference-of-arrival(TDOA)localization,robust least squares(LS)problems solved by mathematical programming were proven to be superior in mitigating the effects of non-line-of-sight(NLOS)propagation.Howeve...In the time-difference-of-arrival(TDOA)localization,robust least squares(LS)problems solved by mathematical programming were proven to be superior in mitigating the effects of non-line-of-sight(NLOS)propagation.However,the existing algorithms still suffer from two disadvantages:1)The algorithms strongly depend on prior information;2)The approaches do not satisfy the mean square error(MSE)optimal criterion of the measurement noise.To tackle the troubles,we first formulate an MSE minimization model for measurement noise by taking the source and the NLOS biases as variables.To obtain stable solutions,we introduce a penalty function to avoid abnormal estimates.We further tackle the nonconvex locating problem with semidefinite relaxation techniques.Finally,we incorporate mixed constraints and variable information to improve the estimation accuracy.Simulations and experiments show that the proposed method achieves consistent performance and good accuracy in dynamic NLOS environments.展开更多
Cell-free massive multiple-input multipleoutput(MIMO)is a promising technology for future wireless communications,where a large number of distributed access points(APs)simultaneously serve all users over the same time...Cell-free massive multiple-input multipleoutput(MIMO)is a promising technology for future wireless communications,where a large number of distributed access points(APs)simultaneously serve all users over the same time-frequency resources.Since users and APs may locate close to each other,the line-of-sight(Lo S)transmission occurs more frequently in cell-free massive MIMO systems.Hence,in this paper,we investigate the cell-free massive MIMO system with Lo S and non-line-of-sight(NLo S)transmissions,where APs and users are both distributed according to Poisson point process.Using tools from stochastic geometry,we derive a tight lower bound for the user downlink achievable rate and we further obtain the energy efficiency(EE)by considering the power consumption on downlink payload transmissions and circuitry dissipation.Based on the analysis,the optimal AP density and AP antenna number that maximize the EE are obtained.It is found that compared with the previous work that only considers NLo S transmissions,the actual optimal AP density should be much smaller,and the maximized EE is actually much higher.展开更多
Addressing the challenges of passive Radio Frequency Identification(RFID)indoor localization technology in Non-Line-of-Sight(NLoS)and multipath environments,this paper presents an innovative approach by introducing a ...Addressing the challenges of passive Radio Frequency Identification(RFID)indoor localization technology in Non-Line-of-Sight(NLoS)and multipath environments,this paper presents an innovative approach by introducing a combined technology integrating an improved Kalman Filter with Space Domain Phase Difference of Arrival(SD-PDOA)and Received Signal Strength Indicator(RSSI).This methodology utilizes the distinct channel characteristics in multipath and NLoS contexts to effectively filter out interference and accurately extract localization information,thereby facilitating high precision and stability in passive RFID localization.The efficacy of this approach is demonstrated through detailed simulations and empirical tests conducted on a custom-built experimental platform consisting of passive RFID tags and an R420 reader.The findings are significant:in NLoS conditions,the four-antenna localization system achieved a notable localization accuracy of 0.25 m at a distance of 5 m.In complex multipath environments,this system achieved a localization accuracy of approximately 0.5 m at a distance of 5 m.When compared to conventional passive localization methods,our proposed solution exhibits a substantial improvement in indoor localization accuracy under NLoS and multipath conditions.This research provides a robust and effective technical solution for high-precision passive indoor localization in the Internet of Things(IoT)system,marking a significant advancement in the field.展开更多
60 GHz millimeter wave(mmWave)system provides extremely high time resolution and multipath components(MPC)separation and has great potential to achieve high precision in the indoor positioning.However,the ranging data...60 GHz millimeter wave(mmWave)system provides extremely high time resolution and multipath components(MPC)separation and has great potential to achieve high precision in the indoor positioning.However,the ranging data is often contaminated by non-line-of-sight(NLOS)transmission.First,six features of 60GHz mm Wave signal under LOS and NLOS conditions are evaluated.Next,a classifier constructed by random forest(RF)algorithm is used to identify line-of-sight(LOS)or NLOS channel.The identification mechanism has excellent generalization performance and the classification accuracy is over 97%.Finally,based on the identification results,a residual weighted least squares positioning method is proposed.All ranging information including that under NLOS channels is fully utilized,positioning failure caused by insufficient LOS links can be avoided.Compared with the conventional least squares approach,the positioning error of the proposed algorithm is reduced by 49%.展开更多
针对超宽带(ultra wide band,UWB)定位中影响定位精度的非视距(non line of sight,NLoS)传播误差问题,提出了一种基于Kalman滤波的NLoS误差二次消除方法.该方法利用NLoS误差与测量误差之间的相互独立性,借助Kalman滤波将NLoS误差从总误...针对超宽带(ultra wide band,UWB)定位中影响定位精度的非视距(non line of sight,NLoS)传播误差问题,提出了一种基于Kalman滤波的NLoS误差二次消除方法.该方法利用NLoS误差与测量误差之间的相互独立性,借助Kalman滤波将NLoS误差从总误差中单独分离出来,对其进行实时估计,并将该NLoS误差估计值作为NLoS误差辨别及测距值修正的依据.通过Kalman滤波对到达时间(time of arrival,TOA)测距值进行二次估计、鉴别及修正以提高TOA测距精度,从而实现室内复杂环境下的UWB精准实时定位.仿真实验结果表明:该方法不仅能够对NLoS误差实现良好的跟踪估计,对视距(line of sight,LoS)/NLoS环境转变也具有较强的灵敏感知能力,同时NLoS误差测距值在应用该方法后的定位性能逼近于LoS环境下的理想状态.展开更多
超宽带(Ultra Wide Band, UWB)技术是一种新兴的无线载波通信技术,其具有发射信号功率谱密度低、系统复杂度低、定位精度高等优势,尤其适用于像电厂等密集多径场所的高速无线连接,但在传输过程中信号会被环境中的各种因素影响,进而会影...超宽带(Ultra Wide Band, UWB)技术是一种新兴的无线载波通信技术,其具有发射信号功率谱密度低、系统复杂度低、定位精度高等优势,尤其适用于像电厂等密集多径场所的高速无线连接,但在传输过程中信号会被环境中的各种因素影响,进而会影响室内定位的精度。基于此,针对室内非视距(Non Line of Sight, NLOS)环境下,提出一种非视距混合滤波加权算法,能够有效对测距数据进行平滑处理,进而降低异常值的影响,再利用时间差定位法(Time Difference of Arrival,TDOA)测量方法,在原始Chan算法的基础上提出一种改进的Chan定位算法,解决NLOS误差引起的定位信息不准确的问题,最终实现更精准的TDOA定位。仿真实验证明,所提算法在室内NLOS环境中具有更高的定位精度。展开更多
基金supported by the National Natural Science Foundation of China under Grant No.62101370。
文摘In the time-difference-of-arrival(TDOA)localization,robust least squares(LS)problems solved by mathematical programming were proven to be superior in mitigating the effects of non-line-of-sight(NLOS)propagation.However,the existing algorithms still suffer from two disadvantages:1)The algorithms strongly depend on prior information;2)The approaches do not satisfy the mean square error(MSE)optimal criterion of the measurement noise.To tackle the troubles,we first formulate an MSE minimization model for measurement noise by taking the source and the NLOS biases as variables.To obtain stable solutions,we introduce a penalty function to avoid abnormal estimates.We further tackle the nonconvex locating problem with semidefinite relaxation techniques.Finally,we incorporate mixed constraints and variable information to improve the estimation accuracy.Simulations and experiments show that the proposed method achieves consistent performance and good accuracy in dynamic NLOS environments.
基金supported in part by the National Natural Science Foundation of China under Grant 62171231in part by the Jiangsu Provincial Key Research and Development Program(No.BE2020084-1)。
文摘Cell-free massive multiple-input multipleoutput(MIMO)is a promising technology for future wireless communications,where a large number of distributed access points(APs)simultaneously serve all users over the same time-frequency resources.Since users and APs may locate close to each other,the line-of-sight(Lo S)transmission occurs more frequently in cell-free massive MIMO systems.Hence,in this paper,we investigate the cell-free massive MIMO system with Lo S and non-line-of-sight(NLo S)transmissions,where APs and users are both distributed according to Poisson point process.Using tools from stochastic geometry,we derive a tight lower bound for the user downlink achievable rate and we further obtain the energy efficiency(EE)by considering the power consumption on downlink payload transmissions and circuitry dissipation.Based on the analysis,the optimal AP density and AP antenna number that maximize the EE are obtained.It is found that compared with the previous work that only considers NLo S transmissions,the actual optimal AP density should be much smaller,and the maximized EE is actually much higher.
基金supported in part by the Joint Project of National Natural Science Foundation of China(U22B2004,62371106)in part by China Mobile Research Institute&X-NET(Project Number:2022H002)+6 种基金in part by the Pre-Research Project(31513070501)in part by National Key R&D Program(2018AAA0103203)in part by Guangdong Provincial Research and Development Plan in Key Areas(2019B010141001)in part by Sichuan Provincial Science and Technology Planning Program of China(2022YFG0230,2023YFG0040)in part by the Fundamental Enhancement Program Technology Area Fund(2021-JCJQ-JJ-0667)in part by the Joint Fund of ZF and Ministry of Education(8091B022126)in part by Innovation Ability Construction Project for Sichuan Provincial Engineering Research Center of Communication Technology for Intelligent IoT(2303-510109-04-03-318020).
文摘Addressing the challenges of passive Radio Frequency Identification(RFID)indoor localization technology in Non-Line-of-Sight(NLoS)and multipath environments,this paper presents an innovative approach by introducing a combined technology integrating an improved Kalman Filter with Space Domain Phase Difference of Arrival(SD-PDOA)and Received Signal Strength Indicator(RSSI).This methodology utilizes the distinct channel characteristics in multipath and NLoS contexts to effectively filter out interference and accurately extract localization information,thereby facilitating high precision and stability in passive RFID localization.The efficacy of this approach is demonstrated through detailed simulations and empirical tests conducted on a custom-built experimental platform consisting of passive RFID tags and an R420 reader.The findings are significant:in NLoS conditions,the four-antenna localization system achieved a notable localization accuracy of 0.25 m at a distance of 5 m.In complex multipath environments,this system achieved a localization accuracy of approximately 0.5 m at a distance of 5 m.When compared to conventional passive localization methods,our proposed solution exhibits a substantial improvement in indoor localization accuracy under NLoS and multipath conditions.This research provides a robust and effective technical solution for high-precision passive indoor localization in the Internet of Things(IoT)system,marking a significant advancement in the field.
基金supported by National Natural Science Foundation of China(No.62101298)Collaborative Education Project between Industry and Academia,China(22050609312501)。
文摘60 GHz millimeter wave(mmWave)system provides extremely high time resolution and multipath components(MPC)separation and has great potential to achieve high precision in the indoor positioning.However,the ranging data is often contaminated by non-line-of-sight(NLOS)transmission.First,six features of 60GHz mm Wave signal under LOS and NLOS conditions are evaluated.Next,a classifier constructed by random forest(RF)algorithm is used to identify line-of-sight(LOS)or NLOS channel.The identification mechanism has excellent generalization performance and the classification accuracy is over 97%.Finally,based on the identification results,a residual weighted least squares positioning method is proposed.All ranging information including that under NLOS channels is fully utilized,positioning failure caused by insufficient LOS links can be avoided.Compared with the conventional least squares approach,the positioning error of the proposed algorithm is reduced by 49%.
文摘针对超宽带(ultra wide band,UWB)定位中影响定位精度的非视距(non line of sight,NLoS)传播误差问题,提出了一种基于Kalman滤波的NLoS误差二次消除方法.该方法利用NLoS误差与测量误差之间的相互独立性,借助Kalman滤波将NLoS误差从总误差中单独分离出来,对其进行实时估计,并将该NLoS误差估计值作为NLoS误差辨别及测距值修正的依据.通过Kalman滤波对到达时间(time of arrival,TOA)测距值进行二次估计、鉴别及修正以提高TOA测距精度,从而实现室内复杂环境下的UWB精准实时定位.仿真实验结果表明:该方法不仅能够对NLoS误差实现良好的跟踪估计,对视距(line of sight,LoS)/NLoS环境转变也具有较强的灵敏感知能力,同时NLoS误差测距值在应用该方法后的定位性能逼近于LoS环境下的理想状态.
文摘超宽带(Ultra Wide Band, UWB)技术是一种新兴的无线载波通信技术,其具有发射信号功率谱密度低、系统复杂度低、定位精度高等优势,尤其适用于像电厂等密集多径场所的高速无线连接,但在传输过程中信号会被环境中的各种因素影响,进而会影响室内定位的精度。基于此,针对室内非视距(Non Line of Sight, NLOS)环境下,提出一种非视距混合滤波加权算法,能够有效对测距数据进行平滑处理,进而降低异常值的影响,再利用时间差定位法(Time Difference of Arrival,TDOA)测量方法,在原始Chan算法的基础上提出一种改进的Chan定位算法,解决NLOS误差引起的定位信息不准确的问题,最终实现更精准的TDOA定位。仿真实验证明,所提算法在室内NLOS环境中具有更高的定位精度。
