随着5G移动视频应用加速落地以及国内视频流需求的迅速激增,迫切需要一种新的数据传输协议来提供可靠的安全性,以保障上层应用处理更多的接入连接以及满足更低的延时需求.多路径QUIC协议(Multipath Quick UDP Internet Connection,MPQU...随着5G移动视频应用加速落地以及国内视频流需求的迅速激增,迫切需要一种新的数据传输协议来提供可靠的安全性,以保障上层应用处理更多的接入连接以及满足更低的延时需求.多路径QUIC协议(Multipath Quick UDP Internet Connection,MPQUIC)具有拟合多条链路带宽资源、强大连接的容错能力和高可靠性等优点,被认为将在未来移动互联网数据传输中发挥重要的作用.然而,目前国内外研究人员对于MPQUIC协议的相关研究正处于初步阶段,该协议还没有一个普适性的、开源的仿真平台.因此,借助全球网络仿真领域应用最广的NS-3网络模拟器搭建了MPQUIC仿真平台(ns3-mpquic),为相关学者提供研究MPQUIC协议的开源、免费、普适的基础平台,为全球专家学者对MPQUIC协议的模拟部署和优化提供助力.展开更多
Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network mode...Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network model and measured data,a 3-D fracture network dynamic modeling method based on error analysis was proposed.Firstly,errors of four fracture volume density estimation methods(proposed by ODA,KULATILAKE,MAULDON,and SONG)and that of four fracture size estimation methods(proposed by EINSTEIN,SONG and TONON)were respectively compared,and the optimal methods were determined.Additionally,error index representing the deviation between fracture network model and measured data was established with integrated use of fractal dimension and relative absolute error(RAE).On this basis,the downhill simplex method was used to build the dynamic modeling method,which takes the minimum of error index as objective function and dynamically adjusts the fracture density and size parameters to correct the error index.Finally,the 3-D fracture network model could be obtained which meets the requirements.The proposed method was applied for 3-D fractures simulation in Miao Wei hydropower project in China for feasibility verification and the error index reduced from 2.618 to 0.337.展开更多
In this paper, the complete process of constructing 3D digital core by fullconvolutional neural network is described carefully. A large number of sandstone computedtomography (CT) images are used as training input for...In this paper, the complete process of constructing 3D digital core by fullconvolutional neural network is described carefully. A large number of sandstone computedtomography (CT) images are used as training input for a fully convolutional neural networkmodel. This model is used to reconstruct the three-dimensional (3D) digital core of Bereasandstone based on a small number of CT images. The Hamming distance together with theMinkowski functions for porosity, average volume specifi c surface area, average curvature,and connectivity of both the real core and the digital reconstruction are used to evaluate theaccuracy of the proposed method. The results show that the reconstruction achieved relativeerrors of 6.26%, 1.40%, 6.06%, and 4.91% for the four Minkowski functions and a Hammingdistance of 0.04479. This demonstrates that the proposed method can not only reconstructthe physical properties of real sandstone but can also restore the real characteristics of poredistribution in sandstone, is the ability to which is a new way to characterize the internalmicrostructure of rocks.展开更多
This paper takes the right branch main channel Bridge of Huai River Bridge in Huainan as the engineering background, uses the finite element software Midas and the ANSYS to simulate and analyze the jacking constructio...This paper takes the right branch main channel Bridge of Huai River Bridge in Huainan as the engineering background, uses the finite element software Midas and the ANSYS to simulate and analyze the jacking construction of the bridge, and according to the theoretical calculation, the construction monitoring plan is developed, and the stress and deformation of the key section and part of the structure are monitored. Construction monitoring combined with 3 g network and data acquisition module, monitoring data for the real time measurement, the centralized acquisition and wireless transmission, accomplish on-line real-time monitoring of the bridge construction process, effective control of jacking construction and monitoring. The comparison between theoretical analysis and measured results shows that the simulation results are reasonable, and the construction monitoring scheme based on 3G network and data collection can be used as reference.展开更多
Many theoretical derivation of the energy model requires extensive simulation in Internet of Things (IoT). Network Simulator 3 (ns-3) provides a simulation platform for various experimental studies including energy ha...Many theoretical derivation of the energy model requires extensive simulation in Internet of Things (IoT). Network Simulator 3 (ns-3) provides a simulation platform for various experimental studies including energy harvest.However, the function of charge schedule and wireless energy transfer model is not yet implemented. To address this problem, in this paper we propose an extension to ns-3 for simulating mobile charging with wireless energy transfer.First, we utilize a WET Harvest Class to harvest energy from the environment and a Charge Schedule Class for the mobile charger to choose the optimal node charging in the charging request queue in ns-3. Second, we use Charge Energy Model to judge what the mobile charger will do next when the energy of current node is higher or lower than energy threshold. Evaluation results show that our improvements are feasible and helpful with charge schedule and energy model in ns-3.展开更多
文摘随着5G移动视频应用加速落地以及国内视频流需求的迅速激增,迫切需要一种新的数据传输协议来提供可靠的安全性,以保障上层应用处理更多的接入连接以及满足更低的延时需求.多路径QUIC协议(Multipath Quick UDP Internet Connection,MPQUIC)具有拟合多条链路带宽资源、强大连接的容错能力和高可靠性等优点,被认为将在未来移动互联网数据传输中发挥重要的作用.然而,目前国内外研究人员对于MPQUIC协议的相关研究正处于初步阶段,该协议还没有一个普适性的、开源的仿真平台.因此,借助全球网络仿真领域应用最广的NS-3网络模拟器搭建了MPQUIC仿真平台(ns3-mpquic),为相关学者提供研究MPQUIC协议的开源、免费、普适的基础平台,为全球专家学者对MPQUIC协议的模拟部署和优化提供助力.
基金Project(51321065)supported by the Innovative Research Groups of the National Natural Science Foundation of ChinaProject(2013CB035904)supported by the National Basic Research Program of China(973 Program)Project(51439005)supported by the National Natural Science Foundation of China
文摘Accurate 3-D fracture network model for rock mass in dam foundation is of vital importance for stability,grouting and seepage analysis of dam foundation.With the aim of reducing deviation between fracture network model and measured data,a 3-D fracture network dynamic modeling method based on error analysis was proposed.Firstly,errors of four fracture volume density estimation methods(proposed by ODA,KULATILAKE,MAULDON,and SONG)and that of four fracture size estimation methods(proposed by EINSTEIN,SONG and TONON)were respectively compared,and the optimal methods were determined.Additionally,error index representing the deviation between fracture network model and measured data was established with integrated use of fractal dimension and relative absolute error(RAE).On this basis,the downhill simplex method was used to build the dynamic modeling method,which takes the minimum of error index as objective function and dynamically adjusts the fracture density and size parameters to correct the error index.Finally,the 3-D fracture network model could be obtained which meets the requirements.The proposed method was applied for 3-D fractures simulation in Miao Wei hydropower project in China for feasibility verification and the error index reduced from 2.618 to 0.337.
基金the National Natural Science Foundation of China(No.41274129)Chuan Qing Drilling Engineering Company's Scientific Research Project:Seismic detection technology and application of complex carbonate reservoir in Sulige Majiagou Formation and the 2018 Central Supporting Local Co-construction Fund(No.80000-18Z0140504)the Construction and Development of Universities in 2019-Joint Support for Geophysics(Double First-Class center,80000-19Z0204)。
文摘In this paper, the complete process of constructing 3D digital core by fullconvolutional neural network is described carefully. A large number of sandstone computedtomography (CT) images are used as training input for a fully convolutional neural networkmodel. This model is used to reconstruct the three-dimensional (3D) digital core of Bereasandstone based on a small number of CT images. The Hamming distance together with theMinkowski functions for porosity, average volume specifi c surface area, average curvature,and connectivity of both the real core and the digital reconstruction are used to evaluate theaccuracy of the proposed method. The results show that the reconstruction achieved relativeerrors of 6.26%, 1.40%, 6.06%, and 4.91% for the four Minkowski functions and a Hammingdistance of 0.04479. This demonstrates that the proposed method can not only reconstructthe physical properties of real sandstone but can also restore the real characteristics of poredistribution in sandstone, is the ability to which is a new way to characterize the internalmicrostructure of rocks.
文摘This paper takes the right branch main channel Bridge of Huai River Bridge in Huainan as the engineering background, uses the finite element software Midas and the ANSYS to simulate and analyze the jacking construction of the bridge, and according to the theoretical calculation, the construction monitoring plan is developed, and the stress and deformation of the key section and part of the structure are monitored. Construction monitoring combined with 3 g network and data acquisition module, monitoring data for the real time measurement, the centralized acquisition and wireless transmission, accomplish on-line real-time monitoring of the bridge construction process, effective control of jacking construction and monitoring. The comparison between theoretical analysis and measured results shows that the simulation results are reasonable, and the construction monitoring scheme based on 3G network and data collection can be used as reference.
文摘Many theoretical derivation of the energy model requires extensive simulation in Internet of Things (IoT). Network Simulator 3 (ns-3) provides a simulation platform for various experimental studies including energy harvest.However, the function of charge schedule and wireless energy transfer model is not yet implemented. To address this problem, in this paper we propose an extension to ns-3 for simulating mobile charging with wireless energy transfer.First, we utilize a WET Harvest Class to harvest energy from the environment and a Charge Schedule Class for the mobile charger to choose the optimal node charging in the charging request queue in ns-3. Second, we use Charge Energy Model to judge what the mobile charger will do next when the energy of current node is higher or lower than energy threshold. Evaluation results show that our improvements are feasible and helpful with charge schedule and energy model in ns-3.
