The interdiffusion coefficients in Al_(0.2)CoCrFeNi,CoCrCu_(0.2)FeNi,and CoCrFeMn_(0.2)Ni high-entropy alloys were efficiently determined by combining diffusion couple experiments and high-throughput determination of ...The interdiffusion coefficients in Al_(0.2)CoCrFeNi,CoCrCu_(0.2)FeNi,and CoCrFeMn_(0.2)Ni high-entropy alloys were efficiently determined by combining diffusion couple experiments and high-throughput determination of interdiffusion coefficients(HitDIC)software at 1273−1373 K.The results show that the addition of Al,Cu,and Mn to CoCrFeNi high-entropy alloys promotes the diffusion of Co,Cr,and Fe atoms.The comparison of tracer diffusion coefficients indicates that there is no sluggish diffusion in tracer diffusion on the thermodynamic temperature scale for the present Al_(0.2)CoCrFeNi,CoCrCu_(0.2)FeNi,and CoCrFeMn_(0.2)Ni high-entropy alloys.The linear relationship between diffusion entropy and activation energy reveals that the diffusion process of atoms is unaffected by an increase in the number of components as long as the crystal structure remains unchanged.展开更多
Formation and growth of the intermediate phases in the Ni-Al diffusion couples prepared by pouring technique were investigated. Electron probe microanalysis, scanning electron microscopy and X-ray diffraction were use...Formation and growth of the intermediate phases in the Ni-Al diffusion couples prepared by pouring technique were investigated. Electron probe microanalysis, scanning electron microscopy and X-ray diffraction were used to characterize the product phases in the joints. The results show that two intermediate phases form in the sequence of NiAl3 and Ni2Al3 during solidification. After annealed, Ni2Al3 and NiAl3 still exist in the joints of the couples. The reasons for the formation of Ni2Al3 and NiAl3, as well as the absence of NiAl, Ni5Al3 and Ni3Al were discussed, respectively. The growth kinetics of both product phase layers indicates that their growth obeys the parabolic rate law. The activation energies and frequency factors for NiAl3 and Ni2Al3 phases were also calculated according to the Arrhenius equation.展开更多
The mechanical and diffusion properties of bcc Ti−Nb−Zr−Sn alloys in the Ti-rich corner were analyzed through a high-throughput method with the combination of nanoindentation and diffusion couple techniques.Nine group...The mechanical and diffusion properties of bcc Ti−Nb−Zr−Sn alloys in the Ti-rich corner were analyzed through a high-throughput method with the combination of nanoindentation and diffusion couple techniques.Nine groups of quaternary Ti−Nb−Zr−Sn diffusion couples were prepared after annealing at 1273 K for 25 h.The composition-dependent mechanical properties were determined by nanoindentation and electron probe microanalysis(EPMA)techniques.Moreover,the corresponding interdiffusion coefficients were confirmed from the composition gradients of the quaternary diffusion couples using a pragmatic numerical inverse method.A composition-dependent database on the mechanical and diffusion properties was utilized to discuss the processability during the hot working.The results reveal that the solute elements Nb and Sn are strictly controlled to increase the hardness and wear resistance of Ti−Nb−Zr−Sn alloys,and the additional element Zr is mainly useful to improve the processability during the hot working.展开更多
Electron probe microanalysis and SEM were employed to study the phase equilibria and diffusion paths in C Ni 8Ta, C Ni 3Ta, C Ni 2Ta diffusion couples after annealed at 1100 ℃ for 120 h or at 1200 ℃ for 120 h ...Electron probe microanalysis and SEM were employed to study the phase equilibria and diffusion paths in C Ni 8Ta, C Ni 3Ta, C Ni 2Ta diffusion couples after annealed at 1100 ℃ for 120 h or at 1200 ℃ for 120 h and then at 1100 ℃ for 24 h. Attempt was made to use the calculated stability diagram of carbon activity to explain the experimental observations. The phases formed in the diffusion layers were all in the prediced ranges.展开更多
利用Fe Ni Al Co Ti多元扩散偶研究了界面处的α1+α2+(FeCo)2Ti三相在800℃下的相平衡,通过扩散偶界面两侧的相成分分析获知,Co在α2与α1相之间的分配比约为1 1,Ti在α2与α1相之间的分配比约为2 5.在Fe Ni Al合金中同时添加Co与Ti时...利用Fe Ni Al Co Ti多元扩散偶研究了界面处的α1+α2+(FeCo)2Ti三相在800℃下的相平衡,通过扩散偶界面两侧的相成分分析获知,Co在α2与α1相之间的分配比约为1 1,Ti在α2与α1相之间的分配比约为2 5.在Fe Ni Al合金中同时添加Co与Ti时,其在固溶体α2与α1相之间的分配特征与Fe Ni Al Co和Fe Ni Al Ti系中一样,Co与Ti在α2与α1相之间的分配比仍均大于1.展开更多
基金supported by the National Natural Science Foundation of China(No.52374372)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.23KJB430042)+3 种基金the Jiangsu Province Large Scientific Instruments Open Sharing Autonomous Research Filing Project,China(No.TC2023A037)the Yangzhou City−Yangzhou University Cooperation Foundation,China(No.YZ2022183)High-end Talent Support Program of Yangzhou University,China,Qinglan Project of Yangzhou University,ChinaLvyangjinfeng Talent program of Yangzhou,China.
文摘The interdiffusion coefficients in Al_(0.2)CoCrFeNi,CoCrCu_(0.2)FeNi,and CoCrFeMn_(0.2)Ni high-entropy alloys were efficiently determined by combining diffusion couple experiments and high-throughput determination of interdiffusion coefficients(HitDIC)software at 1273−1373 K.The results show that the addition of Al,Cu,and Mn to CoCrFeNi high-entropy alloys promotes the diffusion of Co,Cr,and Fe atoms.The comparison of tracer diffusion coefficients indicates that there is no sluggish diffusion in tracer diffusion on the thermodynamic temperature scale for the present Al_(0.2)CoCrFeNi,CoCrCu_(0.2)FeNi,and CoCrFeMn_(0.2)Ni high-entropy alloys.The linear relationship between diffusion entropy and activation energy reveals that the diffusion process of atoms is unaffected by an increase in the number of components as long as the crystal structure remains unchanged.
基金Funded by the National Natural Science Foundation of China(No.10477006)the Key Project of Chinese Ministry of Education(No.106055)
文摘Formation and growth of the intermediate phases in the Ni-Al diffusion couples prepared by pouring technique were investigated. Electron probe microanalysis, scanning electron microscopy and X-ray diffraction were used to characterize the product phases in the joints. The results show that two intermediate phases form in the sequence of NiAl3 and Ni2Al3 during solidification. After annealed, Ni2Al3 and NiAl3 still exist in the joints of the couples. The reasons for the formation of Ni2Al3 and NiAl3, as well as the absence of NiAl, Ni5Al3 and Ni3Al were discussed, respectively. The growth kinetics of both product phase layers indicates that their growth obeys the parabolic rate law. The activation energies and frequency factors for NiAl3 and Ni2Al3 phases were also calculated according to the Arrhenius equation.
基金supported by the National Natural Science Foundation for Youth of China (No. 51701083)the Guangzhou Science and Technology Association Young Talent Lifting Project, China (No. X20210201054)+2 种基金the Guangdong Provincial Natural Science Foundation for Doctoral Research Project, China (No. 2017A030310519)the Open Fund of National Joint Engineering Research Center for Abrasion Control and Molding of Metal Materials, China (No. HKDNM201903)financial support from the Guangdong Basic and Applied Basic Research Foundation, China (No. 2019A1515110095)。
文摘The mechanical and diffusion properties of bcc Ti−Nb−Zr−Sn alloys in the Ti-rich corner were analyzed through a high-throughput method with the combination of nanoindentation and diffusion couple techniques.Nine groups of quaternary Ti−Nb−Zr−Sn diffusion couples were prepared after annealing at 1273 K for 25 h.The composition-dependent mechanical properties were determined by nanoindentation and electron probe microanalysis(EPMA)techniques.Moreover,the corresponding interdiffusion coefficients were confirmed from the composition gradients of the quaternary diffusion couples using a pragmatic numerical inverse method.A composition-dependent database on the mechanical and diffusion properties was utilized to discuss the processability during the hot working.The results reveal that the solute elements Nb and Sn are strictly controlled to increase the hardness and wear resistance of Ti−Nb−Zr−Sn alloys,and the additional element Zr is mainly useful to improve the processability during the hot working.
文摘Electron probe microanalysis and SEM were employed to study the phase equilibria and diffusion paths in C Ni 8Ta, C Ni 3Ta, C Ni 2Ta diffusion couples after annealed at 1100 ℃ for 120 h or at 1200 ℃ for 120 h and then at 1100 ℃ for 24 h. Attempt was made to use the calculated stability diagram of carbon activity to explain the experimental observations. The phases formed in the diffusion layers were all in the prediced ranges.
文摘利用Fe Ni Al Co Ti多元扩散偶研究了界面处的α1+α2+(FeCo)2Ti三相在800℃下的相平衡,通过扩散偶界面两侧的相成分分析获知,Co在α2与α1相之间的分配比约为1 1,Ti在α2与α1相之间的分配比约为2 5.在Fe Ni Al合金中同时添加Co与Ti时,其在固溶体α2与α1相之间的分配特征与Fe Ni Al Co和Fe Ni Al Ti系中一样,Co与Ti在α2与α1相之间的分配比仍均大于1.
