Nonlinear dynamic analysis of multi-base seismically isolated structures with uplift potentialⅡ:verification examples

The work presented in this paper serves as numerical verification of the analytical model developed in the companion paper for nonlinear dynamic analysis of multi-base seismically isolated structures. To this end, two numerical examples have been analyzed using the computational algorithm incorporated into program 3D-BASIS-ME-MB, developed on the basis of the newly-formulated analytical model. The first example concerns a seven-story model structure that was tested on the earthquake simulator at the University at Buflhlo and was also used as a verification example for program SAP2000. The second example concerns a two-tower, multi-story structure with a split-level seismic-isolation system. For purposes of verification, key results produced by 3D-BASIS-ME-MB are compared to experimental results, or results obtained from other structural/finite element programs. In both examples, the analyzed structure is excited under conditions of bearing uplift, thus yielding a case of much interest in verifying the capabilities of the developed analysis tool.

Nonlinear dynamic analysis of multi-base seismically isolated structures with uplift potential Ⅰ:formulation

The complexity of modem seismically isolated structures requires the analysis of the structural, system and the isolation system in its entirety and the ability to capture potential discontinuous phenomena such as isolator uplift and their effects on the superstructures and the isolation hardware. In this paper, an analytical model is developed and a computational algorithm is formulated to analyze complex seismically isolated superstructures even when undergoing highly-nonlinear phenomena such as uplift. The computational model has the capability of modeling various types of isolation devices with strong nonlinearities, analyzing multiple superstructures （up to five separate superstructures） on multiple bases （up to five bases）, and capturing the effects of lateral loads on bearing axial forces, including bearing uplift. The model developed herein has been utilized to form the software platform 3D-BASIS-ME-MB, which provides the practicing engineering community with a versatile tool for analysis and design of complex structures with modem isolation systems.

Nonlinear Dynamic Analysis and Fatigue Study of Steep Wave Risers Under Irregular Loads

As a reliable alternative option for traditional steel catenary risers(SCRs),steep wave risers(SWRs)have been widely applied to deepwater oil and gas production.However,the nonlinear dynamic analysis of SWRs is more complicated than that of traditional SCRs due to their special configuration and significant geometric nonlinearity.Moreover,SWRs are highly susceptible to fatigue failure under the combined excitation of irregular waves and top floater motions(TFMs).In this study,considering irregular waves and TFMs,a numerical SWR model with an internal flow is constructed based on the slender rod model and finite element method.The Newmark-βmethod is adopted to solve the dynamic behavior of SWR.Moreover,the Palmgren-Miner rule,a specified S-N curve,and rainflow counting method are applied to estimate the fatigue damage.An efficient numerical computation procedure,i.e.,DRSWR,is programmed with MATLAB in this study.Calculation results are compared with those of OrcaFlex to verify the accuracy of the DRSWR.The nonlinear dynamic response and fatigue damage of an SWR under the combined excitation of irregular waves and TFMs are obtained,and a comprehensive parametric analysis is then conducted.The analysis results show that the buoyancy section undergoes the highest level of stress and fatigue damage under the combined excitation of irregular waves and TFMs.An internal flow with high velocity and high density produces a high level of fatigue damage.The buoyancy factor and length of the buoyancy section should be set moderately to reconcile the reduction of the top tension with increased fatigue life.These results are expected to provide some reference significance for the engineering design of SWR.

Nonlinear Dynamic Analysis of MPEG-4 Video Traffic

The main research motive is to analysis and to veiny the inherent nonlinear character of MPEG-4 video. The power spectral density estimation of the video trafiic describes its 1/f^β and periodic characteristics.The priraeipal compohems analysis of the reconstructed space dimension shows only several principal components can be the representation of all dimensions. The correlation dimension analysis proves its fractal characteristic. To accurately compute the largest Lyapunov exponent, the video traffic is divided into many parts.So the largest Lyapunov exponent spectrum is separately calculated using the small data sets method. The largest Lyapunov exponent spectrum shows there exists abundant nonlinear chaos in MPEG-4 video traffic. The conclusion can be made that MPEG-4 video traffic have complex nonlinear be havior and can be characterized by its power spectral density,principal components, correlation dimension and the largest Lyapunov exponent besides its common statistics.

Nonlinear Time History Analysis for the Different Column Orientations under Seismic Wave Synthetic Approach

The significant impact of earthquakes on human lives and the built environment underscores the extensive human and economic losses caused by structural collapses. Over the years, researchers have focused on improving seismic design to mitigate earthquake-induced damages and enhance structural performance. In this study, a specific reinforced concrete (RC) frame structure at Kyungpook National University, designed for educational purposes, is analyzed as a representative case. Utilizing SAP 2000, the research conducts a nonlinear time history analysis to assess the structural performance under seismic conditions. The primary objective is to evaluate the influence of different column section designs, while maintaining identical column section areas, on structural behavior. The study employs two distinct seismic waves from Abeno (ABN) and Takatori (TKT) for the analysis, comparing the structural performance under varying seismic conditions. Key aspects examined include displacement, base shear force, base moment, joint radians, and layer displacement angle. This research is anticipated to serve as a valuable reference for seismic restraint reinforcement work on RC buildings, enriching the methods used for evaluating structures through nonlinear time history analysis based on the synthetic seismic wave approach.

Nonlinear dynamic analysis of functionally graded carbon nanotube-reinforced composite plates using MISQ20 element

The main objective of this study is to further extend the mixed integration smoothed quadrilateral element with 20 unknowns of displacement(MISQ20)to investigate the nonlinear dynamic responses of functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates with four types of carbon nanotube distributions.The smooth finite element method is used to enhance the accuracy of the Q4 element and avoid shear locking without using any shear correction factors.This method yields accurate results even if the element exhibits a concave quadrilateral shape and reduces the error when the element meshing is rough.Additionally,the element stiffness matrix is established by integrating the boundary of the smoothing domains.The motion equation of the FG-CNTRC plates is solved by adapting the Newmark method combined with the Newton–Raphson algorithm.Subsequently,the calculation program is coded in the MATLAB software and verified by comparing it with other published solutions.Finally,the effects of the input parameters on the nonlinear vibration of the plates are investigated.

Analysis on nonlinear wind-induced dynamic response of membrane roofs with aerodynamic effects

Based on the characteristics of membrane structures and the air influence factors,this paper presented a method to simulate the air aerodynamic force effects including the added air mass,the acoustic radiation damping and the pneumatic stiffness.The infinite air was modeled using the acoustic fluid element of commercial FE software and the finite element membrane roof models were coupled with fluid models.A comparison between the results obtained by FE computation and those obtained by the vibration experiment for a cable-membrane verified the validity of the method.Furthermore,applying the method to a flat membrane roof structure and using its wind tunnel test results,the analysis of nonlinear wind-induced dynamic responses for such geometrically nonlinear roofs,including the roof-air coupled model was performed.The result shows that the air has large influence on vibrating membrane roofs according to results of comparing the nodal time-history displacements,accelerations and stress of the two different cases.Meantime,numerical studies show that the method developed can successfully solve the nonlinear wind-induced dynamic response of the membrane roof with aerodynamic effects.

Dynamic analysis of subway station subjected to internal blast loading

The study was motivated by the fact that explosion inside the subway structure may not only cause direct life loss,but also damage the subway structure and lead to further loss of lives and properties.The propagation law of explosion wave in the subway station was analyzed and a simplified model of overpressure in the subway station was also proposed.Whereafter,the improved dynamic cam-clay model of soil and the concrete damaged plasticity constitutive model were used for the dynamic analysis of the subway station.Meanwhile,the influences of soil stiffness and burial depth on the dynamic response of the subway station were looked into.The results show that the multi-peak overpressure in the subway station does not appear,and large stresses concentrate on the central column and the floor slab of the subway station,so some special reinforcement measures should be taken in these parts.The effect of soil stiffness and burial depth on the stress of the central column is little;however,the effect on the stress of the station side wall is relatively obvious.

Nonlinear analysis of r.c. framed buildings retrofitted with elastomeric and friction bearings under near-fault earthquakes

Reinforced concrete （r.c.） framed buildings designed in compliance with inadequate seismic classifi- cations and code provisions present in many cases a high vulnerability and need to be retrofitted. To this end, the insertion of a base isolation system allows a considerable reduction of the seismic loads transmitted to the super- structure. However, strong near-fault ground motions, which are characterised by long-duration horizontal pulses, may amplify the inelastic response of the superstructure and induce a failure of the isolation system. The above considerations point out the importance of checking the effectiveness of different isolation systems for retrofitting a r.c. framed structure. For this purpose, a numerical inves- tigation is carried out with reference to a six-storey r.c. framed building, which, primarily designed （as to be a fixed-base one） in compliance with the previous Italian code （DM96） for a medium-risk seismic zone, has to be retrofitted by insertion of an isolation system at the base for attaining performance levels imposed by the current Italian code （NTC08） in a high-risk seismic zone. Besides the （fixed-base） original structure, three cases of base isolation are studied： elastomeric bearings acting alone （e.g. HDLRBs）; in-parallel combination of elastomeric and friction bearings （e.g. high-damping-laminated-rubber beatings, HDLRBs and steel-PTFE sliding bearings, SBs）; friction bearings acting alone （e.g. friction pendulum bearings, FPBs）. The nonlinear analysis of the fixed-base and base-isolated structures subjected to horizontal com- ponents of near-fault ground motions is performed for checking plastic conditions at the potential critical （end） sections of the girders and columns as well as critical conditions of the isolation systems. Unexpected high val- ues of ductility demand are highlighted at the lower floors of all base-isolated structures, while re-centring problems of the base isolation systems under near-fault earthquakes are expected in case of friction beatings acting alone （i.e. FPBs） or that in combination （i.e. SBs） with HDLRBs.

Nonlinear Analysis of the Seismic Response of a Reinforced Concrete Structure Built in High Seismic Region in Algeria

The objective of this paper is to analyze the seismic response of a reinforced concrete structure dimensioned according to the Algerian seismic rules. First, we expose the approach of nonlinear time history method. Next, we describe a ten-storey reinforced concrete building braced by shear walls, implanted in the high seismicity region in Algeria. This structure is submitted to different seismic records. Finally, we analyze and interpret the seismic response in function of the deformability, shear strength, flexural strength and the bearing capacity under the compressive stress together with the local ductility. The results obtained showed that the identified structure represents a satisfied nonlinear behavior under the seismic recording of medium intensity contrary that obtained under higher earthquake of El Centro which remains unacceptable and requests a constructive improvement in the Algerian seismic rules.

Nonlinear dynamic response of beam and its application in nanomechanical resonator

Nonlinear dynamic response of nanomechanical resonator is of very important characteristics in its application. Two categories of the tension-dominant and curvaturedominant nonlinearities are analyzed. The dynamic nonlinearity of four beam structures of nanomechanical resonator is quantitatively studied via a dimensional analysis approach. The dimensional analysis shows that for the nanomechanical resonator of tension-dominant nonlinearity, its dynamic nonlinearity decreases monotonically with increasing axial loading and increases monotonically with the increasing aspect ratio of length to thickness; the dynamic nonlinearity can only result in the hardening effects. However, for the nanomechanical resonator of the curvature-dominant nonlinearity, its dynamic nonlinearity is only dependent on axial loading. Compared with the tension-dominant nonlinearity, the curvature-dominant nonlinearity increases monotonically with increasing axial loading; its dynamic nonlinearity

Seismic Deformation and Seismic Resistance Analysis of Shapai Roller Compacted Concrete Arch Dam Based on Field Monitoring and Dynamic Finite Element Method

Shapai Roller Compacted Concrete(RCC) Arch Dam is the highest RCC arch dam of the 20th century in the world with a maximum height of 132m,and it is the only concrete arch dam near the epicentre of Wenchuan earthquake on May 12th,2008.The seismic damage to the dam and the resistance of the dam has drawn great attention.This paper analyzed the response and resistance of the dam to the seismic wave using numerical simulations with comparison to the monitored data.The field investigation after the earthquake and analysis of insitu data record showed that there was only little variation in the opening size at the dam and foundation interface,transverse joints and inducing joints before and after the earthquake.The overall stability of the dam abutment resistance body was quite good except a little relaxation was observed.The results of the dynamic finite element method(FEM) showed that the sizes of the openings obtained from the numerical modeling are comparable with the monitored values,and the change of the opening size is in millimeter range.This study revealed that Shapai arch dam exhibited high seismic resistance and overload capacity in the Wenchuan earthquake event.The comparison of the monitored and simulated results showed that the numerical method applied in this paper well simulated the seismic response of the dam.The method could be useful in the future application on the safety evaluation of RCC dams.

Seismic performance evaluation of hybrid coupled shear wall system with shear and flexural fuse-type steel coupling beams

Replaceable flexural and shear fuse-type coupling beams are used in hybrid coupled shear wall(HCSW)systems,enabling concrete buildings to be promptly recovered after severe earthquakes.This study aimed to analytically evaluate the seismic behavior of flexural and shear fuse beams situated in short-,medium-and high-rise RC buildings that have HCSWs.Three building groups hypothetically located in a high seismic hazard zone were studied.A series of 2D nonlinear time history analyses was accomplished in OpenSees,using the ground motion records scaled at the design basis earthquake level.It was found that the effectiveness of fuses in HCSWs depends on various factors such as size and scale of the building,allowable rotation value,inter-story drift ratio,residual drift quantity,energy dissipation value of the fuses,etc.The results show that shear fuses better meet the requirements of rotations and drifts.In contrast,flexural fuses dissipate more energy,but their sectional stiffness should increase to meet other requirements.It was concluded that adoption of proper fuses depends on the overall scale of the building and on how associated factors are considered.

Seismic response of continuous span bridges through fiber-based finite element analysis

It is widely recognized that nonlinear time-history analysis constitutes the most accurate way to simulate the response of structures subjected to strong levels of seismic excitation. This analytical method is based on sound underlying principles and has the capability to reproduce the intrinsic inelastic dynamic behavior of structures. Nonetheless, comparisons with experimental results from large-scale testing of structures are still needed, in order to ensure adequate levels of confidence in this numerical methodology. The fiber modelling approach employed in the current endeavor inherently accounts for geometric nonlinearities and material inelasticity, without a need for calibration of plastic hinges mechanisms, typical in concentrated plasticity models. The resulting combination of analysis accuracy and modelling simplicity, allows thus to overcome the perhaps not fully justifiable sense of complexity associated to nonlinear dynamic analysis. The fiber-based modelling approach is employed in the framework of a finite element program downloaded from the Intemet for seismic response analysis of framed structures. The reliability and accuracy of the program are demonstrated by numerically reproducing pseudo-dynamic tests on a four span continuous deck concrete bridge. Modelling assumptions are discussed, together with their implications on numerical results of the nonlinear time-history analyses, which were found to be in good agreement with experimental results.

Soil-Structure Interaction Analysis of Jack-up Platforms Subjected to Monochrome and Irregular Waves

As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudean performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation （BNWF） modeling--which is based on using nonlinear springs and dampers instead of a continuum soil media--is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan （such as uplifting and rocking）, and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudeans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction （SSI）, moment- rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil- foundation interface.

A three-dimensional nonlinear reduced-order predictive joint model

Mechanical joints can have significant effects on the dynamics of assembled structures.However,the lack of efficacious predictive dynamic models tot joints hinders accurate prediction of their dynamic behavior.The goal of our work is to develop physics-based,reduced-order,finite element models that are capable of replicating the effects of joints on vi- brating structures.The authors recently developed the so-called two-dimensional adjusted lwan beam element(2-D AIBE) to simulate the hysteretic behavior of bolted joints in 2-D beam structures.In this paper,2-D AIBE is extended to three-di- mensional cases by formulating a three-dimensional adjusted lwan beam element(3-D AIBE).hupulsive loading experi- ments are applied to a jointed frame structure and a beam structure containing the same joint.The frame is subjected to ex- citation out of plane so that the joint is under rotation and single axis bending.By assuming that the rotation in the joint is linear elastic,the parameters of the joint associated with bending in the flame are identified from acceleration responses of the jointed beam structure,using a multi-layer teed-torward neural network(MLFF).Numerieal simulation is then per- formed on the frame structure using the identified parameters.The good agreement between the simulated and experimental impulsive acceleration responses of the frame structure validates the efficacy of the presented 3-D AIBE,and indicates that the model can potentially be applied to more complex structural systems with joint parameters identified from a relatively simple structure.

Nonlinear performance of classical damping

The performance of a classical damping matrix, constructed either from the use of initial structural properties or current structural properties, in the step-by-step solution of a nonlinear multiple degree of freedom （MDOF） system is analytically evaluated. The analytical results are confirmed by numerical examples. Consequently, some conclusions are drawn from these analytical results that might be considered as rough guidelines for practical applications. It is found that a classical damping matrix constructed from initial structural properties is adequate for practical applications, since it has approximately the same damping effect as obtained by current structural properties and is more efficient in terms of computing.

Effects of Unbalance Location on Dynamic Characteristics of High-speed Gasoline Engine Turbocharger with Floating Ring Bearings

For the high-speed gasoline engine turbocharger rotor, due to the heterogeneity of multiple parts material, manufacturing and assembly errors, running wear in impeller and uneven carbon of turbine, the random unbalance usually can be developed which will induce excessive rotor vibration, and even lead to nonlinear vibration accidents. However, the investigation of unbalance location on the nonlinear high-speed turbocharger rotordynamic characteristics is less. In order to discuss the rotor unbalance location effects of turbocharger with nonlinear floating ring bearings（FRBs）, the realistic turbocharger of gasoline engine is taken as a research object. The rotordynamic equations of motion under the condition of unbalance are derived by applied unbalance force and nonlinear oil film force of FRBs. The FE model of turbocharger rotor-bearing system is modeled which includes the unbalance excitation and nonlinear FRBs. Under the conditions of four different applied locations of unbalance, the nonlinear transient analyses are performed based on the rotor FEM. The differences of dynamic behavior are obvious to the turbocharger rotor systems for four conditions, and the bifurcation phenomena are different. From the results of waterfall and transient response analysis, the speed for the appearance of fractional frequency is not identical and the amplitude magnitude is different from the different unbalance locations, and the non-synchronous vibration does not occur in the turbocharger and the amplitude is relative stable and minimum under the condition 4. The turbocharger vibration and non-synchronous components could be reduced or suppressed by controlling the applied location of unbalance, which is helpful for the dynamic design, fault diagnosis and vibration control of the high-speed gasoline engine turbochargers.

The role of soil in structure response of a building damaged by the 26 December 2018 earthquake in Italy

Local soil conditions can significantly modify the seismic motion expected on the soil surface.In most cases,the indications concerning the influence of the underlying soil provided by the in-force European and Italian Building Codes underestimate the real seismic amplification effects.For this reason,numerical analyses of the local seismic response(LSR)have been encouraged to estimate the soil filtering effects.These analyses are generally performed in free-field conditions,ignoring the presence of superstructures and,therefore,the effects of dynamic soil-structure interaction(DSSI).Moreover,many studies on DSSI are characterised by a sophisticated modelling of the structure and an approximate modelling of the soil(using springs and dashpots at the foundation level);while others are characterised by a sophisticated modelling of the soil and an approximate modelling of the structure(considered as a simple linear elastic structure or a single degree of freedom system).This paper presents a set of finite element method(FEM)analyses on a fully-coupled soil-structure system for a reinforced concrete building located in Fleri(Catania,Italy).The building,designed for gravity loads only,was severely damaged during the 26 December 2018 earthquake.The soil was modelled considering an equivalent visco-elastic behaviour,while the structure was modelled assuming both the visco-elastic and visco-inelastic behaviours.The comparison made between the results of the FEM analyses and the observed damage is valuable.