The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elem...The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elements. Aiming at the problem of insufficient accuracy of the existing physical models for predicting the peak overpressure of ground reflected waves, two physics-informed machine learning models are constructed. The results demonstrate that the machine learning models, which incorporate physical information by predicting the deviation between the physical model and actual values and adding a physical loss term in the loss function, can accurately predict both the training and out-oftraining dataset. Compared to existing physical models, the average relative error in the predicted training domain is reduced from 17.459%-48.588% to 2%, and the proportion of average relative error less than 20% increased from 0% to 59.4% to more than 99%. In addition, the relative average error outside the prediction training set range is reduced from 14.496%-29.389% to 5%, and the proportion of relative average error less than 20% increased from 0% to 71.39% to more than 99%. The inclusion of a physical loss term enforcing monotonicity in the loss function effectively improves the extrapolation performance of machine learning. The findings of this study provide valuable reference for explosion hazard assessment and anti-explosion structural design in various fields.展开更多
Overpressure is significant to the exploration and exploitation of petroleum due to its influence on hydrocarbon accumulation and drilling strategies.The deep-burial hydrocarbon reservoirs of Jurassic strata in the ce...Overpressure is significant to the exploration and exploitation of petroleum due to its influence on hydrocarbon accumulation and drilling strategies.The deep-burial hydrocarbon reservoirs of Jurassic strata in the central Junggar Basin are characterized by intensive overpressure,whose origins are complex and still unclear.In this study,Bowers'method and sonic velocity-density crossplot method based on well logging data were used as a combination for overpressure judgements in geophysics.Furthermore,the corresponding geological processes were analysed in quality and quantity to provide a rational comprehension of the overpressure origins and the model of overpressure evolution and hy-drocarbon accumulation processes.The results showed that hydrocarbon generation in the Jurassic source rocks led to overpressure in the mudstones,while hydrocarbon generation in Permian source rocks led to overpressure in the sandstone reservoirs in Jurassic strata by vertical pressure transfer.The burial and thermal history indicated that the aquathermal effect of pore fluids by temperature increase in deep strata is also an important origin of overpressure,while disequilibrium compaction may not be the dominant cause for the overpressure in deep-buried strata.Furthermore,the continuous tectonic compression in both the north-south and west-east trends from the Jurassic period to the present may also have enhanced the overpressure in deep strata.Meanwhile,the developed faults formed by intensive tectonic compression led to pressure transfer from source rocks to the Jurassic reservoirs.Overpressured geofluids with hydrocarbons migrated to sandstone reservoirs and aggravated the over-pressure in the Jurassic strata.To conclude,the intensive overpressure in the central Junggar Basin is attributed to the combination of multiple mechanisms,including hydrocarbon generation,the aqua-thermal effect,tectonic compression and pressure transfer.Furthermore,the developed overpressure indicated hydrocarbon migration and accumulation processes and the potential of oil and gas reservoirs in deeply buried strata.We hope this study will provide a systematic research concept for overpressure origin analysis and provide guidance for petroleum exploration and exploitation in deep-buried strata.展开更多
Based on the data of measured formation pressure, drilling fluid density of key exploration wells and calculated pressure by well logging, combined with the analysis of natural gas geological conditions, the character...Based on the data of measured formation pressure, drilling fluid density of key exploration wells and calculated pressure by well logging, combined with the analysis of natural gas geological conditions, the characteristics and formation mechanisms of formation fluid overpressure systems in different foreland basins and the relationship between overpressure systems and large-scale gas accumulation are discussed.(1) The formation mechanisms of formation overpressure in different foreland basins are different. The formation mechanism of overpressure in the Kuqa foreland basin is mainly the overpressure sealing of plastic salt gypsum layer and hydrocarbon generation pressurization in deep–ultra-deep layers, that in the southern Junggar foreland basin is mainly hydrocarbon generation pressurization and under-compaction sealing, and that in the western Sichuan foreland basin is mainly hydrocarbon generation pressurization and paleo-fluid overpressure residual.(2) There are three common characteristics in foreland basins, i.e. superimposed development of multi-type overpressure and multi-layer overpressure, strong–extremely strong overpressure developed in a closed foreland thrust belt, and strong–extremely strong overpressure developed in a deep foreland uplift area.(3) There are four regional overpressure sealing and storage mechanisms, which play an important role in controlling large gas fields, such as the overpressure of plastic salt gypsum layer, the overpressure formed by hydrocarbon generation pressurization, the residual overpressure after Himalayan uplift and denudation, and the under-compaction overpressure.(4) Regional overpressure is an important guarantee for forming large gas fields, the sufficient gas source, large-scale reservoir and trap development in overpressure system are the basic conditions for forming large gas fields, and the overpressure system is conducive to forming deep to ultra-deep large gas fields.展开更多
Aiming at the differential distribution of overpressure in vertical and lateral directions in the foreland thrust belt in the southern margin of Junggar Basin,the study on overpressure origin identification and overpr...Aiming at the differential distribution of overpressure in vertical and lateral directions in the foreland thrust belt in the southern margin of Junggar Basin,the study on overpressure origin identification and overpressure evolution simulation is carried out.Based on the measured formation pressure,drilling fluid density and well logging data,overpressure origin identification and overpressure evolution simulation techniques are used to analyze the vertical and lateral distribution patterns of overpressure,genetic mechanisms of overpressure in different structural belts and causes of the differential distribution of overpressure,and the controlling effects of overpressure development and evolution on the formation and distribution of oil and gas reservoirs.The research shows that overpressure occurs in multiple formations vertically in the southern Junggar foreland thrust belt,the deeper the formation,the bigger the scale of the overpressure is.Laterally,overpressure is least developed in the mountain front belt,most developed in the fold anticline belt,and relatively developed in the slope belt.The differential distribution of overpressure is mainly controlled by the differences in disequilibrium compaction and tectonic compression strengths of different belts.The vertical overpressure transmission caused by faults connecting the deep overpressured system has an important contribution to the further increase of the overpressure strength in this area.The controlling effect of overpressure development and evolution on hydrocarbon accumulation and distribution shows in the following aspects:When the strong overpressure was formed before reservoir becoming tight overpressure maintains the physical properties of deep reservoirs to some extent,expanding the exploration depth of deep reservoirs;reservoirs below the overpressured mudstone cap rocks of the Paleogene Anjihaihe Formation and Lower Cretaceous Tugulu Group are main sites for oil and gas accumulation;under the background of overall overpressure,both overpressure strength too high or too low are not conducive to hydrocarbon enrichment and preservation,and the pressure coefficient between 1.6 and 2.1 is the best.展开更多
Overpressure is a hot topic in the study of sedimentary basins. It is important in generation, maturation migration, and accumulation of hydrocarbon, but the effects of overpressure on rock frame have not been investi...Overpressure is a hot topic in the study of sedimentary basins. It is important in generation, maturation migration, and accumulation of hydrocarbon, but the effects of overpressure on rock frame have not been investigated. In this study, experiments were carried out to study the effects of overpressure on rock frame structures using five core samples from the Junggar basin, Northwest China. The deformations and velocities for the samples were measured at different effective pressures related to non-equilibrium compaction and fluid expansion overpressure mechanisms. The results show that the effect of overpressure on rock frames gradually increases when the effective pressure drops down to a certain value (called critical pressure). Moreover, non-equilibrium compaction mechanism has more effects on rock frames than fluid expansion mechanism under the same effective pressure. Furthermore to study rock frame structural changes, we use Kuster and Toksoz's expressions to simulate the effective aspect ratios of inclusions a (penny shapes) for different effective pressures. The results show that the a decreases dramatically when the effective pressure decreases from the critical pressure. Changes of a can be interpreted as responses to the rock frame changes when grains conform one another by rotating and self-adjusting. However, different mechanisms of overpressure have different effects on rock frames. The rock frame can be affected more easily by overpressure in shallow regions generated by non-equilibrium compaction mechanism. Once this kind of rock frames are preserved after overpressure releases to a normal hydrostatic pressure, they can be identified by their specific rock frame characters. This method provides a new way to study overpressure release and fluid migration and accumulation.展开更多
Because single trigger system is unreliable for shock wave overpressure test, this paper presents a multi-trigger overpressure test system. The large memory capacity is divided into parts to achieve data acquisition a...Because single trigger system is unreliable for shock wave overpressure test, this paper presents a multi-trigger overpressure test system. The large memory capacity is divided into parts to achieve data acquisition and storage with multiple triggers. Compared with conventional single-shot storage test system, this system can prevent false trigger and improve reliability of the test. By using explosion time to extract valid signal segments, it improves the efficiency of data recovery. These characteristics of the system contribute to multi-point test. After the dynamic characteristics of the system are calibrated, the valid data can be obtained in explosion experiments. The results show that the multi-trigger test system has higher reliability than single trigger test system.展开更多
The origin of overpressure and its effect on petroleum accumulation in the large Permian/Triassic conglomerate oil province in the Mahu Sag,Junggar Basin have been investigated based on comprehensive analysis of log c...The origin of overpressure and its effect on petroleum accumulation in the large Permian/Triassic conglomerate oil province in the Mahu Sag,Junggar Basin have been investigated based on comprehensive analysis of log curve combinations,loading-unloading curves,sonic velocity-density cross-plot,and porosity comparison data.The study results show that there are two kinds of normal compaction models in the study area,namely,two-stage linear model and exponent model;overpressure in the large conglomerate reservoirs including Lower Triassic Baikouquan Formation and Permian Upper and Lower Wu’erhe Formations is the result of pressure transfer,and the source of overpressure is the overpressure caused by hydrocarbon generation of Permian Fengcheng Formation major source rock.The petroleum migrated through faults under the driving of hydrocarbon generation overpressure into the reservoirs to accumulate,forming the Permian and Triassic overpressure oil and gas reservoirs.The occurrence and distribution of overpressure are controlled by the source rock maturity and strike-slip faults connecting the source rock and conglomerate reservoirs formed from Indosinian Movement to Himalayan Movement.As overpressure is the driving force for petroleum migration in the large Mahu oil province,the formation and distribution of petroleum reservoirs above the source rock in this area may have a close relationship with the occurrence of overpressure.展开更多
Taking the inter-salt organic-rich shales in the third member of Paleogene Shahejie Formation(Es3)of Dongpu sag in Bohai Bay Basin as an example,the origin of overpressure,development characteristics,formation and evo...Taking the inter-salt organic-rich shales in the third member of Paleogene Shahejie Formation(Es3)of Dongpu sag in Bohai Bay Basin as an example,the origin of overpressure,development characteristics,formation and evolution mechanism,formation stages and geological significance on shale oil and gas of overpressure fractures in the inter-salt shale reservoir were investigated by means of thin section identification,scanning electron microscopy observation,analysis of fluid inclusions,logging data analysis,and formation pressure inversion.The results show that overpressure is universal in the salt-lake basin of Dongpu sag,and under-compaction caused by the sealing of salt-gypsum layer,pressurization due to hydrocarbon generation,transformation and dehydration of clay minerals,and fault sealing are the 4 main factors leading to the occurrence of overpressure.The overpressure fractures are small in scale,with an average length of 356.2μm and an average underground opening of 11.6μm.But they are densely developed,with an average surface density of 0.76 cm/cm2.Moreover,they are often accompanied by oil and gas charging,and thus high in effectiveness.Overpressure fractures were mainly formed during two periods of large-scale oil and gas charging,approximately 25-30 Ma ago and 0-5 Ma ago.Inter-salt overpressure fractures play dual roles as the storage space and migration paths of shale oil and gas.They contribute 22.3%to the porosity of shale reservoir and 51.4%to the permeability.They can connect fracture systems of multiple scales,greatly improving the quality of shale reservoir.During the development of shale oil and gas,inter-salt overpressure fractures can affect the extension and morphology of hydraulic fractures,giving rise to complex and highly permeable volumetric fracture networks,improving hydraulic fracturing effect and enhancing shale oil and gas productivity.展开更多
The paper proposes four indicators to guide sensors layout in practical experiment on explosion overpressure filed construction based on tomographic method with high reconstruction accuracy and the least sensors. Firs...The paper proposes four indicators to guide sensors layout in practical experiment on explosion overpressure filed construction based on tomographic method with high reconstruction accuracy and the least sensors. First, genetic algorithm is adopted to conduct global search and sensor layout optimization method is selected to satisfy four indicators. Then, by means of Matlab, the variation of these four indicators with different sensor layouts and reconstruction accuracy are analyzed and discussed. The results indicate that the sensor layout method proposed by this paper can reconstruct explosion overpressure field at the highest precision by a minimum number of sensors. It will guide actual explosion experiments in a cost-effective way.展开更多
The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem.It is generally considered that the waveform consists of overpressure peak,positive pressure zone and negative pr...The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem.It is generally considered that the waveform consists of overpressure peak,positive pressure zone and negative pressure zone.Most of current practice usually considers only the positive pressure.Many empirical relations are available to predict overpressure peak,the positive pressure action time and pressure decay law.However,there are few models that can predict the whole waveform.The whole process of explosion shock wave overpressure,which was expressed as the product of the three factor functions of peak,attenuation and oscillation,was proposed in the present work.According to the principle of explosion similarity,the scaled parameters were introduced and the empirical formula was absorbed to form a mathematical model of shock wave overpressure.Parametric numerical simulations of free-field air explosions were conducted.By experimental verification of the AUTODYN numerical method and comparing the analytical and simulated curves,the model is proved to be accurate to calculate the shock wave overpressure under free-field air explosion.In addition,through the model the shock wave overpressure at different time and distance can be displayed in three dimensions.The model makes the time needed for theoretical calculation much less than that for numerical simulation.展开更多
Blasting is the live wire of mining and its operations,with air overpressure(AOp)recognised as an end product of blasting.AOp is known to be one of the most important environmental hazards of mining.Further research i...Blasting is the live wire of mining and its operations,with air overpressure(AOp)recognised as an end product of blasting.AOp is known to be one of the most important environmental hazards of mining.Further research in this area of mining is required to help improve on safety of the working environment.Review of previous studies has shown that many empirical and artificial intelligence(AI)methods have been proposed as a forecasting model.As an alternative to the previous methods,this study proposes a new class of advanced artificial neural network known as brain inspired emotional neural network(BIENN)to predict AOp.The proposed BI-ENN approach is compared with two classical AOp predictors(generalised predictor and McKenzie formula)and three established AI methods of backpropagation neural network(BPNN),group method of data handling(GMDH),and support vector machine(SVM).From the analysis of the results,BI-ENN is the best by achieving the least RMSE,MAPE,NRMSE and highest R,VAF and PI values of 1.0941,0.8339%,0.1243%,0.8249,68.0512%and 1.2367 respectively and thus can be used for monitoring and controlling AOp.展开更多
The Damintun depression is one of the four depressions in the Liaohe basin in northern China, and is a rift basin developed in the Paleogene. This paper discusses in detail the characteristics of pressure and fluid po...The Damintun depression is one of the four depressions in the Liaohe basin in northern China, and is a rift basin developed in the Paleogene. This paper discusses in detail the characteristics of pressure and fluid potential of the Damintun depression based on a synthesis of the data from boreholes, well tests and seismic surveys. Data from sonic logs, well tests and seismic velocity measurements are used to study the pressure characteristics of the areas. From the sonic log data, shales can be characterized as normally pressured, slightly overpressured or highly overpressured; from the well test data, the pressure-depth gradient in oil-producing intervals implies hydrostatic pressure in general. Most seismic profiles in the Damintun depression are of sufficiently high quality for seismic velocities to be measured. The fluid pressures, excess pressures and pressure coefficients in 47 representative seismic profiles are predicted using formula calculation methods, and further transformed to fluid potenti展开更多
The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3,...The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.展开更多
AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a qua...AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a quantitative description of dependence of flame propagation speed and explosion overpressure on obstacles number, blockage ratio and interval distance. Computational results indicate that the obstacles play a significant role in determining the flame transmission speed and explosion overpressure in gas explosions. With the increase of blockage ratio, the explosion overpressure gradually rises. Nevertheless, the flame speed does not always increase along with increasing blockage ratio, but subsequently begins to decrease as the blockage ratio increases to some extend. Also, the interval distance between obstacles strongly influences flame behavior and explosion overpressure. When the obstacle interval distance is equal to inner diameter of the tube, the average flame speed in the obstacle zone and the peak overpressure in tube all reach maximum values.展开更多
Shockwaves from fuel-air explosive(FAE)cloud explosions may cause significant casualties.The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves.In this paper,a finite elemen...Shockwaves from fuel-air explosive(FAE)cloud explosions may cause significant casualties.The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves.In this paper,a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction.The model is verified with the experimental data of a fourfoldsource FAE explosion,with the total fuel mass of 340 kg.Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source.In the case of multisources,the overpressure fields are influenced significantly by source scattering distance and source number.Subsequently,damage ranges of overpressure under three different levels are calculated.Within a suitable source scattering distance,the damage range of multi-sources situation is greater than that of the single-source,under the same amount of total fuel mass.This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.展开更多
Overpressure systems are widely developed in the central depression and paleo-uplift in the Yinggehai and Qiongdongnan basins. They can be divided into three types according to the origin of abnormally high formation ...Overpressure systems are widely developed in the central depression and paleo-uplift in the Yinggehai and Qiongdongnan basins. They can be divided into three types according to the origin of abnormally high formation pressure in the reservoirs, i.e. the autochthonous, vertically-transmitted and laterally-transmitted types. The autochthonous overpressure system results from rapid disequilibrium sediment loading and compaction. In the allochthonous overpressure system, the increase of fluid pressure in sandstone originates from the invasion of overpressured fluid flowing vertically or laterally through the conduit units. The autochthonous overpressure system occurs in the deep-lying strata of Neogene age in the central depression of the Yinggehai and Qiongdongnan basins. The vertically transmitted overpressure system is developed in the shallow strata of Late Miocene and Pliocene ages in the diapiric zone of the central Yinggehai basin, and the laterally transmitted overpressure system occurs in the Oligocene strata of paleo-uplifts, such as the structure of Ya-211 in the Qiongdongnan basin. The results indicate that the autochthonous overpressure system is generally a closed one, which is unfavorable for the migration and accumulation of hydrocarbons. In the allochthonous overpressure system, hydrocarbon accumulation depends on the relationship between the formation of overpressure systems and the spatial location and duration of hydrocarbon migration. The interval overlying the overpressure system is usually a favorable hydrocarbon accumulation zone if the duration of fluid expulsion coincides with that of hydrocarbon accumulation.展开更多
Ballistic impact and sealed chamber tests were performed on the steel-encased reactive material projectile(SERMP)to understand its behind-plate overpressure effect when impacting the thin aluminum plates.The reactive ...Ballistic impact and sealed chamber tests were performed on the steel-encased reactive material projectile(SERMP)to understand its behind-plate overpressure effect when impacting the thin aluminum plates.The reactive material encased with a 1.5 mm thick 30CrMnSiNi2A steel shell was launched onto the initially sealed test chamber with a 3 mm thick 2024-T3 thin aluminum cover plate.Moreover,the overpressure signals in the test chamber were recorded by pressure sensors.The experimental results indicate an unusual behind-plate overpressure effect:as the density of the projectile increases from 6.43 g/cm^(3) to 7.58 g/cm^(3) by increasing the content of tungsten powder,although its total chemical energy decreases,it produces a higher behind-target overpressure at a lower impact velocity.A theoretical model is proposed to predict the reaction length of reactive material inside the projectile based on one-dimensional shock wave theory to understand this unexpected result.In addition,the deviation between the actual energy release and the theoretical calculation results,also the variation of overpressure rise time are analyzed and discussed.As the analyses show,when the SERMP successfully penetrates the cover plate,an increasing density of the reactive material inside the projectile always means that the delaying rarefaction wave effect,an increase of its internal pressure and strain rate levels.These factors lead to the increase of the overpressure limit velocity and reaction extent of the reactive material,while the overpressure rise time decreases.展开更多
The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on pet...The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on petroleum accumulation. (1) The overpressured fluid flow has enhanced the maturation of shallow-buried source rocks, which has caused the source rocks that would have remained immature under the conduction background to be mature for hydrocarbon generation. As a result, the overpressured fluid flow has increased the volume and interval of mature source rocks. (2) The overpressured fluid flow has strong extraction effects on the immature or low-mature source rocks in the shallow parts. This has increased, to some extent, the expulsion efficiency of the source rocks. More importantly, the extraction effects have strongly limited the effectiveness of biomarker parameters from oil and condensate in reflecting the source and maturity of the oil and gas. (3) The flow has caused the sandstones in the shallow parts to get into the late diagenesis stage, and significantly reduced the porosity and permeability of the sandstones. This study confirms that even in sedimentary basins in which no topography-driven groundwater flow systems have ever developed, the cross-formation migration of overpressured fluids and the resultant energy conduction and material exchange can significantly affect the thermal regime, source rock maturation and sandstone diagenesis. As a result, the effects of overpressured fluid flow must be taken into account in analyzing the mechanism of petroleum accumulation.展开更多
Through analyzing experimental data of gas explosions in excavation roadwaysand the forecast models of the literature, Found that there is no direct proportional linearcorrelation between overpressure and the square r...Through analyzing experimental data of gas explosions in excavation roadwaysand the forecast models of the literature, Found that there is no direct proportional linearcorrelation between overpressure and the square root of the accumulated volume of gas,the square root of the propagation distance multiplicative inverse.Also, attenuation speedof the forecast model calculation is faster than that of experimental data.Based on theoriginal forecast models and experimental data, deduced the relation of factors by introducinga correlation coefficient with concrete volume and distance, which had been verifiedby the roadway experiment data.The results show that it is closer to the roadway experimentaldata and the overpressure amount increases first then decreases with thepropagation distance.展开更多
Sub-harmonic component generated from microbubbles is proven to be potentially used in noninvasive blood pressure measurement. Both theoretical and experimental studies are performed in the present work to investigate...Sub-harmonic component generated from microbubbles is proven to be potentially used in noninvasive blood pressure measurement. Both theoretical and experimental studies are performed in the present work to investigate the dependence of the sub-harmonic generation on the overpressure with different excitation pressure amplitudes and pulse lengths. With 4-MHz ultrasound excitation at an applied acoustic pressure amplitude of 0.24 MPa, the measured sub-harmonic amplitude exhibits a decreasing change as overpressure increases; while non-monotonic change is observed for the applied acoustic pressures of 0.36 MPa and 0.48 MPa, and the peak position in the curve of the sub-harmonic response versus the overpres- sure shifts toward higher overpressure as the excitation pressure amplitude increases. Furthermore, the exciting pulse with long duration could lead to a better sensitivity of the sub-harmonic response to overpressure. The measured results are ex- plained by the numerical simulations based on the Marmottant model. The numerical simulations qualitatively accord with the measured results. This work might provide a preliminary proof for the optimization of the noninvasive blood pressure measurement through using sub-harmonic generation from microbubbles.展开更多
文摘The accurate prediction of peak overpressure of explosion shockwaves is significant in fields such as explosion hazard assessment and structural protection, where explosion shockwaves serve as typical destructive elements. Aiming at the problem of insufficient accuracy of the existing physical models for predicting the peak overpressure of ground reflected waves, two physics-informed machine learning models are constructed. The results demonstrate that the machine learning models, which incorporate physical information by predicting the deviation between the physical model and actual values and adding a physical loss term in the loss function, can accurately predict both the training and out-oftraining dataset. Compared to existing physical models, the average relative error in the predicted training domain is reduced from 17.459%-48.588% to 2%, and the proportion of average relative error less than 20% increased from 0% to 59.4% to more than 99%. In addition, the relative average error outside the prediction training set range is reduced from 14.496%-29.389% to 5%, and the proportion of relative average error less than 20% increased from 0% to 71.39% to more than 99%. The inclusion of a physical loss term enforcing monotonicity in the loss function effectively improves the extrapolation performance of machine learning. The findings of this study provide valuable reference for explosion hazard assessment and anti-explosion structural design in various fields.
基金supported by the National Natural Science Foundation of China(Grant No.41972124)。
文摘Overpressure is significant to the exploration and exploitation of petroleum due to its influence on hydrocarbon accumulation and drilling strategies.The deep-burial hydrocarbon reservoirs of Jurassic strata in the central Junggar Basin are characterized by intensive overpressure,whose origins are complex and still unclear.In this study,Bowers'method and sonic velocity-density crossplot method based on well logging data were used as a combination for overpressure judgements in geophysics.Furthermore,the corresponding geological processes were analysed in quality and quantity to provide a rational comprehension of the overpressure origins and the model of overpressure evolution and hy-drocarbon accumulation processes.The results showed that hydrocarbon generation in the Jurassic source rocks led to overpressure in the mudstones,while hydrocarbon generation in Permian source rocks led to overpressure in the sandstone reservoirs in Jurassic strata by vertical pressure transfer.The burial and thermal history indicated that the aquathermal effect of pore fluids by temperature increase in deep strata is also an important origin of overpressure,while disequilibrium compaction may not be the dominant cause for the overpressure in deep-buried strata.Furthermore,the continuous tectonic compression in both the north-south and west-east trends from the Jurassic period to the present may also have enhanced the overpressure in deep strata.Meanwhile,the developed faults formed by intensive tectonic compression led to pressure transfer from source rocks to the Jurassic reservoirs.Overpressured geofluids with hydrocarbons migrated to sandstone reservoirs and aggravated the over-pressure in the Jurassic strata.To conclude,the intensive overpressure in the central Junggar Basin is attributed to the combination of multiple mechanisms,including hydrocarbon generation,the aqua-thermal effect,tectonic compression and pressure transfer.Furthermore,the developed overpressure indicated hydrocarbon migration and accumulation processes and the potential of oil and gas reservoirs in deeply buried strata.We hope this study will provide a systematic research concept for overpressure origin analysis and provide guidance for petroleum exploration and exploitation in deep-buried strata.
基金Supported by the Petrochina Science and Technology Major Project(2016B-05)。
文摘Based on the data of measured formation pressure, drilling fluid density of key exploration wells and calculated pressure by well logging, combined with the analysis of natural gas geological conditions, the characteristics and formation mechanisms of formation fluid overpressure systems in different foreland basins and the relationship between overpressure systems and large-scale gas accumulation are discussed.(1) The formation mechanisms of formation overpressure in different foreland basins are different. The formation mechanism of overpressure in the Kuqa foreland basin is mainly the overpressure sealing of plastic salt gypsum layer and hydrocarbon generation pressurization in deep–ultra-deep layers, that in the southern Junggar foreland basin is mainly hydrocarbon generation pressurization and under-compaction sealing, and that in the western Sichuan foreland basin is mainly hydrocarbon generation pressurization and paleo-fluid overpressure residual.(2) There are three common characteristics in foreland basins, i.e. superimposed development of multi-type overpressure and multi-layer overpressure, strong–extremely strong overpressure developed in a closed foreland thrust belt, and strong–extremely strong overpressure developed in a deep foreland uplift area.(3) There are four regional overpressure sealing and storage mechanisms, which play an important role in controlling large gas fields, such as the overpressure of plastic salt gypsum layer, the overpressure formed by hydrocarbon generation pressurization, the residual overpressure after Himalayan uplift and denudation, and the under-compaction overpressure.(4) Regional overpressure is an important guarantee for forming large gas fields, the sufficient gas source, large-scale reservoir and trap development in overpressure system are the basic conditions for forming large gas fields, and the overpressure system is conducive to forming deep to ultra-deep large gas fields.
基金PetroChina Science and Technology Development Project(2021DJ0105,2021DJ0203,2021DJ0303)National Natural Science Foundation of China(42172164,42002177)。
文摘Aiming at the differential distribution of overpressure in vertical and lateral directions in the foreland thrust belt in the southern margin of Junggar Basin,the study on overpressure origin identification and overpressure evolution simulation is carried out.Based on the measured formation pressure,drilling fluid density and well logging data,overpressure origin identification and overpressure evolution simulation techniques are used to analyze the vertical and lateral distribution patterns of overpressure,genetic mechanisms of overpressure in different structural belts and causes of the differential distribution of overpressure,and the controlling effects of overpressure development and evolution on the formation and distribution of oil and gas reservoirs.The research shows that overpressure occurs in multiple formations vertically in the southern Junggar foreland thrust belt,the deeper the formation,the bigger the scale of the overpressure is.Laterally,overpressure is least developed in the mountain front belt,most developed in the fold anticline belt,and relatively developed in the slope belt.The differential distribution of overpressure is mainly controlled by the differences in disequilibrium compaction and tectonic compression strengths of different belts.The vertical overpressure transmission caused by faults connecting the deep overpressured system has an important contribution to the further increase of the overpressure strength in this area.The controlling effect of overpressure development and evolution on hydrocarbon accumulation and distribution shows in the following aspects:When the strong overpressure was formed before reservoir becoming tight overpressure maintains the physical properties of deep reservoirs to some extent,expanding the exploration depth of deep reservoirs;reservoirs below the overpressured mudstone cap rocks of the Paleogene Anjihaihe Formation and Lower Cretaceous Tugulu Group are main sites for oil and gas accumulation;under the background of overall overpressure,both overpressure strength too high or too low are not conducive to hydrocarbon enrichment and preservation,and the pressure coefficient between 1.6 and 2.1 is the best.
基金This paper is jointly supported by the National Natural Science Foundation of China (No.40602015)Research Foundation for Outstanding Young Teachers,China University of Geosciences (Wuhan) (CUGQNL0605)+1 种基金Open Foundation of the Key Laboratory of Theory and Technology of Petroleum Exploration and Development in Hubei Province (YQ2006KF17)Open Foundation of CAS Key Laboratory of Marginal Sea Geology,South China Sea Institute of Oceanology (MSGL0607).
文摘Overpressure is a hot topic in the study of sedimentary basins. It is important in generation, maturation migration, and accumulation of hydrocarbon, but the effects of overpressure on rock frame have not been investigated. In this study, experiments were carried out to study the effects of overpressure on rock frame structures using five core samples from the Junggar basin, Northwest China. The deformations and velocities for the samples were measured at different effective pressures related to non-equilibrium compaction and fluid expansion overpressure mechanisms. The results show that the effect of overpressure on rock frames gradually increases when the effective pressure drops down to a certain value (called critical pressure). Moreover, non-equilibrium compaction mechanism has more effects on rock frames than fluid expansion mechanism under the same effective pressure. Furthermore to study rock frame structural changes, we use Kuster and Toksoz's expressions to simulate the effective aspect ratios of inclusions a (penny shapes) for different effective pressures. The results show that the a decreases dramatically when the effective pressure decreases from the critical pressure. Changes of a can be interpreted as responses to the rock frame changes when grains conform one another by rotating and self-adjusting. However, different mechanisms of overpressure have different effects on rock frames. The rock frame can be affected more easily by overpressure in shallow regions generated by non-equilibrium compaction mechanism. Once this kind of rock frames are preserved after overpressure releases to a normal hydrostatic pressure, they can be identified by their specific rock frame characters. This method provides a new way to study overpressure release and fluid migration and accumulation.
文摘Because single trigger system is unreliable for shock wave overpressure test, this paper presents a multi-trigger overpressure test system. The large memory capacity is divided into parts to achieve data acquisition and storage with multiple triggers. Compared with conventional single-shot storage test system, this system can prevent false trigger and improve reliability of the test. By using explosion time to extract valid signal segments, it improves the efficiency of data recovery. These characteristics of the system contribute to multi-point test. After the dynamic characteristics of the system are calibrated, the valid data can be obtained in explosion experiments. The results show that the multi-trigger test system has higher reliability than single trigger test system.
基金Supported by the National Natural Science Foundation of China(41502132)the China National Science and Technology Major Project(2017ZX05001-004)
文摘The origin of overpressure and its effect on petroleum accumulation in the large Permian/Triassic conglomerate oil province in the Mahu Sag,Junggar Basin have been investigated based on comprehensive analysis of log curve combinations,loading-unloading curves,sonic velocity-density cross-plot,and porosity comparison data.The study results show that there are two kinds of normal compaction models in the study area,namely,two-stage linear model and exponent model;overpressure in the large conglomerate reservoirs including Lower Triassic Baikouquan Formation and Permian Upper and Lower Wu’erhe Formations is the result of pressure transfer,and the source of overpressure is the overpressure caused by hydrocarbon generation of Permian Fengcheng Formation major source rock.The petroleum migrated through faults under the driving of hydrocarbon generation overpressure into the reservoirs to accumulate,forming the Permian and Triassic overpressure oil and gas reservoirs.The occurrence and distribution of overpressure are controlled by the source rock maturity and strike-slip faults connecting the source rock and conglomerate reservoirs formed from Indosinian Movement to Himalayan Movement.As overpressure is the driving force for petroleum migration in the large Mahu oil province,the formation and distribution of petroleum reservoirs above the source rock in this area may have a close relationship with the occurrence of overpressure.
基金Supported by the China National Science and Technology Major Project(2011ZX05006-004)
文摘Taking the inter-salt organic-rich shales in the third member of Paleogene Shahejie Formation(Es3)of Dongpu sag in Bohai Bay Basin as an example,the origin of overpressure,development characteristics,formation and evolution mechanism,formation stages and geological significance on shale oil and gas of overpressure fractures in the inter-salt shale reservoir were investigated by means of thin section identification,scanning electron microscopy observation,analysis of fluid inclusions,logging data analysis,and formation pressure inversion.The results show that overpressure is universal in the salt-lake basin of Dongpu sag,and under-compaction caused by the sealing of salt-gypsum layer,pressurization due to hydrocarbon generation,transformation and dehydration of clay minerals,and fault sealing are the 4 main factors leading to the occurrence of overpressure.The overpressure fractures are small in scale,with an average length of 356.2μm and an average underground opening of 11.6μm.But they are densely developed,with an average surface density of 0.76 cm/cm2.Moreover,they are often accompanied by oil and gas charging,and thus high in effectiveness.Overpressure fractures were mainly formed during two periods of large-scale oil and gas charging,approximately 25-30 Ma ago and 0-5 Ma ago.Inter-salt overpressure fractures play dual roles as the storage space and migration paths of shale oil and gas.They contribute 22.3%to the porosity of shale reservoir and 51.4%to the permeability.They can connect fracture systems of multiple scales,greatly improving the quality of shale reservoir.During the development of shale oil and gas,inter-salt overpressure fractures can affect the extension and morphology of hydraulic fractures,giving rise to complex and highly permeable volumetric fracture networks,improving hydraulic fracturing effect and enhancing shale oil and gas productivity.
基金Natural Science Foudation of Shanxi Province of China(No.2013011017-8)
文摘The paper proposes four indicators to guide sensors layout in practical experiment on explosion overpressure filed construction based on tomographic method with high reconstruction accuracy and the least sensors. First, genetic algorithm is adopted to conduct global search and sensor layout optimization method is selected to satisfy four indicators. Then, by means of Matlab, the variation of these four indicators with different sensor layouts and reconstruction accuracy are analyzed and discussed. The results indicate that the sensor layout method proposed by this paper can reconstruct explosion overpressure field at the highest precision by a minimum number of sensors. It will guide actual explosion experiments in a cost-effective way.
基金partially sponsored by Foundation of PLA Rocket Force
文摘The waveform of the explosion shock wave under free-field air explosion is an extremely complex problem.It is generally considered that the waveform consists of overpressure peak,positive pressure zone and negative pressure zone.Most of current practice usually considers only the positive pressure.Many empirical relations are available to predict overpressure peak,the positive pressure action time and pressure decay law.However,there are few models that can predict the whole waveform.The whole process of explosion shock wave overpressure,which was expressed as the product of the three factor functions of peak,attenuation and oscillation,was proposed in the present work.According to the principle of explosion similarity,the scaled parameters were introduced and the empirical formula was absorbed to form a mathematical model of shock wave overpressure.Parametric numerical simulations of free-field air explosions were conducted.By experimental verification of the AUTODYN numerical method and comparing the analytical and simulated curves,the model is proved to be accurate to calculate the shock wave overpressure under free-field air explosion.In addition,through the model the shock wave overpressure at different time and distance can be displayed in three dimensions.The model makes the time needed for theoretical calculation much less than that for numerical simulation.
基金This work was supported by the Ghana National Petroleum Corporation(GNPC)through the GNPC Professorial Chair in Mining Engineering at the University of Mines and Technology(UMaT),GhanaThe authors thank the Ghana National Petroleum Corporation(GNPC)for providing funding to support this work through the GNPC Professorial Chair in Mining Engineering at the University of Mines and Technology(UMaT),Ghana.
文摘Blasting is the live wire of mining and its operations,with air overpressure(AOp)recognised as an end product of blasting.AOp is known to be one of the most important environmental hazards of mining.Further research in this area of mining is required to help improve on safety of the working environment.Review of previous studies has shown that many empirical and artificial intelligence(AI)methods have been proposed as a forecasting model.As an alternative to the previous methods,this study proposes a new class of advanced artificial neural network known as brain inspired emotional neural network(BIENN)to predict AOp.The proposed BI-ENN approach is compared with two classical AOp predictors(generalised predictor and McKenzie formula)and three established AI methods of backpropagation neural network(BPNN),group method of data handling(GMDH),and support vector machine(SVM).From the analysis of the results,BI-ENN is the best by achieving the least RMSE,MAPE,NRMSE and highest R,VAF and PI values of 1.0941,0.8339%,0.1243%,0.8249,68.0512%and 1.2367 respectively and thus can be used for monitoring and controlling AOp.
基金supported by the National Natural Science Foundation of China(Grant No.40172051)the Foundation for University Key Teachers by the Ministry of Education of China(No.GG-70-0491-1460)conducted as part of a study on petroleam system in the Damintun depression in 1997-1998 by the Department of Petroleum Geology,China University of Geosciences,which was supported by a grant from the Bureau of Liaohe Petroleam Exploration,CNPC.
文摘The Damintun depression is one of the four depressions in the Liaohe basin in northern China, and is a rift basin developed in the Paleogene. This paper discusses in detail the characteristics of pressure and fluid potential of the Damintun depression based on a synthesis of the data from boreholes, well tests and seismic surveys. Data from sonic logs, well tests and seismic velocity measurements are used to study the pressure characteristics of the areas. From the sonic log data, shales can be characterized as normally pressured, slightly overpressured or highly overpressured; from the well test data, the pressure-depth gradient in oil-producing intervals implies hydrostatic pressure in general. Most seismic profiles in the Damintun depression are of sufficiently high quality for seismic velocities to be measured. The fluid pressures, excess pressures and pressure coefficients in 47 representative seismic profiles are predicted using formula calculation methods, and further transformed to fluid potenti
基金the National Natural Science Foundation(Grant No.41502129)the Important National Science & Technology Specific Projects(grant No.2016ZX05006-003)the Fundamental Research Funds for the Central Universities(grant No.14CX05015A)
文摘The distribution and genetic mechanisms of abnormal pressures in the Bohai Bay Basin were systematically analyzed. Abnormal pressures are widely developed in the Bohai Bay Basin, primarily in the Paleogene E2s4, E2s3, Es1, and Ed formations. From the onshore area of the Bohai Bay Basin to the center of the Bozhong area, the top depth of the overpressured zone in each depression increases gradually, the overpressured strata in each depression gradually move to younger formations, and the pressure structure successively alters from single-bottom- overpressure to double-bottom-overpressure and finally to double-top-overpressure. The distribution of overpressured area is consistent with the sedimentary migration controlled by the tectonic evolution of the Bohai Bay Basin, which is closely related to the hydrocarbon-generation capability of active source rocks. The overpressured strata are consistent with the source-rock intervals in each depression; the top of the overpressured zone is synchronous with the hydrocarbon generation threshold in each depression; the hydrocarbon generation capability is positively correlated with the overpressure magnitude in each formation. Undercompaction was the main mechanism of overpressure for depressions with fluid pressure coefficients less than 1.2, whereas hydrocarbon generation was the main mechanism for depressions with fluid pressure coefficients greater than 1.5.
文摘AutoReaGas was used for the simulations of premixed gas/air mixtures explosion characteristics in obstacle-filled tubes with a cross-section of 0.2 m×0.2 m and the length of 28 m. Numerical analyses provide a quantitative description of dependence of flame propagation speed and explosion overpressure on obstacles number, blockage ratio and interval distance. Computational results indicate that the obstacles play a significant role in determining the flame transmission speed and explosion overpressure in gas explosions. With the increase of blockage ratio, the explosion overpressure gradually rises. Nevertheless, the flame speed does not always increase along with increasing blockage ratio, but subsequently begins to decrease as the blockage ratio increases to some extend. Also, the interval distance between obstacles strongly influences flame behavior and explosion overpressure. When the obstacle interval distance is equal to inner diameter of the tube, the average flame speed in the obstacle zone and the peak overpressure in tube all reach maximum values.
基金The authors would like to acknowledge the China Postdoctoral Science Foundation(Grant No.2019M660488)to provide fund for this work.
文摘Shockwaves from fuel-air explosive(FAE)cloud explosions may cause significant casualties.The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves.In this paper,a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction.The model is verified with the experimental data of a fourfoldsource FAE explosion,with the total fuel mass of 340 kg.Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source.In the case of multisources,the overpressure fields are influenced significantly by source scattering distance and source number.Subsequently,damage ranges of overpressure under three different levels are calculated.Within a suitable source scattering distance,the damage range of multi-sources situation is greater than that of the single-source,under the same amount of total fuel mass.This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.
基金supported by the Trans-century Training Programme Foundation for the Talents by the State Education Commission(now the Ministry of Education)of Chinathe key project No.01038 of the Ministry of Education of China
文摘Overpressure systems are widely developed in the central depression and paleo-uplift in the Yinggehai and Qiongdongnan basins. They can be divided into three types according to the origin of abnormally high formation pressure in the reservoirs, i.e. the autochthonous, vertically-transmitted and laterally-transmitted types. The autochthonous overpressure system results from rapid disequilibrium sediment loading and compaction. In the allochthonous overpressure system, the increase of fluid pressure in sandstone originates from the invasion of overpressured fluid flowing vertically or laterally through the conduit units. The autochthonous overpressure system occurs in the deep-lying strata of Neogene age in the central depression of the Yinggehai and Qiongdongnan basins. The vertically transmitted overpressure system is developed in the shallow strata of Late Miocene and Pliocene ages in the diapiric zone of the central Yinggehai basin, and the laterally transmitted overpressure system occurs in the Oligocene strata of paleo-uplifts, such as the structure of Ya-211 in the Qiongdongnan basin. The results indicate that the autochthonous overpressure system is generally a closed one, which is unfavorable for the migration and accumulation of hydrocarbons. In the allochthonous overpressure system, hydrocarbon accumulation depends on the relationship between the formation of overpressure systems and the spatial location and duration of hydrocarbon migration. The interval overlying the overpressure system is usually a favorable hydrocarbon accumulation zone if the duration of fluid expulsion coincides with that of hydrocarbon accumulation.
基金supported by National Natural Science Founda-tion of China,grant number U1730112.
文摘Ballistic impact and sealed chamber tests were performed on the steel-encased reactive material projectile(SERMP)to understand its behind-plate overpressure effect when impacting the thin aluminum plates.The reactive material encased with a 1.5 mm thick 30CrMnSiNi2A steel shell was launched onto the initially sealed test chamber with a 3 mm thick 2024-T3 thin aluminum cover plate.Moreover,the overpressure signals in the test chamber were recorded by pressure sensors.The experimental results indicate an unusual behind-plate overpressure effect:as the density of the projectile increases from 6.43 g/cm^(3) to 7.58 g/cm^(3) by increasing the content of tungsten powder,although its total chemical energy decreases,it produces a higher behind-target overpressure at a lower impact velocity.A theoretical model is proposed to predict the reaction length of reactive material inside the projectile based on one-dimensional shock wave theory to understand this unexpected result.In addition,the deviation between the actual energy release and the theoretical calculation results,also the variation of overpressure rise time are analyzed and discussed.As the analyses show,when the SERMP successfully penetrates the cover plate,an increasing density of the reactive material inside the projectile always means that the delaying rarefaction wave effect,an increase of its internal pressure and strain rate levels.These factors lead to the increase of the overpressure limit velocity and reaction extent of the reactive material,while the overpressure rise time decreases.
基金This research was supported by the National Natural Science Foundation of China(grants 401 25008 and 40238059).
文摘The Yinggehai Basin is a strongly overpressured Cenozoic basin developed in the northern continental shelf of the South China Sea. The flow of overpressured fluids in this basin has given rise to strong effects on petroleum accumulation. (1) The overpressured fluid flow has enhanced the maturation of shallow-buried source rocks, which has caused the source rocks that would have remained immature under the conduction background to be mature for hydrocarbon generation. As a result, the overpressured fluid flow has increased the volume and interval of mature source rocks. (2) The overpressured fluid flow has strong extraction effects on the immature or low-mature source rocks in the shallow parts. This has increased, to some extent, the expulsion efficiency of the source rocks. More importantly, the extraction effects have strongly limited the effectiveness of biomarker parameters from oil and condensate in reflecting the source and maturity of the oil and gas. (3) The flow has caused the sandstones in the shallow parts to get into the late diagenesis stage, and significantly reduced the porosity and permeability of the sandstones. This study confirms that even in sedimentary basins in which no topography-driven groundwater flow systems have ever developed, the cross-formation migration of overpressured fluids and the resultant energy conduction and material exchange can significantly affect the thermal regime, source rock maturation and sandstone diagenesis. As a result, the effects of overpressured fluid flow must be taken into account in analyzing the mechanism of petroleum accumulation.
基金Supported by the National Natural Science Foundation of China(50874005)Anhui Province College Young Teachers Scientific Research"Allotment Planning"Key Project(2009SQRZ067)
文摘Through analyzing experimental data of gas explosions in excavation roadwaysand the forecast models of the literature, Found that there is no direct proportional linearcorrelation between overpressure and the square root of the accumulated volume of gas,the square root of the propagation distance multiplicative inverse.Also, attenuation speedof the forecast model calculation is faster than that of experimental data.Based on theoriginal forecast models and experimental data, deduced the relation of factors by introducinga correlation coefficient with concrete volume and distance, which had been verifiedby the roadway experiment data.The results show that it is closer to the roadway experimentaldata and the overpressure amount increases first then decreases with thepropagation distance.
基金Project supported by the National Basic Research Program from Ministry of Science and Technology,China(Grant No.2011CB707900)the National Natural Science Foundation of China(Grant Nos.81271589,81227004,11174141,11374155,11612032,and 81301616)the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BE2011110 and BK20131017)
文摘Sub-harmonic component generated from microbubbles is proven to be potentially used in noninvasive blood pressure measurement. Both theoretical and experimental studies are performed in the present work to investigate the dependence of the sub-harmonic generation on the overpressure with different excitation pressure amplitudes and pulse lengths. With 4-MHz ultrasound excitation at an applied acoustic pressure amplitude of 0.24 MPa, the measured sub-harmonic amplitude exhibits a decreasing change as overpressure increases; while non-monotonic change is observed for the applied acoustic pressures of 0.36 MPa and 0.48 MPa, and the peak position in the curve of the sub-harmonic response versus the overpres- sure shifts toward higher overpressure as the excitation pressure amplitude increases. Furthermore, the exciting pulse with long duration could lead to a better sensitivity of the sub-harmonic response to overpressure. The measured results are ex- plained by the numerical simulations based on the Marmottant model. The numerical simulations qualitatively accord with the measured results. This work might provide a preliminary proof for the optimization of the noninvasive blood pressure measurement through using sub-harmonic generation from microbubbles.