Toward understanding the microstructure characteristics,phase selection and magnetic properties of laser additive manufactured Nd-Fe-B permanent magnets

Nd-Fe-B permanent magnets play a crucial role in energy conversion and electronic devices.The essential magnetic properties of Nd-Fe-B magnets,particularly coercivity and remanent magnetization,are significantly infuenced by the phase characteristics and microstructure.In this work,Nd-Fe-B magnets were manufactured using vacuum induction melting(VIM),laser directed energy deposition(LDED)and laser powder bed fusion(LPBF)technologies.Themicrostructure evolution and phase selection of Nd-Fe-B magnets were then clarified in detail.The results indicated that the solidification velocity(V)and cooling rate(R)are key factors in the phase selection.In terms of the VIM-casting Nd-Fe-B magnet,a large volume fraction of theα-Fe soft magnetic phase(39.7 vol.%)and Nd2Fe17Bxmetastable phase(34.7 vol.%)areformed due to the low R(2.3×10-1?C s-1),whereas only a minor fraction of the Nd2Fe14B hard magnetic phase(5.15 vol.%)is presented.For the LDED-processed Nd-Fe-B deposit,although the Nd2Fe14B hard magnetic phase also had a low value(3.4 vol.%)as the values of V(<10-2m s-1)and R(5.06×103?C s-1)increased,part of theα-Fe soft magnetic phase(31.7vol.%)is suppressed,and a higher volume of Nd2Fe17Bxmetastable phases(47.5 vol.%)areformed.As a result,both the VIM-casting and LDED-processed Nd-Fe-B deposits exhibited poor magnetic properties.In contrast,employing the high values of V(>10-2m s-1)and R(1.45×106?C s-1)in the LPBF process resulted in the substantial formation of the Nd2Fe14B hard magnetic phase(55.8 vol.%)directly from the liquid,while theα-Fe soft magnetic phase and Nd2Fe17Bxmetastable phase precipitation are suppressed in the LPBF-processed Nd-Fe-B magnet.Additionally,crystallographic texture analysis reveals that the LPBF-processedNd-Fe-B magnets exhibit isotropic magnetic characteristics.Consequently,the LPBF-processed Nd-Fe-B deposit,exhibiting a coercivity of 656 k A m-1,remanence of 0.79 T and maximum energy product of 71.5 k J m-3,achieved an acceptable magnetic performance,comparable to other additive manufacturing processed Nd-Fe-B magnets from MQP(Nd-lean)Nd-Fe-Bpowder.

Disturbances rejection optimization based on improved two-degree-of-freedom LADRC for permanent magnet synchronous motor systems

Permanent magnet synchronous motor(PMSM)speed control systems with conventional linear active disturbance rejection control(CLADRC)strategy encounter issues regarding the coupling between dynamic response and disturbance suppression and have poor performance in suppressing complex nonlinear disturbances.In order to address these issues,this paper proposes an improved two-degree-of-freedom LADRC(TDOF-LADRC)strategy,which can enhance the disturbance rejection performance of the system while decoupling entirely the system's dynamic and anti-disturbance performance to boost the system robustness and simplify controller parameter tuning.PMSM models that consider total disturbances are developed to design the TDOF-LADRC speed controller accurately.Moreover,to evaluate the control performance of the TDOF-LADRC strategy,its stability is proven,and the influence of each controller parameter on the system control performance is analyzed.Based on it,a comparison is made between the disturbance observation ability and anti-disturbance performance of TDOF-LADRC and CLADRC to prove the superiority of TDOF-LADRC in rejecting disturbances.Finally,experiments are performed on a 750 W PMSM experimental platform,and the results demonstrate that the proposed TDOF-LADRC exhibits the properties of two degrees of freedom and improves the disturbance rejection performance of the PMSM system.

Current knowledge for the risk factors of early permanent pacemaker implantation following transcatheter aortic valve replacement and what is next for the primary prevention?

In this editorial,we comprehensively summarized the preoperative risk factors of early permanent pacemaker implantation after transcatheter aortic valve replacement(TAVR)among patients with severe aortic stenosis from several renowned clinical studies and focused on the primary prevention of managing the modifiable factors,e.g.,paroxysmal atrial fibrillation before the TAVR.

Research progress of permanent ferrite magnet materials

Permanent ferrite magnet materials are extensively employed due to their exceptional magnetic properties and cost-effectiveness.The fast development in electromobile and household appliance industries contributes to a new progress in permanent ferrite materials.This paper reviews the deveolpement and progress of permanent ferrite magnet industry in recent years.The emergence of new raw material,the advancement of perparation methods and manufacturing techniques,and the potential applications of permanent ferrite materials are introduced and discussed.Specifically,nanocrystallization plays a crucial role in achieving high performance at a low cost and reducing reliance on rare earth resources,and therefore it could be a promising development trendency.

Effect of antioxidants on the efficiency of jet milling and the powder characteristics of Sm2Co17 permanent magnets

This study investigated the effect of antioxidants on the grinding efficiency,magnetic powder characteristics,microstructure,and magnetic properties of 2:17 type SmCo permanent magnet materials.The results show that adding antioxidants helps improve the dispersion among magnetic powders,leading to a 33.3%decrease in jet milling time and a 15.8%increase in magnet powder production yield.Additionally,adding antioxidants enhances the oxidation resistance of the magnetic powders.After being stored in a constant temperature air environment at 25C for 48 h,the O content in the powder decreased by 33%compared to samples without antioxidants.While in the magnet body,the O content decreased from 0.21 wt.%to 0.14 wt.%,which helps increase the effective Sm content and domain wall pinning uniformity in the magnet.Excellent magnetic properties were obtained in the magnet with added antioxidants:B_(r)=11.6 kGs,SF=79.6%,H_(cj)=16.8 kOe,and(BH)_(max)=32.5 MGOe.

Improved Particle Swarm Optimization for Parameter Identification of Permanent Magnet Synchronous Motor

In the process of identifying parameters for a permanent magnet synchronous motor,the particle swarm optimization method is prone to being stuck in local optima in the later stages of iteration,resulting in low parameter accuracy.This work proposes a fuzzy particle swarm optimization approach based on the transformation function and the filled function.This approach addresses the topic of particle swarmoptimization in parameter identification from two perspectives.Firstly,the algorithm uses a transformation function to change the form of the fitness function without changing the position of the extreme point of the fitness function,making the extreme point of the fitness function more prominent and improving the algorithm’s search ability while reducing the algorithm’s computational burden.Secondly,on the basis of themulti-loop fuzzy control systembased onmultiplemembership functions,it is merged with the filled function to improve the algorithm’s capacity to skip out of the local optimal solution.This approach can be used to identify the parameters of permanent magnet synchronous motors by sampling only the stator current,voltage,and speed data.The simulation results show that the method can effectively identify the electrical parameters of a permanent magnet synchronous motor,and it has superior global convergence performance and robustness.

Review of Field Weakening Control Strategies of Permanent Magnet Synchronous Motors

Due to high power density,high efficiency,and accurate control performance,permanent magnet synchronous motors(PMSMs)have been widely adopted in equipment manufacturing and energy transformation fields.To expand the speed range under finite DC-bus voltage,extensive research on field weakening(FW)control strategies has been conducted.This paper summarizes the major FW control strategies of PMSMs,which are categorized into calculation-based methods,voltage closed-loop control methods,and model predictive control related methods.The existing strategies are analyzed and compared according to performance,robustness,and execution difficulty,which can facilitate the implementation of FW control.

Optimal design of modular dual-field modulated permanent magnet linear motors with thrust characteristics

To reduce thrust ripple and cost and improve the average thrust of permanent magnet linear motors,a modular dual-field modulation permanent magnet linear motor was studied,and the parameters were optimized.First,sensitive parameters were selected using the Taguchi method,and then the optimal variables were sampled using the optimal Latin hypercube experimental design method and an ensemble of surrogates model of optimization objectives,and its accuracy was verified.Next,a multi-objective particle swarm optimization algorithm was used to optimize the purpose of“maximum average thrust and minimum thrust ripple”,and the Pareto front of average thrust and thrust ripple was obtained.Finite element analysis showed that the optimized modular dual flux-modulation permanent magnet linear motor(MDFMPMLM)had a 29.5%reduction in thrust ripple and a 5%increase in average thrust compared to the original motor.This study provided an effective method for improving the performance of permanent magnet linear motors.

Risk of permanent pacemaker implantation following transcatheter aortic valve replacement:Which factors are most relevant?

Transcatheter aortic valve replacement(TAVR)has emerged as a formidable treatment option for severe symptomatic aortic stenosis ahead of surgical aortic valve replacement.The encouraging results from large randomized controlled trials has resulted in an exponential rise in the use of TAVR even in the low-risk patients.However,this is not without challenges.Need for permanent pacemaker(PPM)post-TAVR remains the most frequent and clinically relevant challenge.Naturally,identifying risk factors which predispose an individual to develop high grade conduction block post-TAVR is important.Various demographic factors,electrocardiographic features,anatomic factors and procedural characteristics have all been linked to the development of advanced conduction block and need for PPM following TAVR.Amongst these electrophysiological variables,most notably a prolonged QRS>120 ms regardless of the type of conduction block seems to be one of the strongest predictors on logistic regression models.The index study by Nwaedozie et al highlights that patients requiring PPM post-TAVR had higher odds of having a baseline QRS>120 ms and were more likely to be having diabetes mellitus that those who did not require PPM.

Parental Knowledge of Pre-Hospital Management of Avulsed Permanent Tooth in Children at Kath

BACKGROUND: Permanent tooth avulsion is one of the severe forms of dental traumatic injuries. The immediate action taken at the site of the accident is crucial to the prognosis of the tooth. Replantation is considered as the treatment of choice. OBJECTIVE: The study was undertaken to assess the knowledge of parents who accompany their children to the pediatric dental clinic, KATH on the pre-hospital management of avulsed permanent tooth in children. METHODS: A researcher administered structured questionnaire was used to collect data on the knowledge of pre-hospital management of avulsed permanent tooth from 83 parents who accompanied their wards to the pediatric dental clinic at KATH. RESULTS: A total of 83 parents were involved in the study. 30 (36%) were males while 53 (64%) were females. The majority of the parents (57%) were either university trained or had attended college of education. Only 32 parents (39%) were aware of the possibility of replantation. Majority of the parents chose non-physiologic media as the transport media of choice and only 10% would attempt self-replantation before seeking professional help. 76 parents (92%) had no previous education on pre-hospital management of avulsed tooth. CONCLUSION: The results obtained from this study indicate that parental knowledge on pre-hospital management of avulsed permanent tooth is low hence the need for massive public educational campaigns.

Effect of Brisk Walking on Self-Care Agency or Care Dependency among Colorectal Cancer Patients with Permanent Stoma

Objective:The purpose of this study was to determine the effectiveness of brisk walking as an intervention for self-care agency and care dependency in patients with permanent colorectal cancer stoma.Method:This study adopted a quasi-experimental research design,specifically a non-equivalent control group pre-test and post-test design.Utilizing the Exercise of Self-Care Agency Scale(ESCA)and Care Dependency Scale(CDS),a survey was administered to 64 patients from a hospital in Shandong Province.The statistical methods used for analyzing data included frequency,mean,standard deviation(SD),independent t-test,P-value calculation,and dependent t-test.Result:After two months of a brisk walking exercise program,participants in the experimental group had a higher level of self-care agency than before the experiment(P<0.05),and their level of care dependency was significantly reduced(P<0.05).Participants in the control group also showed higher levels of self-care agency(P<0.05)and lower levels of care dependency(P<0.05)after two months compared to their levels before the two months.Conclusion:The brisk walking program had a positive impact on patients’self-care agency and reduced their care dependency.

Study on the Effect of Magnetic Pole Clipping Angle on the Eddy Current Loss of Permanent Magnets in the Rotor of Magnetically Levitated Permanent Magnet Synchronous High-Speed Electric Spindles

Aiming at the problem of high temperature and even demagnetization failure of permanent magnet (PM) due to PM eddy current loss in PM synchronous high-speed motors, this paper proposes a technique to lessen PM eddy current loss by cutting the angle of PM poles to change the shape of PM structure. Firstly, an analysis is conducted on the mechanism of PM synchronous high-speed motor eddy current loss production, the theoretical analytical model of PM eddy current loss is deduced, and it is theoretically proved that the magnetic pole shaving angle can reduce PM eddy current loss. Then, a 25 KW surface-type PM synchronous high-speed motor as an object, using two-dimensional time-step finite element method (FEM) to model and analyze PM eddy current loss. The results show that the smaller the PM pole shaving angle, the less its eddy current loss will be, it is possible to minimize the pole shaving angle of eddy current loss by 9.8% compared to the unshaved angle. Finally, the temperature field of the PM is calculated using a finite element method, and the outcomes demonstrate that the maximum temperature of the PM with a magnetic pole shaving angle can be reduced by about 5% compared with the unshaved angle.

Cogging Torque Reduction in Axial Flux PMSM with Different Permanent Magnet Combination

With the increasing requirement for the mechanical vibration and acoustic noise of the permanent magnet synchronous motor(PMSM)drive system,the demand for cogging torque reduction of PMSM has been considerably increased.To solve the problem of oversized cogging torque of axial flux PMSM,a rotor topology with hybrid permanent magnet is proposed to weaken the cogging torque.Firstly,the expression of the cogging torque of the axial flux motor is derived,and the influence of the pole-arc ratio of the permanent magnet on the cogging torque is analyzed.Secondly,the rotor structure with hybrid permanent magnet is adopted to reduce the cogging torque.According to the analytical analysis,the constraints of the size and pole-arc ratio between the hybrid permanent magnets are obtained,and the two permanent magnets related to the minimum cogging torque are determined.And the analysis results are verified by the finite element simulation.Furthermore,the motor performance with and without the hybrid permanent magnet is compared with each other.Finally,the cogging torque is significantly reduced by adopting a rotor structure with hybrid permanent magnets.

Transient characteristics analysis of linear flux-switching permanent magnet machines for precision control

A dynamical dq model is proposed for a linear flux-switching permanent magnet（LFSPM） machine which is suitable for high-precision control applications.The operation principle of the prototype machine is analyzed using the finite element method（FEM）,and the parameters,such as the back electromotive force（EMF） and the phase flux linkage,are calculated.The calculated and measured results reveal that the back EMF and the flux linkage are essentially sinusoidal,and the variation of the phase flux linkage profile of the LFSPM machine is similar to that of the linear surface permanent magnet（LSPM） machine.Based on this,a dynamical dq model and a simulation control model are proposed.The simulation results are compared with the test results obtained from a DSP-based control platform,which verifies that the model is correct and effective.Moreover,the model can be used for design optimization and control development.

Static characteristics of a novel flux-switching permanent magnet linear motor

A novel flux-switching permanent magnet linear motor（FSPMLM） is proposed for linear direct driving machine tools.First,the two-and three-dimensional topological configuration of the proposed motor is presented;the basic operational principle of the FSPMLM is introduced;and the magnetic fields at the two typical conditions of no-load are analyzed.Secondly,the FSPMLM is analyzed by the two-dimensional finite element method（FEM） to investigate the static electromagnetic characteristics such as flux-linkage,back EMF（electromotive force） and inductance performances.The cogging forces of two kinds of FSPMLMs with different shaped cores are analyzed and compared,and the results show that the cogging force is significantly reduced by using the E-shaped cores.Additionally,based on the co-energy method,the thrust equation is derived and verified by the simulation results obtained by the FEM.Finally,an experimental prototype is used to test the characteristics under open circuit and load conditions.The simulation and experimental results indicate that the proposed motor has advantages of a sinusoidal back-EMF waveform,a small cogging effect and a high thrust density,and it is suitable for the application of linear direct driving machine tools.

THREE-PHASE BRIDGE INVERTER FOR 9kW DOUBLY SALIENT PERMANENT MAGNET MOTOR

The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.

Optimization Design and Analysis of a Hybrid Permanent Magnet Flux-Switching Motor with Compound Rotor Configuration

This paper proposes a type of flux-switching permanent magnet(FSPM)motor,where the design concept of the hybrid permanent magnets(HPM)and the compound rotor are incorporated into the motor design.In such design,the proposed motor can not only realize the significant reduction of NdFeB volume,but also artfully convert external magnetic flux leakage into the air-gap field to achieve competitive torque density and desirable PM usage efficiency.For extensive investigation,two topologies of the HPM are designed and analyzed for the proposed motor,which consist of the parallel-magnetic-hybrid(PMH)mode and serial-magnetic-hybrid(SMH)mode.To fully exploit the potential advantages of the proposed motor,a multi-objective optimization design is conducted,where the response surface method(RSM)and sequential non-linear programming(SNP)method are purposely utilized.After optimization,the electromagnetic performances of the motor with PMH mode and SMH mode are evaluated and compared by using finite element method(FEM),which include the back-EMF,cogging torque,output torque,and so on.Furthermore,the partial demagnetization of the ferrite PM is also investigated in the paper.Finally,the theoretical analysis and simulation study verify the effectiveness of the proposed motor and corresponding optimization design.

Analysis and Modeling of Tooth-Tip Leakage Fluxes in a Radial-Flux Dual-Stator Machine with Diametrically Magnetized Cylindrical Permanent Magnets

Tooth-tip Leakage flux(TLF)has a major effect on the prediction of air-gap flux distribution and electromagnetic torque in the permanent magnet(PM)machines.Therefore,deriving a model for TLF is necessary for machine design and optimization.Accurate modeling of TLF can lead to fast and precise solutions,which ease the analysis of electromagnetic devices.It also provides the opportunity to increase torque density by more efficient utilization of PM’s volume and prevent saturation in machine optimization.This paper presents a method for modeling and analyzing TLFs in a radial-flux dual-stator permanent magnet(DSPM)machine with diametrically magnetized cylindrical permanent magnets(DMCPM)in series and parallel magnetic circuit structures.In this model,some expressions in terms of machine dimensions are derived for the TLF analysis.Finite element method(FEM)is applied to validate the proposed model.Results indicate that the maximum error between the proposed model and FEM is insignificant(less than 6%).Finally,by a prototyped machine the validity of the proposed model was investigated with the experimental tests.

Permanent versus disconnectable FPSOs

Floating production storage and offioading （FPSO） vessels offer a cost-effective field development solution, especially in deepwater areas lacking an adequate pipeline network. Most FPSOs are permanently moored, i.e. the complete system is designed to withstand any kind of extreme environment at the field location. FPSOs that can be quickly disconnected from their moorings and risers have also been designed and deployed. The key feature of this type of disconnectable FPSO is that it can be disconnect and so avoid dangerous environmental conditions such as icebergs, hurricanes in the Gulf of Mexico and typhoons in the South China Sea. In this paper, the concept of disconnectable FPSOs for deepwater field development is presented. Key technologies and their engineering analyses are highlighted. The merits and demerits of disconnectable vs permanent FPSOs are then evaluated. The paper concludes that both permanent and disconnectable FPSOs are versatile floating systems and their selection depends on safety, technological, cost and operational considerations.

Properties of Brushless DC Machine Induced by Permanent Magnets Applied to a Traction Drive

The paper presents a mathematical model ofbrushless DC machine induced by permanent magnets. Its construction uses the classical model of permanent magnet synchronous machine and induced model of power inverter using the serraphil form. The results of the computer simulation were presented for such states： startup, work under active constant load and the behavior of the machine in terms of exponential and stepping change of the power inverter＇s control angle.