Ultrafiltration membranes were prepared using phenolphthalein polyarylethersulfone (PES-C),polyethersulfone (PES) and poly(phthalazinone ether sulfone ketone) (PPESK) as polymers and NMP,DMAc,DMF and DMSO as solvents ...Ultrafiltration membranes were prepared using phenolphthalein polyarylethersulfone (PES-C),polyethersulfone (PES) and poly(phthalazinone ether sulfone ketone) (PPESK) as polymers and NMP,DMAc,DMF and DMSO as solvents by immersion precipitation via phase inversion.Experimental data of thermodynamic properties of the polymer solutions and kinetic process of membrane formation were reported.For polymer solutions with good solvents,the sequence of the viscous flow activation energy (E_η) was coincident with tha...展开更多
A toughener that can effectively improve the interlaminar toughness in carbon fiber composites is crucial for various applications.We investigated,the toughening effects of phenolphthalein-based cardo poly(ether sulfo...A toughener that can effectively improve the interlaminar toughness in carbon fiber composites is crucial for various applications.We investigated,the toughening effects of phenolphthalein-based cardo poly(ether sulfone)(PES-C)on E51/DETDA epoxy and its carbon fiber composites(CFCs).Scanning electron microscopy showed that the phase structures of PES-C/epoxy blends change from island(of dispersed phase)structures to bi-continuous structures(of the matrix)as the PES-C content increased,which is associated with reaction-induced phase separation.After adding 15 phr PES-C,the glass transition temperature(T_(g))of the blends increased by 51.5℃,and the flexural strength,impact strength and fracture toughness of the blends were improved by 41.1%,186.2%and 42.7%,respectively.These improvements could be attributed to the phase separation structure of the PES-C/epoxy sys-tem.A PES-C film was used to improve the mode-II fracture toughness(G_(IIC))of CFCs.The G_(IIC) value of the 7μm PES-C film toughened laminate was improved by 80.3%compared to that of the control laminate.The increase in G_(IIC) was attributed to cohesive failure and plastic deformation in the interleaving region.展开更多
基金supported by the Major State Basic Research Program of China (No.2009CB623404)National Natural Science Foundation of China (Nos.20736003,20676067)+1 种基金National High Technology Research and Development Program of China (No.2007AA06Z317)Foundation of Ministry of Education of China (No.20070003130).
文摘Ultrafiltration membranes were prepared using phenolphthalein polyarylethersulfone (PES-C),polyethersulfone (PES) and poly(phthalazinone ether sulfone ketone) (PPESK) as polymers and NMP,DMAc,DMF and DMSO as solvents by immersion precipitation via phase inversion.Experimental data of thermodynamic properties of the polymer solutions and kinetic process of membrane formation were reported.For polymer solutions with good solvents,the sequence of the viscous flow activation energy (E_η) was coincident with tha...
文摘A toughener that can effectively improve the interlaminar toughness in carbon fiber composites is crucial for various applications.We investigated,the toughening effects of phenolphthalein-based cardo poly(ether sulfone)(PES-C)on E51/DETDA epoxy and its carbon fiber composites(CFCs).Scanning electron microscopy showed that the phase structures of PES-C/epoxy blends change from island(of dispersed phase)structures to bi-continuous structures(of the matrix)as the PES-C content increased,which is associated with reaction-induced phase separation.After adding 15 phr PES-C,the glass transition temperature(T_(g))of the blends increased by 51.5℃,and the flexural strength,impact strength and fracture toughness of the blends were improved by 41.1%,186.2%and 42.7%,respectively.These improvements could be attributed to the phase separation structure of the PES-C/epoxy sys-tem.A PES-C film was used to improve the mode-II fracture toughness(G_(IIC))of CFCs.The G_(IIC) value of the 7μm PES-C film toughened laminate was improved by 80.3%compared to that of the control laminate.The increase in G_(IIC) was attributed to cohesive failure and plastic deformation in the interleaving region.
