Cross-linked polyelectrolyte reinforced SnO_(2)electron transport layer for robust flexible perovskite solar cells

SnO_(2)electron transport layer(ETL)is a vital component in perovskite solar cells(PSCs),due to its excellent photoelectric properties and facile fabrication process.In this study,we synthesized a water-soluble and adhesive polyelectrolyte with ethanolamine(EA)and poly-acrylic acid(PAA).The linear PAA was crosslinked by EA,forming a 3D network that stabilized the SnO_(2)nanoparticle dispersion.An organic–inorganic hybrid ETL is developed by introducing the cross-linked PAA-EA into SnO_(2)ETL,which prevents nano particle agglomeration and facilitates uniform SnO_(2)film formation with fewer defects.Additionally,the PAA-EA-modified SnO_(2)facilitated a uniform and compact perovskite film,enhancing the interface contact and carrier transport.Consequently,the PAA-EA-modified PSCs exhibited excellent PCE of 24.34%and 22.88%with high reproducibility for areas of 0.045 and 1.00 cm~2,respectively.Notably,owing to structure reinforce effect of PAA-EA in SnO_(2)ETL,flexible device demonstrated an impressive PCE of 23.34%while maintaining 90.1%of the initial PCE after 10,000 bending cycles with a bending radius of 5 mm.This successful approach of polyelectrolyte reinforced hybrid organic–inorganic ETL displays great potential for flexible,large-area PSCs application.

Au@Ag Core-shell Nanorods Self-assembled on Polyelectrolyte Multilayers for Ultra-High Sensitivity SERS Fiber Probes

We demonstrated a chemical process in the fabrication of a SERS fiber probe with an ultrahigh sensitivity.The synthesis was carried out by preparing Au@Ag core-shell nanorods (Au@Ag-NRs) selfassembled on polyelectrolyte (PE) multilayers,for which Au@Ag-NRs were controlled by adjusting the silver layer thickness.The effect of silver layer thickness of Au@Ag-NRs on the SERS performance of the fiber probe was investigated.The SERS fiber probe shows the best performance when the silver layer thickness is controlled at 8.57 nm.Under the condition of optimizing silver layer thickness,the fiber probe exhibits ultra-high sensitivity (i e,10^(-10) M crystalline violet,CV),good reproducibility (i e,RSD of 3.5%) and stability.Besides,electromagnetic field distribution of the SERS fiber probe was also investigated.The strongest enhancement is found within the core of fiber,whereas a weakened electromagnetic field exists in the fiber cladding layer.The SERS fiber probe can be a good candidate in ultra-trace detection for biomedical and environmental areas.

Tunable Self-assembled Weak Polyelectrolyte Brushes

The authors have investigated the pH and ionic strength response of self-assembled layers formed by adsorption of amphiphilic weak polyelectrolytes. Using the SFA （Surface Forces Apparatus） the authors measured force-distance profiles of poly （isoprene）-poly （acrylic acid） block copolymers adsorbed on mica. Also by Atomic Force Microscopy the authors captured single polyelectrolyte molecule adsorbed on a surface. The effect of salt concentration （Cs） and pH upon the height of the brush layers was explored mainly by measuring the forces between two adsorbed polyelectrolyte brushes. At pH = 4 our results are in good agreement with the scaling prediction L0 ∝Cs-1/3 Changing the pH from 4 to 10 causes a remarkable swelling of the polymer layer, but only a weak dependence on salt concentration was detected at the higher pH. This can be attributed to the degree of dissociation, which depends on the local pH value. At low pH the polyelectrolyte chains have a low charge density, while on increasing the pH the degree of dissociation rises, and the increased charge density is followed by swelling of the adsorbed layer. The local concentration of ions in the brush is now greater than that of pH = 4 and approximately equivalent to 0.3 M. So the swelling is only weakly dependent on salt concentration in the range 0.01-1.0 M. The results demonstrate the tunable nature of such self-assembled polyelectroiyte brushes whose height and range of interactions, can be systematically controlled by adjusting the pH and ionic strength of the medium.

Effect of poly(ethylene glycol) modified polyethylenimine polyelectrolyte complex on pharmaceutical characteristics and uptake on breast cancer cell

Cationic polyethylenimine （PEI） with dextran fluorescein anionic （DFA） or oligodeoxynucleotide （ODN） could form polyelectrolyte complex by self-assembly as a gene delivery vector. This study was designed to investigate the effects on pharmaceutical characteristics and cell uptake PEI after a long-circulation modification with poly（ethylene glycol） （PEG）. DFA or ODN reacted with PEI or PEI-PEG to form polyelectrolyte complexes. Surface characters of these complexes and the retardation of ODN by PEI and PEI-PEG were evaluated. The uptake rates of DFA/PEI and DFA/PEI-PEG complexes by MCF-7 cells were evaluated by flow cytometry. Confocal laser scanning microscopy was utilized to visualize the internalization of these complexes. ODN/PEI complex showed the dependence of their size and ξ potential on the N/P ratio. ODN/PEI-PEG complex were much less affected by N/P ratio and their size was around 30 100 nm. PEI and PEI-PEG retarded ODN even at N/P ratio as low as 4, and complete retardation was found at N/P ratio of 8. The uptake rate by MCF-7 cells was direct correlated to the DFA concentration and incubation time, and the uptake rate could exceed 99% under the selected condition. The results in this study showed that PEI self-assembly polyelectrolyte complex after stealth or long circulation modification may increase the ability as a gene vector to delivery genes into cells.

Molecular Dynamics Simulation for the Effect of Chain Length of Spacer and Tail of Cationic Gemini Surfactant on the Complex with Anionic Polyelectrolyte

Interaction of anionic polyelectrolyte with cationic gemini surfactant has been investigated by coarse-grained molecular dynamics simulation.Polyelectrolyte facilitates the oppositely charged ionic surfactants to aggregate by suppressing the electrostatic repulsion between ionic head groups leading to the formation of micellar complex.With addition of surfactant,the conformation of polyion chain changes from stretched to random coiled to spherical,and at the same time more free micelles are formed by surfactants in mixtures.Increasing the length of spacer or tail chain in gemini surfactant will weaken its interaction with polyelectrolyte and simultaneously strengthen its tendency to self-assemble.The simulation results are consistent with experimental observations and reveal that the electrostatic interaction plays an important role in the interaction of polyelectrolyte with gemini sur- factant.

Gradient nanoporous phenolics as substrates for high-flux nanofiltration membranes by layer-by-layer assembly of polyelectrolytes

Thin film composite(TFC) membranes represent a highly promising platform for efficient nanofiltration(NF)processes. However, the improvement in permeance is impeded by the substrates with low permeances. Herein,highly permeable gradient phenolic membranes with tight selectivity are used as substrates to prepare TFC membranes with high permeances by the layer-by-layer assembly method. The negatively charged phenolic substrates are alternately assembled with polycation polyethylenimine(PEI) and polyanion poly(acrylic acid)(PAA)as a result of electrostatic interactions, forming thin and compact PEI/PAA layers tightly attached to the substrate surface. Benefiting from the high permeances and tight surface pores of the gradient nanoporous structures of the substrates, the produced PEI/PAA membranes exhibit a permeance up to 506 L? m-2?h-1?MPa-1, which is ~2–10 times higher than that of other membranes with similar rejections. The PEI/PAA membranes are capable of retaining N 96.1% of negatively charged dyes following the mechanism of electrostatic repulsion. We demonstrate that the membranes can also separate positively and neutrally charged dyes from water via other mechanisms.This work opens a new avenue for the design and preparation of high-flux NF membranes, which is also applicable to enhance the permeance of other TFC membranes.

Repeated-batch Cultivation of Encapsulated Monascus purpureus by Polyelectrolyte Complex for Natural Pigment Production

In general,productions of natural pigment in submerged microorganism culture were much less than that in solid-state fermentation,because the solid-state culture can provide a support carrier for the mycelium. To improve natural pigment production,the cultivation of Monascus purpureus in submerged encapsulated cell was investigated. Monascus purpureus immobilized in polyelectrolyte complex(PEC) microcapsules,which were pre-pared by sodium cellulose sulphate(NaCS) and poly-dimethyl-diallyl-ammonium chloride(PDMDAAC),was a good substitute for submerged cell culture because it mimicked the solid-state environment. The repeated-batch process with encapsulated cells was studied in flasks and a bubble column. The results indicated that the bubble column was more suitable for the encapsulation culture than the shaking flasks because of its good mass transfer performance and minor shear stress on cells. Owing to the protection of the microcapsule's membrane,Monascus purpureus in microcapsules increased approximately three times over that in free cell culture with negligible cell leakage to the medium. The pigment production in the bubble column finally reached 3.82(OD500) ,which was two times higher than in free cell culture. In addition,the duration of each batch was shortened to 15% of that in free cell culture.

Preparation of Gold Nanoparticles Protected with Polyelectrolyte

Gold nanoparticles were synthesized through the reduction of tetrachlorauric acid (HAuCl4) by NaBH4, with polyethyleneimine(PEI) as stabilizer. The nanoparticles were characterized by UV-vis spectroscopy and atomic force microscopy(AFM).

TiO2-incorporated polyelectrolyte composite membrane with transformable hydrophilicity/hydrophobicity for nanofiltration separation

The wettability of the membrane surface has shown obvious influent on the separation performance of the membrane.In this work,a hydrophilic PDA-[PDDA/TiO2]+Cl-membrane was prepared by a one-step codeposition of poly(diallyldimethylammonium chloride)(PDDA)polyelectrolyte solution containing positively charged TiO2@PDDA nanoparticles with the assistance of dopamine(DA).Such positively charged membrane can be transformed into a hydrophobic membrane PDA-[PDDA/TiO2]+PFO-via the counterion exchange between Cl-and PFO-(perfluorooctanoate).The transformation between hydrophilicity and hydrophobicity is reversible.For both hydrophilic and hydrophobic membranes,the nanofiltration performances were respectively investigated by the aqueous solution and ethanol solution of dyes including methyl blue(MB),Congo red(CR)and Evans blue(EB),and as well metal salt aqueous solution.The consecutive running stability and anti-fouling performance of both hydrophilic and hydrophobic membranes were explored.The results revealed that both membranes showed high nanofiltration performances for retention of dyes in(non)aqueous solution.For the hydrophilic membrane,the rejection of salts in a sequence is MgSO4>Na2SO4>MgCl2>NaCl.Moreover,both of the hydrophilic and hydrophobic membranes showed high stability and antifouling property.

IONIC SELF-ASSEMBLY AND HUMIDITY SENSITIVITY OF POLYELECTROLYTE MULTILAYERS

Multilayer thin films of alternately adsorbed layers of polyelectrolytes PDDA and PS-119 were formed on both planar silica substrates and optical fibers through the ionic self-assembly technique. Intrinsic Fabry-Perot cavities were fabricated by stepwise assembling the polyelectrolytes onto the ends of optical fibers for the purposes of fiber optical device and sensor development. Ionically assembled polyelectrolyte multilayer thin films, in which. there are hydrophilic side groups with strong affinity towards water molecules, are a category of humidity-sensitive functional materials. The polyelectrolyte multilayer thin film Fabry-Perot cavity-type fiber optical humidity sensor can work over a wide range from about 0% RH to about 100% RH with a response time less than 1 s.

Probing surface interactions of underwater oleophobic polyelectrolyte multilayers

In the present work,the interaction mechanism of specific polyelectrolyte multilayers(PEMs),fabricated by layer-by-layer deposition of polydiallyldimethylammonium chloride(PDDA)and poly(sodium 4-styrenesulfonate)(PSS),is studied using atomic force microscopy.The underwater oil-repellency of PS S-capped PEMs was further explored by measuring the interaction forces between tetradecane droplets and PEMs-coated silica substrates under various salinities.The force curves were analyzed following the Stokes-Reynolds-Young-Laplace theoretical model.Desirable consistency was achieved between the experimental and theoretical calculations at low NaCl concentrations(0.1 mM and 1 mM);however,underestimation of the attractive force was found as the NaCl concentration increases to moderate(10 mM)and high(100 mM)levels.Discrepancy analyses and incorporated features toward a reduced surface charge density were considered based on the previous findings of the orientation of anionic benzenesulfonate moieties(Liu et al.in Angew Chem Int Ed 54(16):4851-4856,2015.https://doi.org/10.1002/anie.201411992).Short-range steric hindrance interactions were further introduced to simulate"brush"effect stemming from nanoscale surface roughness.It is demonstrated in our work that the PSS-capped PEMs remains a stable underwater lipophobicity against high salinity,which renders it potential application in surface wetting modification and anti-fouling.

Tunable and sustained-release characteristics of venlafaxine hydrochloride from chitosan–carbomer matrix tablets based on in situ formed polyelectrolyte complex film coating

The objective of this study is to design sustained-release tablets using matrix technology, which can well control the release of highly water-soluble drugs with good system robustness and simple preparation process. Taking venlafaxine hydrochloride(VH) as a drug model, the feasibility of using chitosan(CS), carbomer(CBM) combination system to achieve this goal was studied. Formulation and process variables influencing drug release from CS–CBM matrix tablets were investigated. It was found that CS–CBM combination system weakened the potential influence of CS, CBM material properties and gastric emptying time on drug release profile. Demonstrated by direct observation, differential scanning calorimetry(DSC) and Fourier transform infrared spectroscopy(FTIR), in situ self-assembled polyelectrolyte complex(PEC) film was formed on the tablet surface during gastrointestinal tract transition, which contributed to the tunable and robust control of drug release. The sustained drug release behavior was further demonstrated in vivo in Beagle dogs, with level A in vitro and in vivo correlation(IVIVC) established successfully. In conclusion, CS–CBM matrix tablets are promising system to tune and control the release of highly water-soluble drugs with good system robustness.

Formation of surface-attached microstructured polyelectrolyte brushes

Surface-attached micropattemed polyelectrolyte brushes on planar solid surfaces are generated using free radical polymerization photo-initiated by self-assembled initiator monolayers. It is shown that the formed patterns can be either negative or positive with different patterning processes.

In-situ electrochemical surface-enhanced Raman spectroscopy in metal/polyelectrolyte interfaces

Polyelectrolyte becomes more and more popular in electrocatalysis.The understanding of electrode/polyelectrolyte interfaces at the molecular level is important for guiding further the polyelectrolyte-based electrocatalysis.Herein,we demonstrate an in-situ surface-enhanced Raman spectroscopic method by using a three-electrode spectroelectrochemical cell towards characterizing the electrode/polyelectrolyte interfaces.The Ag/AgCl and Ag/Ag_(2)O electrodes are used as the reference electrode in the acidic and the alkaline systems,respectively.The working electrode is made of a transparent carbon thin film which loads the electrocatalysts.The applications of this method are demonstrated through the in-situ characterizations of the p-methylthiophenol adsorbed on the Au and Pt and the electrochemical oxidation of Au on polyelectrolyte membranes.The potential-dependent spectral features of these two systems show that this method is a powerful tool for investigating the electrode/polyelectrolyte interfaces in electrocatalysis.

Morphologies of a spherical bimodal polyelectrolyte brush induced by polydispersity and solvent selectivity

It is commonly realized that polydispersity may significantly affect the surface modification properties of polymer brush systems. In light of this, we systematically study morphologies of bidisperse polyelectrolyte brush grafted onto a spherical nanocolloid in the presence of trivalent counterions using molecular dynamics simulations. Via varying polydispersity, grafting density, and solvent selectivity, the effects of electrostatic correlation and excluded volume are focused, and rich phase behaviors of binary mixed polyelectrolyte brush are predicted, including a variety of pinned-patch morphologies at low grafting density and micelle-like structures at high grafting density. To pinpoint the mechanism of surface structure formation, the shape factor of two species of polyelectrolyte chains and the pair correlation function between monomers from different polyelectrolyte ligands are analyzed carefully. Also, electrostatic correlations, manifested as the bridging through trivalent counterions, are examined by identifying four states of trivalent counterions. Our simulation results may be useful for designing smart stimuli-responsive materials based on mixed polyelectrolyte coated surfaces.

PREPARATION OF POLYELECTROLYTE MULTILAYER COATED MICROBUBBLES FOR USE AS ULTRASOUND CONTRAST AGENT

Objeelive To prepare and characterize polyelectrolyte multilayer film coated microbubbles for use as ultrasound contrast agent （UCA） and evaluate its effects in ultrasonic imaging on normal rabbit＇s fiver parenchyma. Methods Perfluorocarbon （PFC）-containing microbubbles （ST68-PFC） were prepared by sonication based on suffactant （ Span 60 and Tween 80）. Subsequently, the resulting ST68-PFC microbubbles were coated using oppositely charged polyelectrolytes by microbubble-templated layer-by-layer self-assembly technique via electrostatic interaction. The enhancement effects in ultrasonic imaging on normal rabbit＇s liver parenchyma were assessed. Results The obtained microbubbles exhibited a narrow size distribution. The polyelectrolytes were successfully assembled onto the surface of ST68-PFC microbubbles. In vivo experiment showed that polyelectrolyte multilayer film coated UCA effectively enhanced the imaging of rabbit＇s liver parenchyma. Conclusions The novel microbubbles UCA coated with polyelectrolyte multilayer, when enabled more function, has no obvious difference in enhancement effects compared with the pre-modified microbubbles. The polymers with chemically active groups （ such as amino group and carboxyl group） can be used as the outermost layer for attachment of targeting ligands onto microbubbles, allowing selective targeting of the microbubbles to combine with desired sites.

An easily recoverable thermo-sensitive polyelectrolyte as draw agent for forward osmosis process

As a potential solution to the crises of energy and resources, forward osmosis(FO) has been limited by the development of draw agents. An ideal draw agent should be able to generate high osmotic pressure and can be easily recovered. In this study, a thermo-sensitive polyelectrolyte of poly(N-isopropylacrylamide-co-acrylic acid)(PNA)is developed as an efficient draw agent, and two easy and simple methods are proposed to effectively recover the polyelectrolytes. After adjusting the pH value of polyelectrolyte solutions to around 6.0, the polyelectrolyte can generate relatively high osmotic pressure, and induce average water fluxes of 2.09 and 2.95 L·m^(-2)·h^(-1) during12 h FO processes when the polyelectrolyte concentrations are 0.20 and 0.38 g·ml^(-1) respectively. After acidifying and heating to 70 °C, the PNA-10 polyelectrolyte can aggregate together because of hydrophobic association and separate from water, so it can be easily recovered by either simple centrifugation or gravitational sedimentation. The recovery ratios of PNA-10 polyelectrolyte in both methods are as high as 89%, and the recovered polyelectrolytes can be reused with almost the same FO performance as fresh ones. The results in this study provide valuable guidance for designing efficient and easily recoverable draw agents for FO processes.

Polyelectrolyte complex micelles by self-assembly of polypeptide-based triblock copolymer for doxorubicin delivery

Polyelectrolyte complex micelles were prepared by self-assembly of polypeptide-based triblock copolymer as a new drug carrier for cancer chemotherapy.The triblock copolymer,poly(L-aspartic acid)-b-poly(ethylene glycol)-b-poly(L-aspartic acid)(PLD-b-PEG-b-PLD),spontaneously self-assembled with doxorubicin(DOX)via electrostatic interactions to form spherical micelles with a particle size of 60e80 nm(triblock ionomer complexes micelles,TBIC micelles).These micelles exhibited a high loading capacity of 70%(w/w)at a drug/polymer ratio of 0.5 at pH 7.0.They showed pH-responsive release patterns,with higher release at acidic pH than at physiological pH.Furthermore,DOX-loaded TBIC micelles exerted less cytotoxicity than free DOX in the A-549 human lung cancer cell line.Confocal microscopy in A-549 cells indicated that DOX-loaded TBIC micelles were transported into lysosomes via endocytosis.These micelles possessed favorable pharmacokinetic characteristics and showed sustained DOX release in rats.Overall,these findings indicate that PLDb-PEG-b-PLD polypeptide micelles are a promising approach for anti-cancer drug delivery.

A Multiparameter Colloidal Titrations for the Determination of Cationic Polyelectrolytes

In water treatment processes and conditioning drinking water, PEs are widely used;however, their environmental impact is still doubtful, since residual concentrations increase organic matter content and represents a potential health hazard. This paper demonstrates a multiparametric study of two colloidal titration methods: spectrophotometric and zeta potential end point detection. The first one was optimized to guarantee the accuracy of cationic commercial PE quantification. It includes the indicator dose optimization using analytical criteria for competing equilibria, a calibration curve for two ranges of CPE concentration (1 - 5 ppm and 5 - 100 ppm) and the interference study of flocculant and Sn in the CPE quantification. The second method provides a physicochemical validation of the electric surface phenomena occurring during the colloidal titration and the end point detection. As an additional contribution the zeta potential titration was discussed and proposed as an alternative method for quantifying CPE when the sample is metal free.

BINDING OF IONIC SURFACTANTS ON OPPOSITELY CHARGED POLYELECTROLYTES OBSERVED BY FLUORESCENCE METHODS

Our recent studies concerning the binding of ionic surfactants on oppositely charged polyelectrolytes observedwith fluorescence techniques are reviewed. The cationic surfactants cetyltrimethylammonium bromide (CTAB),dodecyltrimethylammonium chloride (DTAC), and nonionic surfactant octaethylene glycol monododecyl ether (C_(12)E_8) wereallowed to bind on anionic poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPS) and its pyrene and/or naphthalenelabeled copolymers. The relative excimer emission intensity I_E/I_M of a cationic probe l-pyrenemethylamine hydrochloride(PyMeA·HCl) and the non-radiative energy transfer (NRET) I_(Py)/I_(Np) of naphthalene to pyrene for labeled polyelectrolyteswere chosen to monitor the binding process and the conformation change of surfactant-bound polyelectrolytes. The 1:1aggregation of polyelectrolyte-CTAB with respect to the charge was found as long as the CTAB concentration was slightlyhigher than its critical aggregation concentration (CAC). The intermolecular NRET indicated that the CTAB-boundpolyelectrolytes aggregated together through the hydrophobic interaction between the CTAB tails. However, neither 1:1polyelectrolyte-DTAC aggregation nor intermolecular aggregation of DTAC-bound polyelectrolyte was observed owing to itsweaker hydrophobicity of 12 carbon atoms in the tail, which is shorter than that of CTAB. As known from the fluorescenceresults, nonionic surfactant C_(12)E_8 did not bind on the anionic polyelectrolytes, but the presence of PAMPS promoted themicelle formation for C_(12)E_8 at the CAC slightly below its critical micelle concentration (CMC). The solid complex of dansyllabeled AMPS copolymer-surfactant exhibited a decrease in local polarity with increasing charge density of thepolyelectrolyte or with alkane tail length of the surfactant. SAXS suggested a lamella structure for the AMPS copolymer-surfactant solid complexes with a long period of 3.87 nm for CTAB and 3.04 nm for DTAC, respectively.