This article proposes to associate a Deuterium-Deuterium (D-D) fusion reactor with a PWR (fission Pressurized Water Reactor) in a hybrid reactor. Even if the mechanical gain (Q factor) of the D-D fusion reactor is bel...This article proposes to associate a Deuterium-Deuterium (D-D) fusion reactor with a PWR (fission Pressurized Water Reactor) in a hybrid reactor. Even if the mechanical gain (Q factor) of the D-D fusion reactor is below the unity and consequently consumes more energy than it supplies, due to the high energy amplification factor of the PWR fission reactor, the global yield is widely superior to 1. As the energy supplied by the fusion reactor is relatively low and as the neutrons supplied are mainly issued from D-D fusions (at 2.45 MeV), the problems of heat flux and neutrons damage connected with materials, as with D-T fusion reactors are reduced. Of course, there is no need to produce Tritium with this D-D fusion reactor. This type of reactor is able to incinerate any mixture of natural Uranium, natural Thorium and depleted Uranium (waste issued from enrichment plants), with natural Thorium being the best choice. No enriched fuel is needed. So, this type of reactor could constitute a source of energy for several thousands of years because it is about 90 more efficient than a standard fission reactor, such as a PWR or a Candu one, by extracting almost completely the energy from the fertile materials U238 and Th232. For the fission part, PWR technology is mature. For the fusion part, it is based on a reasonable hypothesis done on present Stellarators projects. The working of this reactor is continuous, 24 hours a day. In this paper, it will be targeted a reactor able to provide net electric power of about 1400 MWe, as a big fission power plant.展开更多
This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an impo...This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an important role which effects the reliablity,safty,cost of SG and its mathematical models have been solved.A model of the conventional controller is presented and the existing problems are discussed. A novel rule based realtime control technique is designed with a computerized water level control (CWLC) system for SG of PWR NPP.The performance of this is evaluated for full power reactor operating conditions by applying different transient conditions of SG′s data of Qinshan Nuclear Power Plant (QNPP).展开更多
Ex-vessel steam explosion may happen as a result of melting core falling into the reactor cavity after failure of the reactor vessel and interaction with the coolant in the cavity pool. It can cause the formation of s...Ex-vessel steam explosion may happen as a result of melting core falling into the reactor cavity after failure of the reactor vessel and interaction with the coolant in the cavity pool. It can cause the formation of shock waves and production of missiles that may endanger surrounding structures. Ex-vessel steam explosion energetics is affected strongly by three dimensional(3D) structure geometry and initial conditions. Ex-vessel steam explosions in a typical pressurized water reactor cavity are analyzed with the code MC3 D, which is developed for simulating fuel-coolant interactions. The reactor cavity with a venting tunnel is modeled based on 3D cylindrical coordinate. A study was performed with parameters of the location of molten drop release, break size,melting temperature, cavity water subcooling, triggering time and explosion position, so as to establish parameters' influence on the fuel-coolant interaction behavior, to determine the most challenging cases and to estimate the expected pressure loadings on the cavity walls. The most dangerous case shows the pressure loading is above the capacity of a typical reactor cavity wall.展开更多
文摘This article proposes to associate a Deuterium-Deuterium (D-D) fusion reactor with a PWR (fission Pressurized Water Reactor) in a hybrid reactor. Even if the mechanical gain (Q factor) of the D-D fusion reactor is below the unity and consequently consumes more energy than it supplies, due to the high energy amplification factor of the PWR fission reactor, the global yield is widely superior to 1. As the energy supplied by the fusion reactor is relatively low and as the neutrons supplied are mainly issued from D-D fusions (at 2.45 MeV), the problems of heat flux and neutrons damage connected with materials, as with D-T fusion reactors are reduced. Of course, there is no need to produce Tritium with this D-D fusion reactor. This type of reactor is able to incinerate any mixture of natural Uranium, natural Thorium and depleted Uranium (waste issued from enrichment plants), with natural Thorium being the best choice. No enriched fuel is needed. So, this type of reactor could constitute a source of energy for several thousands of years because it is about 90 more efficient than a standard fission reactor, such as a PWR or a Candu one, by extracting almost completely the energy from the fertile materials U238 and Th232. For the fission part, PWR technology is mature. For the fusion part, it is based on a reasonable hypothesis done on present Stellarators projects. The working of this reactor is continuous, 24 hours a day. In this paper, it will be targeted a reactor able to provide net electric power of about 1400 MWe, as a big fission power plant.
文摘This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an important role which effects the reliablity,safty,cost of SG and its mathematical models have been solved.A model of the conventional controller is presented and the existing problems are discussed. A novel rule based realtime control technique is designed with a computerized water level control (CWLC) system for SG of PWR NPP.The performance of this is evaluated for full power reactor operating conditions by applying different transient conditions of SG′s data of Qinshan Nuclear Power Plant (QNPP).
基金Supported by National Science and Technology Major Project of China(No.2011ZX06004-008)
文摘Ex-vessel steam explosion may happen as a result of melting core falling into the reactor cavity after failure of the reactor vessel and interaction with the coolant in the cavity pool. It can cause the formation of shock waves and production of missiles that may endanger surrounding structures. Ex-vessel steam explosion energetics is affected strongly by three dimensional(3D) structure geometry and initial conditions. Ex-vessel steam explosions in a typical pressurized water reactor cavity are analyzed with the code MC3 D, which is developed for simulating fuel-coolant interactions. The reactor cavity with a venting tunnel is modeled based on 3D cylindrical coordinate. A study was performed with parameters of the location of molten drop release, break size,melting temperature, cavity water subcooling, triggering time and explosion position, so as to establish parameters' influence on the fuel-coolant interaction behavior, to determine the most challenging cases and to estimate the expected pressure loadings on the cavity walls. The most dangerous case shows the pressure loading is above the capacity of a typical reactor cavity wall.
