Photocatalytic degradation of methylene blue over MIL-100(Fe)/GO composites: a performance and kinetic study

Adsorption coupled with photocatalytic degradation is proposed to fulfill the removal and thorough elimination of organic dyes.Herein,we report a facile hydrothermal synthesis of MIL-100(Fe)/GO photocatalysts.The adsorption and photocatalytic degradation process of methylene blue(MB)on MIL‐100(Fe)/GO composites were systematically studied from performance and kinetic perspectives.A possible adsorption‐photocatalytic degradation mechanism is proposed.The optimized 1M8G composite achieves 95%MB removal(60.8 mg/g)in 210 min and displays well recyclability over ten cycles.The obtained MB adsorption and degradation results are well fitted onto Langmuir isotherm and pseudo‐second order kinetic model.This study shed light on the design of MOFs based composites for water treatment.

Recent developments in visible-light photocatalytic degradation of antibiotics

With the significant discharge of antibiotic wastewater into the aquatic and terrestrial ecosystems, antibiotic pollution has become a serious problem and presents a hazardous risk to the environment. To address such issues, various investigations on the removal of antibiotics have been undertaken. Photocatalysis has received tremendous attention owing to its great potential in removing antibiotics from aqueous solutions via a green, economic, and effective process. However, such a technology employing traditional photocatalysts suffers from major drawbacks such as light absorption being restricted to the UV spectrum only and fast charge recombination. To overcome these issues, considerable effort has been directed towards the development of advanced visible light-driven photocatalysts. This mini review summarises recent research progress in the state-of-the-art design and fabrication of photocatalysts with visible-light response for photocatalytic degradation of antibiotic wastewater. Such design strategies involve the doping of metal and non-metal into ultraviolet light-driven photocatalysts, development of new semiconductor photocatalysts, construction of heterojunction photocatalysts, and fabrication of surface plasmon resonance-enhanced photocatalytic systems. Additionally, some perspectives on the challenges and future developments in the area of photocatalytic degradation of antibiotics are provided.

Enhanced photocatalytic degradation of sulfadiazine by Fe^(3+) in aqueous TiO_2 suspension

In order to explore the reaction mechanism of Fe^3＋ and the mineralization effect of the micropollutant, Fe^3＋ assisted photocatalytic oxidation of sulfadiazine （SD） in the TiO2 suspended solution is investigated. The effect of Fe^3＋ participation, the degradation kinetics of SD, the effect of SD mineralization and the possible mechanism of Fe^3＋ participation in TiO2 suspension are analyzed by adding FeCl3, taking samples at a given time and determining the SD concentration. Results indicate that the degradation of SD catalyzed by TiO2/ Fe^3＋ is faster than that catalyzed by TiO2 or Fe^3＋ separately. The photocatalytic degradation of SD follows the pseudo-first- order kinetics model in a range of 20 to 80 mg/L of initial concentration. The mineralization rate of SD can be enhanced by the addition of Fe^3＋ in the TiO2 suspended solution. The mechanism of the rapid degradation of SD is proposed, which indicates that Fe^3＋ adsorbed on the surface of TiO2 particles acts as an electron acceptor. The amount of recombining electronhole pairs decreases, and the amount of hydroxyl radicals increases. The increased hydroxyl radical strengthens the degradation of SD in the TiO2/Fe^3＋ suspended solution.

Photocatalytic Degradation of Water-Soluble Dyes by LaCoO_3

Pervoskite type oxides LaCoO 3 was prepared by citrate method with the granula of 20 nm-30 nm. With a fluorescent Hg lamp or sunlight as irradiator, the degradation experiments of various water soluble dyes were carried out in the suspension system of LaCoO 3 . The results show that the pervoskite type oxide LaCoO 3 has good photocatalytic activity.Studied by X ray photoelectron spectroscopy and photoacoustic spectra, its photocatalytic activity is found to be related with factors such as the d electron structure of ion Co 3+ ,Co—O binding energy and adsorbed oxygen on the surface etc.

Photocatalytic Degradation of Phenol over MWCNTs-TiO2 Composite Catalysts with Different Diameters

Titania-based composite catalysts were prepared through a sol-gel route employing multi-walled carbon nanotubes with different diameters. The materials were characterized using thermogravimetric analysis, nitrogen adsorption-desorption isotherm, powder X-ray diffraction, scanning electron microscopy, and diffuse reflectance UV-Vis absorption spectra. The application of the catalysts to photocatalytic degradation of phenol was tested under UV-Vis irradiation. A synergetic effect on phenol removal was observed in case of composite catalysts, which was evaluated in terms of apparent rate constant, total organic carbon removal and photonic efficiency.

Photocatalytic Degradation of Water-Soluble Dyes by LaCoO3

Pervoskite type oxides LaCoO 3 was prepared by citrate method with the granula of 20 nm-30 nm. With a fluorescent Hg lamp or sunlight as irradiator, the degradation experiments of various water soluble dyes were carried out in the suspension system of LaCoO 3 . The results show that the pervoskite type oxide LaCoO 3 has good photocatalytic activity.Studied by X ray photoelectron spectroscopy and photoacoustic spectra, its photocatalytic activity is found to be related with factors such as the d electron structure of ion Co 3+ ,Co—O binding energy and adsorbed oxygen on the surface etc.

Photocatalytic degradation of the dye sulforhodamine-B: A comparative study of different light sources

The photocatalytic degradation of dye pollutant sulforhodamine-B （SRB） in aqueous titanium dioxide （TiO2） dispersions was examined under three lighting regimes： UV light （330 nm〈λ〈 380 nm）, sunlight, and visible light （λ〉450 nm）, all investigated at pH=2.5. Total organic carbon （TOC） and chemical oxygen demand （CODer） assays show that the degradation rate of SRB is much higher when irradiated with UV and sunlight compared with visible light. The temporal concentration changes of SRB illustrated a first-order reaction and the rate constant, k, is 0.197 min^-1, 0.152 min^-1, 0.027 min^-1, respectively, under the three lighting conditions. The final mineralized products were amine compounds identified by infrared spectrophotometry. When irradiated with visible light, the photocatalytic degradation rate could be improved by lowering the H2O2 concentration and inhibited by increasing the H2O2 concentration, but results contrary to the above were obtained when UV light was used for irradiation.

Photocatalytic Degradation of Water-Soluble Dyes by LaCoO_3

Perovskite type oxides LaCoO 3 was prepared by citrate method in granula of 20～30 nm. Using a fluorescent Hg lamp or sunlight as irradiator, the degradation experiments of various water soluble dyes were carried out in the suspension system of LaCoO 3. The results show that the perovskite type oxide LaCoO 3 has good photocatalytic activity. With the study of X ray photoelectron spectroscopy and photoacoustic spectra, its photocatalytic activity is mainly related with the factors such as the d electron structure of ion Co 3+ , Co O binding energy and adsorbed oxygen on the surface etc.

Photocatalytic degradation of dyes by AgBr/Ag_3PO_4 and the ecotoxicities of their degraded products

Ag3PO4 powders were prepared through a precipitation reaction between AgNO3 and precipitating agent solutions that were prepared by adjusting the amount of H3PO4 in the Na3PO4 solutions. The Ag3PO4 powders prepared from the precipitation solution with a pH of 6 showed the highest photocatalytic activity for decolorizing the methylene blue and rhodamine B dyes. These Ag3PO4 powders were further modified by the addition of KBr solutions to obtain AgBr/Ag3PO4 powders and these photocatalysts can decolorize the anionic dyes as reactive orange and methyl orange. The reactive species involved in the photocatalytic degradation process were evaluated for their inhibitory activity using the appropriate scavengers. After photocatalysis, mass spectrometry confirmed that the dyes were degraded to smaller molecules. The ecotoxicities of the dye solutions before and after treatment were evaluated by studying their ability to inhibit the growth of the bioindicator Chlorella vulgaris.

Effects of common inorganic anions on the rates of photocatalytic degradation of sodium dodecylbenzenesulfonate over illuminated titanium dioxide

Experiments were carried out to study the effects of several anions on the photocatalytic degradation rates of sodium dodecylbenzene sulphonate (DBS) with TiO 2 as catalyst. The anions were added as Na 2SO 4, NaNO 3, NaCl, NaHCO 3, NaH 2PO 4 and Na 3PO 4, and two levels of anion content, i.e. 12 mmol/L and 36 mmol/L in terms of Na +, were studied. The results revealed that: Cl -, SO 2- 4, NO - 3 and HCO - 3 retarded the rates of DBS degradation to different degrees; PO 3- 4 increased the DBS degradation rate at low concentration and decreased the rate at high concentration; H 2PO - 4 accelerated the rate of DBS degradation. The mechanism of the effects of anions on DBS degradation was concluded as the following three aspects: anions compete for the radicals; anions are absorbed on the surface of catalyst and block the active site of catalyst; anions added to the solution change the pH value and influence the formation of ·OH radicals and the adsorption of DBS on catalyst.

Effect of bismuth tungstate with different hierarchical architectures on photocatalytic degradation of norfloxacin under visible light

The photocatalytic degradation of norfloxacin by bismuth tungstate(Bi2WO6)with different hierarchical architectures wasinvestigated under visible light irradiation.Bi2WO6was prepared by hydrothermal method with the reaction solution pH rangingfrom4to11.The relatively ultrathin Bi2WO6nanoflakes prepared at pH4showed excellent adsorption and photodegradationefficiency towards norfloxacin.The characterization results showed that Bi2WO6prepared at pH4had a larger specific area andfaster photo-generated carrier separation rate.The decay rate reached the maximum in weak alkaline reaction solution,which couldbe attributed to the presence of moderate OH-anions.The present study demonstrated that the smaller size of Bi2WO6could be anefficient photocatalyst on the degradation of norfloxacin in the aquatic environment.

Photocatalytic degradation of acid orange 7 in aqueous solution with La^(3+)-doped TiO_2 photocatalysts

Nanocrystalline La^3＋-doped TiO2 of 20-30 nm in size was prepared by a sol-gel technique. The photocatalytic activities of the samples were evaluated by the degradation of harmful acid orange 7（AO7） azo-dye in aqueous solution. The effects of La^3＋ ion implantation on the photocatalytic activity of TiO2 were also discussed. The results show that the La^3＋ content plays an essential role in affecting the photocatalytic activity of the La^3＋-doped TiO2 and the optimum content of La^3＋-doped is 1.0 wt.%. The photocatalytic activity of the samples with La^3＋-doped TiO2 is higher than that of pure TiO2 in the treatment of AO7 wastewater. The photodegradation effect of AO7 effluent is the best by means of La^3＋-doped TiO2 with 1.0% La^3＋.

Photocatalytic degradation of MO by complex nanometer particles WO_3/TiO_2

Complex nanometer particles WO3/TiO2 were prepared using a sol-gel process and characterized using XRD spectra. The photocatalytic activity of TiO2 can be increased by doping W^6＋ with TiO2 because the doped W^6＋ that entered into the crystal lattices of TiO2 led to the formation of defects in the crystal lattices of TiO2 and thereby improved the photocatalytic activity of TiO2.When WO3 doped in TiO2 exceeded 3%, the excess W^6＋ did not enter into the crystal lattices of TiO2 but were uniformly dispersed in TiO2 or they covered the surface of TiO2, which reduced the effective illumination area of TiO2 and thereby lowered the photocatalytic activity of TiOE.The relationship among the composition of the catalyst, the amount of photocatalyst, the illumination time, and the decolorizing rate of methyl orange （MO） were discussed. The results show that the decolorizing rate of MO can reach 82.3% using WO3/TiO2 as the photocatalyst, with the composition of WO3/TiO2 -3：97, the mass of catalyst = 0.400 g, the initial concentration of MO = 20 mg/L, pH = 6.5, and the illumina- tion time = 7 h.

Self-assembly synthesis of S-scheme g-C_(3)N_(4)/Bi_(8)(CrO_(4))O_(11) for photocatalytic degradation of norfloxacin and bisphenol A

To realize the high-efficiency photodegradation of antibiotics,a novel S-scheme heterojunction photocatalyst g-C_(3)N_(4)/Bi_(8)(CrO_(4))O_(11) was proposed and successfully prepared in this work.The 10%g-C_(3)N_(4)/Bi_(8)(CrO_(4))O_(11) heterojunction exhibits the highest degradation rate of norfloxacin(NOR)and bisphenol A(BPA).The degradation rate of NOR on 10%g-C_(3)N_(4)/Bi_(8)(CrO_(4))O_(11) is about 1.38 and 2.33 times higher than that of pure Bi_(8)(CrO_(4))O_(11) and g-C_(3)N_(4),respectively.Further,the degradation rate of BPA over 10%g-C_(3)N_(4)/Bi_(8)(CrO_(4))O_(11) heterojunction is bout 1.35 and 9.11 times higher than that of pure Bi_(8)(CrO_(4))O_(11) and g-C_(3)N_(4),respectively.The formation of S-scheme heterojunction facilitates the separation of photogenerated electron-hole pairs and reduces the recombination of charge carriers,which was confirmed by photocurrent,electrochemical impedance spectroscopy,steady-state and time-resolved transient photoluminescence spectrum,etc.The in-situ X-ray photoelectron spectroscopy,radical trapping experiments and electron paramagnetic resonance results demonstrate that the charge transfer is in accord with S-scheme mechanism.

Study on the Photocatalytic Degradation of Microcystins with UV/Fenton/TiO2

[Objective] The paper aimed to study on the effects of photocatalytic degradation of microcystins MC-RR and MC-LR by UV/Fenton/TiO2 in depth lake water.[Method] With Fenton-TiO2 as photocatalyst,the influences of different reaction time,initial pH value,H2O2 concentration,Fe2+ concentration,TiO2 dosage,light intensity,initial concentration of microcystin on UV/Fenton/TiO2 heterogeneous photocatalytic degradation of microcystin were investigated,and removal effects of microcystin between heterogeneous photocatalytic degradation and UV photolysis were compared at the same time.[Result] Under the conditions that the initial concentration of H2O2 was 0.1 mmol/L,[H2O2]/[FeSO4] was 15:1,pH value was 4.0,the distance between the reaction solution and UV lamp tube was 1 cm,TiO2 dosage was 0.05 g/L,reaction temperature was (16±2) ℃,the removal rate of MC-RR with concentration of 0.35 mg/L and MC-LR with concentration of 0.29 mg/L could reach 91.5% and 90.2% after 3 minutes reacting.[Conclusion] UV/Fenton/TiO2 photocatalytic oxidation was proved to be effective in degradating microcystins.

Pomelo biochar as an electron acceptor to modify graphitic carbon nitride for boosting visible-light-driven photocatalytic degradation of tetracycline

In this study,biochar(BC)derived from pomelo was prepared via a high-temperature calcination method to modify the graphitic carbon nitride(g-C_(3)N_(4))to synthesize the BC/g-C_(3)N_(4)composite for the degradation of the tetracycline(TC)antibiotic under visible light irradiation.The experimental results exhibit that the optimal feeding weight ratio of biochar/urea is 0.03:1 in BC/g-C_(3)N_(4)composite could show the best photocatalytic activity with the degradation rate of tetracycline is 83%in 100 min irradiation.The improvement of photocatalytic activity is mainly attributed to the following two points:(i)the strong bonding with π-π stacking between BC and g-C_(3)N_(4)make the photogenerated electrons of light-excited g-C_(3)N_(4)transfer to BC,quickly and improve the separation efficiency of carriers;(ii)the introduction of BC reduces the distance for photogenerated electrons to migrate to the surface and increases the specific surface area for providing more active sites.This study provides a sustainable,economical and promising method for the synthesis of photocatalytic materials their application to wastewater treatment.

Heterogeneous Photocatalytic Degradation Kinetic of Gaseous Ammonia Over Nano-TiO_2 Supported on Latex Paint Film

Objective To investigate the photocatalytic degradation of gaseous ammonia in static state by using nano-TiO2 as photoeatalyst supported on latex paint film under UV-irradiation. Methods Experiments were conducted to study the relationship between the initial concentration of ammonia and the degradation products competing to be adsorbed on catalyst surface. Degradation of ammonia and its products were detected by spectrophotometry and catalytic kinetic spectrophotometry, respectively. Results On the one hand, TiO2 catalyst was excellent for degradation of ammonia, and the crystal phase of TiO2, anatase or ruffle, had little effect on degradation of ammonia, but the conversion of ammonia grew with the increase of catalyst content. On the other hand, apparent rate constant and conversion of ammonia decreased with the increase of initial concentration of ammonia, and the photocatalytic degradation reaction followed a pseudo-first-order expression due to-the evidence of linear correlation between -lnC/C0 vs. irradiation time t, but the relationship between initial concentration and the degradation products was not linear in low initial concentration. Conclusion Whether the photocatalytic degradation of ammonia in static state follows a first-order reaction depends on the initial ammonia concentration due to competition in adsorption between reactant and the degradation products.

Precursor-modified strategy to synthesize thin porous amino-rich graphitic carbon nitride with enhanced photocatalytic degradation of RhB and hydrogen evolution performances

The photocatalytic activity of carbon nitride(CN)materials is mainly limited to small specific surface areas,limited solar absorption,and low separation and mobility of photoinduced carriers.In this study,we developed a precursor-modified strategy for the synthesis of graphitic CN with highly efficient photocatalytic performance.The precursor dicyandiamide reformed by different acids undergoes a basic structural change and transforms into diverse new precursors.The thin porous amino-rich HNO_(3)-CN(5H-CN)was calcined by dicyandiamidine nitrate,formed by concentrated nitric acid modified dicyandiamide,and presented the best photocatalytic degradation rate of Rh B,more than 34 times that of bulk graphitic CN.Moreover,the photocatalytic hydrogen evolution rate of 5H-CN significantly improved.The TG-DSC-FTIR analyses indicated that the distinguishing thermal polymerization process of 5H-CN led to its thin porous amino-rich structure,and the theoretical calculations revealed that the negative conduction band potential of 5H-CN was attributed to its amino-rich structure.It is anticipated that the thin porous structure and the negative conduction band position of 5H-CN play important roles in the improvement of the photocatalytic performance.This study demonstrates that precursor modification is a promising project to induce a new thermal polycondensation process for the synthesis of CN with enhanced photocatalytic performance.

Enhanced photocatalytic degradation of methyl orange by CdS quantum dots sensitized platelike WO_3 photoelectrodes

CdS quantum dots sensitized platelike WO_3 photoelectrodes were successfully synthesized by a facile hydrothermal method and a modified chemical bath deposition(CBD) technique.To further improve the stability of the photoelectrodes in alkaline environment,the platelike WO_3 films were treated with TiCl_4 to form a nano-TiO_2 buffer layer on the WO_3 plate surface before loading CdSQDs.The resulting electrodes were characterized by using XRD,SEM,HR-TEM and UV-vis spectrum.The photocatalytic activity of the resulting electrodes was investigated by degradation of methyl orange(MO) in aqueous solution.The photoelectrochemical(PEC) property of the resulting electrodes was also characterized by the linear sweep voltammetry.The results of both the degradation of MO and photocurrent tests indicated that the as-prepared CdSQDs sensitized WO_3 platelike photoelectrodes exhibit a significant improvement in photocatalytic degradation and PEC activity under visible light irradiation,compared with unsupported CdSQDs electrodes.Significantly,coating the WO_3 plates with nano-TiO_2 obviously facilitate the charge separation and retards the charge-pair recombination,and results in a highest activity for QDsCdS/TiO_2/WO_3 photoelectrodes.

Kinetics of Photocatalytic Degradation of Methylene Blue Over CaTiO_3

Kinetics of photocatalytic degradation of methylene blue(MB) over Ca Ti O3 was studied. Effects of the solution p H, the MB concentration, the Ca Ti O3 dosage, and the type of light source on photocatalytic degradation rate of MB over Ca Ti O3 were investigated in detail. The results show that photocatalytic degradation of MB over Ca Ti O3 followed the first-order reaction. The apparent rate constant(kobs) of MB significantly increased with increasing solution p H while it greatly decreased with increasing MB concentration. The kobs of MB increased with increasing Ca Ti O3 dosage from 0.05 to 0.1 g, whereas it slightly decreased with increasing Ca Ti O3 dosage in the range of 0.1-0.4 g. The kobs of MB under UV-visible light irradiation was larger by factors of 2.2 than that under visible light irradiation. The kobs of MB was(4.8±0.3)×10-1h-1 under optimal conditions with the solution p H of 11, the MB concentration of 1 ppm, the Ca Ti O3 dosage of 0.1 g, and UV-visible light irradiation.