Based on the stability criteria of workpiece-fixture system, quantitative optimization of clamping forces during precise machining process for thin walled part is studied considering the contact condition between wokp...Based on the stability criteria of workpiece-fixture system, quantitative optimization of clamping forces during precise machining process for thin walled part is studied considering the contact condition between wokpiece and locator, the contact mechanical model is achieved, which is further been used to calculate the entire passive forces acting on the statically undetermined workpiece by means of the force screw theory as well as minimum norm force principle. Furthermore, a new methodology to optimize clamping forces is put forward, on the criteria of keeping the stability of workpiece during cutting process. By this way, the intensity of clamping forces is decreased dramatically, which will be most beneficial for improving the machining quality of thin-walled parts. Finally, a case study is used to support and validate the proposed model.展开更多
In this paper the conception of theoretical determine the relations between material experimental characteristics is presented. On the base of stress-strain relations for nonlinear elastic anisotropic material and geo...In this paper the conception of theoretical determine the relations between material experimental characteristics is presented. On the base of stress-strain relations for nonlinear elastic anisotropic material and geometrical interpretation of deformation state, the general form of strain energy density function was introduced. Using this function and variational methods the relations between material characteristics were achieved. All considerations are illustrated by a short theoretical example.展开更多
The geomorphic minimum energy dissipation principle is important in the development of gully evolutionary theory.The impact of debris flows on channels during movement also adheres to this theory.A minimum energy diss...The geomorphic minimum energy dissipation principle is important in the development of gully evolutionary theory.The impact of debris flows on channels during movement also adheres to this theory.A minimum energy dissipation model for debris flows has been obtained from previous studies,which is derived from the flow rules of runoff along a channel under rainfall or ice-snow meltwater conditions.However,the lack of consideration for erosion characteristics has hindered a comprehensive understanding of the movement characteristics of debris flow.In this paper,the phenomenon of volume increase resulting from the entrainment along debris flow movement is considered in order to derive a model for the mean velocity,reflecting the minimum energy dissipation principle.The entire expression of the mean velocity model is determined through 38 typical glacial and rainstorm debris flow cases.To evaluate the reliability of the proposed model,we employed 164 monitoring data from 1995 to 2000 in the Jiangjia gully,Yunnan,China.The results show that the velocity calculated by the proposed model are highly correlated with those obtained from the monitoring data.Additionally,a comparison is made between the mean velocities calculated by the proposed model and those obtained from previous studies,highlighting the exceptional applicability of the proposed model.This study will contribute to reveal the movement laws of debris flow along the channel.展开更多
This paper presents not only practical but also instructive mathematical models to simulate tree network formation using the Poisson equation and the Finite Difference Method (FDM). Then, the implications for entropic...This paper presents not only practical but also instructive mathematical models to simulate tree network formation using the Poisson equation and the Finite Difference Method (FDM). Then, the implications for entropic theories are discussed from the viewpoint of Maximum Entropy Production (MEP). According to the MEP principle, open systems existing in the state far from equilibrium are stabilized when entropy production is maximized, creating dissipative structures with low entropy such as the tree-shaped network. We prepare two simulation models: one is the Poisson equation model that simulates the state far from equilibrium, and the other is the Laplace equation model that simulates the isolated state or the state near thermodynamic equilibrium. The output of these equations is considered to be positively correlated to entropy production of the system. Setting the Poisson equation model so that entropy production is maximized, tree network formation is advanced. We suppose that this is due to the invocation of the MEP principle, that is, entropy of the system is lowered by emitting maximal entropy out of the system. On the other hand, tree network formation is not observed in the Laplace equation model. Our simulation results will offer the persuasive evidence that certifies the effect of the MEP principle.展开更多
综合能源系统(integrated energy system,IES)作为能源转型中的重要环节已得到越来越多国家的广泛关注。构建一套匹配中国国情的综合能源系统评价体系和评价方法不仅能够为综合能源系统规划后评价打下基础,以此对规划方案进行优劣排序;...综合能源系统(integrated energy system,IES)作为能源转型中的重要环节已得到越来越多国家的广泛关注。构建一套匹配中国国情的综合能源系统评价体系和评价方法不仅能够为综合能源系统规划后评价打下基础,以此对规划方案进行优劣排序;还能够提高综合能源系统项目的管理水平,在制定统一、完整的综合能源系统综合评价标准时提供参考。为此,首先结合园区IES基本特征以及运行特性,构建包含经济性、可靠性、环保性以及智能友好性4个方面的综合评价指标体系;然后为解决IES在运行中的不确定性问题,对基于传统云物元模型的综合评价体系提出云熵优化,即考虑不同评价者对模糊性的可接受程度;为解决单一赋权方法可能导致的评价结果过于主观或过于客观的问题,选择基于最小鉴别信息原理将决策实验室法与熵权法相结合的综合赋权法,并采用变权法进一步完善综合评价指标;最后通过算例分析,验证所提综合评价体系的科学正确性。展开更多
缆式焊丝熔化极气体保护电弧焊(gas metal arc welding,GMAW)中存在的焊缝截面侧偏现象会导致焊接接头熔合不良,基于熔滴受力分析和最小电压理论对焊缝截面侧偏现象的变化规律进行机理分析.结果表明,电流是影响截面侧偏的关键因素,由于...缆式焊丝熔化极气体保护电弧焊(gas metal arc welding,GMAW)中存在的焊缝截面侧偏现象会导致焊接接头熔合不良,基于熔滴受力分析和最小电压理论对焊缝截面侧偏现象的变化规律进行机理分析.结果表明,电流是影响截面侧偏的关键因素,由于缆式焊丝独特的绞合结构引起电弧旋转,进而导致出现熔滴受力不均的现象,熔滴过渡方向与焊丝轴线存在夹角,在熔滴冲击力的作用下导致焊缝截面出现侧偏现象,随着电流的增加,电弧对熔滴的拘束增强,熔滴过渡方向逐渐趋于轴线,因而焊缝截面侧偏的趋势随着电流增加而减小.展开更多
基金Beijing Municipal Commission of Education Project(XK100070530)
文摘Based on the stability criteria of workpiece-fixture system, quantitative optimization of clamping forces during precise machining process for thin walled part is studied considering the contact condition between wokpiece and locator, the contact mechanical model is achieved, which is further been used to calculate the entire passive forces acting on the statically undetermined workpiece by means of the force screw theory as well as minimum norm force principle. Furthermore, a new methodology to optimize clamping forces is put forward, on the criteria of keeping the stability of workpiece during cutting process. By this way, the intensity of clamping forces is decreased dramatically, which will be most beneficial for improving the machining quality of thin-walled parts. Finally, a case study is used to support and validate the proposed model.
文摘In this paper the conception of theoretical determine the relations between material experimental characteristics is presented. On the base of stress-strain relations for nonlinear elastic anisotropic material and geometrical interpretation of deformation state, the general form of strain energy density function was introduced. Using this function and variational methods the relations between material characteristics were achieved. All considerations are illustrated by a short theoretical example.
基金supported by the National Natural Science Foundation of China(Grant No.41925030)the Nyingchi National Sustainable Development Experimental Zone Project(2023-SYQ-007)+1 种基金the Chinese Academy of Sciences Light of West China Programthe Science and Technology Research Program of Institute of Mountain Hazards and Environment,Chinese Academy of Sciences(Grant No.IMHE-ZDRW-02).
文摘The geomorphic minimum energy dissipation principle is important in the development of gully evolutionary theory.The impact of debris flows on channels during movement also adheres to this theory.A minimum energy dissipation model for debris flows has been obtained from previous studies,which is derived from the flow rules of runoff along a channel under rainfall or ice-snow meltwater conditions.However,the lack of consideration for erosion characteristics has hindered a comprehensive understanding of the movement characteristics of debris flow.In this paper,the phenomenon of volume increase resulting from the entrainment along debris flow movement is considered in order to derive a model for the mean velocity,reflecting the minimum energy dissipation principle.The entire expression of the mean velocity model is determined through 38 typical glacial and rainstorm debris flow cases.To evaluate the reliability of the proposed model,we employed 164 monitoring data from 1995 to 2000 in the Jiangjia gully,Yunnan,China.The results show that the velocity calculated by the proposed model are highly correlated with those obtained from the monitoring data.Additionally,a comparison is made between the mean velocities calculated by the proposed model and those obtained from previous studies,highlighting the exceptional applicability of the proposed model.This study will contribute to reveal the movement laws of debris flow along the channel.
文摘This paper presents not only practical but also instructive mathematical models to simulate tree network formation using the Poisson equation and the Finite Difference Method (FDM). Then, the implications for entropic theories are discussed from the viewpoint of Maximum Entropy Production (MEP). According to the MEP principle, open systems existing in the state far from equilibrium are stabilized when entropy production is maximized, creating dissipative structures with low entropy such as the tree-shaped network. We prepare two simulation models: one is the Poisson equation model that simulates the state far from equilibrium, and the other is the Laplace equation model that simulates the isolated state or the state near thermodynamic equilibrium. The output of these equations is considered to be positively correlated to entropy production of the system. Setting the Poisson equation model so that entropy production is maximized, tree network formation is advanced. We suppose that this is due to the invocation of the MEP principle, that is, entropy of the system is lowered by emitting maximal entropy out of the system. On the other hand, tree network formation is not observed in the Laplace equation model. Our simulation results will offer the persuasive evidence that certifies the effect of the MEP principle.
文摘综合能源系统(integrated energy system,IES)作为能源转型中的重要环节已得到越来越多国家的广泛关注。构建一套匹配中国国情的综合能源系统评价体系和评价方法不仅能够为综合能源系统规划后评价打下基础,以此对规划方案进行优劣排序;还能够提高综合能源系统项目的管理水平,在制定统一、完整的综合能源系统综合评价标准时提供参考。为此,首先结合园区IES基本特征以及运行特性,构建包含经济性、可靠性、环保性以及智能友好性4个方面的综合评价指标体系;然后为解决IES在运行中的不确定性问题,对基于传统云物元模型的综合评价体系提出云熵优化,即考虑不同评价者对模糊性的可接受程度;为解决单一赋权方法可能导致的评价结果过于主观或过于客观的问题,选择基于最小鉴别信息原理将决策实验室法与熵权法相结合的综合赋权法,并采用变权法进一步完善综合评价指标;最后通过算例分析,验证所提综合评价体系的科学正确性。
文摘缆式焊丝熔化极气体保护电弧焊(gas metal arc welding,GMAW)中存在的焊缝截面侧偏现象会导致焊接接头熔合不良,基于熔滴受力分析和最小电压理论对焊缝截面侧偏现象的变化规律进行机理分析.结果表明,电流是影响截面侧偏的关键因素,由于缆式焊丝独特的绞合结构引起电弧旋转,进而导致出现熔滴受力不均的现象,熔滴过渡方向与焊丝轴线存在夹角,在熔滴冲击力的作用下导致焊缝截面出现侧偏现象,随着电流的增加,电弧对熔滴的拘束增强,熔滴过渡方向逐渐趋于轴线,因而焊缝截面侧偏的趋势随着电流增加而减小.
