Phase-field simulation of forced flow effect on random preferred growth direction of multiple grains

The random distribution problem of dendrite preferred growth direction was settled by random grid method.This method was used to study the influence of forced laminar flow effect on multiple grains during solidification.Taking high pure succinonitrile （SCN） undercooled melt as an example,the forced laminar flow effect on multiple grains was studied by phase-field model of single grain which coupled with flow equations at non-isothermal condition.The simulation results show that the random grid method can reasonably settle the problem of random distribution and is more effective.When the solid fraction is relatively low,melt particles flow around the downstream side of dendrite,and the flow velocity between two dendrite arms becomes high.At the stage of solidification time less than 1800Δt,every dendrite grows freely;the upstream dendrites are stronger than the downstream ones.The higher the melt flow rate,the higher the solid fraction.However,when the solid fraction is relatively high,the dendrite arm intertwins and only a little residual melt which is not encapsulated can flow;the solid fraction will gradually tend to equal to solid fraction of melt without flow.

Fabrication of TiO_2(B)/anatase heterophase junctions in nanowires via a surface-preferred phase transformation process for enhanced photocatalytic activity

Heterojunction fabrication is one of the most effective strategies for enhancing the photocatalytic performance of semiconductor photocatalysts. Here, TiO2（B）/anatase nanowires with interfacial heterostructures were prepared through a three-step synthesis method, including hydrothermal treatment, H＋ exchange, and annealing. The phase structures of the nanowires in the bulk and on the surface during the annealing process were monitored by XRD and UV-Raman spectroscopy, respectively. SEM and TEM results indicate that the TiO2（B） nanowires partially collapse and transform into anatase during the annealing process and the heterophase junction structure is formed simultaneously. On the basis of the phase structure together with morphology data, a phase-transformation mechanism was proposed. Photocatalytic activity was evaluated by hydrogen production and pollutant-degradation assays. The optimized structure of the photocatalyst contains 24% TiO2（B） in the bulk and 100% anatase on the surface. The charge-carrier behavior during the photocatalytic process was investigated by photocurrent, electrochemical impedance spectroscopy（EIS）, and photoluminescence（PL） spectroscopy, which revealed that the heterophase-junction structure in the bulk was responsible for the highly efficient charge separation and transportation, etc.; the anatase on the surface took control of the high surface-reaction activity.

Preferred Orientation in Nanocomposite Permanent Magnet Materials

Melt-spun （Nd11.4Fe82.9B5.7）0.99M1 ribbons （M = Zr, Nb, Ga, Zr＋ Ga, Nb ＋ Ga）were prepared by melt-spinning technique. Ga addition is found to be effective for the orientation of c-axis of Nd2Fe14B grains perpendicular to the ribbon plane. Better magnetic properties can be achieved by adding both the two kinds of elements Zr ＋ Ga, Nb ＋ Ga, and it is found that the preferred orientation is further improved. The alignment degree changes with ribbon thickness and is highest when ribbon thickness is 120 μm. Heat treatment can improve the texture degree, but lead to coarser grains. Cryogenic treatment is first applied for the treatment of nanocomposite Nd2Fe14B/α-Fe melt-spun ribbons. The effects on magnetic properties and texture degree of nanocomposite magnets after cryogenic treatment were studied. The result shows that cryogenic treatment is beneficial to the enhancement of texture degree of melt-spun ribbon and the grain size has no obvious change.

Relationship between crystal growth mode, preferred orientation and magnetostriction of (Tb_(0.3)Dy_(0.7))Fe_(1.95) alloys

The relationship between crystal growth mode, preferred orientation and magnetostrictive properties of （Tb0.3Dy0.7）Fe1.95 alloys was investigated at different directional solidification rates. The results showed that preferred orientation had a strong influence on the characteristics of （Tb0.3Dy0.7）Fe1.95 alloys. At lower solidification rates, the sample with 〈110〉 preferred orientation showed larger low-field magnetostriction and apparent compressive stress effect. The excessive solidification rate resulted in failure of preferred orientation and a poor magnetostrictive performance. With an increase in solidification rates, the crystal growth modes changed gradually from cellular and primary dendrite morphology to developed dendritic morphology. In addition, domain configurations were observed using magnetic force microscopy, and the change of magnetostrictive properties was interpreted in terms of revealing the domain configurations.

A PMU data recovering method based on preferred selection strategy

Nowadays, the technology of renewable sources grid-connection and DC transmission has a rapid development. And phasor measurement units(PMUs) become more notable in power grids, due to the necessary of real time monitoring and close-loop control applications. However, the PMUs data quality issue affects applications based on PMUs a lot. This paper proposes a simple yet effective method for recovering PMU data. To simply the issue, two different scenarios of PMUs data loss are first defined. Then a key combination of preferred selection strategies is introduced. And the missing data is recovered by the function of spline interpolation. This method has been tested by artificial data and field data obtained from on-site PMUs. The results demonstrate that the proposed method recovers the missing PMU data quickly and accurately. And it is much better than other methods when missing data are massive and continuous. This paper also presents the interesting direction for future work.

Analysis on Preferred Flowing Path in Shallow Water Delta Front Based on Reservoir Architecture

1 Introduction The shallow water delta reservoir in South Wen 79Block is in the stage of high water-cut stages,and is still on the rise.The degree of recovery is low,preferredflowing path is developed and surplus oil is generally distributed with local enrichment(Zhang,2009).The potential of surplus oil is considerable,while the difficulty is also great.And the basis of effective tapping for

Formation and preferred growth behavior of grooved seed silicon substrate for kerfless technology

Kerfless technology is a promising alternative for reducing cost and providing flexible thin crystals in silicon-based semiconductors. In this work we propose a protruded seed substrate technology to prepare flexible monocrystalline Si thin film economically. Grooved seed substrate is fabricated by using SiNx thin film as a mask for the wet-etching and thermal oxidation process. After the SiNx layer on the wedged strip is removed by hot phosphoric acid, the pre-defined structured substrate is achieved with the top of the strip serving as the seed site where there is no oxide layer. And a preferred growth of epitaxial Si on the substrate is performed by introducing an intermittent feed method for silicon source gas. The technique in this paper obviously enhances the mechanical stability of the seed structure and the growth behavior on the seed sites, compared with our previous techniques, so this technique promises to be used in the industrial fabrication of flexible Si-based devices.

ELECTRO－OXIDATION OF ETHANOL ON HIGHLY PREFERRED ORIENTATION NICKEL ELECTRODE IN NaOH

The electro-oxidation of ethanol on a highly preferred orientation (220) Ni electrode and alower texture degree Ni electrode in 1 mol/L NaoH was investigated with cyclicvoltammetry. The mechanism of ethanol oxidation on the highly preferred orientation Nielectrode is proposed. It is shown that the current peak of electro-oxidation of ethanol onthe highly preferred orientation (220) Ni electrode is much higher than that of the lowertextUre degree (220) Ni electrode, Ni(Ⅲ) on the surface of the highly preferredorientation(220)Ni electrode is responsible for the oxidation ethanol.

Fabrication and characterization of high density LaB_(6) polycrystalline with(100) preferred orientation

High density lanthanum hexaboride(LaB_(6))polycrystalline with(100)preferred orientation was prepared by spark plasma sintering(SPS)using LaB_(6) nanocubes as raw materials in this work.Microstructure and thermionic electron emission property of LaB_(6) polycrystalline were investigated detailedly.The results show that the LaB_(6) polycrystalline had a relative density of 95.8%,and there was a(100)preferred orientation on its surface normal to SPS pressing direction.The work function of LaB_(6) polycrystalline normal surface was only 2.73 eV,which was almost close to the theoretical work function of LaB_(6)(100)single crystal surface.The reasons for preferential orientation of LaB_(6) polycrystalline were analyzed.

Efficient Preparation of Nanoparticle-Reinforced Nickel-based Composite Coating with Highly Preferred(220)Orientation

Nanoparticle-reinforced metal matrix composite coatings have significant potential in mechanical part surface strengthening owing their excellent mechanical properties.This paper reports a phenomenon in which the grain orientation gradually evolves to(220)as the deposition current density increases when preparing nanoparticle-reinforced nickel-based composite coatings through jet electrodeposition(JED).During the preparation of the Ni-SiC composite coatings,the deposition current density increased from 180 A/dm2 to 220 A/dm2,and TC(220)gradually increase from 41.4%to 97.7%.With an increase of TC(220),the self-corrosion potential increases from−0.575 to−0.477 V,the corrosion current density decreases from 9.52μA/cm^2 to 2.76μA/cm^2,the diameter of the corrosion pits that after 10 days of immersion in a 3.5 wt%NaCl solution decreases from 278–944 nm to 153–260 nm,and the adhesion of the coating increases from 24.9 N to 61.6 N.Compared a conventional electrodeposition(CED),the Ni-SiC composite coating using JED has the advantages of a smooth surface morphology,high corrosion resistance,and strong adhesion,which are more obvious with an increase in TC(220).

PREFERRED ORIENTATION OF DEPOSITED TiC COATING ON STEEL BY CVD

Investigation was made of the deposited rate,surface morphology and crystal pre- ferred orientation of the dense TiC coating onto austenitic stainless steel in relation with CH_4/TiCl_4 mole ratio and temperature adopted in CVD processing. When the CH_4/TiCl_4 ratio is low or high,the preferred orientation may be(220)or(200),respec- tively,which is mainly dependent on the equilibrium concentration of active C in vapour phase.

Exploration of Water Resource and Multiple Model for Water Resource Development in Karst Areas with the Preferred Plane Theory

According to the theory of preferred plane, preferred planes (faults) alwayscontrol the distribution of bedrock fissure water and hold abundant groundwater. Thus, theexploration of fissure or karst water can be converted into searching for the watery preferred plane(WPP). In the paper, the characteristic of watery preferred planes is analyzed and a series ofsuperior indices has been set up. It is introduced that WPPs are determined by the methods ofgeological analysis, superior index and complex geophysical analysis. Meanwhile, new multiple modelfor water resource development in the water-scarce areas of karst mountainous regions are advanced.

Environmental Embrittlement and Preferred Orientation of Cold-Rolled and Annealed Fe_3 (Al,Cr,Zr) Alloy at Ambient Temperature

The room temperature tensile properties of cold rolled and annealed Fe 3(Al,Cr,Zr) alloy are similar to those of warm rolled Fe 3Al alloys. The cold rolled Fe 3(Al,Cr,Zr) alloy is also susceptible to test environments. It has been shown that the ductility in various environments decreases in sequence of oxygen—oil—air—distilled water. The results of X ray diffraction analysis show that (211) preferred orientation of B 2 phase appears in cold rolled Fe 3(Al,Cr,Zr) alloy after recrystallization annealing.

The Actual versus Preferred Retirement Ages(Percentage distribution)

ＴｈｅＡｃｔｕａｌｖｅｒｓｕｓＰｒｅｆｅｒｒｅｄＲｅｔｉｒｅｍｅｎｔＡｇｅｓ（Ｐｅｒｃｅｎｔａｇｅｄｉｓｔｒｉｂｕｔｉｏｎ）Ｔｈｅａｃｔｕａｌｒｅｔｉｒｅｍｅｎｔａｇｅｍａｙｄｉｆｆｅｒｆｒｏｍｔｈｅｎｏｒｍｅｓｔａｂｌｉｓｈｅｄｂｙｎａｔｉｏｎａｌ...

Change in stature by walking and running at a preferred transition speed

This study aimed to measure stature changes during and after walking and running at a preferred transition speed (PTS) and the recovery period, and to examine differences caused by loads imposed on the spinal column. Seven males and three females aged 22-41 years took part in this study. Subjects The subjects underwent 15 minutes of walking or running on a treadmill in a random order. Stature changes were measured during each exercise at intervals of 5 minutes and after a 20 minute standing recovery period within units of 0.01 mm. Two- way ANOVA revealed that both main factors, gait (F = 5.250, P < 0.05) and elapsed time (F = 14.409, P < 0.05), had a significant effect on stature. In the post hoc test, stature shrank with time and its loss was found to be greater in running than in walking, but recovered after both exercises. In conclusion, the spinal load increases with time during both walking and running at PTS, but is greater in running than in walking. After both exercises, spinal shrinkage shows a similar recovery process and recovers faster in walking to its pre-exercise level.

The Relation between the Preferred Chewing Side and Occlusal Force Measured by T-Scan III System

Occlusal force has the main role in determining the teeth health in general and determining the chewing, muscle and TMJ function. The objective of this study was to find if there was any relation between the preferred chewing side and the force, measured by T-scan III system. The total number of 90 (46 female and 44 male) dental students was included in this study. They were asked whether their preferred chewing side was right, left or both. Afterwards, the occlusal forces in habitual occlusion, using T-Scan III Electronic device (IP-CO position mode, MA-mode, MA sensitivity setting) were measured. The data were presented as Mean ± SD. Spearman correlation was used to find the correlation between the occlusal force and chewing side. Differences in P 0.05) and the right side (r = 0.143, P > 0.05) according to the preferred chewing side. In this study, the relation between the preferred chewing side and occlusal force was found.

On preferred and dispreferred second turns in interaction

Conversation analysis （CA） is an integral part of the study of language in communication, in which preference organization is an important topic for pragmatic research. This paper makes a study of preferred and dispreferred second turns in naturally occurring interactions to show structurally expected or unexpected responses from the second parts of the adjacent pairs. The study is based on the analysis of examples of people＇s actual conversations. It is concluded that in actual conversations, the speaker may make a preferred or dispreferred answer in either marked or unmarked form according to the speaker＇s intention and conversation circumstances.

Successful Detection of a Preferred Frame Using Eclipses of Jupiter’s Moon Io

In this paper tests by Maxwell and Gift that search for a preferred frame or ether arising from movement through that frame using Jupiter’s moon Io are reviewed and discussed. Unlike the Michelson-Morley second-order experiment which unsuccessfully attempted to detect the orbital motion of the Earth relative to the ether, these tests are both first-order and therefore are unaffected by the second-order effects of length contraction and clock retardation. The test by Maxwell utilizes the delay in the eclipse of Io as the Earth orbits the Sun in an attempt to detect ether drift resulting from the galactic movement of the Sun. This test requires a 6-year duration for its full execution and was never performed because of practical difficulties. The test first presented by Gift can be conducted over a few days and employs the observed variation of the period of Io as the Earth moves toward or away from Jupiter. The result is a positive detection of ether drift arising from the orbital motion of the Earth. The detected ether drift is evidence of a preferred frame which we argue corresponds to the solar system barycentric or sun-centered inertial (SCI) frame.

Preferred practice guidelines for retinopathy of prematurity screening during the COVID-19 pandemic

Retinopathy of prematurity(ROP)is the leading cause of preventable infant blindness in the world and predominantly affects babies who are born low birth weight and premature.India has the largest number of surviving preterm births born annually.ROP blindness can be largely prevented if there is a robust screening program which detects treatment requiring disease in time.ROP treatment must be provided within 48 h of reaching this threshold of treatment making it a relative emergency.During the severe acute respiratory syndromecoronavirus disease 2019 pandemic in 2020 ROP screening was disrupted throughout the world due to lockdowns and restriction of movement of these infants,their families,specialists and healthcare workers.The Indian ROP Society issued guidelines for ROP screening and treatment in March 2020,which was aimed at preserving the chain-of-care despite the potential limitations and hazards during the(ongoing)pandemic.This preferred practice guideline is summarized in this manuscript.