Tailored multifunctional hydrazine derivatives for efficient printable hole-conductive-free mesoscopic perovskite solar cells via enhancing defect passivation

The low-cost and easy large-scale fabrication advantages of printable mesoscopic perovskite solar cells(p-MPSCs)are overshadowed by their limited photovoltaic conversion efficiency(PCE).Here,we introduce the hydrazide derivative of 4-Hydroxybenzoylhydrazine(4-HBH)to improve the PCE of p-MPSCs by inducing enhanced defect passivation.Both carbonyl and hydrazine groups in hydrazide groups present strong interaction with perovskite.The hydroxyl group,as an electron donor group,increases the electron cloud density of the hydrazide group in 4-HBH under the conjugation of the benzene ring,and thus enhances its interaction with perovskite.Additionally,the hydroxy group itself interacts with perovskite and passivates defects synergistically.The hydrazine agents can also reduce I2and suppress the loss of iodine in perovskite films,which inhibits the formation of iodine-related defects.Consequently,p-MPSCs with 4-HBH achieve a high PCE of 19.21%,and present well improved stability.

Printable organic light-emitting diodes for next-generation visible light communications:a review

Visible light communication(VLC)is an emerging technology employing light-emitting diodes(LEDs)to provide illumination and wireless data transmission simultaneously.Harnessing cost-efficient printable organic LEDs(OLEDs)as environmentally friendly transmitters in VLC systems is extremely attractive for future applications in spectroscopy,the internet of things,sensing,and optical ranging in general.Here,we summarize the latest research progress on emerging semiconductor materials for LED sources in VLC,and highlight that OLEDs based on nontoxic and cost-efficient organic semiconductors have great opportunities for optical communication.We further examine efforts to achieve high-performance white OLEDs for general lighting,and,in particular,focus on the research status and opportunities for OLED-based VLC.Different solution-processable fabrication and printing strategies to develop high-performance OLEDs are also discussed.Finally,an outlook on future challenges and potential prospects of the next-generation organic VLC is provided.

Designing Tough,Printable,and Adaptable Eutectogels with Multinetworks via Synergy of Rapid Orthogonal Photopolymerizations and Solvent Effect in Seconds

Achieving a straightforward design of tough,printable,and adaptable polymeric eutectogels is still challenging in related fields due to the uncontrollable polymerization and solvent-exchanging processes,and inherent contrasting multiple networks.Here,we report a one-step synergistic strategy based on ruthenium chemistry-catalyzed photopolymerization and solvent effect for preparing high-performance eutectogels.This orthogonal ruthenium photochemistry helps multinetworks formation via phenol-coupling of gelatin and copolymerization of acrylamide(AAm)and[2-(methacryloyloxy)ethyl]trimethylammonium tetrafluoroborate(META)monomers in seconds.The obvious difference in the supramolecular interactions of free AAm monomers and polymerized units in P(AAm-co-META)with deep eutectic solvents(DESs)significantly promotes the microphase-separation behavior in eutectogels.Consequently,the in situ polymerization and microphase-separation behavior enable the as-prepared eutectogel materials to have excellent mechanical properties(stress of∼1.2 MPa),toughness(∼4.0 MJ m^(−3)),elasticity,adaptivity,and conductivity(∼0.5 S m^(−1)at room temperature).Also,the critical strength of the resultant eutectogels can be modulated by varying the DES constituents.This rapid and well-controlled synergistic approach is compatible with extrusion printing techniques to make flexible sensors with high sensitivities and response times to detect pressure in a range of 0–500 kPa.Such a general and simple strategy has application potential in biological,engineering,and material sciences.

Homogeneous permeation and oriented crystallization in nanostructured mesopores for efficient and stable printable mesoscopic perovskite solar cells

The low-cost and scalable printable mesoporous perovskite solar cells(p-MPSCs) face significant challenges in regulating perovskite crystal growth due to their nanoscale mesoporous scaffold structure, which limits the improvement of device power conversion efficiency(PCE). In particular, the most commonly used solvents, N,N-dimethylformamide(DMF) and dimethyl sulfoxide(DMSO), have a single chemical interaction with the precursor components and high volatility, which is insufficient to self-regulate the perovskite crystallization process, leading to explosive nucleation and limited growth within mesoporous scaffolds. Here, we report a mixed solvent system composed of methylamine formaldehyde(MAFa)-based ionic liquid and acetonitrile(ACN) with the strong C=O–Pb coordination and N–H···I hydrogen bonding with perovskite components. We found that the mixed solvent system is beneficial for the precursor solution to homogeneously penetrate into the mesoporous scaffold,and the strong C=O–Pb coordination and N–H···I hydrogen bonding interaction can promote the oriented growth of perovskite crystals. This synergistic effect increased the PCE of the p-MPSCs from 17.50% to 19.21%, which is one of the highest records for p-MPSC in recent years. Additionally, the devices exhibit positive environmental stability, retaining over 90% of the original PCE after 1,200 h of aging under AM 1.5 illumination conditions at 55 ℃ and 55% humidity.

Phase separation and domain crystallinity control enable open-air-printable highly efficient and sustainable organic photovoltaics

Organic solar cells(OSCs)have emerged as a promising solution for sustainable energy production,offering advantages such as a low carbon footprint,short energy payback period,and compatibility with eco-solvents.However,the use of hazardous solvents continues to dominate the best-performing OSCs,mainly because of the challenges of controlling phase separation and domain crystallinity in eco-solvents.In this study,we combined the solvent vapor treatment of CS2 and thermal annealing to precisely control the phase separation and domain crystallinity in PM6:M-Cl and PM6:O-Cl systems processed with the eco-solvent o-xylene.This method resulted in a maximum power conversion efficiency(PCE)of 18.4%,which is among the highest values reported for sustainable binary OSCs.Furthermore,the fabrication techniques were transferred from spin coating in a nitrogen environment to blade printing in ambient air,retaining a PCE of 16.0%,showing its potential for high-throughput and scalable production.In addition,a comparative analysis of OSCs processed with hazardous and green solvents was conducted to reveal the differences in phase aggregation.This work not only underscores the significance of sustainability in OSCs but also lays the groundwork for unlocking the full potential of open-air-printable sustainable OSCs for commercialization.

A low-cost, printable, and stretchable strain sensor based on highly conductive elastic composites with tunable sensitivity for human motion monitoring

Strain sensors with high stretchability, broad strain range, high sensitivity, and good reliability are desirable, owing to their promising applications in electronic skins and human motion monitoring systems. In this paper, we report a high- performance strain sensor based on printable and stretchable electrically con- ductive elastic composites. This strain sensor is fabricated by mixing silver-coated polystyrene spheres （PS@Ag） and liquid polydimethylsiloxane （PDMS） and screen-printed to a desirable geometry. The strain sensor exhibits fascinating comprehensive performances, including high electrical conductivity （1.65 × 104 S/m）, large workable strain range （〉 80%）, high sensitivity （gauge factor of 17.5 in strain of 0%-10%, 6.0 in strain of 10%-60% and 78.6 in strain of 60%-80%）, inconspicuous resistance overshoot （〈 15%）, good reproducibility and excellent long-term stability （1,750 h at 85℃/85% relative humidity） for PS@Ag/PDMS-60, which only contains - 36.7 wt.% of silver. Simultaneously, this strain sensor provides the advantages of low-cost, simple, and large-area scalable fabrication, as well as robust mechanical properties and versatility in applications. Based on these performance characteristics, its applications in flexible printed electrodes and monitoring vigorous human motions are demonstrated, revealing its tremendous potential for applications in flexible and wearable electronics.

Printable SnO2 cathode interlayer with up to 500 nm thickness-tolerance for high-performance and large-area organic solar cells

The printable electrode interlayer with excellent thickness tolerance is crucial for mass production of organic solar cells(OSCs)by solution-based print techniques. Herein, high-quality printable SnO2 films are simply fabricated by spin-coating or bladecoating the chemical precipitated SnO2 colloid precursor with post thermal annealing treatment. The SnO2 films possess outstanding optical and electrical properties, especially extreme thickness-insensitivity. The interfacial electron trap density of SnO2 cathode interlayers(CILs) are very low and show negligible increase as the thicknesses increase from 10 to 160 nm,resulting in slight change of the power conversion efficiencies(PCEs) of the PM6:Y6 based OSCs from 16.10% to 13.07%. For blade-coated SnO2 CIL, the PCE remains high up to 12.08% even the thickness of SnO2 CIL is high up to 530 nm. More strikingly, the large-area OSCs of 100 mm2 with printed SnO2 CILs obtain a high efficiency of 12.74%. To the best of our knowledge, this work presents the first example for the high-performance and large-area OSCs with the thickness-insensitive SnO2 CIL.

Printable elastic silver nanowire-based conductor for washable electronic textiles

Printable elastic conductors promote the wide application of consumable electronic textiles (e-textiles) for pervasive healthcare monitoring and wearable computation. To assure a clean appearance, the e-textiles require a washing process to clean up the dirt after daily use. Thus, it is crucial to develop low-cost printable elastic conductors with strong adhesion to the textiles. Here, we report a composite elastic conductor based on Ag nanowires (NWs) and polyurethane elastomer. The composite could be dispersed into ink and easily printed onto textiles. One-step print could form robust conductive coatings without sealing on the textiles. Interestingly, the regional concentration of Ag NWs within the polyurethane matrix was observed during phase inversion, endowing the elastic conductor with a low percolation threshold of 0.12 vol.% and high conductivity of 3,668 S·cm^−1. Thanks to the high adhesion of the elastic conductors, the resulted e-textiles could withstand repeated stretching, folding, and machine washing (20 times) without obvious performance decay, which reveals its potential application in consumable e-textiles.

Influence of precursor concentration on printable mesoscopic perovskite solar cells

Over the last decade,the power conversion efficiency of hybrid organic-inorganic perovskite solar cells(PSCs)has increased dramatically from 3.8%to 25.2%.This rapid progress has been possible duc to the accurate control of the morphology and crystallinity of solution-processed perovskites,which are significantly affected by the concentration of the precursor used.This study explores the influence of precursor concentrations on the performance of printable hole-conductor-free meso-scopic PSCs via a simple one-step drop-coating method.The results reveal that lower concentrations lead to larger grains with inferior pore flling,while higher concentra-tions result in smaller grains with improved pore filling.Among concentrations ranging from 0.241.20M,devices based on a moderate strength of 0.70M were confirmed to exhibit the best efficiency at 16.32%.

Stability of three-dimensional printable foam concrete as function of surfactant characteristics

Extrudability is one of the most critical factors when designing three-dimensional printable foam concrete.The extrusion process likely affects the foam stability which necessitates the investigation into surfactant properties particularly for concrete mixes with high foam contents.Although many studies have been conducted on traditional foam concrete in this context,studies on three-dimensional printed foam concrete are scarce.To address this research gap,the effects of surfactant characteristics on the stability,extrudability,and buildability of three-dimensional printed foam concrete mixes with two design densities(1000 and 1300 kg/m^(3))using two different surfactants and stabilizers(synthetic-based sodium lauryl sulfate stabilized with carboxymethyl cellulose sodium salt,and natural-based hingot surfactant stabilized with xanthan gum)were investigated in this study.Fresh density tests were conducted before and after the extrusion to determine stability of the foam concrete.The results were then correlated with surfactant qualities,such as viscosity and surface tension,to understand the importance of key parameters in three-dimensional printing of foam concrete.Based on the experimental results,surfactant solu1tion with viscosity exceeding 5 m Pa·s and surface tension lower than 31 mN/m was recommended to yield stable three-dimensional printable foam concrete mixes.Nevertheless,the volume of foam in the mix significantly affected the printability characteristics.Unlike traditional foam concrete,the variation in the stabilizer concentration and density of concrete were found to have insignificant effect on the fresh-state-characteristics(slump,slump flow,and static yield stress)and air void microstructure of the stable mixes.

Organic X-Ray Image Sensors Using a Medium Bandgap Polymer Donor with Low Dark Current

The development of portable X-ray detectors is necessary for diagnosing fractures in unconscious patients in emergency situations.However,this is quite challenging because of the heavy weight of the scintillator and silicon photodetectors.The weight and thickness of X-ray detectors can be reduced by replacing the silicon layer with an organic photodetectors.This study presents a novel bithienopyrroledione-based polymer donor that exhibits excellent photodetection properties even in a thick photoactive layer(~700 nm),owing to the symmetric backbone and highly soluble molecular structure of bithienopyrroledione.The ability of bithienopyrroledione-based polymer donor to strongly suppress the dark current density(Jd~10−10 A cm^(−2))at a negative bias(−2.0 V)while maintaining high responsivity(R=0.29 A W−1)even at a thickness of 700 nm results in a maximum shot-noise-limited specific detectivity of D_(sh)^(*)=2.18×10^(13)Jones in the organic photodetectors.Printed organic photodetectors are developed by slot-die coating for use in X-ray detectors,which exhibit D_(sh)^(*)=2.73×10^(12)Jones with clear rising(0.26 s)and falling(0.29 s)response times upon X-ray irradiation.Detection reliability is also proven by linear response of the X-ray detector,and the X-ray detection limit is 3 mA.

Alloy design for laser powder bed fusion additive manufacturing:a critical review

Metal additive manufacturing(AM)has been extensively studied in recent decades.Despite the significant progress achieved in manufacturing complex shapes and structures,challenges such as severe cracking when using existing alloys for laser powder bed fusion(L-PBF)AM have persisted.These challenges arise because commercial alloys are primarily designed for conventional casting or forging processes,overlooking the fast cooling rates,steep temperature gradients and multiple thermal cycles of L-PBF.To address this,there is an urgent need to develop novel alloys specifically tailored for L-PBF technologies.This review provides a comprehensive summary of the strategies employed in alloy design for L-PBF.It aims to guide future research on designing novel alloys dedicated to L-PBF instead of adapting existing alloys.The review begins by discussing the features of the L-PBF processes,focusing on rapid solidification and intrinsic heat treatment.Next,the printability of the four main existing alloys(Fe-,Ni-,Al-and Ti-based alloys)is critically assessed,with a comparison of their conventional weldability.It was found that the weldability criteria are not always applicable in estimating printability.Furthermore,the review presents recent advances in alloy development and associated strategies,categorizing them into crack mitigation-oriented,microstructure manipulation-oriented and machine learning-assisted approaches.Lastly,an outlook and suggestions are given to highlight the issues that need to be addressed in future work.

Review on laser directed energy deposited aluminum alloys

Lightweight aluminum(Al)alloys have been widely used in frontier fields like aerospace and automotive industries,which attracts great interest in additive manufacturing(AM)to process high-value Al parts.As a mainstream AM technique,laser-directed energy deposition(LDED)shows good scalability to meet the requirements for large-format component manufacturing and repair.However,LDED Al alloys are highly challenging due to their inherent poor printability(e.g.low laser absorption,high oxidation sensitivity and cracking tendency).To further promote the development of LDED high-performance Al alloys,this review offers a deep understanding of the challenges and strategies to improve printability in LDED Al alloys.The porosity,cracking,distortion,inclusions,element evaporation and resultant inferior mechanical properties(worse than laser powder bed fusion)are the key challenges in LDED Al alloys.Processing parameter optimizations,in-situ alloy design,reinforcing particle addition and field assistance are the efficient approaches to improving the printability and performance of LDED Al alloys.The underlying correlations between processes,alloy innovation,characteristic microstructures,and achievable performances in LDED Al alloys are discussed.The benchmark mechanical properties and primary strengthening mechanism of LDED Al alloys are summarized.This review aims to provide a critical and in-depth evaluation of current progress in LDED Al alloys.Future opportunities and perspectives in LDED high-performance Al alloys are also outlined.

Printability disparities in heterogeneous material combinations via laser directed energy deposition:a comparative study

Additive manufacturing provides achievability for the fabrication of bimetallic and multi-material structures;however,the material compatibility and bondability directly affect the parts’formability and final quality.It is essential to understand the underlying printability of different material combinations based on an adapted process.Here,the printability disparities of two common and attractive material combinations(nickel-and iron-based alloys)are evaluated at the macro and micro levels via laser directed energy deposition(DED).The deposition processes were captured using in situ high-speed imaging,and the dissimilarities in melt pool features and track morphology were quantitatively investigated within specific process windows.Moreover,the microstructure diversity of the tracks and blocks processed with varied material pairs was comparatively elaborated and,complemented with the informative multi-physics modeling,the presented non-uniformity in mechanical properties(microhardness)among the heterogeneous material pairs was rationalized.The differences in melt flow induced by the unlike thermophysical properties of the material pairs and the resulting element intermixing and localized re-alloying during solidification dominate the presented dissimilarity in printability among the material combinations.This work provides an in-depth understanding of the phenomenological differences in the deposition of dissimilar materials and aims to guide more reliable DED forming of bimetallic parts.

Surface activation of viscose textiles via air,argon,and oxygen dielectric barrier discharge plasma:influence of peak voltage

This paper discusses the use of atmospheric pressure dielectric barrier discharge(DBD)plasma treatment to enhance the surface qualities of viscose fabrics.The study explores the effects of different plasma gases,discharge voltages,and exposure times on the treated fabrics.The findings emphasize the importance of optimizing the plasma's peak voltage to achieve the desired surface treatment outcomes.The document also presents data on colour strength,wettability,colour fastness,and tensile strength of the treated fabrics,as well as scanning electron microscopy(SEM)analysis of surface morphology and chemical analysis using fouriertransition infrared spectroscopy(FTIR)and energy dispersive X-ray(EDX).The results show that treatment at a peak voltage of 11.83 k V is more efficient,except for the tensile strength which is enhanced at a peak voltage of 8.92 k V.The oxygen plasma treatment significantly improves the colour strength,which exhibits an increase from 11 to 18.The intensified colour was attributed to the significant influence of electrostatic interactions between the charged hydroxyl groups of the oxygen plasma treated viscose textiles and the dye molecules,which enhance the printability.The oxygen DBD plasma exhibits a higher ability to enhance the properties of textiles when compared to air and argon plasmas.This study presents a sustainable,economical,secure,and ecologically friendly approach to explore new fabrics for specific uses.

Ink-structing the future of vascular tissue engineering:a review of the physiological bioink design

Three-dimensional(3D)printing and bioprinting have come into view for a plannable and standardizable generation of implantable tissue-engineered constructs that can substitute native tissues and organs.These tissue-engineered structures are intended to integrate with the patient’s body.Vascular tissue engineering(TE)is relevant in TE because it supports the sustained oxygenization and nutrition of all tissue-engineered constructs.Bioinks have a specific role,representingthenecessarymedium for printability and vascular cell growth.This review aims to understand the requirements for the design of vascular bioinks.First,an in-depth analysis of vascular cell interaction with their native environment must be gained.A physiological bioink suitable for a tissue-engineered vascular graft(TEVG)must not only ensure good printability but also induce cells to behave like in a native vascular vessel,including self-regenerative and growth functions.This review describes the general structure of vascular walls with wall-specific cell and extracellular matrix(ECM)components and biomechanical properties and functions.Furthermore,the physiological role of vascular ECM components for their interaction with vascular cells and the mode of interaction is introduced.Diverse currently available or imaginable bioinks are described from physiological matrix proteins to nonphysiologically occurring but natural chemical compounds useful for vascular bioprinting.The physiological performance of these bioinks is evaluated with regard to biomechanical properties postprinting,with a view to current animal studies of 3D printed vascular structures.Finally,the main challenges for further bioink development,suitable bioink components to create a self-assembly bioink concept,and future bioprinting strategies are outlined.These concepts are discussed in terms of their suitability to be part of a TEVG with a high potential for later clinical use.

MHTML文件编码及其应用

单纯HTML没有对内容进行编码,从HTML提取信息存储到数据库可以借用HTML解析器完成,MHTML聚集HTML文档并进行MIME封装,汉字信息用Quoted-printable方式编码,信息读取后无法直接显示,需要进行转换.文章主要讨论MHTML中Quoted-printable编码和解码,给出算法及其应用.

Laser-Induced Graphene:En Route to Smart Sensing

The discovery of laser-induced graphene(LIG) from polymers in 2014 has aroused much attention in recent years.A broad range of applications,including batteries,catalysis,sterilization,and separation,have been explored.The advantages of LIG technology over conventional graphene synthesis methods are conspicuous,which include designable patterning,environmental friendliness,tunable compositions,and controllable morphologies.In addition,LIG possesses high porosity,great flexibility,and mechanical robustness,and excellent electric and thermal conductivity.The patternable and printable manufacturing process and the advantageous properties of LIG illuminate a new pathway for developing miniaturized graphene devices.Its use in sensing applications has grown swiftly from a single detection component to an integrated smart detection system.In this minireview,we start with the introduction of synthetic efforts related to the fabrication of LIG sensors.Then,we highlight the achievement of LIG sensors for the detection of a diversity of stimuli with a focus on the design principle and working mechanism.Future development of the techniques toward in situ and smart detection of multiple stimuli in widespread applications will be discussed.