Typhoon vs. cold wave: a comparative assessment of geomorphic response and boulder displacement using RFID technology

Extreme storm events in coastal zones play significant roles in shaping the morphology of boulder beaches.However,boulder displacement and the geomorphological evolution of boulder beaches driven by different extreme storm events,especially typhoon events,remain poorly understood.Thus,boulder displacement and the geomorphic response on a boulder beach in Fujian,southeastern China,were explored before,during and after a cold wave event(Dec.1–7,2020)and before and after Typhoon In-Fa(Jul.19–27,2021),a large tropical storm.This was achieved by tracking 42 tagged boulders distributed in the intertidal and supratidal zones using Radio Frequency Identification(RFID)and topographic surveys using real-time kinematic techniques,respectively.The results showed obvious disparities in boulder displacement in different geomorphic zones due to cold wave and typhoon events that were mainly characterized by migration magnitude,range,direction,and mode of transport.The typhoon event led to rapid and substantial changes in the overall morphology of the boulder beach,while the cold wave event impacted the intertidal morphology of the boulder beach to only a small extent.The surrounding structure of boulders,beach slope and beach elevation had a combined dominant effect on boulder displacement under the same extreme event.Hydrodynamic factors(effective wave energy fluxes,incident wave direction,storm surge and water level)had dominant effects on boulder displacement during different extreme events.In terms of a single event,the magnitude of the boulder displacement driven by the typhoon was much greater than that driven by the cold wave.However,considering the frequency and duration of cold waves in winter,the impact of multiple consecutive cold waves on the geomorphology of the boulder beach cannot be ignored in this study area.Alternating and repeated interactions between these two processes constitute the complete geomorphic evolution of the boulder beach.This study contributes to improved predictions of the morphodynamic response of boulder beaches to future storms,especially large tropical storms,and facilitates better coastal management.

Development of a Novel Noise Reduction Algorithm for Smart Checkout RFID System in Retail Stores

This paper presents a smart checkout system designed to mitigate the issues of noise and errors present in the existing barcode and RFID-based systems used at retail stores’checkout counters.This is achieved by integrating a novel AI algorithm,called Improved Laser Simulator Logic(ILSL)into the RFID system.The enhanced RFID system was able to improve the accuracy of item identification,reduce noise interference,and streamline the overall checkout process.The potential of the systemfor noise detection and elimination was initially investigated through a simulation study usingMATLAB and ILSL algorithm.Subsequently,it was deployed in a small-scale environment to validate its real-world performance.Results show that RFID with the proposed new algorithm ILSL and AI basket is capable of accurately detecting the related itemswhile eliminating noise originating fromunrelated objects,achieving an accuracy rate of 88%.

Research on Library Management System based on RFID Technology

This paper analyses the demand of intelligent bookshelf system, designed the overall structure of intelligent Library shelves system based on RFID and create the system use case model. The analysis and design of the intelligent bookshelf system structure from two aspects of hardware and software, puts forward the three layer system structure model of intelligent bookshelf system based on RFID technology. The paper provide the analysis method and the design ideas of library intelligent bookshelf system, has the very high application value, contribute to the realization of library intelligent management and improve the level of library services, provide a useful reference to the development of current book positioning system and intelligent goods shelf system solution.

Symbol RFID Technology to be Deployed at United States Defense Logistics Agency's Distribution Centers Worldwide

Symbol Technologies, Inc., The Enterprise Mobility Company, today announced that it had been selected by ODIN technologies, the leader in the physics of RFID testing, software and deployment, to support its recent contract win with the United States Defense Logistics Agency (DLA), the United States Department of Defense’s (DoD) logistics combat support agency that provides supplies and services to America’s military forces worldwide.

Research on robust multi-period inventory inaccuracy based on RFID technology

Inventory inaccuracy has great influence on the supply chain performance and it has attracted much attention of large numbers of researchers. This paper mainly studies the robust multi-period inventory inaccuracy problem by attaching radio frequency identification(RFID) technology. In particular, the typical retailer-supplier flexible commitment(RSFC) problem is considered to cope with the uncertain environment. After modeling, robust optimization(RO) and the affinely adjustable robust counterpart(AARC) methodology are applied to solve the model. Finally, this paper uses a numerical example for the analysis of how RFID technology can be exploited in supply chain, and the effect of demand uncertainty on the systems. The results highlight the importance of inventory availability related rates and variable uncertainty in determining the profitability of RFID adoption, which can provide managerial guidelines to supply chain firms.

Enhancing Hazardous Chemical Management in Chinese University Laboratories:Strategies for Safety and Efficiency

This paper examines the management of hazardous chemicals in Chinese university laboratories,identifying key challenges and proposing improvements.It reviews current practices and safety measures,highlighting deficiencies such as inadequate safety systems and insufficient awareness among personnel.The study emphasizes the necessity of tailored safety management systems,the integration of digital tracking technologies like Radio Frequency Identification,and enhanced safety training for staff.The proposed recommendations aim to mitigate risks and enhance laboratory safety and efficiency.In conclusion,the paper asserts that a comprehensive approach,encompassing improved management systems,technological advancements,and educational initiatives,is essential for safer chemical handling in academic research environments.

Embedded UHF RFID Tag for Durability Monitoring in Concrete

This paper describes the design of a battery-assisted Ultra-High Frequency (UHF) Radio-Fre- quency IDentification (RFID) tag suitable for embedding in concrete materials and its measurement in a mortar slab. The device is built to communicate wirelessly not only the ID number of the RFID chip but also the digitalized output of a strain gauge sensor. Design optimizations of the RFID antenna is based on published permittivity and conductivity values of concrete. Experimental read ranges are measured from 800 to 1000 MHz with the help of commercial test equipment. Reading is possible up to 50 cm from the surface of a mortar block for a tag embedded 5 cm below the surface. This result is the first published one for RFID tags embedded in concrete or mortar.

RFID’s Impacts on Business Value:A Case Study of Supply Chain in the Discrete Manufacturing Industry

Radio frequency identification （RFID） shall be a revolutionary technological innovation in recent years. Various solutions employing RFID technology have proved their functionality already in such industries as pharmaceuticals, express parcel carrying, and automotive manufacturing, and the increased efficiency and effectiveness has provided a good payback for the investments. But, up to now, fewer researches concentrate on applying REID to heavy-machinery manufacturing enterprises, which are a typical kind of enterprises in discrete manufacturing industry. The main objective of this case study is to extend our understanding of the potential for RFID to delivery of the heavy-machinery manufacturing enterprise, which involves one specific supply chain. A trial to automate the verification activities of delivery is designed and performed. Results show that the stops currently designed into the processes can be eliminated by employing RFID technology and that RFID should be a revolutionary technology as it redesigns the existing processes, eliminate some current inefficiency, improve the accuracy of delivering the products, increases information sharing between supply chain members.

Design of Library Management System based on Internet of Things

This paper briefly introduces the concept and the development of technology of the Internet of things, systematically elaborated the key technology of RFID, sensors, smart chip and wireless transmission network in process of construction for library management system, and put forward library management system based on the Intemet of things. The paper design architecture scheme for the system in accordance with the reader＇ s habit, management staff and the library functions. The purpose of the article expound the concept of intelligent library, provides the strategy guide for intelligent library development system based on the Interact of things.

Remanufacturing Closed-Loop Supply Chain Model with Radio Frequency Identification Affecting Recycling Rate

In order to construct a resource-saving and environment- friendly society, the advantages of radio frequency identification （RFID） were considered. And it put forward the idea of introducing RFID in the recycling activities of waste products. Taking into account such elements as the technical level of RFID, cost saving from remanufacturing and the cost of RFID tags, both centralized and decentralized supply chain models with different participants in waste product collection were created, in order to determine the optimal pricing strategy and RFID technical level. In the end, sensitivity analyses were conducted to analyze the impacts of scaling parameter for additional increased recovery rate with RFED on pricing and RFID technology level, and impacts of cost saving on the profits of participants in different remanufacturing closed-loop supply chain models.

A method of monitoring and locating eggs laid by breeding geese based on photoelectric sensing technology

On the current breeding goose farm,the detection of individual egg laying mainly depends on some judgement experiences of farm workers.At present,there have been some egg laying detection systems developed with images and weighing sensors,which only signal the eggs being laid,but no egg position being achieved.Meanwhile,the detection rate of the system is not high due to environment limitations like dim light of the goose barn.Therefore,to solve these problems mentioned above,an intelligent detection and positioning system is pro-posed by integrating technologies of the Radio Frequency(RF)and photoelectric sensors,together with the geometric calculation principle.In this research,individual egg laying information of breeding geese in a non-cage state was examined to improve the level of auto-matic detection and positioning in the field of breeder egg production.The results showed that an accurate detection and positioning of an egg in a nest filled with the artificial turf could be achieved under some conditions:the height of sensor is 3.5 cm from the bottom plate of the egg laying nest,the spacing of the photoresistor module is 5 cm,and the external light intensity is less than 110 LUX.It also shown that the error of the goose egg position recognition is 0.443 cm with a suitable level of straw in the nest.Therefore,the monitoring system and positioningmethod that was developed in this research could provide a reference for the analysis of individual egg laying behavior,and could result in an improvement in the automatic egg collection for the breeding geese production.

2006 International RFID Technologies Summit Forum Held in Tsinghua School of Economics and Management

The International Radio Frequency Identification （RFID） Technologies Summit Forum, organized jointly by the Research Center for Contemporary Management, Tsinghua School of Economics and Management （SEM） and the Asia Pacific RFID Technology Association, was held from August 21 to 23, 2006 in Tsinghua＇s SEM international auditorium.

Potentials for Radio Frequency Identification in AEC/FM

Radio frequency identification (RFID) technology has proved to be very effective in industries as diverse as aircraft manufacturing to health and care. The construction industry has been slow to take up on RFID and this paper will discuss the merits of the technology in its potential for application within the construction sector. The paper reports about the prototypical implementation of RFID-based information management in FM-scenarios. The prototypes were tested at University College Cork (UCC). The general applicability of RFID for decentralised information management could be demonstrated.