An advanced theoretical approach to study super-multiperiod superlattices:theory vs experiments

A new theoretical method to study super-multiperiod superlattices has been developed.The method combines the precision of the 8-band kp-method with the flexibility of the shooting method and the Monte Carlo approach.This method was applied to examine the finest quality samples of super-multiperiod Al_(0.3)Ga_(0.7)As/GaAs superlattices grown by molecular beam epitaxy.The express photoreflectance spectroscopy method was utilized to validate the proposed theoretical method.For the first time,the accurate theoretical analysis of the energy band diagram of super-multiperiod superlattices with experimental verification has been conducted.The proposed approach highly accurately determines transition peak positions and enables the calculation of the energy band diagram,transition energies,relaxation rates,and gain estimation.It has achieved a remarkably low 5%error compared to the commonly used method,which typically results in a 25%error,and allowed to recover the superlattice parameters.The retrieved intrinsic parameters of the samples aligned with XRD data and growth parameters.The proposed method also accurately predicted the escape of the second energy level for quantum well thicknesses less than 5 nm,as was observed in photoreflectance experiments.The new designs of THz light-emitting devices operating at room temperature were suggested by the developed method.

Peak structure in the interlayer conductance of Moirésuperlattices

We investigate the peak structure in the interlayer conductance of Moirésuperlattices using a tunneling theory wedeveloped previously.The theoretical results predict that,due to the resonance of two different partial waves,the doublepeakstructure can appear in the curve of the interlayer conductance versus twist angle.Furthermore,we study the influencesof the model parameters,i.e.,the chemical potential of electrodes,the thickness of Moirésuperlattice,and the strength ofinterface potential,on the peak structure of the interlayer conductance.In particular,the parameter dependence of the peakstructure is concluded via a phase diagram,and the physical meanings of the phase diagram is formulized.Finally,thepotential applications of the present work is discussed.

Structural design of mid-infrared waveguide detectors based on InAs/GaAsSb superlattice

In the realm of near-infrared spectroscopy,the detection of molecules has been achieved using on-chip waveguides and resonators.In the mid-infrared band,the integration and sensitivity of chemical sensing chips are often constrained by the reliance on off-chip light sources and detectors.In this study,we demonstrate an InAs/GaAsSb superlattice mid-infrared waveguide integrated detector.The GaAsSb waveguide layer and the InAs/GaAsSb superlattice absorbing layer are connected through evanescent coupling,facilitating efficient and highquality detection of mid-infrared light with minimal loss.We conducted a simulation to analyze the photoelectric characteristics of the device.Additionally,we investigated the factors that affect the integration of the InAs/GaAs⁃Sb superlattice photodetector and the GaAsSb waveguide.Optimal thicknesses and lengths for the absorption lay⁃er are determined.When the absorption layer has a thickness of 0.3μm and a length of 50μm,the noise equiva⁃lent power reaches its minimum value,and the quantum efficiency can achieve a value of 68.9%.The utilization of waveguide detectors constructed with Ⅲ-Ⅴ materials offers a more convenient means of integrating mid-infra⁃red light sources and achieving photoelectric detection chips.

Moiré superlattices arising from growth induced by screw dislocations in layered materials

Moiré superlattices(MSLs) are modulated structures produced from homogeneous or heterogeneous two-dimensional layers stacked with a twist angle and/or lattice mismatch. Enriching the methods for fabricating MSL and realizing the unique emergent properties are key challenges in its investigation. Here we recommend that the spiral dislocation driven growth is another optional method for the preparation of high quality MSL samples. The spiral structure stabilizes the constant out-of-plane lattice distance, causing the variations in electronic and optical properties. Taking SnS_(2) MSL as an example, we find prominent properties including large band gap reduction(~ 0.4 e V) and enhanced optical activity. Firstprinciples calculations reveal that these unusual properties can be ascribed to the locally enhanced interlayer interaction associated with the Moiré potential modulation. We believe that the spiral dislocation driven growth would be a powerful method to expand the MSL family and broaden their scope of application.

Comprehensive study of the ultrafast photoexcited carrier dynamics in Sb_(2)Te_(3)–GeTe superlattices

Chalcogenide superlattices Sb_(2)Te_(3)-GeTe is a candidate for interfacial phase-change memory(iPCM) data storage devices.By employing terahertz emission spectroscopy and the transient reflectance spectroscopy together,we investigate the ultrafast photoexcited carrier dynamics and current transients in Sb_(2)Te_(3)-GeTe superlattices.Sample orientation and excitation polarization dependences of the THz emission confirm that ultrafast thermo-electric,shift and injection currents contribute to the THz generation in Sb_(2)Te_(3)-GeTe superlattices.By decreasing the thickness and increasing the number of GeTe and Sb_(2)Te_(3) layer,the interlayer coupling can be enhanced,which significantly reduces the contribution from circular photo-galvanic effect(CPGE).A photo-induced bleaching in the transient reflectance spectroscopy probed in the range of~1100 nm to~1400 nm further demonstrates a gapped state resulting from the interlayer coupling.These demonstrates play an important role in the development of iPCM-based high-speed optoelectronic devices.

Bending Resistance Covalent Organic Framework Superlattice:“Nano‑Hourglass”‑Induced Charge Accumulation for Flexible In‑Plane Micro‑Supercapacitors

Covalent organic framework(COF)film with highly exposed active sites is considered as the promising flexible selfsupported electrode for in-plane microsupercapacitor(MSC).Superlattice configuration assembled alternately by different nanofilms based on van der Waals force can integrate the advantages of each isolated layer to exhibit unexpected performances as MSC film electrodes,which may be a novel option to ensure energy output.Herein,a mesoporous free-standing A-COF nanofilm(pore size is 3.9 nm,averaged thickness is 4.1 nm)with imine bond linkage and a microporous B-COF nanofilm(pore size is 1.5 nm,averaged thickness is 9.3 nm)withβ-keto-enamine-linkages are prepared,and for the first time,we assembly the two lattice matching films into sandwich-type superlattices via layer-by-layer transfer,in which ABA–COF superlattice stacking into a“nano-hourglass”steric configuration that can accelerate the dynamic charge transportation/accumulation and promote the sufficient redox reactions to energy storage.The fabricated flexible MSC–ABA–COF exhibits the highest intrinsic CV of 927.9 F cm^(−3) at 10 mV s^(−1) than reported two-dimensional alloy,graphite-like carbon and undoped COF-based MSC devices so far,and shows a bending-resistant energy density of 63.2 mWh cm^(−3) even after high-angle and repeat arbitrary bending from 0 to 180°.This work provides a feasible way to meet the demand for future miniaturization and wearable electronics.

Spontaneous isospin polarization and quantum Hall ferromagnetism in a rhombohedral trilayer graphene superlattice

Moiré superlattices in van der Waals heterostructures have recently attracted enormous interests, due to the highly controllable electronic correlation that gives rise to superconductivity, ferromagnetism, and nontrivial topological properties. To gain a deep understanding of such exotic properties, it is essential to clarify the broken symmetry between spin and valley flavors which universally exists in these ground states. Here in a rhombohedral trilayer graphene crystallographically aligned with a hexagonal boron nitride, we report various kinds of symmetry-breaking transition tuned by displacement fields(D) and magnetic fields:(ⅰ) While it is well known that a finite D can enhance correlation to result in correlated insulators at fractional fillings of a flat band, we find the correlation gap emerges before the flavor is fully filled at a positive D, but the sequence is reversed at a negative D.(ⅱ) Around zero D, electronic correlation can be invoked by narrow Landau levels, leading to quantum Hall ferromagnetism that lifts all the degeneracies including not only spin and valley but also orbital degrees of freedom. Our result unveils the complication of transitions between symmetry-breaking phases, shedding light on the mechanisms of various exotic phenomena in strongly correlated systems.

Epitaxial growth of trilayer graphene moiré superlattice

The graphene-based moiré superlattice has been demonstrated as an exciting system for investigating strong correlation phenomenon. However, the fabrication of such moiré superlattice mainly relies on transfer technology. Here, we report the epitaxial growth of trilayer graphene(TLG) moiré superlattice on hexagonal boron nitride(h BN) by a remote plasma-enhanced chemical vapor deposition method. The as-grown TLG/h BN shows a uniform moiré pattern with a period of ~ 15 nm by atomic force microscopy(AFM) imaging, which agrees with the lattice mismatch between graphene and h BN. By fabricating the device with both top and bottom gates, we observed a gate-tunable bandgap at charge neutral point(CNP) and displacement field tunable satellite resistance peaks at half and full fillings. The resistance peak at half-filling indicates a strong electron–electron correlation in our grown TLG/h BN superlattice. In addition, we observed quantum Hall states at Landau level filling factors ν = 6, 10, 14,..., indicating that our grown trilayer graphene has the ABC stacking order. Our work suggests that epitaxy provides an easy way to fabricate stable and reproducible two-dimensional strongly correlated electronic materials.

Impeded thermal transport in aperiodic BN/C nanotube superlattices due to phonon Anderson localization

Anderson localization of phonons is a kind of phonon wave effect,which has been proved to occur in many structures with disorders.In this work,we introduced aperiodicity to boron nitride/carbon nanotube superlattices(BN/C NT SLs),and used molecular dynamics to calculate the thermal conductivity and the phonon transmission spectrum of the models.The existence of phonon Anderson localization was proved in this quasi one-dimensional structure by analyzing the phonon transmission spectra.Moreover,we introduced interfacial mixing to the aperiodic BN/C NT SLs and found that the coexistence of the two disorder entities(aperiodicity and interfacial mixing)can further decrease the thermal conductivity.In addition,we also showed that anharmonicity can destroy phonon localization at high temperatures.This work provides a reference for designing thermoelectric materials with low thermal conductivity by taking advantage of phonon localization.

High-performance extended short-wavelength infrared PBn photodetectors based on InAs/GaSb/AlSb superlattices

High performance short-wavelength infrared PBn photodetectors based on InAs/GaSb/AlSb superlattices on GaSb substrate have been demonstrated.At 300 K,the device exhibits a 50%cut-off wavelength of~2.1μm as predicted from the band structure calculation;the device responsivity peaks at 0.85 A/W,corresponding to a quantum efficiency(QE)of 56%for 2.0μm-thick absorption region.The dark current density of 1.03×10^(-3)A/cm^(2)is obtained under 50 mV applied bias.The device exhibits a saturated dark current shot noise limited specific detectivity(D*)of 3.29×1010cm·Hz^(1/2)/W(at a peak responsivity of 2.0μm)under-50 mV applied bias.

Recent progress on fabrication and flat-band physics in 2D transition metal dichalcogenides moiré superlattices

Moiré superlattices are formed when overlaying two materials with a slight mismatch in twist angle or lattice constant. They provide a novel platform for the study of strong electronic correlations and non-trivial band topology, where emergent phenomena such as correlated insulating states, unconventional superconductivity, and quantum anomalous Hall effect are discovered. In this review, we focus on the semiconducting transition metal dichalcogenides(TMDs) based moiré systems that host intriguing flat-band physics. We first review the exfoliation methods of two-dimensional materials and the fabrication technique of their moiré structures. Secondly, we overview the progress of the optically excited moiré excitons, which render the main discovery in the early experiments on TMD moiré systems. We then introduce the formation mechanism of flat bands and their potential in the quantum simulation of the Hubbard model with tunable doping, degeneracies, and correlation strength. Finally, we briefly discuss the challenges and future perspectives of this field.

Strain compensated type Ⅱ superlattices grown by molecular beam epitaxy

We investigate a strain compensation method for the growth of complex interband cascade laser structures. For thick In As/Al Sb superlattice clad layers, the sublayer thicknesses were adjusted so that the tensile strain energy in the In As sublayer was equal to the compressive strain energy in the Al Sb sublayer. For the four-constituent active region, as the compressive strain in the Ga0.65In0.35Sb alloy layer was large, a tensile strain was incorporated in the chirped In As/Al Sb superlattice region for strain compensation to the Ga0.65In0.35Sb alloy. A laser structure of thickness 6 μm was grown on the Ga Sb substrate by molecular beam epitaxy. The wafer exhibited good surface morphology and high crystalline quality.

Long wavelength interband cascade photodetector with type Ⅱ InAs/GaSb superlattice absorber

We report on a long wavelength interband cascade photodetector with type Ⅱ InAs/GaSb superlattice absorber.The device is a three-stage interband cascade structure.At 77 K,the 50%cutoff wavelength of the detector is 8.48μm and the peak photoresponse wavelength is 7.78μm.The peak responsivity is 0.93 A/W and the detectivity D*is 1.12×10^(11)cm·Hz0.5/W for 7.78μm at-0.20 V.The detector can operate up to about 260 K.At 260 K,the 50%cutoff wavelength is 11.52μm,the peak responsivity is 0.78 A/W and the D*is 5.02×10^(8)cm·Hz0.5/W for the peak wavelength of 10.39μm at-2.75 V.The dark current of the device is dominated by the diffusion current under both a small bias voltage of-0.2 V and a large one of-2.75 V for the temperature range of 120 to 260 K.

Microstructure and superhardness effect of VC/TiC superlattice films

Vanadium carbide/titanium carbide （VC/TiC） superlattice films were synthesized by magnetron sputtering method. The effects of modulation period on the microstructure evolution and mechanical properties were investigated by EDXA, XRD, HRTEM and nano-indentation. The results reveal that the VC/TiC superlattice films form an epitaxial structure when their modulation period is less than a critical value, accompanied with a remarkable increase in hardness. Further increasing the modulation period, the hardness of superlattices decreases slowly to the rule-of-mixture value due to the destruction of epitaxial structures. The XRD results reveal that three-directional strains are generated in superlattices when the epitaxial structure is formed, which may change the modulus of constituent layers. This may explain the remarkable hardness enhancement of VC/TiC superlattices.

ab initio CALCULATION FOR THE ELECTRONIC STRUCTURE OF GaAs/Al_xGa_(1-x) As SUPERLATTICES: CONJUGATE GRADIENT APPROACH

The electronic structure of GaAs/Al xGa 1-x As superlattices has been investigated by an ab initio calculation method—the conjugate gradient (CG) approach.In order to determine that,a conventional CG scheme is modified for our superlattices:First,apart from the former scheme,for the fixed electron density n(z),the eigenvalues and eigenfunctions are calculated,and then by using those,reconstruct the new n(z).Also,for every k z,we apply the CG schemes independently.The calculated energy difference between two minibands,and Fermi energy are in good agreement with the experimental data.

Superwide-angle acoustic propagations above the critical angles of the Snell law in liquid solid superlattice

In this paper, superwide-angle acoustic propagations above the critical angles of the Snell law in liquid–solid superlattice are investigated. Incident waves above the critical angles of the Snell law usually inevitably induce total reflection.However, incident waves with big oblique angles through the liquid–solid superlattice will produce a superwide angle transmission in a certain frequency range so that total reflection does not occur. Together with the simulation by finite element analysis, theoretical analysis by using transfer matrix method suggests the Bragg scattering of the Lamb waves as the physical mechanism of acoustic wave super-propagation far beyond the critical angle. Incident angle, filling fraction,and material thickness have significant influences on propagation. Superwide-angle propagation phenomenon may have potential applications in nondestructive evaluation of layered structures and controlling of energy flux.

The electrochemical characteristics of AB_(4)-type rare earth-Mg-Ni-based superlattice structure hydrogen storage alloys for nickel metal hydride battery

Rare earth-Mg-Ni-based alloys with superlattice structures are new generation negative electrode materials for the nickel metal hydride batteries.Among them,the novel AB_(4)-type superlattice structure alloy is supposed to have superior cycling stability and rate capability.Yet its preparation is hindered by the crucial requirement of temperature and the special composition which is close to the other superlattice structure.Here,we prepare rare earth-Mg-Ni-based alloy and study the phase transformation of alloys to make clear the formation of AB_(4)-type phase.It is found Pr_(5)Co_(19)-type phase is converted from Ce_(5)Co_(19)-type phase and shows good stability at higher temperature compared to the Ce_(5)Co_(19)-type phase in the range of 930-970℃.Afterwards,with further 5℃increasing,AB_(4)-type superlattice structure forms at a temperature of 975℃by consuming Pr_(5)Co_(19)-type phase.In contrast with A_(5)B_(19)-type alloy,AB_(4)-type alloy has superior rate capability owing to the dominant advantages of charge transfer and hydrogen diffusion.Besides,AB_(4)-type alloy shows long lifespan whose capacity retention rates are 89.2%at the 100;cycle and 82.8%at the 200;cycle,respectively.AB_(4)-type alloy delivers 1.53 wt.%hydrogen storage capacity at room temperature and exhibits higher plateau pressure than Pr_(5)Co_(19)-type alloy.The work provides novel AB_(4)-type alloy with preferable electrochemical performance as negative electrode material to inspire the development of nickel metal hydride batteries.

Scalable fabrication of geometry-tunable self-aligned superlattice photonic crystals for spectrum-programmable light trapping

Superlattice photonic crystals (SPhCs) possess considerablepotentials as building blocks for constructing high-performancedevices because of their great flexibilities in opticalmanipulation. From the prospective of practical applications,scalable fabrication of SPhCs with large-area uniformity and precisegeometrical controllability has been considered as one prerequisitebut still remains a challenge.

Molecular Chirality and Chiral Superlattice in Crystal of Tetrakis[(pyrrol-1-yl)methyl]methane

The crystal structure of tetrakis[(pyrrol-1-yl)methyl]methane was determined by X-ray diffraction measurement, and the result shows that it belongs to monoclinic crystal system, space group is P2 1/n, with a=0.9284(3) nm, b=1.0950(6) nm, c=1.8749(8) nm; α=γ= 90.00(4)°, β=103.63(3)°, V=1.8523(14) nm 3, Z=4, ρ calcd. =1.192 kg/m 3, μ=0.072 nm -1 , F(000)=712, R 1=0.0854, wR 2=0.1884. It has been found that the molecules exist in two enantiomeric states. Enantioselective self-assemblies such as one-dimensional molecular stacks in a single handedness, homochiral monolayers and a chiral superlattice are specified in this racemic crystal. In addition, a simple technique is advocated to distinguish chiral states from tetrahedral molecules in the solid state. The present R/S nomenclature of the tetracooradinated carbon centers is used solely for its convenience to distinguish the two enantiomeric states, but not used to determine the absolute configurations.

Low Crosstalk Three-Color Infrared Detector by Controlling the Minority Carriers Type of InAs/GaSb Superlattices for Middle-Long and Very-Long Wavelength

We report a type-Ⅱ InAs/GaSb superlattice three-color infrared detector for mid-wave （MW）, long-wave （LW）, and very long-wave （VLW） detections. The detector structure consists of three contacts of NIPIN architecture for MW and LW detections, and hetero-junction NIP architecture for VLW detection. It is found that the spectral crosstalks can be significantly reduced by controlling the minority carriers transport via doping beryllium in the two active regions of NIPIN section. The crosstalk detection at MW, LW, and VLW signals are achieved by selecting the bias voltages on the device. At 77K, the cutoff wavelengths of the three-color detection are 5.3μm （at OmV）, 141μm （at 300mV） and 19μm （at -20mV） with the detectivities of 4.6xlO11 cm.Hzl/ZW-1, 2.3×10^10 cm.Hzl/2W-1, and 1.0×10^10cm.Hzl/2W-1 for MW, LW and VLW. The crosstalks of the MW channel, LW channel, and VLW channel are almost 0, 0.25, and 0.6, respectively.