High-speed performance self-powered short wave ultraviolet radiation detectors based onκ(ε)-Ga_(2)O_(3)

High-speed solar-blind short wavelength ultraviolet radiation detectors based onκ(ε)-Ga_(2)O_(3)layers with Pt contacts were demonstrated and their properties were studied in detail.Theκ(ε)-Ga_(2)O_(3)layers were deposited by the halide vapor phase epitaxy on patterned GaN templates with sapphire substrates.The spectral dependencies of the photoelectric properties of struc-tures were analyzed in the wavelength interval 200-370 nm.The maximum photo to dark current ratio,responsivity,detectiv-ity and external quantum efficiency of structures were determined as:180.86 arb.un.,3.57 A/W,1.78×10^(12) Hz^(0.5)∙cm·W^(-1) and 2193.6%,respectively,at a wavelength of 200 nm and an applied voltage of 1 V.The enhancement of the photoresponse was caused by the decrease in the Schottky barrier at the Pt/κ(ε)-Ga_(2)O_(3)interface under ultraviolet exposure.The detectors demon-strated could functionalize in self-powered mode due to built-in electric field at the Pt/κ(ε)-Ga_(2)O_(3)interface.The responsivity and external quantum efficiency of the structures at a wavelength of 254 nm and zero applied voltage were 0.9 mA/W and 0.46%,respectively.The rise and decay times in self-powered mode did not exceed 100 ms.

Self-powered UVC detectors based on α-Ga_(2)O_(3) with enchanted speed performance

Detectors were developed for detecting irradiation in the short-wavelength ultraviolet(UVC)interval using high-quality single-crystallineα-Ga_(2)O_(3) films with Pt interdigital contacts.The films ofα-Ga_(2)O_(3) were grown on planar sapphire substrates with c-plane orientation using halide vapor phase epitaxy.The spectral dependencies of the photo to dark current ratio,responsivity,external quantum efficiency and detectivity of the structures were investigated in the wavelength interval of 200−370 nm.The maximum of photo to dark current ratio,responsivity,external quantum efficiency,and detectivity of the structures were 1.16×10^(4) arb.un.,30.6 A/W,1.65×10^(4)%,and 6.95×10^(15) Hz^(0.5)·cm/W at a wavelength of 230 nm and an applied voltage of 1 V.The high values of photoelectric properties were due to the internal enhancement of the photoresponse associated with strong hole trapping.Theα-Ga_(2)O_(3) film-based UVC detectors can function in self-powered operation mode due to the built-in electric field at the Pt/α-Ga_(2)O_(3) interfaces.At a wavelength of 254 nm and zero applied voltage,the structures exhibit a responsivity of 0.13 mA/W and an external quantum efficiency of 6.2×10^(−2)%.The UVC detectors based on theα-Ga_(2)O_(3) films demonstrate high-speed performance with a rise time of 18 ms in self-powered mode.

Metal-Halide Perovskite Submicrometer-Thick Films for Ultra-Stable Self-Powered Direct X-Ray Detectors

Metal-halide perovskites are revolutionizing the world of X-ray detectors,due to the development of sensitive,fast,and cost-effective devices.Self-powered operation,ensuring portability and low power consumption,has also been recently demonstrated in both bulk materials and thin films.However,the signal stability and repeatability under continuous X-ray exposure has only been tested up to a few hours,often reporting degradation of the detection performance.Here it is shown that self-powered direct X-ray detectors,fabricated starting from a FAPbBr_(3)submicrometer-thick film deposition onto a mesoporous TiO_(2)scaffold,can withstand a 26-day uninterrupted X-ray exposure with negligible signal loss,demonstrating ultra-high operational stability and excellent repeatability.No structural modification is observed after irradiation with a total ionizing dose of almost 200 Gy,revealing an unexpectedly high radiation hardness for a metal-halide perovskite thin film.In addition,trap-assisted photoconductive gain enabled the device to achieve a record bulk sensitivity of 7.28 C Gy^(−1)cm^(−3)at 0 V,an unprecedented value in the field of thin-film-based photoconductors and photodiodes for“hard”X-rays.Finally,prototypal validation under the X-ray beam produced by a medical linear accelerator for cancer treatment is also introduced.

CuO–TiO_(2) based self-powered broad band photodetector

An efficient room-temperature self-powered,broadband(300 nm–1100 nm)photodetector based on a CuO–TiO_(2)/TiO_(2)/p-Si(100)heterostructure is demonstrated.The CuO–TiO_(2)nanocomposites were grown in a two-zone horizontal tube furnace on a 40 nm TiO_(2)thin film deposited on a p-type Si(100)substrate.The CuO–TiO_(2)/TiO_(2)/p-Si(100)devices exhibited excellent rectification characteristics under dark and individual photoillumination conditions.The devices showed remarkable photo-response under broadband(300–1100 nm)light illumination at zero bias voltage,indicating the achievement of highly sensitive self-powered photodetectors at visible and near-infrared light illuminations.The maximum response of the devices is observed at 300 nm for an illumination power of 10 W.The response and recovery times were calculated as 86 ms and 78 ms,respectively.Moreover,under a small bias,the devices showed a prompt binary response by altering the current from positive to negative under illumination conditions.The main reason behind this binary response is the low turn-on voltage and photovoltaic characteristics of the devices.Under illumination conditions,the generation of photocurrent is due to the separation of photogenerated electron-hole pairs within the built-in electric field at the CuO–TiO_(2)/TiO_(2)interface.These characteristics make the CuO–TiO_(2)/TiO_(2)broadband photodetectors suitable for applications that require high response speeds and self-sufficient functionality.

Wearable Triboelectric Nanogenerators Based on Printed Polyvinylidene Fluoride Films Incorporated with Cobalt-Based Metal-Organic Framework for Self-Powered Mobile Electronics

In this study,wearable triboelectric nanogenerators comprising bar-printed polyvinylidene fluoride(PVDF)films incorporated with cobalt-based metal-organic framework(Co-MOF)were developed.The enhanced output performance of the TENGs was attributed to the phase transition of PVDF from a-crystals toβ-crystals,as facilitated by the incorporation of the MOF.The synthesis conditions,including metal ion,concentration,and particle size of the MOF,were optimized to increase open-circuit voltage(VOC)and open-circuit current(I_(SC))of PVDF-based TENGs.In addition to high operational stability,mechanical robustness,and long-term reliability,the developed TENG consisting of PVDF incorporated with Co-MOF(Co-MOF@PVDF)achieved a VOC of 194 V and an I_(SC)of 18.8μA.Furthermore,the feasibility of self-powered mobile electronics was demonstrated by integrating the developed wearable TENG with rectifier and control units to power a global positioning system(GPS)device.The local position of the user in real-time through GPS was displayed on a mobile interface,powered by the battery charged through friction-induced electricity generation.

Self-Powered Implantable Skin-Like Glucometer for Real-Time Detection of Blood Glucose Level In Vivo

Implantable bioelectronics for analyzing physiological biomarkers has recently been recognized as a promising technique in medical treatment or diagnostics. In this study, we developed a self-powered implantable skinlike glucometer for real-time detection of blood glucose level in vivo. Based on the piezo-enzymatic-reaction coupling effect of GOx@ZnO nanowire, the device under an applied deformation can actively output piezoelectric signal containing the glucose-detecting information. No external electricity power source or battery is needed for this device, and the outputting piezoelectric voltage acts as both the biosensing signal and electricity power. A practical application of the skin-like glucometer implanted in mouse body for detecting blood glucose level has been simply demonstrated. These results provide a new technique path for diabetes prophylaxis and treatment.

Electrospinning of Flexible Poly(vinyl alcohol)/MXene Nanofiber-Based Humidity Sensor Self-Powered by Monolayer Molybdenum Diselenide Piezoelectric Nanogenerator

Two-dimensional material has been widely investigated for potential applications in sensor and flexible electronics.In this work,a self-powered flexible humidity sensing device based on poly(vinyl alcohol)/Ti_(3)C_(2)Tx(PVA/MXene)nanofibers film and monolayer molybdenum diselenide(MoSe2)piezoelectric nanogenerator(PENG)was reported for the first time.The monolayer MoSe_(2)-based PENG was fabricated by atmospheric pressure chemical vapor deposition techniques,which can generate a peak output of 35 mV and a power density of42 mW m^(-2).The flexible PENG integrated on polyethylene terephthalate(PET)substrate can harvest energy generated by different parts of human body and exhibit great application prospects in wearable devices.The electrospinned PVA/MXene nanofiber-based humidity sensor with flexible PET substrate under the driven of monolayer MoSe_(2) PENG,shows high response of~40,fast response/recovery time of 0.9/6.3 s,low hysteresis of 1.8%and excellent repeatability.The self-powered flexible humidity sensor yields the capability of detecting human skin moisture and ambient humidity.This work provides a pathway to explore the high-performance humidity sensor integrated with PENG for the self-powered flexible electronic devices.

Fully Fabric-Based Triboelectric Nanogenerators as Self-Powered Human-Machine Interactive Keyboards

Combination flexible and stretchable textiles with self-powered sensors bring a novel insight into wearable functional electronics and cyber security in the era of Internet of Things.This work presents a highly flexible and self-powered fully fabric-based triboelectric nanogenerator(F-TENG)with sandwiched structure for biomechanical energy harvesting and real-time biometric authentication.The prepared F-TENG can power a digital watch by low-frequency motion and respond to the pressure change by the fall of leaves.A self-powered wearable keyboard(SPWK)is also fabricated by integrating large-area F-TENG sensor arrays,which not only can trace and record electrophysiological signals,but also can identify individuals’typing characteristics by means of the Haar wavelet.Based on these merits,the SPWK has promising applications in the realm of wearable electronics,self-powered sensors,cyber security,and artificial intelligences.

Nanogenerators for Self-Powered Gas Sensing

Looking toward world technology trends over the next few decades, self-powered sensing networks are a key field of technological and economic driver for global industries. Since 2006, Zhong Lin Wang's group has proposed a novel concept of nanogenerators(NGs), including piezoelectric nanogenerator and triboelectric nanogenerator, which could convert a mechanical trigger into an electric output. Considering motion ubiquitously exists in the surrounding environment and for any most common materials used every day, NGs could be inherently served as an energy source for our daily increasing requirements or as one of self-powered environmental sensors. In this regard, by coupling the piezoelectric or triboelectric properties with semiconducting gas sensing characterization, a new research field of self-powered gas sensing has been proposed. Recent works have shown promising concept to realize NG-based self-powered gas sensors that are capable of detecting gas environment without the need of external power sources to activate the gas sensors or to actively generate a readout signal. Compared with conventional sensors, these self-powered gas sensors keep the approximate performance.Meanwhile, these sensors drastically reduce power consumption and additionally reduce the required space for integration,which are significantly suitable for the wearable devices. This paper gives a brief summary about the establishment and latest progress in the fundamental principle, updated progress and potential applications of NG-based self-powered gas sensing system. The development trend in this field is envisaged, and the basic configurations are also introduced.

Spatially Bandgap-Graded Mo S2（1-x）Se2x Homojunctions for Self-Powered Visible–Near-Infrared Phototransistors

Ternary transition metal dichalcogenide alloys with spatially graded bandgaps are an emerging class of two-dimensional materials with unique features,which opens up new potential for device applications.Here,visible–near-infrared and self-powered phototransistors based on spatially bandgap-graded MoS2(1−x)Se2x alloys,synthesized by a simple and controllable chemical solution deposition method,are reported.The graded bandgaps,arising from the spatial grading of Se composition and thickness within a single domain,are tuned from 1.83 to 1.73 eV,leading to the formation of a homojunction with a builtin electric field.Consequently,a strong and sensitive gate-modulated photovoltaic effect is demonstrated,enabling the homojunction phototransistors at zero bias to deliver a photoresponsivity of 311 mA W−1,a specific detectivity up to^10^11 Jones,and an on/off ratio up to^10^4.Remarkably,when illuminated by the lights ranging from 405 to 808 nm,the biased devices yield a champion photoresponsivity of 191.5 A W−1,a specific detectivity up to^1012 Jones,a photoconductive gain of 10^6–10^7,and a photoresponsive time in the order of^50 ms.These results provide a simple and competitive solution to the bandgap engineering of two-dimensional materials for device applications without the need for p–n junctions.

Double Peak Derived from Piezoelectric Coefficient Nonlinearity and Proposal for Self-Powered Systems

With the development of wireless sensor network(WSN)applications in intelligent monitoring,additional support for the low power consumption wireless nodes can be provided by piezoceramics that harvest vibrational energy.First,we describe the effects of stimulation variations on piezoceramics and the energy harvesting circuit set-up.Two types of piezoceramics were stimulated at different frequencies and amplitudes to obtain the power output characteristics.Then,the energy harvesting circuit was studied and coupled with the piezoceramics.A double peak phenomenon was found in energy harvesting using a hard piezoceramic which gave a direct proof that the nonlinearity of the piezo constant should be considered in application.Finally,energy storage and output were studied and analyzed.Electronic components for the WSN were recommended according to the output power and the application.The results will give an instruction for piezoceramic energy harvesting under various stress amplitudes on its implementation.

3D-Printed Superhydrophobic and Magnetic Device That Can Self-Powered Sense A Tiny Droplet Impact

Three-dimensional(3D)-printed magnetic soft architectures have attracted extensive attention and research from the engineering and material fields.The force-driven shape deformation of such architectures causes a change in the magnetic field distribution,indicating the capability to convert mechanical energy to electricity.Herein,we fabricate a flexible superhydrophobic and magnetic device by integrating two kinds of 3D printing approaches.The 3D-printed magnetic device(3DMD)exhibits a long-term stable mechanoelectrical conversion capacity under consecutive water droplet dripping.The output current of the 3DMD is higher than that of records in the existing literature.Combined with Maxwell numerical simulation,the mechanoelectrical conversion mechanism of the 3DMD is investigated,further guiding regulation of the diverse parameters.Moreover,three 3DMDs are integrated to light up a commercial light-emitting diode(LED)by a stream of collected rainwater.Such a combined design incorporating energy conversion is believed to promisingly motive advances in the 3D printing field.

Mechanoluminescent-Triboelectric Bimodal Sensors for Self-Powered Sensing and Intelligent Control

Self-powered flexible devices with skin-like multiple sensing ability have attracted great attentions due to their broad applications in the Internet of Things(IoT).Various methods have been proposed to enhance mechano-optic or electric performance of the flexible devices;however,it remains challenging to realize the display and accurate recognition of motion trajectories for intelligent control.Here,we present a fully self-powered mechanoluminescent-triboelectric bimodal sensor based on micronanostructured mechanoluminescent elastomer,which can patterned-display the force trajectories.The deformable liquid metals used as stretchable electrode make the stress transfer stable through overall device to achieve outstanding mechanoluminescence(with a gray value of 107 under a stimulus force as low as 0.3 N and more than 2000 cycles reproducibility).Moreover,a microstructured surface is constructed which endows the resulted composite with significantly improved triboelectric performances(voltage increases from 8 to 24 V).Based on the excellent bimodal sensing performances and durability of the obtained composite,a highly reliable intelligent control system by machine learning has been developed for controlling trolley,providing an approach for advanced visual interaction devices and smart wearable electronics in the future IoT era.

Epidermal self-powered sweat sensors for glucose and lactate monitoring

Sweat could be a carrier of informative biomarkers for health status identification;therefore,wearable sweat sensors have attracted significant attention for research.An external power source is an important component of wearable sensors,however,the current power supplies,i.e.,batteries,limit further shrinking down the size of these devices and thus limit their application areas and scenarios.Herein,we report a stretchable self-powered biosensor with epidermal electronic format that enables the in situ detec-tion of lactate and glucose concentration in sweat.Enzymatic biofuel cells serve as self-powered sensing modules allowing the sweat sensor to exhibit a determination coefficient(R2)of 0.98 with a sensitivity of 2.48 mV/mM for lactate detection,and R2 of 0.96 with a sensitivity of 0.11 mV/μM for glucose detection.The microfluidic channels developed in an ultra-thin soft flexible polydimethylsiloxane layer not only enable the effective collection of sweat,but also provide excellent mechanical properties with stable performance output even under 30%stretching.The presented soft sweat sensors can be integrated at nearly any location of the body for the continuous monitoring of lactate and glucose changes during normal daily activities such as exercise.Our results provide a promising approach to develop next-generation sweat sensors for real-time and in situ sweat analysis.

Oxidative Molecular Layer Deposition Tailoring Eco-Mimetic Nanoarchitecture to Manipulate Electromagnetic Attenuation and Self-Powered Energy Conversion

Advanced electromagnetic devices,as the pillars of the intelligent age,are setting off a grand transformation,redefining the structure of society to present pluralism and diversity.However,the bombardment of electromagnetic radiation on society is also increasingly serious along with the growing popularity of"Big Data".Herein,drawing wisdom and inspiration from nature,an eco-mimetic nanoarchitecture is constructed for the first time,highly integrating the advantages of multiple components and structures to exhibit excellent electromagnetic response.Its electromagnetic properties and internal energy conversion can be flexibly regulated by tailoring microstructure with oxidative molecular layer deposition(oMLD),providing a new cognition to frequency-selective microwave absorption.The optimal reflection loss reaches≈−58 dB,and the absorption frequency can be shifted from high frequency to low frequency by increasing the number of oMLD cycles.Meanwhile,a novel electromagnetic absorption surface is designed to enable ultra-wideband absorption,covering almost the entire K and Ka bands.More importantly,an ingenious self-powered device is constructed using the eco-mimetic nanoarchitecture,which can convert electromagnetic radiation into electric energy for recycling.This work offers a new insight into electromagnetic protection and waste energy recycling,presenting a broad application prospect in radar stealth,information communication,aerospace engineering,etc.

A Self-Powered Nanogenerator for the Electrical Protection of Integrated Circuits from Trace Amounts of Liquid

With the increase in the use of electronic devices in many different environments,a need has arisen for an easily implemented method for the rapid,sensitive detection of liquids in the vicinity of electronic components.In this work,a high-performance power generator that combines carbon nanoparticles and TiO2 nanowires has been fabricated by sequential electrophoretic deposition(EPD).The opencircuit voltage and short-circuit current of a single generator are found to exceed 0.7 V and 100μA when 6μL of water was applied.The generator is also found to have a stable and reproducible response to other liquids.An output voltage of 0.3 V was obtained after 244,876,931,and 184μs,on exposure of the generator to 6μL of water,ethanol,acetone,and methanol,respectively.The fast response time and high sensitivity to liquids show that the device has great potential for the detection of small quantities of liquid.In addition,the simple easily implemented sequential EPD method ensures the high mechanical strength of the device.This compact,reliable device provides a new method for the sensitive,rapid detection of extraneous liquids before they can impact the performance of electronic circuits,particularly those on printed circuit board.

Perovskite-Inspired Lead-Free Ag2BiI5 for Self-Powered NIR-Blind Visible Light Photodetection

In recent years,solution-processible semiconductors with perovskite or perovskite-inspired structures have been extensively investigated for optoelectronic applications.In particular,silver-bismuth-halides have been identified as especially promising because of their bulk properties and lack of heavily toxic elements.This study investigates the potential of Ag2BiI5 for near-infrared(NIR)-blind visible light photodetection,which is critical to emerging applications(e.g.,wearable optoelectronics and the Internet of Things).Self-powered photodetectors were realized and provided a near-constant≈100 mA W−1 responsivity through the visible,a NIR rejection ratio of>250,a long-wavelength responsivity onset matching standard colorimetric functions,and a linear photoresponse of>5 orders of magnitude.The optoelectronic characterization of Ag2BiI5 photodetectors additionally revealed consistency with one-center models and the role of the carrier collection distance in self-powered mode.This study provides a positive outlook of Ag2BiI5 toward emerging applications on low-cost and low-power NIR-blind visible light photodetector.

Self-powered circularly polarized light detector based on asymmetric chiral metamaterials

Circularly polarized light(CPL)has been given great attention because of its extensive application.While several devices for CPL detection have been studied,their performance is affected by the magnitude of photocurrent.In this paper,a self-powered photodetector based on hot electrons in chiral metamaterials is proposed and optimized.CPL can be distinguished by the direction of photocurrent without external bias owing to the interdigital electrodes with asymmetric chiral metamaterials.Distinguished by the direction of photocurrent,the device can easily detect the rotation direction of the CPL electric field,even if it only has a very weak responsivity.The responsivity of the proposed detector is near 1.9 mA/W at the wavelength of 1322 nm,which is enough to distinguish CPL.The detector we proposed has the potential for application in optical communication.

Self-healing wearable self-powered deep ultraviolet photodetectors based on Ga_(2)O_(3)

Gallium oxide(Ga_(2)O_(3))based flexible heterojunction type deep ultraviolet(UV)photodetectors show excellent solar-blind photoelectric performance,even when not powered,which makes them ideal for use in intelligent wearable devices.How-ever,traditional flexible photodetectors are prone to damage during use due to poor toughness,which reduces the service life of these devices.Self-healing hydrogels have been demonstrated to have the ability to repair damage and their combination with Ga_(2)O_(3) could potentially improve the lifetime of the flexible photodetectors while maintaining their performance.Herein,a novel self-healing and self-powered flexible photodetector has been constructed onto the hydrogel substrate,which exhibits an excellent responsivity of 0.24 mA/W under 254 nm UV light at zero bias due to the built-in electric field originating from the PEDOT:PSS/Ga_(2)O_(3) heterojunction.The self-healing of the Ga_(2)O_(3) based photodetector was enabled by the reversible property of the synthesis of agarose and polyvinyl alcohol double network,which allows the photodetector to recover its original configu-ration and function after damage.After self-healing,the photocurrent of the photodetector decreases from 1.23 to 1.21μA,while the dark current rises from 0.95 to 0.97μA,with a barely unchanged of photoresponse speed.Such a remarkable recov-ery capability and the photodetector’s superior photoelectric performance not only significantly enhance a device lifespan but also present new possibilities to develop wearable and intelligent electronics in the future.

A self-powered sensitive ultraviolet photodetector based on epitaxial graphene on silicon carbide

A self-powered graphene-based photodetector with high performance is particularly useful for device miniaturization and to save energy.Here,we report a graphene/silicon carbide（SiC）-based self-powered ultraviolet photodetector that exhibits a current responsivity of 7.4 m A/W with a response frequency of over a megahertz under 325-nm laser irradiation.The built-in photovoltage of the photodetector is about four orders of magnitude higher than previously reported results for similar devices.These favorable properties are ascribed to the ingenious device design using the combined advantages of graphene and SiC,two terminal electrodes,and asymmetric light irradiation on one of the electrodes.Importantly,the photon energy is larger than the band gap of SiC.This self-powered photodetector is compatible with modern semiconductor technology and shows potential for applications in ultraviolet imaging and graphene-based integrated circuits.