Paleoenvironmental reconstruction and organic matter accumulation of the paleogene shahejie oil shale in the Zhanhua Sag, Bohai Bay Basin, Eastern China

The controlling factors of organic-rich shale accumulation is essential for the exploration and development of shale oil and gas resources.The sedimentary environment plays a vital role in the formation of organic-rich sediments in lacustrine facies.This article unravels the mineralogy,geochemistry,and paleoenvironmental evolution during the deposition of the Paleogene Shahejie Formation(Es_(3)^(L)).It discusses the effects of paleoclimate,paleosalinity,paleoredox conditions,paleowater depth,and paleoproductivity on organic matter(OM)enrichment.Finally,the OM enrichment model was established.The results show that the mineralogical compositions are mainly composed of calcite(avg.40.13%),quartz(avg.21.64%)and clay minerals(avg.24.07%),accompanied by dolomite(avg.7.07%),feldspar(avg.6.36%)and pyrite(avg.2.95%).The Es_(3)^(L) shale has a high abundance of OM,with total organic carbon(TOC)ranging from 1.07%to 5.12%.The organic matter type is mainly composed of type I-II_(1) kerogen,which is generally considered a good-quality source rock.The source of OM is a mixture of lower bacteria,algae,and plants.During the early sedimentary period,the paleoclimate was dry and cold,with high salinity,intense reducibility,and relatively low productivity.During the late sedimentary period,the climate became warmer and more humid.As a result,the salinity decreased to a level that was suitable for biological reproduction,and productivity increased gradually due to the input of terrigenous plants.Paleosalinity and paleoclimate determined the environment of the sedimentary period,in addition,paleoproductivity and paleoredox condition indicated the formation and preservation conditions of OM.The warm and humid climate,brackish water,suitable reduction conditions and high productivity are the favorable conditions for the generation and preservation of organic matter.The research results may have implications for the genetic mechanisms of organic matter accumulation.They will provide theoretical and technical insights into the exploration and development of shale oil.

Paleosalinity reconstruction in offshore lacustrine basins based on elemental geochemistry:a case study of Middle Upper Eocene Shahejie Formation,Zhanhua Sag,Bohai Bay Basin

Salinity is a crucial property of water body and is essential for the restoration of paleoecology and paleoenvironment.However,the theoretical method of application of elemental geochemical proxies to paleosalinity reconstruction is still underdeveloped.Moreover,accurate determination and reconstruction of paleosalinity and its variation in an offshore lacustrine basin have been extremely challenging thus far.This study presents detailed elemental geochemical investigations from the Zhanhua Sag in the southern Bohai Bay Basin to reconstruct the salinity variation in the Paleogene Eocene Shahejie Formation(50.8-33.9 Ma).Based on the variation of strontium barium ratio(Sr/Ba)and boron gallium ratio(B/Ga),we determined three typical salinity types of water body:salty water(Sr/Ba>0.5,B/Ga>6),brackish water(0.2<Sr/Ba<0.5,3<B/Ga<6),and fresh water(Sr/Ba<0.2,B/Ga<3),after eliminating carbonate-sourced strontium(Sr).The salinity values following Couch’s paleosalinometer r anged from 3.1 to 11.9,reflecting the overall characteristics of oligohaline(0.5<salinity value<5)to mesohaline(5<salinity value<18)brackish water.All proxies yielded similar trends in paleosalinity variation,demonstrating a clear trend of rising and then declining from 50.8 Ma to 33.9 Ma.We considered that the B/Ga ratio had the highest reliability and resolution in determining the salinity types of water body in the study area.The environmental factors causing paleosalinity variation were also thoroughly analysed based on the temporal relationship among the salinity types of watermasses,paleoclimate characteristics from pollen records,and marine transgression events from marine fossils.Our research established a model of paleoclimatic and eustatic mechanisms to explain paleosalinity variation,providing reasonable and integral driving forces for the salinity variation of all offshore lacustrine basins.

Igneous intrusion contact metamorphic system and its reservoir characteristics:A case study of Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin,China

Taking the Paleogene Shahejie Formation in Nanpu sag of Bohai Bay Basin as an example,this study comprehensively utilizes seismic,mud logging,well logging,physical property analysis and core thin section data to investigate the metamorphic reservoir formed by contact metamorphism after igneous rock intrusion.(1)A geological model of the igneous intrusion contact met amorphic system is proposed,which can be divided into five structural layers vertically:the intrusion,upper metamorphic aureole,lower metamorphic aureole,normal sedimentary layers on the roof and floor.(2)The intrusion is characterized by xenoliths indicating intrusive facies at the top,regular changes in rock texture and mineral crystallization from the center to the edge on a microscopic scale,and low-angle oblique penetrations of the intrusion through sedimentary strata on a macroscopic scale.The metamorphic aureole has characteristics such as sedimentary rocks as the host rock,typical palimpsest textures developed,various low-temperature thermal metamorphic minerals developed,and medium-low grade thermal metamorphic rocks as the lithology.(3)The reservoir in contact metamorphic aureole has two types of reservoir spaces:matrix pores and fractures.The matrix pores are secondary"intergranular pores"distributed around metamorphic minerals after thermal metamorphic transformation in metasandstones.The fractures are mainly structural fractures and intrusive compressive fractures in metamudstones.The reservoirs generally have three spatial distribution characteristics:layered,porphyritic and hydrocarbon impregnation along fracture.(4)The distribution of reservoirs in the metamorphic aureole is mainly controlled by the intensity of thermal baking.Furthermore,the distribution of favorable reservoirs is controlled by the coupling of favorable lithofacies and thermal contact metamorphism,intrusive compression and hydrothermal dissolution.The proposal and application of the geological model of the intrusion contact metamorphic system are expected to promote the discovery of exploration targets of contact metamorphic rock in Nanpu sag,and provide a reference for the study and exploration of deep contact metamorphic rock reservoirs in the Bohai Bay Basin.

Structural characteristics of continental carbonate-rich shale and shale oil movability: A case study of the Paleogene Shahejie Formation shale in Jiyang Depression, Bohai Bay Basin, China

Based on rock mineral and geochemical analysis, microscopic observation, physical property measurement, and thin laminae separation test, etc., the characteristics of typical laminae of the Paleogene Shahejie Formation carbonate-rich shale in the Jiyang Depression were analyzed, and the organic matter abundance, reservoir properties, and oil-bearing properties of different laminae were compared. Typical shale storage-seepage structures were classified, and the mobility of oil in different types of shale storage-seepage structure was compared. The results show that the repeated superposition of mud laminae and calcite laminae are the main layer structure of carbonate-rich shales. The calcite laminae are divided into micritic calcite laminae, sparry calcite laminae and fibrous calcite vein. The mud-rich laminae are the main contributor to the organic matter abundance and porosity of shale, with the best hydrocarbon generation potential, reservoir capacity, and oil-bearing property. The micritic calcite laminae also have relatively good hydrocarbon generation potential, reservoir capacity and oil-bearing property. The sparry calcite laminae and fibrous calcite vein have good permeability and conductivity. Four types of shale storage-seepage structure are developed in the carbonate-rich shale, and the mobility of oil in each type of storage-seepage structure is in descending order: sparry calcite laminae enriched shale storage-seepage structure, mixed calcite laminae enriched shale storage-seepage structure, fibrous calcite vein enriched shale storage-seepage structure, and micritic calcite laminae enriched shale storage-seepage structure. The exploration targets of carbonate-rich shale in the Jiyang Depression Shahejie Formation are different in terms of storage-seepage structure at different thermal evolution stages.

The coupling of dynamics and permeability in the hydrocarbon accumulation period controls the oil-bearing potential of low permeability reservoirs:a case study of the low permeability turbidite reservoirs in the middle part of the third member of Shahejie

The relationships between permeability and dynamics in hydrocarbon accumulation determine oil- bearing potential （the potential oil charge） of low perme- ability reservoirs. The evolution of porosity and permeability of low permeability turbidite reservoirs of the middle part of the third member of the Shahejie Formation in the Dongying Sag has been investigated by detailed core descriptions, thin section analyses, fluid inclusion analyses, carbon and oxygen isotope analyses, mercury injection, porosity and permeability testing, and basin modeling. The cutoff values for the permeability of the reservoirs in the accumulation period were calculated after detailing the accumulation dynamics and reservoir pore structures, then the distribution pattern of the oil-bearing potential of reservoirs controlled by the matching relationship between dynamics and permeability during the accumulation period were summarized. On the basis of the observed diagenetic features and with regard to the paragenetic sequences, the reservoirs can be subdivided into four types of diagenetic facies. The reservoirs experienced two periods of hydro- carbon accumulation. In the early accumulation period, the reservoirs except for diagenetic facies A had middle to high permeability ranging from 10 × 10-3 gm2 to 4207 × 10-3 lain2. In the later accumulation period, the reservoirs except for diagenetic facies C had low permeability ranging from 0.015 × 10-3 gm2 to 62× 10-3 -3m2. In the early accumulation period, the fluid pressure increased by the hydrocarbon generation was 1.4-11.3 MPa with an average value of 5.1 MPa, and a surplus pressure of 1.8-12.6 MPa with an average value of 6.3 MPa. In the later accumulation period, the fluid pressure increased by the hydrocarbon generation process was 0.7-12.7 MPa with an average value of 5.36 MPa and a surplus pressure of 1.3-16.2 MPa with an average value of 6.5 MPa. Even though different types of reservoirs exist, all can form hydrocarbon accumulations in the early accumulation per- iod. Such types of reservoirs can form hydrocarbon accumulation with high accumulation dynamics; however, reservoirs with diagenetic facies A and diagenetic facies B do not develop accumulation conditions with low accumu- lation dynamics in the late accumulation period for very low permeability. At more than 3000 m burial depth, a larger proportion of turbidite reservoirs are oil charged due to the proximity to the source rock, Also at these depths, lenticular sand bodies can accumulate hydrocarbons. At shallower depths, only the reservoirs with oil-source fault development can accumulate hydrocarbons. For flat surfaces, hydrocarbons have always been accumulated in the reservoirs around the oil-source faults and areas near the center of subsags with high accumulation dynamics.

Occurrence mechanism of lacustrine shale oil in the Paleogene Shahejie Formation of Jiyang Depression, Bohai Bay Basin, China

To determine the occurrence mechanism and mobility of shale oil in the Shahejie Formation in the Jiyang Depression, organic geochemistry analysis, thin-section petrological observation, low-temperature nitrogen adsorption, high-pressure mercury intrusion porosimetry, field emission scanning electron microscopy experiments were conducted on shale samples to reveal its storage mechanism, including pore size, ratio of adsorbed oil to free oil, mobility and its influencing factors, and mode of storage. Residual shale oil is mainly present in pores less than 100 nm in diameter under the atmospheric temperature and pressure. The lower limit of pore size for free oil is 5 nm, and the lower limit of pore size for movable oil occurrence is about 30 nm. The light components, low TOC and high porosity are the main factors contributing to the high proportion of movable oil. Each type of pore can contain residual shale oil, but not all pores have shale oil. Pore connectivity and surface wettability are the determinants of shale oil enrichment degree and enrichment state.

Shale Lithofacies and Sedimentary Environment of the Third Member,Shahejie Formation,Zhanhua Sag,Eastern China

Researches into shale lithofacies,their sedimentary environments and relationship benefit understanding both of sedimentary cycle division and unconventional hydrocarbon exploration in lacustrine basins.Based on a 100~300-m-thick dark shale,mudstone and limestone encountered in the lower third member of the Eocene Shahejie Formation(Es3l member)in Zhanhua Sag,Bohai Bay Basin,eastern China,routine core analysis,thin sectioning,scanning electron microscopy(SEM),mineralogical and geochemical measurements were used to understand detailed facies characterization and paleoclimate in the member.This Es3l shale sediment includes three sedimentary cycles(C3,C2 and C1),from bottom to top,with complex sedimentary characters and spatial distribution.In terms of the composition,texture,bedding and thickness,six lithofacies are recognized in this succession.Some geochemical parameters,such as trace elements(Sr/Ba,Na/Al,V/Ni,V/(V+Ni),U/Th),carbon and oxygen isotopes(δ^(18)O,δ^(13)C),and total organic carbon content(TOC)indicate that the shales were deposited in a deep to semi-deep lake,with the water column being salty,stratified,enclosed and reductive.During cycles C3 and C2 of the middle-lower sections,the climate was arid,and the water was salty and stratified.Laminated and laminar mudstone-limestone was deposited with moderate organic matter(average TOC 1.8%)and good reservoir quality(average porosity 6.5%),which can be regarded as favorable reservoir.During the C1 cycle,a large amount of organic matter was input from outside the basin and this led to high productivity with a more humid climate.Massive calcareous mudstone was deposited,and this is characterized by high TOC(average 3.6%)and moderate porosity(average 4%),and provides favorable source rocks.

Identification and geochemical significance of unusual C24 tetracyclic terpanes in Shahejie Formation source rocks in the Bozhong subbasin,Bohai Bay Basin

C_(24)tetracyclic terpanes are common compounds in source rocks and crude oils,and C_(24)17,21-secohopane is the most common and widely used source-related indicator.In this study,three unusual C_(24)tetracyclic terpanes were detected on the m/z 191 chromatogram of saturated hydrocarbons in the Shahejie Formation source rocks in the Bozhong subbasin.Based on the mass spectra characteristics,diagnostic ion fragments,retention time and comparisons with published literature,three unusual C_(24)tetracyclic terpanes were identified as 10β(H)-des-A-oleanane,10β(H)-des-A-lupane and C_(24)des-Ahopane.To the best of our knowledge,this is the first study to detect and publicly report these three compounds in source rock samples from the Shahejie Formation of the Bozhong subbasin,Bohai Bay Basin.The results indicated that 10β(H)-des-A-oleanane and 10β(H)-des-A-lupane likely originated from terre strial angiosperms,while C_(24)des-A-hopane likely originated fro m prokaryotic o rganisms.Te rrestrial angiosperms provide the material basis for the generation of compounds A and B,and the distribution and concentration of these two compounds are affected by thermal maturity.In the low maturity stage(0.5%<R_(0)<0.7%),compounds A and B are relatively enriched in the source rocks.

Origin of Quartz Cement in the Paleogene Sandstone Reservoir of Shahejie Formation,Bohai Bay Basin,China

The precipitation of authigenic quartz plays a significant role to reduce the reservoir characteristics and enhance the stiffness of the rock.The Es_(1) sandstone of Shahejie Formation is acting as a significant hydrocarbon producing rock in the Nanpu Sag.Various methods like thin section petrography,cathodoluminescence(CL),scanning electron microscope(SEM,with EDS),and electron microprobe analysis has been used to reveal the origin of quartz cement as well as to evaluate the effect of quartz cement on reservoir quality.The studied sandstone is classified as immature to mature feldspathic litharenite and lithic arkose and consists of quartz,feldspar,rock fragments and micas.Petrographic studies and SEM analysis shows that the authigenic quartz is acting a significant cement that reduces the reservoir quality.Whereas clay minerals(kaolinite and mixed layer illite to smectite)are dominant in the Es_(1) sandstone,that can reduce the reservoir quality.SEM,CL and thin section analysis reveal that there are two stages of quartz cement in the studied samples;that are pore filling authigenic cement and quartz overgrowth cement.Fluid inclusion homogenization temperatures shows that stages of quartz cement were developed with continuous process from 70℃ to 130℃.Quartz cements were generally originated from I/S reaction,feldspar dissolution,conversion of rock fragments and pressure solution.Feldspar dissolution(K-feldspar)and kaolinite to illite reaction is an insignificant silica source for the silica cement which is internally precipitated in a close system with diffusion transporting mechanism.Overall,quartz cement significantly enhance the rock strengthen and brittleness effectively as well as it reduce the overall reservoir quality.

Reservoirs properties of slump-type sub-lacustrine fans and their main control factors in first member of Paleogene Shahejie Formation in Binhai area, Bohai Bay Basin, China

High-yielding oil wells were recently found in the first member of Paleogene Shahejie Formation,the Binhai area of Qikou Sag,providing an example of medium-and deep-buried high-quality reservoirs in the central part of a faulted lacustrine basin.By using data of cores,cast thin sections,scanning electron microscope and physical property tests,the sedimentary facies,physical properties and main control factors of the high-quality reservoirs were analyzed.The reservoirs are identified as deposits of slump-type sub-lacustrine fans,which are marked by muddy fragments,slump deformation structure and Bouma sequences in sandstones.They present mostly medium porosity and low permeability,and slightly medium porosity and high permeability.They have primary intergranular pores,intergranular and intragranular dissolution pores in feldspar and detritus grains,and structural microcracks as storage space.The main factors controlling the high quality reservoirs are as follows:(1)Favorable sedimentary microfacies of main and proximal distributary gravity flow channels.The microfacies with coarse sediment were dominated by transportation and deposition of sandy debris flow,and the effect of deposition on reservoir properties decreases with the increase of depth.(2)Medium texture maturity.It is shown by medium-sorted sandstones that were formed by beach bar sediment collapsing and redepositing,and was good for the formation of the primary intergranular pores.(3)High content of intermediate-acid volcanic rock detritus.The reservoir sandstone has high content of detritus of various components,especially intermediate-acid volcanic rock detritus,which is good for the formation of dissolution pores.(4)Organic acid corrosion.It was attributed to hydrocarbon maturity during mesodiagenetic A substage.(5)Early-forming and long lasting overpressure.A large-scale overpressure compartment was caused by under-compaction and hydrocarbon generation pressurization related to thick deep-lacustrine mudstone,and is responsible for the preservation of abundant primary pores.(6)Regional transtensional tectonic action.It resulted in the structural microcracks.

Formation of inter-salt overpressure fractures and their significances to shale oil and gas: A case study of the third member of Paleogene Shahejie Formation in Dongpu sag, Bohai Bay Basin

Taking the inter-salt organic-rich shales in the third member of Paleogene Shahejie Formation(Es3)of Dongpu sag in Bohai Bay Basin as an example,the origin of overpressure,development characteristics,formation and evolution mechanism,formation stages and geological significance on shale oil and gas of overpressure fractures in the inter-salt shale reservoir were investigated by means of thin section identification,scanning electron microscopy observation,analysis of fluid inclusions,logging data analysis,and formation pressure inversion.The results show that overpressure is universal in the salt-lake basin of Dongpu sag,and under-compaction caused by the sealing of salt-gypsum layer,pressurization due to hydrocarbon generation,transformation and dehydration of clay minerals,and fault sealing are the 4 main factors leading to the occurrence of overpressure.The overpressure fractures are small in scale,with an average length of 356.2μm and an average underground opening of 11.6μm.But they are densely developed,with an average surface density of 0.76 cm/cm2.Moreover,they are often accompanied by oil and gas charging,and thus high in effectiveness.Overpressure fractures were mainly formed during two periods of large-scale oil and gas charging,approximately 25-30 Ma ago and 0-5 Ma ago.Inter-salt overpressure fractures play dual roles as the storage space and migration paths of shale oil and gas.They contribute 22.3%to the porosity of shale reservoir and 51.4%to the permeability.They can connect fracture systems of multiple scales,greatly improving the quality of shale reservoir.During the development of shale oil and gas,inter-salt overpressure fractures can affect the extension and morphology of hydraulic fractures,giving rise to complex and highly permeable volumetric fracture networks,improving hydraulic fracturing effect and enhancing shale oil and gas productivity.

Hydrocarbon Reservoir Model of Glutenite in the Fourth Member of Shahejie Formation in Northern Dongying Depression

The glutenite in the fourth member of Shahejie Formation(Es^4) in northern Dongying depression straightforwardly penetrated into the muddy bathyal -abyss facies.The conditions of reservoir is very superior:(1) the high quality thick bedded oil source rock is developed very well in the Lijin sag and Minfeng sag of the study area,and it has the higher capability of generating hydrocarbon;(2) the

Effect of Shale Reservoir Characteristics on Shale Oil Movability in the Lower Third Member of the Shahejie Formation, Zhanhua Sag

To reveal the effect of shale reservoir characteristics on the movability of shale oil and its action mechanism in the lower third member of the Shahejie Formation(Es3l), samples with different features were selected and analyzed using N2 adsorption, high-pressure mercury injection capillary pressure(MICP), nuclear magnetic resonance(NMR), high-speed centrifugation, and displacement image techniques. The results show that shale pore structure characteristics control shale oil movability directly. Movable oil saturation has a positive relationship with pore volume for radius > 2 μm, as larger pores often have higher movable oil saturation, indicating that movable oil is present in relatively larger pores. The main reasons for this are as follows. The relatively smaller pores often have oil-wetting properties because of organic matter, which has an unfavorable effect on the flow of oil, while the relatively larger pores are often wetted by water, which is helpful to shale oil movability. The rich surface provided by the relatively smaller pores is beneficial to the adsorption of immovable oil. Meanwhile, the relatively larger pores create significant pore volume for movable oil. Moreover, the larger pores often have good pore connectivity. Pores and fractures are interconnected to form a complex fracture network, which provides a good permeability channel for shale oil flow. The smaller pores are mostly distributed separately;thus, they are not conducive to the flow of shale oil. The mineral composition and fabric macroscopically affect the movability of shale oil. Calcite plays an active role in shale oil movability by increasing the brittleness of shale and is more likely to form micro-cracks under the same stress background. Clay does not utilize shale oil flow because of its large specific surface area and its block effect. The bedding structure increases the large-scale storage space and improves the connectivity of pores at different scales, which is conducive to the movability of shale oil.

Lake Sequence Stratigraphy of the Shahejie Formation in the Zhanhua Hollow, Shandong Province

Two sequences can be identified in the sedimentary strata of the lower Tertiary ShahejieFormation in the Zhanhua hollow. The lowstand, lake-transgressive and highstand systemstracts were formed under the control of ancient structure, palaeotopography, palaeoclimate, sed-iment supply, marine-transgression, and so on. In the paper the authors present a composite se-quence stratigraphical section of the Shahejie Formation in this area, and expound the bounda-ries of parasequences, parasequences set and systems tracts and evolutions of lake sequencestratigraphy and sedimentology and discuss various factors controlling the lake level fluctuation.The differences between lake and marine sequence stratigraphy are also indicated in the paper.The lake sequence stratigraphical study should be based on a synthetic analysis of structural evo-lution, palaeomagnetism, palaeoclimatic changes, geological Well logs, seismic and logging data,palaeontological data, global sea level changes, and so on. The sequence stratigraphical evolutionis closely related to the formation, development and elimination of the whole basin and thesedimentary process.

Paleosalinity and Its Association with Organic Matter: A Case Study from the Eocene Shahejie Formation, Laizhou Bay Sag, Bohai Bay Basin (China)

Paleosalinity is vital for the paleoenvironmental reconstruction and affects the formation of source rock.The lower-middle sections of the third member of Eocene Shahejie formation(Es3M-L)constitute the most important source rock layer in Laizhou Bay Sag.However,the paleosalinity of the depositional water in which Es3M-L submembers are deposited remains unclear.A series of integrated experiments,including major and trace elements,X-ray diffraction,total organic carbon,and Rock-Eval,was performed to reveal the paleosalinity and its relationship with organic matter(OM).Various inorganic proxies(Sr/Ba,Rb/K,B/Ga,Walker’s paleosalimeter,Adam’s paleosalimeter,and Couch’s paleosalimeter)were employed to determine the paleosalinity of samples.Prominent differences existed in the proxies.Couch’s paleosalimeter is the most reliable and qualitative approach for Laizhou Bay Sag.Samples from the lake center(depocenter)and margin showed paleosalinities from 4.92 wt‰to 9.73 wt‰,suggesting a ubiquitous brackish(oligohaline-mesohaline)water body in the paleolake.Molybdenum enrichment in samples indicates an oxygen-depleted(suboxic or anoxic)condition.The increase in salinity has a certain but non-significant positive correlation with oxygen reduction.This condition may be attributed to the weak stratification of the water column in brackish water bodies.Moreover,paleosalinity has a weak and indirect relationship with OM accumulation during the deposition of Es3M-L submembers in Laizhou Bay Sag.

Genetic Mechanism of the Dolomite in Dolomitic Glutenite of the Shahejie Formation—A Case Study of QHD 29-2 Oilfield in Bohai Bay Basin, China

The dolomite in dolomitic glutenite of the shahejie formation in the eastern steep slope of the Shijiutuo bulge in Bohai is a high-quality reservoir, and the content of dolomite is positively correlated with reservoir physical properties. In this paper, by using thin section, core, wall core, geochemical data and analyzing petrology and mineralogy characteristic, we systematically analyzed the paleogeographic environment and genetic mechanism of this kind of dolomite and established the genetic models. The dolomite in the glutenite body has many characteristics of development, which is formed by three kinds of genesis: quasi-synergy dolomitization, buried dolomitization and hydrothermal dolomitization. The dolomite in glutenite is produced in the form of matrix, grain (sandstone, oolith), biological skeleton (conch, ostracod), clastic shell and dolomite cement. The minor elements, carbon and oxygen isotopes, trace minerals and paleontological combinations reveal that the paleogeographic environment was closed continental salt-brackish water bay, the climate was arid and hot, and the evaporation was strong. It provides favorable conditions for the production of the dolomite in dolomitic glutenite. There are three genetic models of dolomite. The first model is penecontemporaneous dolomitization. The climate was arid and hot, the aragonite and high-magnesium calcite deposited with sand and gravel. Due to the effect of evaporation, dolomitization occurred. The second model is buried dolomitization. The water from dehydration of clay minerals causes the Mg2+ in the high-magnesium formation migrating into the rock, leading to the occurrence of dolomitization. The third model is hydrothermal dolomitization. Deep faults can bring geothermal fluids into the overlying reservoir and form the hydrothermal dolomite.

Impact of volcanism on the formation and hydrocarbon generation of organic-rich shale in the Jiyang Depression, Bohai Bay Basin, China

Globally,most organic-rich shales are deposited with volcanic ash layers.Volcanic ash,a source for many sedimentary basins,can affect the sedimentary water environment,alter the primary productivity,and preserve the organic matter(OM)through physical,chemical,and biological reactions.With an increasing number of breakthroughs in shale oil exploration in the Bohai Bay Basin in recent years,less attention has been paid to the crucial role of volcanic impact especially its influence on the OM enrichment and hydrocarbon formation.Here,we studied the petrology,mineralogy,and geochemical characteristics of the organic-rich shale in the upper submember of the fourth member(Es_(4)^(1))and the lower submember of the third member(Es_(3)^(3))of the Shahejie Formation,aiming to better understand the volcanic impact on organic-rich shale formation.Our results show that total organic carbon is higher in the upper shale intervals rich in volcanic ash with enriched light rare earth elements and moderate Eu anomalies.This indicates that volcanism promoted OM formation before or after the eruption.The positive correlation between Eu/Eu*and Post-Archean Australian Shale indicates hydrothermal activity before the volcanic eruption.The plane graph of the hydrocarbon-generating intensity(S1+S2)suggests that the heat released by volcanism promoted hydrocarbon generation.Meanwhile,the nutrients carried by volcanic ash promoted biological blooms during Es_(4)^(1 )and Es_(3)^(3) deposition,yielding a high primary productivity.Biological blooms consume large amounts of oxygen and form anoxic environments conducive to the burial and preservation of OM.Therefore,this study helps to further understand the organic-inorganic interactions caused by typical geological events and provides a guide for the next step of shale oil exploration and development in other lacustrine basins in China.

Division and Characteristics of Shale Parasequences in the Upper Fourth Member of the Shahejie Formation, Dongying Depression, Bohai Bay Basin, China

Shale parasequence analysis is an important part of sequence stratigraphy sudies. This paper proposed a systematic research method for analyzing shale parasequences including their delineation, division, characteristics and origins. The division method is established on the basis of lithofacies. Multi-method analysis and mutual verification were implemented by using auxiliary indicators（such as mineral compositions, geochemical indicators and wavelet values）. A typical shale parasequence comprises a lower interval of deepening water-depth and an upper interval of shallowing water-depth（e.g., a shale parasequence including a high-total organic carbon（TOC） shale-low-TOC limy shale）. Abrupt increases in pyrite content, TOC value, relative hydrocarbon generation potential（（S1＋S2）/TOC）, and wavelet values are indicative of parasequence boundaries. The proposed research method was applied to study the upper fourth member of the Shahejie Formation in the Dongying depression, Bohai Bay Basin. Results show that there were seven types of parasequences developed. A singular and a dual structured parasequences were identified. Three factors controlling the development of the shale parasequences were identified including relative lake level change, terrestrial input and transgression. The development of high-TOC（〉2%） shale parasequences was mainly controlled by biological and chemical sedimentation. The low-TOC（〈2%） shale parasequences were mainly deposited by chemical sedimentation. The diversities of shale parasequences were caused by four major controlling factors including climate, relative lake level change, terrestrial input and emergency（e.g., transgression）.

Architecture of Sandstone Bodies of Paleogene Shahejie Formation in Northern Qikou Sag, Northeast China

The conception of special geologic bodies has been applied in this study to define and illustrate economic oil and gas reservoirs in sandbodies, which is helpful for hydrocarbon forecast and exploration. Using the comprehensive analysis of drilling, logging, seismic, seismic attribute extraction, and logging constrained inversion in 3D data volume, the special geologic bodies of the Shahejie Formation（Ps^1s） in northern Qikou sag, which have good hydrocarbon potential, are identified and described under the constraint of sequence stratigraphic framework. The dimensions, geometry, and spatial distribution features of the special geologic bodies, as well as their inner architectures and sequence-structure patterns, are also ascertained. The geologic bodies evolved from relative centralization in the middle part of the lacustrine basin in the early stage of Ps1~s Formation, to several dispersive isolated parts in the later stage. This shows a small cycle interval（~2.5 Ma） at the end of the whole transgressive depositional process of Ps1（~7.5 Ma） during the expansion of the lake and relative lake level rise, with the control of sediments supply and fault-related subsidence, which effect the evolution of the sedimentary system. According to the relevance and regularity of the geologic bodies＇ development, different types of potential profitable reservoir traps, including the lithologic lenticular traps, lithologic updip pinchout traps, and structural-lithologic composite traps, can be preserved in the study area. In addition, the internal architecture models provide scientific basis for further hydrocarbon exploration in the frontier basin without enough data.

Quantitative reconstruction of the palaeoclimate of the Shahejie Formation in the Chezhen Depression,Bohai Bay Basin,eastern China

This paper uses pollen climate analysis and coexistence analysis to systematically analyze the climatic evolution of the Shahejie Formation in the Chezhen Depression,Bohai Bay Basin,eastern China and discusses the relationship between palaeoclimatic evolution and lake level rise.The results show that the sedimentary period of the Shahejie Formation in the Chezhen Depression had an overall temperature change trend from hot to cold and simultaneously experienced a dry and wet balance-wet-dry and wet balance-wet transition process.The climatic parameters of the Shahejie Formation in the Chezhen Depression include a mean annual temperature of 8.1℃-15.1℃,a mean coldest monthly temperature of-0.1℃-2℃,a mean warmest monthly temperature of 18.6℃-28℃,a mean annual precipitation of 389-1164 mm,a wettest monthly precipitation amount of 215-262 mm,and a driest monthly precipitation amount of 8-48 mm.Climate change is believed to affect the rise and fall of lake levels to some extent.The quantitative reconstruction of these climatic parameters allows researchers to more intuitively understand the geological background of the Chezhen Depression and guide the exploration and development of oil and gas resources.