Sedimentary environment and organic matter accumulation of Wufeng-Longmaxi shales,southwest Yangtze Plate,China:Insights from geochemical and petrological evidence

Upper Ordovician-Lower Silurian Wufeng-Longmaxi Formation is the most developed strata of shale gas in southern China.Due to the complex sedimentary environment adjacent to the Kangdian Uplift,the favorable area for organic-rich shale development is still undetermined.The authors,therefore,focus on the mechanism of accumulation of organic matter and the characterization of the sedimentary environment of the Wufeng-Longmaxi Shales to have a more complete understanding and new discovering of organic matter enrichment and favorable area in the marginal region around Sichuan Basin.Multiple methods were applied in this study,including thin section identification,scanning electron microscopy(SEM)observations and X-ray diffraction(XRD),and elemental analysis on outcrop samples.Five lithofacies have been defined according to the mineralogical and petrological analyses,including mudstone,bioclastic limestone,silty shale,dolomitic shale,and carbonaceous siliceous shale.The paleo-environments have been reconstructed and the organic enrichment mechanism has been identified as a reduced environment and high productivity.The Wufeng period is generally a suboxic environment and the early Longmaxi period is a reducing environment based on geochemical characterization.High dolomite content in the study area is accompanied by high TOC,which may potentially indicate the restricted anoxic environment formed by biological flourishing in shallower water.And for the area close to the Kangdian Uplift,the shale gas generation capability is comparatively favorable.The geochemical parameters implied that new favorable areas for shale gas exploration could be targeted,and more shale gas resources in the mountain-basin transitional zone might be identified in the future.

Trace and rare earth element geochemistry of the black and grey shales of the Calabar Flank, Southeastern Nigeria: constraints on the depositional environment and the degree of metal enrichment

This study focuses on the trace and rare earth elements(REE)geochemistry of the Nkporo and Ekenkpon Shales of the Calabar Flank.The main aim is to infer their depositional environment and the degree of their metal enrichment.The shale samples were analyzed using inductively coupled plasma mass spectrometry.The results indicated that the mean concentrations of K,Na,and Fe in Nkporo and Ekenkpon Shales are 1.45,0.4,and 4.17 wt%,and 1.11,0.44,and 5.42 wt%;respectively.The Nkporo Shale is enriched with the following trace elements;P>Mn>Sr>Ba>Zn>Ce>Rb>Zr>V>Cr>Ni and depleted in the following trace elements;Ta>Ge>Sb>Bi>Cd>Ag>Te>In>Hg.While the Ekenkpon Shale is enriched with the following trace elements;P>Mn>Ba>Sr>V>Ce>Zr>Rb>Cr>Zn>Ni and depleted in;Sb>Ge>Bi>Ag>Ce>Te>In>Hg.The concentration of redox-sensitive elements such as V,Ni,Mo,U,Cu,Cr,Re,Cd,Sb,Ti,Mn,and their ratio V/Mo and U/Mo in the black and grey shale samples show different patterns.The REE obtained from the Nkporo and Ekenkpon Shales were PAAS normalized.The Nkporo Shale showed a slightly flat light rare-earth element(LREE),middle rare-earth element(MREE),and heavy rare earth element(HREE)pattern enrichment.Ce/Ce*ranges from 0.95 to 1.09 in Nkporo Shale and 0.67 to 1.40 in Ekenkpon Shale.The Ekenkpon Shale showed a slight LREE,MREE enrichment,and depleted HREE patterns.The Mn contents and U/Mo ratio in Nkporo and Ekenkpon Shales suggests a poor oxygen transitional environment.The V/Mo and V/(V+Ni)ratios indicated that the Nkporo shales were deposited in an anoxic to suboxic conditions and Ekenkpon shales were also deposited under an anoxic to suboxic conditions.The V/Ni ratio indicated that the organic matter in the Nkporo shale is terrigenous while that of the Ekenkpon shales are both terrigenous and marine in origin.

Contrasting Depositional Environment of Iron Formation at Endengue Area, NW Congo Craton, Southern Cameroon: New Insights from Trace and Rare Earth Elements Geochemistry

The Endengue Banded Iron Formation (BIF) is located in the northwestern edge of the Congo craton in Cameroon. Here, we report geochemical data of trace and rare earth elements (REE) of the Endengue BIF samples from the Archean Ntem complex and investigate their environmental setting. Two types of BIF occur at Endengue area, both containing minimal contamination from terrestrial material. Total REE (ΣREE) contents in the Type 1 BIF are extremely low, ranging from 0.34 to 1.83 ppm, similarly to pure chemical sediments while Type 2 BIF displays ΣREE contents ranging from 2.98 to 24.26 ppm. The PAAS-normalized REE + Y patterns of the two BIF types display LREE enrichment relative to HREE and weak positive Eu anomaly, most likely suggesting that the source of iron and siliceous of the Endengue BIFs is mainly from the contribution of low-temperature hydrothermal alteration of the crust. Type 1 BIF shows very low Nd content (<1 ppm) with positive correlation between Nd and Ce/Ce* and positive Ce anomalies which suggests suboxic or anoxic seawater similar to the depositional environment of Elom BIF in Archean Ntem complex. In contrast, Type 2 BIF displays low to moderate Nd contents (1 and 100 ppm with the exception of sample LBR65) with negative correlation between Nd and Ce/Ce* and negative Ce anomalies. These features indicate precipatation of Type 2 BIF from oxic iron-rich solution that changed to oxidized surface by rapid precipitation of the hydrothermal Fe. The Endengue BIFs were deposited in the continental margin ocean in presence of low-temperature hydrothermal fluids mixed with seawater, similar to Paleoproterozoic Kpwa-Atog Boga BIFs within the Nyong group and other Paleoproterozoic Superior-type BIFs worldwide.

Role of Metallurgy in the Localized Corrosion of Carbon Steel

Localized residual strain develops within the metallurgical texture of 1018 carbon steel from metallurgical processes, such as fabrication, annealing, and shaping. This residual strain results in accelerated localized pitting due to the formation of anodic sites at these locations. Once initiated, micron-sized corrosion pits can coalesce to form sites of potential catastrophic failure. In this contribution, we focus on the localized biocorrosion which initiates and grows in areas of localized strain such as the interfaces between manganese sulfide (MnS) inclusions and ferrite grains in the steel, at grain boundaries between ferrite grains with different crystallographic orientations and at pearlite grains (intergrown cementite (Fe3C) and ferrite), which are readily found in 1018 carbon steel. Here we hypothesize and show experimentally that accelerated biocorrosion in 1018 carbon steel finds its roots in the electrochemical potential difference (micro galvanic cells) generated between the unstrained ferrite iron (α - Fe) and the lattice defects, dislocations and mismatches found at interfaces formed between α - Fe?and secondary phases i.e. MnS inclusions, cementite lamellar structures and grain boundaries distributed throughout the 3D network of the carbon steel. This hypothesis is supported by results from multiple micro- and nanoscale imaging and analytical methods obtained from field emission scanning electron microscopy, energy dispersive spectroscopy, electron backscattered diffraction and Auger nanoprobe electron spectroscopy. The morphology and composition of grains in the steel coupons were characterized before and after exposure to suboxic and sulfidogenic environments dominated by aerobic and anaerobic marine organisms. Corrosion processes are demonstrated to initiate in localized areas of high residual strain.