Temperature-swing adsorption(TSA)is an effective technique for CO_(2) capture,but the temperature swing procedure is energy-intensive.Herein,we report a low-energy-consumption system by combining passive radiative coo...Temperature-swing adsorption(TSA)is an effective technique for CO_(2) capture,but the temperature swing procedure is energy-intensive.Herein,we report a low-energy-consumption system by combining passive radiative cooling and solar heating for the uptake of CO_(2) on commercial activated carbons(CACs).During adsorption,the adsorbents are coated with a layer of hierarchically porous poly(vinylidene fluoride-co-hexafluoropropene)[P(VdF-HFP)HP],which cools the adsorbents to a low temperature under sunlight through radiative cooling.For desorption,CACs with broad absorption of the solar spectrum are exposed to light irradiation for heating.The heating and cooling processes are completely driven by solar energy.Adsorption tests under mimicked sunlight using the CACs show that the performance of this system is comparable to that of the traditional ones.Furthermore,under real sunlight irradiation,the adsorption capacity of the CACs can be well maintained after multiple cycles.The present work may inspire the development of new temperature swing procedures with little energy consumption.展开更多
In this paper,a control scheme based on current optimization is proposed for dual three-phase permanent-magnet synchronous motor(DTP-PMSM)drive to reduce the low-frequency temperature swing.The reduction of temperatur...In this paper,a control scheme based on current optimization is proposed for dual three-phase permanent-magnet synchronous motor(DTP-PMSM)drive to reduce the low-frequency temperature swing.The reduction of temperature swing can be equivalent to reducing maximum instantaneous phase copper loss in this paper.First,a two-level optimization aiming at minimizing maximum instantaneous phase copper loss at each electrical angle is proposed.Then,the optimization is transformed to a singlelevel optimization by introducing the auxiliary variable for easy solving.Considering that singleobjective optimization trades a great total copper loss for a small reduction of maximum phase copper loss,the optimization considering both instantaneous total copper loss and maximum phase copper loss is proposed,which has the same performance of temperature swing reduction but with lower total loss.In this way,the proposed control scheme can reduce maximum junction temperature by 11%.Both simulation and experimental results are presented to prove the effectiveness and superiority of the proposed control scheme for low-frequency temperature swing reduction.展开更多
This paper delves into the comparative study of tray and packed column pressure swing distillation systems, focusing on the separation of a ternary mixture containing ethanol, tetrahydrofuran (THF), and water. The stu...This paper delves into the comparative study of tray and packed column pressure swing distillation systems, focusing on the separation of a ternary mixture containing ethanol, tetrahydrofuran (THF), and water. The study particularly emphasizes the production of 99.5 w/w% tetrahydrofuran from the downstream product of 1,4-butanediol synthesis via diethyl maleate. Pro/II simulation software is utilized to explore various system configurations, including sieve trays, valve trays, and packed columns. Material and energy balances are performed to ascertain stream compositions and energy demands. The investigation encompasses the effects of column operating pressure on condenser and reboiler temperatures, as well as the implications of utility streams. A rigorous distillation model is employed to compare valve tray, sieve tray, and random packing (utilizing Norton Super Intalox) column designs by varying the number of trays, reflux ratio, and second distillation column pressure. Heat exchangers are integrated into the model, and their areas and utility flow rates are computed and integrated into the economic assessment. Economic analysis, guided by Net Present Value (NPV) calculations over a 20-year span, drives the selection of the most cost-effective design. Results demonstrate that while all designs are energy-efficient, the packed column system emerges as the most economical choice, offering a comprehensive framework for the separation process. Furthermore, optimal design configurations and operating conditions for both tray and packed column systems are outlined, providing valuable insights for industrial applications.展开更多
An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly desi...An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.展开更多
In 2022,the role of digital economy as a stabilizer and accelerator of the national economy was more prominent.Industry digitalization,which is driven by China’ s intelligent manufacturing,has become the main engine ...In 2022,the role of digital economy as a stabilizer and accelerator of the national economy was more prominent.Industry digitalization,which is driven by China’ s intelligent manufacturing,has become the main engine of China’ s digital economy development.As the core component of industrial digitalization,industrial e-commerce also developed in full swing.In the past three years,the COVID-19 pandemic has brought plenty of pressure to China’s industrial economy.展开更多
This paper sets up a robotic manipulator model on slewing crane. The model can synthetically describe the dynamic behavior of the load of slewing crane in rotating, elevating and hoisting motions. The dynamic equation...This paper sets up a robotic manipulator model on slewing crane. The model can synthetically describe the dynamic behavior of the load of slewing crane in rotating, elevating and hoisting motions. The dynamic equations of the system are recursively derived by a Newton Euler method. The dynamic behavior of the load of slewing crane in rotating motion is simulated on a computer. The method of robotic dynamics to derive the dynamic equations of the swing of load is accurate and convenient and it has good regularity. The result of the study provides a base in theory on design of crane and an accurate mathematical model for controlling the swing of load.展开更多
基金supported by the National Science Fund for Distinguished Young Scholars(22125804)the National Natural Science Foundation of China(21808110,22078155,and 21878149).
文摘Temperature-swing adsorption(TSA)is an effective technique for CO_(2) capture,but the temperature swing procedure is energy-intensive.Herein,we report a low-energy-consumption system by combining passive radiative cooling and solar heating for the uptake of CO_(2) on commercial activated carbons(CACs).During adsorption,the adsorbents are coated with a layer of hierarchically porous poly(vinylidene fluoride-co-hexafluoropropene)[P(VdF-HFP)HP],which cools the adsorbents to a low temperature under sunlight through radiative cooling.For desorption,CACs with broad absorption of the solar spectrum are exposed to light irradiation for heating.The heating and cooling processes are completely driven by solar energy.Adsorption tests under mimicked sunlight using the CACs show that the performance of this system is comparable to that of the traditional ones.Furthermore,under real sunlight irradiation,the adsorption capacity of the CACs can be well maintained after multiple cycles.The present work may inspire the development of new temperature swing procedures with little energy consumption.
基金supported by the National Natural Science Foundation of China(No.62271109)。
文摘In this paper,a control scheme based on current optimization is proposed for dual three-phase permanent-magnet synchronous motor(DTP-PMSM)drive to reduce the low-frequency temperature swing.The reduction of temperature swing can be equivalent to reducing maximum instantaneous phase copper loss in this paper.First,a two-level optimization aiming at minimizing maximum instantaneous phase copper loss at each electrical angle is proposed.Then,the optimization is transformed to a singlelevel optimization by introducing the auxiliary variable for easy solving.Considering that singleobjective optimization trades a great total copper loss for a small reduction of maximum phase copper loss,the optimization considering both instantaneous total copper loss and maximum phase copper loss is proposed,which has the same performance of temperature swing reduction but with lower total loss.In this way,the proposed control scheme can reduce maximum junction temperature by 11%.Both simulation and experimental results are presented to prove the effectiveness and superiority of the proposed control scheme for low-frequency temperature swing reduction.
文摘This paper delves into the comparative study of tray and packed column pressure swing distillation systems, focusing on the separation of a ternary mixture containing ethanol, tetrahydrofuran (THF), and water. The study particularly emphasizes the production of 99.5 w/w% tetrahydrofuran from the downstream product of 1,4-butanediol synthesis via diethyl maleate. Pro/II simulation software is utilized to explore various system configurations, including sieve trays, valve trays, and packed columns. Material and energy balances are performed to ascertain stream compositions and energy demands. The investigation encompasses the effects of column operating pressure on condenser and reboiler temperatures, as well as the implications of utility streams. A rigorous distillation model is employed to compare valve tray, sieve tray, and random packing (utilizing Norton Super Intalox) column designs by varying the number of trays, reflux ratio, and second distillation column pressure. Heat exchangers are integrated into the model, and their areas and utility flow rates are computed and integrated into the economic assessment. Economic analysis, guided by Net Present Value (NPV) calculations over a 20-year span, drives the selection of the most cost-effective design. Results demonstrate that while all designs are energy-efficient, the packed column system emerges as the most economical choice, offering a comprehensive framework for the separation process. Furthermore, optimal design configurations and operating conditions for both tray and packed column systems are outlined, providing valuable insights for industrial applications.
基金financially supported by the Renewable Energy and Hydrogen Projects in National Key Research & Development Program of China (2019YFB1505000)。
文摘An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.
文摘In 2022,the role of digital economy as a stabilizer and accelerator of the national economy was more prominent.Industry digitalization,which is driven by China’ s intelligent manufacturing,has become the main engine of China’ s digital economy development.As the core component of industrial digitalization,industrial e-commerce also developed in full swing.In the past three years,the COVID-19 pandemic has brought plenty of pressure to China’s industrial economy.
文摘This paper sets up a robotic manipulator model on slewing crane. The model can synthetically describe the dynamic behavior of the load of slewing crane in rotating, elevating and hoisting motions. The dynamic equations of the system are recursively derived by a Newton Euler method. The dynamic behavior of the load of slewing crane in rotating motion is simulated on a computer. The method of robotic dynamics to derive the dynamic equations of the swing of load is accurate and convenient and it has good regularity. The result of the study provides a base in theory on design of crane and an accurate mathematical model for controlling the swing of load.
