Unified Control Theory from PID to ACPID

To address the challenge of achieving unified control across diverse nonlinear systems, a comprehensive control theory spanning from PID (Proportional-Integral-Derivative) to ACPID (Auto-Coupling PID) has been proposed. The primary concept is to unify all intricate factors, including internal dynamics and external bounded disturbance, into a single total disturbance. This enables the mapping of various nonlinear systems onto a linear disturbance system. Based on the theory of PID control and the characteristic equation of a critically damping system, Zeng’s stabilization rules (ZSR) and an ACPID control force based on a single speed factor have been designed. ACPID control theory is both simple and practical, with significant scientific significance and application value in the field of control engineering.

Call for Papers:Special Issue on "Recent Advances and New Directions in Switched Control Systems" ——Jounal of Control Theory and Application

Recently, switched control systems have been attracting much attention m the control community because the problems are not only academically challenging for the inherent complexity, but also of practical importance due to its wide ranges of applications in nature, engineering, and social sciences.

Special Issue on New Trends in Theory and Applications of Complex Control Systems

Complexity is one of the leading features of modem control systems. It is caused by the complex properties of controlled plants and the varied requirements in controller designs. In dealing with the control problems with complexity, in the past two decades, a lot of papers have been published that reported fruitful results on different theoretical backgrounds and with different methodologies, such as differential geometry-based design methods, hybrid system theory, switching control, neural network-based intelligent control, etc.

Equivalent sample theory of networked control systems and its application

The equivalent sample theory and its application in analysis of networked control system （NCS） are presented. After analyzing NCS＇s scheduling in master-slave mode, the characteristics of time delay and sample are summarized. Looking on master station visiting the slave station as a special sample process, the theory of equivalent sample is presented. And based on it, the stability of a kind of NCS is analyzed. The criterion to determine the upper bound of transmission delay is introduced, which guarantees the stability. Finally, an example with simulation shows the availability and usability of this analysis method.

Cloud Control Systems

The concept of cloud control systems is discussed in this paper, which is an extension of networked control systems (NCSs). With the development of internet of things (IOT), the technology of NCSs has played a key role in IOT. At the same time, cloud computing is developed rapidly, which provides a perfect platform for big data processing, controller design and performance assessment. The research on cloud control systems will give new contribution to the control theory and applications in the near future. © 2014 Chinese Association of Automation.

Reliability and sensitivity analysis of loop-designed security and stability control system in interconnected power systems

Security and stability control system(SSCS)in power systems involves collecting information and sending the decision from/to control stations at different layers;the tree structure of the SSCS requires more levels.Failure of a station or channel can cause all the execution stations(EXs)to be out of control.The randomness of the controllable capacity of the EXs increases the difficulty of the reliability evaluation of the SSCS.In this study,the loop designed SSCS and reliability analysis are examined for the interconnected systems.The uncertainty analysis of the controllable capacity based on the evidence theory for the SSCS is proposed.The bidirectional and loop channels are introduced to reduce the layers and stations of the existing SSCS with tree configuration.The reliability evaluation and sensitivity analysis are proposed to quantify the controllability and vulnerable components for the SSCS in different configurations.By aiming at the randomness of the controllable capacity of the EXs,the uncertainty analysis of the controllable capacity of the SSCS based on the evidence theory is proposed to quantify the probability of the SSCS for balancing the active power deficiency of the grid.

H_∞ Synchronization of Chaotic Systems via Delayed Feedback Control

The H∞ synchronization problem for a class of delayed chaotic systems with external disturbance is investigated. A novel delayed feedback controller is established under which the chaotic master and slave systems are synchronized with a guaranteed H∞ performance. Based on the Lyapunov stability theory, a delay-dependent condition is derived and formulated in the form of linear matrix inequality （LMI）. A numerical simulation is also presented to validate the effectiveness of the developed theoretical results.

Designing and Optimization of Fuzzy Sliding Mode Controller for Nonlinear Systems

For enhancing the control effectiveness,we firstly design a fuzzy logic based sliding mode controller(FSMC)for nonlinear crane systems.On basis of overhead crane dynamic characteristic,the sliding mode function with regard to trolley position and payload angle.Additionally,in order to eliminate the chattering problem of sliding mode control,the fuzzy logic theory is adopted to soften the control performance.Moreover,aiming at the FSMC parameter setting problem,a DE algorithm based optimization scheme is proposed for enhancing the control performance.Finally,by implementing the computer simulation,the DE based FSMC can effectively tackle the overhead crane sway problem and avoid unexpected accident greatly.

An Algebraic Detection Approach for Control Systems under Multiple Stochastic Cyber-attacks

In order to compromise a target control system successfully, hackers possibly attempt to launch multiple cyberattacks aiming at multiple communication channels of the control system. However, the problem of detecting multiple cyber-attacks has been hardly investigated so far. Therefore, this paper deals with the detection of multiple stochastic cyber-attacks aiming at multiple communication channels of a control system. Our goal is to design a detector for the control system under multiple cyberattacks. Based on frequency-domain transformation technique and auxiliary detection tools, an algebraic detection approach is proposed. By applying the presented approach, residual information caused by different attacks is obtained respectively and anomalies in the control system are detected. Sufficient and necessary conditions guaranteeing the detectability of the multiple stochastic cyber-attacks are obtained. The presented detection approach is simple and straightforward. Finally, two simulation examples are provided, and the simulation results show that the detection approach is effective and feasible. © 2014 Chinese Association of Automation.

Robust H∞ Networked Control for Uncertain Fuzzy Systems with Time-delay

柔韧的 H 联网了控制方法因为有无常和时间的模糊系统推迟的 Takagi-Sugeno (T-S ) 被介绍。一个州的反馈控制器经由联网的控制系统(NCS ) 被设计理论。为有 H 性能的柔韧的稳定性的足够的状况被获得。在网络传播和包退学学生的导致网络的延期被分析。模拟结果显示出这个控制计划的有效性。

Stability analysis and control synthesis of uncertain Roesser-type discrete-time two-dimensional systems

We study the stability analysis and control synthesis of uncertain discrete-time two-dimensional（2D） systems.The mathematical model of the discrete-time 2D system is established upon the well-known Roesser model,and the uncertainty phenomenon,which appears typically in practical environments,is modeled by a convex bounded（polytope type） uncertain domain.The stability analysis and control synthesis of uncertain discrete-time 2D systems are then developed by applying the Lyapunov stability theory.In the processes of stability analysis and control synthesis,the obtained stability/stabilzaition conditions become less conservative by applying some novel relaxed techniques.Moreover,the obtained results are formulated in the form of linear matrix inequalities,which can be easily solved via standard numerical software.Finally,numerical examples are given to demonstrate the effectiveness of the obtained results.

Dissipative-based adaptive neural control for nonlinear systems

A dissipative-based adaptive neural control scheme was developed for a class of nonlinear uncertain systems with unknown nonlinearities that might not be linearly parameterized. The major advantage of the present work was to relax the requirement of matching condition, i.e., the unknown nonlinearities appear on the same equation as the control input in a state-space representation, which was required in most of the available neural network controllers. By synthesizing a state-feedback neural controller to make the closed-loop system dissipative with respect to a quadratic supply rate, the developed control scheme guarantees that the L2-gain of controlled system was less than or equal to a prescribed level. And then, it is shown that the output tracking error is uniformly ultimate bounded. The design scheme is illustrated using a numerical simulation.

Some Kinds of Sheaf Control Problems for Control Systems

Recently, the field of differential equations has been studying in a very abstract method. Instead of considering the behaviour of one solution of a differential equation, one studies its sheaf-solutions in many kinds of properties, for example, the problems of existence, comparison,... of sheaf solutions. In this paper we study some of the problems of controllability for sheaf solutions of control systems.

Optimal traffic light control method for a single intersecti on basedon hybrid systems

A single intersection of two phases is selected as a model to put forward a new optimal time-planning scheme for traffic light based on the model of hybrid automata for single intersection. A method of optimization is proposed for hybrid systems, and the average queue length over all queues is used as an objective function to find an optimal switching scheme for traffic light. It is illustrated that traffic light control for single intersection is a typical hybrid system, and the optimal planning-time scheme can be obtained using the optimal hybrid systems control based on the two stages method.

ADRC based control for a class of input time delay systems

This paper is concerned with the control design and the theoretical analysis for a class of input time-delay systems with stable, critical stable or unstable poles. In order to overcome the time delay, a novel feed-forward compensation active disturbance rejection control(FFC-ADRC) approach is proposed. It combines advantages of the Smith predictor and the traditional active disturbance rejection control(ADRC). The tracking differentiator(TD) is designed to predict the control signal, which adds an anticipatory control to the control signal and allows a higher observer bandwidth to obtain better disturbance rejection. The modified extended state observer(ESO) is designed to estimate both system states and the total disturbances(internal disturbance, uncertainties and delayed disturbance). Then the Lyapunov theory and the theory of the input-output stability are applied to prove the asymptotic stability of the closed-loop control system. Finally, numerical simulations show the effectiveness and practicality of the proposed design.

Evaluation of the Validity of Chaos Theory Based on Systems Thinking for Non-Physicists

Chaos theory was born in the 18th century, physicists still solve the nonlinear dynamic systematic problems within closed-loop systems such as ecosystems, three-body problems involving complexity, and others. Moreover, it has been resolved these problems based on logical thinking using logical solutions with algebra and statistics such as chaos theory. The reason is determinism. Nevertheless, other scientists do not welcome the old chaos theory because the chaos theory is very imperfect and vague. Amazingly, in 2021, there is emerged, and an advanced and systematic solution based on system thinking;it was resolved by a non-physicist on behalf of physicists through interdisciplinary science and it is more perfect than the old chaos theory. Therefore, it is similar to the New World discovered by Columbus. This paper will prove that the existing chaos theory is invalid as a new solution emerges. Nevertheless, current physicists avoid approaching this study as much as possible. Therefore, other scientists have no reason to follow their invalid chaos theory unless physicists prove the validity of chaos theory.

Multivariable Decoupling Predictive Control Based on QFT Theory and Application in CSTR Chemical Process

A novel method of incorporating generalized predictive control GPC algorithms based on quantitative feedback theory QFT principles is proposed for solving the feedback control problem of the highly uncertain and cross-coupling plants. The quantitative feedback theory decouples the multi-input and multi-output MIMO plant and is also used to reduce the uncertainties of the system, stabilize the system, and achieve tracking performance of the system to a certain extent. Single-input and single-output SISO generalized predictive control is used to achieve performance with higher performance. In GPC, the model is identified on-line, which is based on the QFT input and the plant output signals. The simulation results show that the performance of the system is superior to the performance when only QFT is used for highly uncertain MIMO plants.

Controlling Unstable Discrete Chaos and Hyperchaos Systems

A method is introduced to stabilize unstable discrete systems, which does not require any adjustable control parameters of the system. 2-dimension discrete Fold system and 3-dimension discrete hyperchaotic system are stabilized to fixed points respectively. Numerical simulations are then provided to show the effectiveness and feasibility of the proposed chaos and hyperchaos controlling scheme.

考虑时变线阻的多储能SOC稳定均衡控制策略

在直流微电网中,由于线路阻抗大小差异的复杂化,难以保证各储能单元之间达到荷电状态(state-of-charge,SOC)均衡。为此,提出一种考虑时变线阻的SOC均衡改进控制策略。首先,通过线路阻抗和SOC幂指数构造的平衡因子来修正控制系数,提高SOC的辨识度。同时,利用输出电流来约束平衡因子,提高系统的抗扰能力。在SOC均衡之后,SOC平衡因子G变为1,此时依赖线路阻抗信息但不受线路阻抗变化影响,可平稳地保持电流分配。并且结合输出电流构造的电压补偿环节有效地解决了母线电压质量和SOC均衡控制效果之间的矛盾。其次,针对基于SOC均衡的改进控制策略易受恒功率负载影响的问题,利用混合势函数理论进行建模,得到稳定性判据,有利于保障系统的稳定运行。最后,仿真结果表明,所提出的改进下垂控制能够有效地消除线路阻抗的影响,提高电流分配精度,实现SOC均衡,并验证了在各种突发扰动及极端情况下所提控制策略的有效性和正确性。