Crystallographic Analysis of Tapering of ADP Crystallites

On the basis of crystallographic characteristics of ADP (ammonium dihydrogen phosphate) crystals and the selected growth conditions, the growth habit of ADP crystals was studied. In comparison with pyramidal planes, the growth rate of prismatic faces is slower and more sensitive to the additives and impurities for ADP crystals. When the supersaturation is low, the advance of growth steps on prismatic face can be blocked by ethanol or impurities, the crystal morphology is changed from the tetragonal prism to shuttle (i.e., the tapered shape). The tapering formation of ADP crystallites was structurally studied in a novel view.

Silicon-on-Insulator-Based Broadband 1×3 Adiabatic Splitter with Simultaneous Tapering of Velocity and Coupling

We propose and experimentally demonstrate a broadband 1 × 3 adiabatic splitter based on the silicon-on-insulator technology, with simultaneous tapering of velocity and coupling. The designed structure becomes simulated transmission uniformity of three outputs better than 0.5dB in a broadband of 250nm, and a large simulated fabrication tolerance is obtained. A manufactured splitter whose parameters greatly diverge from the design acquires a measured result of the worst splitting ratio better than 1.5dB as well as an excess loss lower than 0.8 dB in a large wavelength range of 80nm. A post-simulation based on the tested splitter obtains a result that meets the actual transmission well.

High-frequency fused high-voltage arc tapering process power supply for of fiber

The performance of the optical fiber coupler prepared with fused biconical taper method is determined by the quality of fused stretching. Besides, the stable high-temperature heat source is the essential guarantee for fused stretching process to go smoothly. The way of using AC （alternating current） arc as the heat source is proposed in this article. In addition, the paper also introduces high-frequency high-voltage power supply with the characteristics of constant current and restricted voltage, which is composed of preceding voltage regulation part and following inverter.

Highly efficient excitation of LP01 mode in ring-core fibers by tapering for optimizing OAM generation

We have demonstrated the highly efficient excitation of the linearly polarized mode(LP01)in ring-core fibers(RCFs)by tapering the spliced point between the RCF and the standard single-mode fiber(SMF)to optimize all-fiber orbital angular momentum(OAM)generation.The tapering technique has been investigated theoretically and experimentally.Before tapering,only 50%of light can be coupled from SMFs to RCFs.The modal interference spectrum with an extinction ratio(ER)of～9 dB is observed,showing that higher-order modes are excited in RCF.By tapering the spliced point,90%of light is coupled,and the ER is minimized to be～2 dB,indicating that the higher-order modes are effectively suppressed by tapering.Such tapered spliced points of RCF–SMF are further applied for all-fiber OAM generation.The efficiencies of OAM+1 and OAM?1 generation are found to be enhanced by approximately 11.66%and 12.41%,respectively,showing that the tapered spliced point of the RCF–SMF is a feasible way to optimize OAM generation.

Fibre tapering using plasmonic microheaters and deformation-induced pull

Optical fibres with diameters at micro-or sub-micrometre scale are widely adopted as a convenient tool for studying light–matter interactions.To prepare such devices,two elements are indispensable:a heat source and a pulling force.In this paper,we report a novel fibre-tapering technique in which micro-sized plasmonic heaters and elaborately deformed optical fibres are compactly combined,free of flame and bulky pulling elements.Using this technique,micro-nano fibres with abrupt taper and ultra-short transition regions were successfully fabricated,which would otherwise be a challenge for traditional techniques.The compactness of the proposed system enabled it to be further transferred to a scanning electron microscope for in-situ monitoring of the tapering process.The essential dynamics of“heat and pull”was directly visualised with nanometre precision in real time and theoretically interpreted,thereby establishing an example for future in-situ observations of micro and nanoscale light-matter interactions.

Modal interferometer based on tapering single-mode-multimode-single-mode fiber structure by hydrogen flame

A modal interferometer is experimentally demonstrated based on tapering a single-mode-multimode-single- mode （SMS） fiber structure heated by hydrogen flame. The interference fringe begins to form when tapering length is 19.8 mm, and becomes regular and clear when the tapering length is longer and the tapered waist diameter is smaller. Annealing process is undertaken to achieve a high extension ratio of approximately 17 dB with free spectral range of 1.5 nm when the tapering length is 33 mm and the tapered waist diameter is approximately 5 μm. The temperature and axial strain dependences of the tapered SMS structure are characterized, and the measured temperature and strain coefficients are ＋7 pm/℃ and -9.536 pm/με, respectively.

Ultra-compact fiber tapering:plasmonics and structural bending as new combination of heat and pull

Fabrication of optical fiber tapers is realized with a combination of plasmonic microheaters and specially designed structural bending of optical fibers,which provide the necessary elements of"heat and pull".The resultant compactness and flame-free condition enable monitoring of the tapering process inside a scanning electron microscope.

Sandwich structures with tapered tubes as core:A quasi-static investigation

In this article,the experimental and finite element analysis is utilized to investigate the quasi-static compression features of sandwich constructions built with tapered tubes.3D printing technology was utilized to create the hollow centers of the tapering tubes,with and without corrugations.The results demonstrate that the energy absorption(EA)and specific energy absorption(SEA)of the single corrugated tapered tube sandwich are 51.6% and 19.8% higher,respectively,than those of the conical tube sandwich.Furthermore,the results demonstrate that energy absorbers can benefit from corrugation in order to increase their efficiency.Additionally,the tapered corrugated tubes'resistance to oblique impacts was studied.Compared to a straight tube,the tapered tube is more resistant to oblique loads and has a lower initial peak crushing force(PCF),according to numerical simulations.After conducting a parametric study,it was discovered that the energy absorption performance of the sandwich construction is significantly affected by the amplitude,number of corrugations,and wall thickness.EA and SEA of DTS with corrugation number of 8 increased by 17.4%and 29.6%,respectively,while PCF decreased by 9.2% compared to DTS with corrugation number of 10.

Longitudinal vibration characteristics of a tapered pipe pile considering the vertical support of surrounding soil and construction disturbance

This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.

Mechanism of Thermally Radiative Prandtl Nanofluids and Double-Diffusive Convection in Tapered Channel on Peristaltic Flow with Viscous Dissipation and Induced Magnetic Field

The application of mathematical modeling to biological fluids is of utmost importance, as it has diverse applicationsin medicine. The peristaltic mechanism plays a crucial role in understanding numerous biological flows. In thispaper, we present a theoretical investigation of the double diffusion convection in the peristaltic transport of aPrandtl nanofluid through an asymmetric tapered channel under the combined action of thermal radiation andan induced magnetic field. The equations for the current flow scenario are developed, incorporating relevantassumptions, and considering the effect of viscous dissipation. The impact of thermal radiation and doublediffusion on public health is of particular interest. For instance, infrared radiation techniques have been used totreat various skin-related diseases and can also be employed as a measure of thermotherapy for some bones toenhance blood circulation, with radiation increasing blood flow by approximately 80%. To solve the governingequations, we employ a numerical method with the aid of symbolic software such as Mathematica and MATLAB.The velocity, magnetic force function, pressure rise, temperature, solute (species) concentration, and nanoparticlevolume fraction profiles are analytically derived and graphically displayed. The results outcomes are compared withthe findings of limiting situations for verification.

Recursive impedance inversion of ground-penetrating radar data in stochastic media

The travel time and amplitude of ground-penetrating radar （GPR） waves are closely related to medium parameters such as water content, porosity, and dielectric permittivity. However, conventional estimation methods, which are mostly based on wave velocity, are not suitable for real complex media because of limited resolution. Impedance inversion uses the reflection coefficient of radar waves to directly calculate GPR impedance and other parameters of subsurface media. We construct a 3D multiscale stochastic medium model and use the mixed Gaussian and exponential autocorrelation function to describe the distribution of parameters in real subsurface media. We introduce an elliptical Gaussian function to describe local random anomalies. The tapering function is also introduced to reduce calculation errors caused by the numerical simulation of discrete grids. We derive the impedance inversion workflow and test the calculation precision in complex media. Finally, we use impedance inversion to process GPR field data in a polluted site in Mongolia. The inversion results were constrained using borehole data and validated by resistivity data.

MOTION ANALYSIS OF TAPER MACHINING USING FOUR-AXIS WEDM MACHINE TOOL

The configuration and the reference frame of the four-axis wire-electric discharge machining （WEDM） machine tool are introduced. Based on the motion analysis of the four-axis WEDM machine tool, an algorithm for controlling the four-axis motion is proposed. The algorithm is applicable to both the invariable and variable taper machining. Motion loci of the machining platform and the wire guiding head are deduced by the algorithm according to the bottom surface locus of the workpiece and the taper angle. The algorithm is used in the CNC system of the four-axis WEDM machine tool and confirmed to be effective.

一种多模干涉耦合器的性能模拟

为减小多模干涉(Multimode Interference,MMI)耦合器件的尺寸,提出一种多模波导宽度为指数型变化的Taper结构.理论分析了多模波导长度与该Taper结构的参量之间的关系.与已被用于减小MMI器件尺寸的抛物线型Taper结构相比,该结构可进一步减小器件的尺寸.就几种波导结构参量下的MMI耦合器,利用宽角光束传播法进行了数值模拟.结果表明,指数型MMI耦合器的性能与抛物线型MMI耦合器的性能类似.指数型Taper结构可以用于MMI器件以减小该类器件的尺寸.

Measurement of refrative index based on fiber Mach-Zehnder interference

In order to detect the refractive index of liquid with high precision,based on modular interference,Mach-Zehnder optical fiber refractive rate sensor was studied.Sensor structure is composed of ordinary single-mode fiber and multimode fiber,according to the singlemode multimode singlemode sequence to fuse together,and the fused optical fiber is used to process the taper.As a result,the diameter of the sensing head is about 10μm.Experimental results show that,as liquid refractive index increases range from 1.33 to 1.35,the loss peak of the transmission spectrum will shift to long wave direction.

Design and Fabrication of Ultracompact 3-dB MMI Coupler in Silicon-on-Insulator

An ultracompact 3 dB coupler is designed and fabricated in silicon on insulator,based on 1×2 line tapered multimode interference (MMI) coupler.Comparing with the conventional straight MMI coupler,the device is ～40% shorter in length.The device exhibits uniformity of 1 3dB and excess loss of 2 5dB.

Range walk and array rotation in space-time adaptive processing:effects and compensations

This paper proposes a unified clutter model incorporating the effects of range walk and array rotation for space-time adaptive processing（STAP） in airborne multi-channel early-warning radar.Based on this clutter model,STAP performance is then analyzed from the perspective of covariance matrix tapering（CMT）.For STAP performance degradation due to array rotation,a determinate compensation method is proposed based on the CMT method.Numerical examples are provided to verify the analysis and the proposed compensation method.

少穗竹种质秆形结构建模研究

通过对少穗竹的胸径、竹高、枝下高、节间长等秆形因子进行了调查分析,结果表明:立竹胸径与竹高具有显著相关性,最佳拟合方程为H=0.1373D+2.1639(R=0.976),H=0.4401D0.7726(R=0.979);立竹胸径与枝下高相关性系数不高;尖削度最佳拟合方程为Y=0.0011X3-0.0246X2+0.0399X+1.0266(R=0.997);节间长随高度的增加先增大,后减小,最大节间长出现在第9～11节处,节长与节间的最佳拟合方程为Y=0.006X3-0.3997X2+6.7965X+9.1536(R=0.984)。

Assessing the spillover effects of U.S.monetary policy normalization on Nigeria sovereign bond yield

This study examines the spillover effects of U.S.monetary policy normalization on Nigeria 10-Year Treasury bond yield between 2011 and 2017,using the vector error correction model approach.Our results reveal that domestic factors,such as exchange rate and inflation,rather than the U.S.10-Year sovereign bond yield,are the key drivers of Nigeria 10-Year bond yield.Additionally,the spillover effect from the U.S.monetary policy was amplified by oil price shocks and changes in Nigeria’s monetary policy rates.Our counterfactual analysis confirms the findings.

Design of Tapered Rib Spot-Size Converter with Double-Cladding Structure

A novel structure of spot size converter is designed to allow low loss and large alignment tolerance between single mode rib waveguide devices and fiber arrays theoretically.The spot size converter consists of a tapered rib core region and a double cladding region.Through optimizing parameters,an expanded mode field can be tightly confined in the inner cladding and thus radiation loss be reduced largely at the tapered region.The influence of refractive index and thickness of the inner cladding on coupling loss is analyzed in particular.A novel,easy method of fabricating tapered rib spot size converter based on silicon on insulator material is proposed.

两种根管预备方法在牙齿根管治疗中临床效果比较

目的:分析讨论在根管治疗过程中,对比Pro Taper机用镍钛器械与手用不锈钢K锉预备根管的临床疗效,观察根管治疗期间患者的疼痛反应的情况,为Pro Taper机用镍钛器械的应用提供一定临床依据.方法:通过对我院曾经收治的80名患者,随机分为两组即观察组和对照组各为40例,观察组应用机用鎳钛锉使用冠根向预备方法进行根管预备,对照组使用不锈钢K锉用传统的逐步后退法预备根管.观察并记录两组患者根管预备后的临床疗效,比较并分析治疗结果的差异.结果:80例患者经过不同方法治疗后,观察组的40位患者中,经机用镍钛器械根管预备后封药,一周内有疼痛反应的为5例,疼痛的发生率为12.5%.对照组的40例经手用不锈钢K锉用传统的逐步后退法进行根管预备,预备后同样封药一周,出现疼痛的14例.疼痛的发生率为35%.结论:在根管治疗的过程中应用新的方法鎳钛锉预备根管比传统的逐步后退法预备根管,无论是根管治疗中还是根管充填后,都有非常显著的优点,在临床上具有可行性和优越性,值得提倡推广和广泛应用.